Le pouvoir impérial romain et les cultes isiaques à Rome (IIIe-IVe siècles)

Les cultes isiaques se répandent autour du bassin méditerranéen entre le IVe s. av. et la fin du IVe s. apr. J.-C., arrivant à Rome au Ier siècle av. notre ère et y disparaissant conjointement aux cultes païens traditionnels avec ou peu après le coup porté par Théodose. Leur diffusion romaine s’étale donc sur une grande partie de l’histoire de l’Empire d’Occident, et ils vont ainsi se retrouver face à l’homme désormais considéré comme primus inter pares, grâce à l’accumulation de ses pouvoirs. L’empereur est pontifex maximus, c’est-à-dire maitre des cultes publics et du droit religieux, et il est ainsi l’agent du pouvoir qui a le potentiel religieux et législatif pour avoir un discours varié sur les autres traditions religieuses. Il semble donc inévitable que la sphère cultuelle isiaque rencontre et interagisse avec la sphère religieuse traditionnelle romaine, et que certains empereurs interfèrent, par renforcement ou au contraire par opposition, avec les cultes isiaques arrivés peu de temps avant l’avènement du pouvoir impérial. Cette thèse se propose non seulement d’étudier la dialectique entre institué romain (la force d’inertie) et instituant isiaque (la force de changements) dans la direction d’une potentielle altérité incluse (soit le dialogue évolutif du Nous par rapport à l’Autre), mais notamment par les liens publics romains et évolutifs entre l’empereur et les divinités isiaques. Nous effectuons cette recherche grâce à quatre types de sources antiques : la littérature pour le point de vue de l’élite littéraire gréco-romaine ; les inscriptions isiaques pour une définition surtout populaire de l’identité évolutive de l’instituant isiaque ; les monnaies et les oeuvres monumentales pour le point de vue public (et parfois plus personnel) impérial. Nous concentrons notre étude à partir de la dynastie sévérienne, qui laisse supposer que les cultes romano-orientaux profitent de la nouvelle configuration impériale avec des empereurs originaires d’Afrique et d’Orient, dans un phénomène d’« impérialisation » isiaque intensifié par un engagement tant impérial que populaire. En outre, nous nuancerons les conséquences sur la diffusion isiaque des troubles qui surviennent dans la deuxième moitié du IIIe siècle. Enfin, le IVe siècle, avec la christianisation de l’Empire et donc un christianisme devenant institué, ouvre sur une analyse des débats entre les défenseurs actifs du paganisme et les auteurs chrétiens, et de là, vers des interrogations sur l’intervention de la sphère isiaque dans ce face-à-face.

Supramolecular Organization of Metal Nanoparticles in Solution and of Phenyleneethynylenes on Surfaces

Most of the procedures reported for the synthesis of metal nanoparticles involve the use of strong reducing agents or elevated temperatures. This limits the possibility of developing metal nanoparticle based sensors for the in situ detection of analytes. One of the objectives of the present investigations is to (i) develop newer methodologies for the synthesis of metal nanoparticles in aqueous medium at ambient conditions and (ii) their use in the detection of metal cations by taking advantage of the unique coordination ability. Ideally, biocompatible molecules which possess both the reducing and stabilizing groups are desirable for such applications. Formation of stable supramolecular assembly, by bringing metal nanoparticles close to each other, results in plasmon coupling and this strategy can be effectively utilized for the development of metal nanoparticle based sensors.Another objective of the present study is to understand the supramolecular organization of molecules on surfaces. Various noncovalent interactions between the molecules and with surface play a decisive role in their organizations. An in-depth understanding of these interactions is essential for device fabrications. Recent photophysical studies have revealed that phenyleneethynylene based molecular systems are ideal for device application. The second objective of the thesis focuses on understanding the (i) organization of phenyleneethynylenes on highly oriented pyrolytic graphite (HOPG) surface with atomic level precision and (ii) weak intermolecular interactions which drive their organization.

Novel Melt Transurethane Process for Cycloaliphatic Polyurethanes and Their Self-Organization for Nano-Materials

In this introduction part, importance has been given to the elastomeric properties of polyurethanes. Emphasis has been laid to this property based on microphase separation and how this could be modified by modifying the segment lengths, as well as the structure of the segments. Implication was also made on the mechanical and thermal properties of these copolymers based on various analytical methods usually used for characterization of polymers. A brief overview of the challenges faced by the polyurethane chemistry was also done, pointing to the fact that though polyurethane industry is more than 75 years old, still a lot of questions remain unanswered, that too mostly in the synthesis of polyurethanes. A major challenge in this industry is the utilization of more environmental friendly “Green Chemistry Routes” for the synthesis of polyurethanes which are devoid of any isocyanates or harsh solvents.The research work in this thesis was focused to develop non-isocyanate green chemical process for polyurethanes and also self-organize the resultant novel polymers into nano-materials. The thesis was focused on the following three major aspects:(i) Design and development of novel melt transurethane process for polyurethanes under non-isocyanate and solvent free melt condition. (ii) Solvent induced self-organization of the novel cycloaliphatic polyurethanes prepared by the melt transurethane process into microporous templates and nano-sized polymeric hexagons and spheres. (iii) Novel polyurethane-oligophenylenevinylene random block copolymer nano-materials and their photoluminescence properties. The second chapter of the thesis gives an elaborate discussion on the “Novel Melt Transurethane Process ” for the synthesis of polyurethanes under non-isocyanate and solvent free melt condition. The polycondensation reaction was carried out between equimolar amounts of a di-urethane monomer and a diol in the presence of a catalyst under melt condition to produce polyurethanes followed by the removal of low boiling alcohol from equilibrium. The polymers synthesized through this green chemical route were found to be soluble (devoid of any cross links), thermally stable and free from any isocyanate entities. The polymerization reaction was confirmed by various analytical techniques with specific references to the extent of reaction which is the main watchful point for any successful polymerization reaction. The mechanistic aspects of the reaction were another point of consideration for the novel polymerization route which was successfully dealt with by performing various model reactions. Since this route was successful enough in synthesizing polyurethanes with novel structures, they were employed for the solvent induced self-organization which is an important area of research in the polymer world in the present scenario. Chapter three mesmerizes the reader with multitudes of morphologies depending upon the chemical backbone structure of the polyurethane as well as on the nature and amount of various solvents employed for the self-organization tactics. The rationale towards these morphologies-“Hydrogen Bonding ” have been systematically probed by various techniques. These polyurethanes were then tagged with luminescent 0ligo(phenylene vinylene) units and the effects of these OPV blocks on the morphology of the polyurethanes were analyzed in chapter four. These blocks have resulted in the formation of novel “Blue Luminescent Balls” which could find various applications in optoelectronic devices as well as delivery vehicles.

Wirtschaft an der Grenze. Studien zum Wirtschaftsleben in römischen Militärlagern im Norden Britanniens

Die wichtigsten Quellen für die Erforschung des Wirtschaftsleben in den Militärlagern im Norden Britanniens sind die im Kastell Vindolanda gefundenen Holztäfelchen mit Texten aus dem Lageralltag von ca. 90-120 n. Chr. sowie die archäologischen Funde aus der Region. Nicht zuletzt aufgrund dieser Quellenlage wurde der Betrachtungszeitraum auf die Zeit von Agricola bis Hadrianus begrenzt. Es hat sich gezeigt, daß das Wirtschaftsleben in den römischen Militärlagern im Norden Britanniens dieser Epoche einerseits bürokratische Züge trägt, da Führungspersonen in Militär und Verwaltung im Rahmen redistributiver Strukturen viele Güter beschafften, die an die Soldaten gegen Abzüge vom Sold ausgegeben wurden. Andererseits stand diesem Verfahren eine beeindruckende Dynamik im Marktgeschehen gegenüber, die durch die Erfordernisse der Heeresversorgung und des individuellen Konsums der Soldaten entstand. Zu den Bereichen der Wirtschaftstätigkeit, in denen ein starker Einfluß der Bürokratie herrschte, zählten insbesondere die Versorgung mit den Grundnahrungsmitteln (v. a. Getreide, Bier). Hypothesen über ein militärisches Redistributivsystem für Olivenöl unter der Ägide des praefectus annonae wurden allerdings nicht bestätigt. Die Existenz einer zentralen Behörde für die Heeresversorgung im Reich für die Principatszeit nicht nachgewiesen werden. Es zeigte sich statt dessen eine in der Forschung bisher nicht so deutlich gesehene Verantwortung und Aktivität unterer militärischer Entscheidungsträger vor Ort. Die Märkte an der britannischen Grenze bieten eine sehr viel differenzierteres Bild als man es von Handelsplätzen am äußersten Rande der romanisierten Welt vielleicht erwartet hätte. Vor allem zeichneten sie sich durch ein breites Angebot an Waren aus, die über große Entfernungen heran transportiert worden waren (Wein, Oliven, mediterrane Fischcaucen, Pfeffer, Importkeramik). Im Bereich des Handwerks sind im Norden Britanniens durch archäologische Funde und die Tätigkeitsbezeichnungen von Handwerkern in den Texten aus Vindolanda vielfältige Zeugnisse eines Engagements der Militärs präsent.

From Genetic Algorithms to Efficient Organization

The work described in this thesis began as an inquiry into the nature and use of optimization programs based on "genetic algorithms." That inquiry led, eventually, to three powerful heuristics that are broadly applicable in gradient-ascent programs: First, remember the locations of local maxima and restart the optimization program at a place distant from previously located local maxima. Second, adjust the size of probing steps to suit the local nature of the terrain, shrinking when probes do poorly and growing when probes do well. And third, keep track of the directions of recent successes, so as to probe preferentially in the direction of most rapid ascent. These algorithms lie at the core of a novel optimization program that illustrates the power to be had from deploying them together. The efficacy of this program is demonstrated on several test problems selected from a variety of fields, including De Jong's famous test-problem suite, the traveling salesman problem, the problem of coordinate registration for image guided surgery, the energy minimization problem for determining the shape of organic molecules, and the problem of assessing the structure of sedimentary deposits using seismic data.

Tubular Organization of SnO₂ Nanocrystallites for Improved Lithium Ion Battery Anode Performance

Porous tin oxide nanotubes were obtained by vacuum infiltration of tin oxide nanoparticles into porous aluminum oxide membranes, followed by calcination. The porous tin oxide nanotube arrays so prepared were characterized by FE-SEM, TEM, HRTEM, and XRD. The nanotubes are open-ended, highly ordered with uniform cross-sections, diameters and wall thickness. The tin oxide nanotubes were evaluated as a substitute anode material for the lithium ion batteries. The tin oxide nanotube anode could be charged and discharged repeatedly, retaining a specific capacity of 525 mAh/g after 80 cycles. This capacity is significantly higher than the theoretical capacity of commercial graphite anode (372 mAh/g) and the cyclability is outstanding for a tin based electrode. The cyclability and capacities of the tin oxide nanotubes were also higher than their building blocks of solid tin oxide nanoparticles. A few factors accounting for the good cycling performance and high capacity of tin oxide nanotubes are suggested.

Carpe Diem: Establish an Institutional Repository for Your Organization

An interesting article about repositories.