GridSorter – Dezentral gesteuertes Materialflusssystem zum Transport unterschiedlich großer Ladungsträger

Der GridSorter ist ein neuartiges Fördersystem zur effizienten und platzsparenden Sortierung von Gütern. Durch seine dezentrale Steuerung und den modularen Aufbau aus baugleichen rechteckigen Fördermodulen lässt er sich leicht an sich verändernde Anforderungen anpassen. In diesem Artikel wird ein neuer Reservierungsalgorithmus vorgestellt, welcher den Transport von Ladungsträgern erlaubt, die größer sind als ein Fördermodul. Dadurch wird nicht nur die Menge an möglichen Transportgütern erweitert, sondern es kann, wie in einer Simulation gezeigt wird, auch eine Effizienzsteigerung durch eine Verringerung der Modulgröße erreicht werden.

Improving Wood Fuel Pellets for Household Use : Perspectives on Quality, Efficiency and Environment

Bioenergy is one of many contributors to reducing the use of fossil fuels in order to mitigate climate change by decreasing CO2-emissions, and the potential for biofuels are large. The wood fuel pellets are a refined biofuel made of sawdust, which is dried and compressed to achieve improved fuel and transportation properties. In 2007 the amount of wood fuel pellets used for heating purposes in Sweden was 1715000 tons. The aims of this work was: to examine the moisture content and emission of monoterpenes during the drying and pelletising steps of the pellets production (Paper I); to investigate how the recirculation of drying gases affects the energy efficiency of rotary dryers and how the energy efficiency is related to the capacity of the dryer. (Paper II); to analyse the causes of the problems encountered by household end-users of pellets and investigate whether an improved pellet quality standard could reduce these problems (Paper III); to investigate how the energy consumption of the pelletising machine and chosen pellet quality parameters were affected using an increased amount of rapeseed cake in wood fuel pellets (Paper IV); and to identify gaps of knowledge about wood fuel pellet technology and needs for further research on quality, environmental and health aspects throughout the wood fuel pellet chain, from sawdust to heat. (Paper V).

Endodontia

O tratamento endodôntico é um procedimento comum em medicina dentária, tradicionalmente é realizado em múltiplas sessões, com medicação intracanalar entre sessões, para reduzir ou eliminar os microrganismos e os seus produtos antes da obturação, mas o conceito de tratamento numa sessão não é novo e nos últimos anos tem sido mais incorporado na prática clínica. O uso de técnicas endodônticas e equipamentos contemporâneos têm revolucionado os procedimentos endodônticos de modo a que seja possível a realização do tratamento endodôntico em uma única sessão, não só por aumentarem a taxa de sucesso do tratamento endodôntico, mas também por reduzirem o tempo necessário para o tratamento. A realização do tratamento numa única sessão tem vindo a ganhar aceitação como sendo o melhor tratamento na maioria dos casos, sendo que alguns endodontistas acreditam que existem poucos casos que não possam ser tratados com sucesso em uma única sessão. Dada a tendência para uma sociedade cada vez com um ritmo mais acelerado, este tipo de tratamento tem-se tornado o tratamento de eleição e habitualmente o tipo de tratamento preferido pelos pacientes Este trabalho tem como objetivo fazer uma revisão sobre o debate da realização do tratamento endodôntico em uma ou múltiplas sessões, avaliando todas as vantagens e desvantagens da realização do tratamento endodôntico numa sessão, comparativamente ao tratamento endodôntico em múltiplas sessões, bem como as suas indicações e contraindicações, de modo a proporcionar ao médico dentista uma informação atualizada desta abordagem clínica.

Measurement of fusional vergence: protocol for a systematic review

Introduction - No validated protocol exists for the measurement of the prism fusion ranges. Many studies report on how fusional vergence ranges can be measured using different techniques (rotary prism, prism bar, loose prisms and synoptophore) and stimuli, leading to different ranges being reported in the literature. Repeatability of the different methods available and the equivalence between them it is also important. In addition, some studies available do not agree in what order fusional vergence should be measured to provide the essential information on which to base clinical judgements on compensation of deviations. When performing fusional vergence testing the most commonly accepted clinical technique is to first measure negative fusional vergence followed by a measurement of positive fusional vergence to avoid affecting the value of vergence recovery because of excessive stimulation of convergence. Von Noorden recommend using vertical fusion amplitudes in between horizontal amplitudes (base-out, base-up, base-in, and base down) to prevent vergence adaptation. Others place the base of the prism in the direction opposite to that used to measure the deviation to increase the vergence demand. Objectives - The purpose of this review is to assess and compare the accuracy of tests for measurement of fusional vergence. Secondary objectives are to investigate sources of heterogeneity of diagnostic accuracy including: age; variation in method of assessment; study design; study size; type of strabismus (convergent, divergent, vertical, cycle); severity of strabismus (constant/intermittent/latent).

Análise comparativa "in vitro" da extrusão apical de detritos originados por diferentes técnicas de instrumentação do sistema de canais radiculares

Introdução: A extrusão apical detritos (EAD) consequência indesejável da instrumentação canalar pode ser associada a dor/edema, podendo atrasar a cicatrização periapical. O nosso trabalho teve como objectivo avaliar e quantificar a EAD em canais instrumentados por sistemas de instrumentação rotatória contínua e reciprocante. Materiais e Métodos: 80 dentes monocanalares sem tratamento endodôntico prévio foram aleatoriamente divididos em 4 grupos (n=20): One Shape® Protaper® NEXT, Hyflex® EDM e WaveOne® Gold. Um tubo de Eppendorf (TdE) foi pesado antecipadamente numa balança analítica de precisão e com um dente inserido foi montado num dispositivo modificado, similar ao método descrito por Myers & Montgomery. Os canais foram instrumentados e irrigados com água destilada. Os dentes instrumentados foram removidos dos TdE e estes preenchidos com água destilada até perfazer 1,5ml, incubados a 70ºC durante cinco dias sendo pesados novamente, calculando a diferença entre o peso inicial e final determinando o peso dos detritos. Os dados foram analisados estatisticamente utilizando o IBM SPSS Statistics 22, considerando α=0,05. Efetuaram-se testes Kruskal-Wallis e post-hoc com ajustamento do ρ-value pelo método Dunn-Bonferroni. Resultados: Houve EAD em todas as técnicas de instrumentação. A análise estatística mostrou haver diferenças significativas na EAD entre as técnicas utilizadas (α=0,002). Entre as técnicas WaveOne® Gold e One Shape® (α=0,003), WaveOne® Gold e Protaper® NEXT (α=0,023) e WaveOne® Gold e Hyflex® EDM (α=0,028). Conclusões: A técnica One Shape® apresentou menor EAD e a técnica WaveOne® Gold com movimento reciprocante constitui maior fator de risco tendo apresentado maior EAD. Os resultados deste estudo indicam que os profissionais devem estar cientes para a EAD que pode ocorrer com cada instrumento, o que poderá servir de base para a selecção de um instrumento particular. Implicações clínicas: A escolha do sistema de instrumentação canalar influencia a extrusão de detritos. Fontes de financiamento: Agradecimentos as empresas; Micro-Mega, França, COLTÉNE e Dentsply Maillefer, Suíça.

DESIGN, FABRICATION, AND PERFORMANCE CHARACTERIZATION OF MULTIFUNCTIONAL STRUCTURES TO HARVEST SOLAR ENERGY FOR FLAPPING WING AERIAL VEHICLES

Flapping Wing Aerial Vehicles (FWAVs) have the capability to combine the benefits of both fixed wing vehicles and rotary vehicles. However, flight time is limited due to limited on-board energy storage capacity. For most Unmanned Aerial Vehicle (UAV) operators, frequent recharging of the batteries is not ideal due to lack of nearby electrical outlets. This imposes serious limitations on FWAV flights. The approach taken to extend the flight time of UAVs was to integrate photovoltaic solar cells onto different structures of the vehicle to harvest and use energy from the sun. Integration of the solar cells can greatly improve the energy capacity of an UAV; however, this integration does effect the performance of the UAV and especially FWAVs. The integration of solar cells affects the ability of the vehicle to produce the aerodynamic forces necessary to maintain flight. This PhD dissertation characterizes the effects of solar cell integration on the performance of a FWAV. Robo Raven, a recently developed FWAV, is used as the platform for this work. An additive manufacturing technique was developed to integrate photovoltaic solar cells into the wing and tail structures of the vehicle. An approach to characterizing the effects of solar cell integration to the wings, tail, and body of the UAV is also described. This approach includes measurement of aerodynamic forces generated by the vehicle and measurements of the wing shape during the flapping cycle using Digital Image Correlation. Various changes to wing, body, and tail design are investigated and changes in performance for each design are measured. The electrical performance from the solar cells is also characterized. A new multifunctional performance model was formulated that describes how integration of solar cells influences the flight performance. Aerodynamic models were developed to describe effects of solar cell integration force production and performance of the FWAV. Thus, performance changes can be predicted depending on changes in design. Sensing capabilities of the solar cells were also discovered and correlated to the deformation of the wing. This demonstrated that the solar cells were capable of: (1) Lightweight and flexible structure to generate aerodynamic forces, (2) Energy harvesting to extend operational time and autonomy, (3) Sensing of an aerodynamic force associated with wing deformation. Finally, different flexible photovoltaic materials with higher efficiencies are investigated, which enable the multifunctional wings to provide enough solar power to keep the FWAV aloft without batteries as long as there is enough sunlight to power the vehicle.

Avaliação da biodegradabilidade de petróleo utilizando microrganismos isolados do estuário do Rio Potengi (RN)

The oil activity in the Rio Grande do Norte State (RN) is a permanent threat to coastal ecosystems, particularly mangroves, with the possibility of oil spills. In this context, the objective of this study was to evaluate the potential resistance of the mangrove environment of a possible spill. Were selected and isolated microorganisms degrading oil by the technique of enrichment cultures and formation of a bacterial consortium. The kinetic study of the consortium was held in rotary incubator shaken at 150 rpm and 30° C. Samples were taken at intervals of 4 hours for analysis of cell concentration and surface tension. The biodegradation was monitored using two methods of respirometry: manometric (OxiTop-C ®) and conductivimetry, where the biodegradation of oil was estimated indirectly by oxygen consumption and CO2 production, respectively. Furthermore, it was used a full 2² factorial design with triplicate at central point to the runs that used the conductivimetric methodology.. The technique of enrichment cultures allowed to obtain thirteen bacterial strains. Kinetic study of the consortium, we can showed the absence of the lag phase, reaching a maximum cell concentration of 2.55 g / L at 16 h of cultivation and a reduction on surface tension. When we adopted the methodology of OxiTop-C was detected a band indicating biodegradability (1% oil v/v), however when we used the conductivimetry methodology did not observe any band that would indicate effective biodegradation. By monitoring a process of biodegradation is necessary to observe the methodology will be adopted to evaluate the biodegradation process, since for the same conditions adopted different methodologies can produce different results. The oil-degrading isolates from soils of the mangrove estuary Potengi / RN are largely to be used in bioremediation strategies of these places, in the case of a possible oil spill, or it can be used in the treatment of waste oil generated in saline environments, since they are optimized the conditions of the tests so that the efficiency of biodegradation reach the minimum level suggested by the standarts

The Amplifier - v. 11, no. 2

In this issue...Continental Oil Company, Big Butte, Bolivia, Rotary Scholarship, YMCA, Anaconda Company, Butte Wesley Foundation, American Yearbook Company

The Amplifier - v. 12, no. 5

In this issue...Canyon Creek Mine, Mineral Club, Geophysics Club, Rotary Foundation, Phil Judd, NASA, State Highway Department, Gasamat, Campus Parking

The Amplifier - v. 15, no. 11

In this issue...Rotary Club, Petroleum Scholarship, Ossello's, Century Club, Lunch-In, Coach Stephens, Butte Civic Center, Continental Oil Company, Volunteer Military

The Amplifier - v. 17, no. 7

In this issue...Marcus Daly, Life Insurance, Butte Walk for Mankind, library Building, peace Corps, VISTA, Egg Drop, College Days, Student Council, Mountaineer Club

Dizziness in 10 year old children:an epidemiological study

OBJECTIVE: Current data about the prevalence and characteristics of dizziness in the paediatric population is very limited and the generalisability of extant studies to the UK population has not been explored. Our study aims to provide a robust estimate of the prevalence of dizziness in 10 year old children in the UK, to describe the characteristics of this dizziness and to explore whether this dizziness is socially patterned. METHODS: Data from the Avon Longitudinal Study of Parents and Children (ALSPAC) was analysed (N=13,988). A total of 6965 of these children attended for a balance assessment session at age 10. Those who reported rotary vertigo were interviewed about their symptoms. Logistic regression was used to explore whether dizziness at age 10 is socially patterned. RESULTS: A total of 400 children reported rotary vertigo, giving a prevalence estimate of 5.7% [CI 5.2, 6.3%]. 13.1-20.6% of children reported experiencing their dizziness between 1 and 4 times a week (depending on the symptom). 51.5% of children had to stop what they were doing because of the dizziness making them feel unwell. A total of 60% of children reported headache as an accompanying symptom, tentatively suggesting a diagnosis of migraine, although there was no association between reports of headache and a maternal family history of migraine. 20.3% of children with dizziness also reported tinnitus and 17.3% reported that their hearing changed when they were dizzy. CONCLUSIONS: Dizziness in 10 year old children is not uncommon and in about half limits current activities. Rotary vertigo is commonly accompanied by dizziness of another description and also by headache. There is no evidence that dizziness at this age is socially patterned.

Exploring nest destruction and bird mortality in mown Mediterranean dry grasslands: an increasing threat to grassland bird conservation

In recent years, haying has extended to Iberian Mediterranean dry grasslands potentially impacting on grassland bird ecology. We evaluated the impact of haying on a grassland bird community of South Portugal. Our main goals were: (1) to investigate the exposure of different species to haying, (2) to investigate potential removal of nests and dead birds from hayed fields by haying machinery using the ratio (REC) between the expected number of records and the number of records collected and (3) to link clutch destruction and bird mortality with haying management practices. Hayed fields were surveyed for signs of breeding and birds censused prior to mowing. Linear models were computed, linking the REC with haying machinery and sward properties. GLMs and model averaging were used to obtain models linking clutch destruction, bird mortality and haying management variables. Only 4 % of records evidenced successful nesting attempts (N = 177). REC evaluation suggested high nest or dead bird removal by the machinery, particularly in fields with lower vegetation biomass prior to cutting. Sickle bar mowers and one-rotor rotary rakes returned higher REC but lower probability of found nests removed from the original nesting sites comparatively to discs mowers and wheel rakes. Higher probabilities of mortality events were found in fields mown earlier (but not in all years). On the other hand, lower mortality was found in fields raked with two-rotor rotary rakes. Delayed haying, silage production in temporary crops and the use haying machinery enabling simultaneously mowing and gathering hay in lines are discussed as management alternatives.

Development of sexing systems functional to mass production of Aedes albopictus sterile males

Aedes albopictus is a vector able to transmit several arboviruses. Due to its high impact on human health, it is important to develop an efficient control strategy for this pest. Nowadays, control based on chemical insecticides is limited by the number of available active principles and the occurrence of resistance. A valuable alternative to the conventional control strategies is the sterile insect technique (SIT) which relies on releasing sterile males of the target insect. Mating between wild females and sterile males results in no viable offspring. A crucial aspect of SIT is the production of a large number of sterile males with a low presence of females that can bite and transmit viruses. The present thesis aimed to find, implement and study the most reliable mechanical sex sorter and protocol to implement male productivity and reduce female contamination. In addition, I evaluated different variables and sorting protocols to enable female recovery for breeding purposes. Furthermore, I studied the creation of a hyper-protandric strain potentially able to produce only males. I also assessed the integration of artificial intelligence with an optical unit to identify sexes at the adult stage. All these applications helped to realise a mass production model in Italy with a potential weekly production of 1 million males. Moreover, I studied and applied for aerial sterile male release in an urban environment. This technology could allow the release of males in a wide area, overcoming environmental and urban obstacles. However, the development and application of drone technologies in a metropolitan area close to airports, such as in Bologna area, must fit specific requirements. Lastly, at Réunion Island, during a Short Term Scientific Mission France (AIM-COST Action), Indian Ocean, I studied the Boosted SIT application. Coating sterile males with Pyriproxyfen may help spread the insecticide into the larval breeding sites.

Diazene photoswitches in artificial molecular machines and light-effected materials

The research developed in this thesis focused on the spectroscopic and photochemical characterization of molecular diazene photoswitches, both as individual species and as functional components of mechanically interlocked molecules, molecular-based materials and artificial molecular machines and motors. Among the plethora of photochromes reported so far, azobenzene is the most versatile photoswitch due to its reproducible and well-established photochemical properties. Part I of this thesis work focuses on the characterization of light-responsive supramolecular systems based on azobenzene: a photochemically-driven rotary motor, a light-responsive supramolecular polymeric material and a supramolecular system capable of photoinduced entantiodiscrimination. Despite the wide success of azobenzene photoswitches, the tunability of their photochemical properties as a function of the diversified substitution pattern on its aryl ring presents intrinsic limitations. To overcome this issue, in the last decade heteroaryl azoswitches (i.e., azobenzene having heterocyclic rings in place of one or both phenyl groups) have attracted a great deal of attention. Hence, Part II of this thesis work treats the photochemical characterization of two different families of azoheteroarenes embedding imidazolium and thienyl functionalities in their structures. Their potential implementation in water-soluble artificial molecular machines and light-effected semiconductor materials is also assessed.