Correlation based method for phase identification in a three phase LV distribution network

Low voltage distribution networks feature a high degree of load unbalance and the addition of rooftop photovoltaic is driving further unbalances in the network. Single phase consumers are distributed across the phases but even if the consumer distribution was well balanced when the network was constructed changes will occur over time. Distribution transformer losses are increased by unbalanced loadings. The estimation of transformer losses is a necessary part of the routine upgrading and replacement of transformers and the identification of the phase connections of households allows a precise estimation of the phase loadings and total transformer loss. This paper presents a new technique and preliminary test results for a method of automatically identifying the phase of each customer by correlating voltage information from the utility's transformer system with voltage information from customer smart meters. The techniques are novel as they are purely based upon a time series of electrical voltage measurements taken at the household and at the distribution transformer. Experimental results using a combination of electrical power and current of the real smart meter datasets demonstrate the performance of our techniques.

Consumer phase identification in a three phase unbalanced LV distribution network

A new technique is presented for automatically identifying the phase connection of domestic customers. Voltage information from a reference three phase house is correlated with voltage information from other customer electricity meters on the same network to determine the highest probability phase connection. The techniques are purely based upon a time series of electrical voltage measurements taken by the household smart meters and no additional equipment is required. The method is demonstrated using real smart meter datasets to correctly identify the phase connections of 75 consumers on a low voltage distribution feeder.

Expertise in the illustrative context of BPM

As Business Process Management (BPM) is evolving and organisations are becoming more process oriented, the need for Expertise in BPM amongst practitioners has increased. Proactively managing Expertise in BPM is essential to unlock the potential of BPM as a management paradigm and competitive advantage. Whilst great attention is being paid by the BPM community to the technological aspects of BPM, relatively little research or work has been done concerning the expertise aspect of BPM. There is a substantial body of knowledge on expertise itself, however there is no common framework in existence at the time of writing, describing the fundamental attributes characterising Expertise in the illustrative context of BPM. There are direct implications of the understanding and characterisation of Expertise in the context of BPM as a key strategic component and success factor of BPM itself, as well as for those involved in BPM. Expertise in the context of BPM needs to be characterised to understand it, and be able to proactively manage it. Given the relative infancy of research into Expertise in the context of BPM, an exploration of the relevance and importance of Expertise in the context of BPM was considered essential, to ensure the study itself was of value to the BPM field. The aims of this research are firstly to address the two research questions 'why is expertise important and relevant in the context of BPM?', and 'how can Expertise in the context of BPM be characterised?', and secondly, the development of a comprehensive and validated A-priori model characterising Expertise in the illustrative context of BPM. The study is theory-guided. It has been undertaken via an extensive literature review across relevant literature domains, and a revelatory case study utilising several methods: informal discussions, an open-ended survey, and participant observation. An a-priori model was then developed which comprised of several Constructs and Sub-constructs, and several overall aspects of Expertise in BPM. This was followed by the conduct of interviews in the validation phase of the revelatory case study. The primary contributions of this study are to the fields of expertise, BPM and research. Contributions to the field of expertise include a comprehensive review of expertise literature in general and synthesised critique on expertise research, characterisation of expertise in an illustrative context as a system, and a comprehensive narrative of the dynamics and interrelationships of the core attributes characterising expertise. Contributions to the field of BPM include firstly, the establishment of the importance of understanding Expertise in the context of BPM, including a comprehensive overview of the role the relevance and importance of Expertise in the context of BPM, through explanation of the effect of Expertise in BPM. Secondly, a model characterising Expertise in the context of BPM, which can be used by BPM practitioners to clearly articulate and illuminate the state of Expertise in BPM in organisations. Contributions to the field of research include an extended view of Systems Theory developed, reflecting the importance of the system context in systems thinking, and a narrative on ontological innovation through the positioning of ontology as a meta-model of Expertise in the context of BPM.

Influences of molecular structure on co-crystallization of polypyridyl metal complexes.

Heteroleptic complexes of the type \[RuL2L′](PF6)2 (L, L′ = combinations of 1,10-phenanthroline (phen) and 2,2′-bipyridine (bipy)) were found to cocrystallize with \[Ni(phen)3](PF6)2 to produce cocrystals of \[Ni(phen)3]x\[RuL2L′]1–x(PF6)2. In this report we show that the ability of the complexes to cocrystallize is influenced by the number of common ligands between complexes in solution. Supramolecular selection is a phenomenon caused by molecular recognition through which cocrystals can grow from the same solution but contain different ratios of the molecular components. It was found that systems where L = phen displayed less supramolecular selection than systems where L = bipy. With increasing supramolecular selection, the composition of cocrystals was found to vary significantly from the initial relative concentration in the cocrystallizing solution, and therefore it was increasingly difficult to control the final composition of the resultant cocrystals. Consequently, modulation of concentration-dependent properties such as phase was also found to be less predictable with increasing supramolecular selection. Notwithstanding the complication afforded by the presence of supramolecular selection, our results reaffirm the robustness of the \[M(phen)3](PF6)2 structure because it was maintained even when ca. 90% of the complexes in the cocrystals were \[Ru(phen)(bipy)2](PF6)2, which in its pure form is not isomorphous with \[M(phen)3](PF6)2. Experiments between complexes without common ligands, i.e., \[Ru(bipy)3](PF6)2 cocrystallized with \[Ni(phen)3](PF6)2, were found to approach the limit to which molecular recognition processes can be confused into cocrystallizing different molecules to form single cocrystals. For these systems the result was the formation of block-shaped crystals skewered by a needle-shaped crystals.

Search-phase echolocation calls of the New Zealand lesser short-tailed bat (Mystacina tuberculata) and long-tailed bat (Chalinolobus tuberculatus).

This paper describes the search-phase echolocation calls of lesser short-tailed bats (Mystacina tuberculata) and long-tailed bats (Chalinolobus tuberculatus). Calls were recorded from all three subspecies of short-tailed bat and seven populations of long-tailed bat, three in Northland, two in the central North Island, and two in the lower South Island. The calls were recorded in the field and digitised, then three spectral components and one temporal component of the calls were measured. Calls of the lesser short-tailed bat could be loosely classified into subspecies by means of multivariate discriminant function analysis. Similarly, long-tailed bat calls showed regional variation, and discriminant function analysis was able to fit calls to regional groups with a high rate of success. The significance of the results presented is discussed in terms of the conservation of New Zealand bats and the unique ecology of the lesser short-tailed bat.

Mortality attributable to smoking in Vietnamese men in 2008

Objective Smoking prevalence among Vietnamese men is among the highest in the world. Our aim was to provide estimates of tobacco attributable mortality to support tobacco control policies. Method We used the Peto–Lopez method using lung cancer mortality to derive a Smoking Impact Ratio (SIR) as a marker of cumulative exposure to smoking. SIRs were applied to relative risks from the Cancer Prevention Study, Phase II. Prevalence-based and hybrid methods, using the SIR for cancers and chronic obstructive pulmonary disease and smoking prevalence for all other outcomes, were used in sensitivity analyses. Results When lung cancer was used to measure cumulative smoking exposure, 28% (95% uncertainty interval 24–31%) of all adult male deaths (> 35 years) in Vietnam in 2008 were attributable to smoking. Lower estimates resulted from prevalence-based methods [24% (95% uncertainty interval 21–26%)] with the hybrid method yielding intermediate estimates [26% (95% uncertainty interval 23–28%)]. Conclusion Despite uncertainty in these estimates of attributable mortality, tobacco smoking is already a major risk factor for death in Vietnamese men. Given the high current prevalence of smoking, this has important implications not only for preventing the uptake of tobacco but also for immediate action to adopt and enforce stronger tobacco control measures.

The entrepreneurial break-up : disengaging from the start-up phase

Research on firm exit has grown considerably in volume and sophistication in recent years, leading to new insights and strengthened research-based evidence. However, no framework explicitly explains nascent disengagement, i.e., termination of start-up efforts before the firm has reached an operational stage. Further, prior research has had limited success at explaining nascent entrepreneurial behaviour using theories based on logics of resource availability and economic rationality. In response, this chapter approaches nascent stage disengagement unconventionally by proposing to analogously apply Sternberg’s (1986) Triangular Theory of Love, arguing that founders are less likely to give up the start-up effort if they create strong, almost loving relations to their businesses. Nascent entrepreneurs who terminate the start-up process are proposed to lack one or more of the components – intimacy, passion, and commitment – which are essential according to Sternberg’s theory.

Patterns of service use among persons with Schizophrenia and other psychotic disorders

Objective: This study assessed 12-month service use patterns among people with psychotic disorders and sought to identify determinants of service use. Methods: As part of a large two-phase Australian study of psychotic disorders, structured interviews were conducted with a stratified random sample of adults who screened positive for psychosis. Demographic characteristics, social functioning, symptoms, mental health diagnoses, and use of psychiatric and nonpsychiatric services were assessed. Data were analyzed for 858 persons who had an ICD-10 diagnosis of a psychotic disorder and who had been hospitalized for less than six months during the previous year. Results: People with psychotic disorders had high levels of use of health services, both in absolute terms and relative to people with nonpsychotic disorders. Those with psychotic disorders were estimated to have an average of one contact with health services per week. Use of psychiatric inpatient services was associated with parenthood, higher symptom levels, recent attempts at suicide or self-harm, personal disability, medication status, and frequency of alcohol consumption. Services provided by general practitioners (family physicians) were more likely to be obtained by older people, women, people with greater availability of friends, those with fewer negative symptoms, and those whose service needs were unmet by other sources. People who were high users of health services also reported having more contact with a range of non-health agencies. Conclusions: The predictors of service use accounted for small proportions of the variance in overall use of health services. The role of general practitioners in providing and monitoring treatment programs and other psychosocial interventions needs to be acknowledged and enhanced.

Rapid production of a plasmid DNA encoding a malaria vaccine candidate via amino-functionalized poly(GMA-co-EDMA) monolith

Malaria is a global health problem; an effective vaccine is urgently needed. Due to the relative poverty and lack of infrastructure in malaria endemic areas, DNA-based vaccines that are stable at ambient temperatures and easy to formulate have great potential. While attention has been focused mainly on antigen selection, vector design and efficacy assessment, the development of a rapid and commercially viable process to manufacture DNA is generally overlooked. We report here a continuous purification technique employing an optimized stationary adsorbent to allow high-vaccine recovery, low-processing time, and, hence, high-productivity. A 40.0 mL monolithic stationary phase was synthesized and functionalized with amino groups from 2-Chloro-N,N- diethylethylamine hydrochloride for anion-exchange isolation of a plasmid DNA (pDNA) that encodes a malaria vaccine candidate, VR1020-PyMSP4/5. Physical characterization of the monolithic polymer showed a macroporous material with a modal pore diameter of 750 nm. The final vaccine product isolated after 3 min elution was homogeneous supercoiled plasmid with gDNA, RNA and protein levels in keeping with clinical regulatory standards. Toxicological studies of the pVR1020-PyMSP4/5 showed a minimum endotoxin level of 0.28 EU/m.g pDNA. This cost-effective technique is cGMP compatible and highly scalable for the production of DNA-based vaccines in commercial quantities, when such vaccines prove to be effective against malaria. © 2008 American Institute of Chemical Engineers.

The suitability of DEAE-Cl active groups on customized poly(GMA-co-EDMA) continuous stationary phase for fast enzyme-free isolation of plasmid DNA

The creation of a commercially viable and a large-scale purification process for plasmid DNA (pDNA) production requires a whole-systems continuous or semi-continuous purification strategy employing optimised stationary adsorption phase(s) without the use of expensive and toxic chemicals, avian/bovine-derived enzymes and several built-in unit processes, thus affecting overall plasmid recovery, processing time and economics. Continuous stationary phases are known to offer fast separation due to their large pore diameter making large molecule pDNA easily accessible with limited mass transfer resistance even at high flow rates. A monolithic stationary sorbent was synthesised via free radical liquid porogenic polymerisation of ethylene glycol dimethacrylate (EDMA) and glycidyl methacrylate (GMA) with surface and pore characteristics tailored specifically for plasmid binding, retention and elution. The polymer was functionalised with an amine active group for anion-exchange purification of pDNA from cleared lysate obtained from E. coli DH5α-pUC19 pellets in RNase/protease-free process. Characterization of the resin showed a unique porous material with 70% of the pores sizes above 300 nm. The final product isolated from anion-exchange purification in only 5 min was pure and homogenous supercoiled pDNA with no gDNA, RNA and protein contamination as confirmed with DNA electrophoresis, restriction analysis and SDS page. The resin showed a maximum binding capacity of 15.2 mg/mL and this capacity persisted after several applications of the resin. This technique is cGMP compatible and commercially viable for rapid isolation of pDNA.

Towards the design of a scalable and commercially viable technique for plasmid purification using a methacrylate monolithic stationary phase

A monolithic stationary phase was prepared via free radical co-polymerization of ethylene glycol dimethacrylate (EDMA) and glycidyl methacrylate (GMA) with pore diameter tailored specifically for plasmid binding, retention and elution. The polymer was functionalized. with 2-chloro-N,N-diethylethylamine hydrochloride (DEAE-Cl) for anion-exchange purification of plasmid DNA (pDNA) from clarified lysate obtained from E. coli DH5α-pUC19 culture in a ribonuclease/ protease-free environment. Characterization of the monolithic resin showed a porous material, with 68% of the pores existing in the matrix having diameters above 300 nm. The final product isolated from a single-stage 5 min anion-exchange purification was a pure and homogeneous supercoiled (SC) pDNA with no gDNA, RNA and protein contamination as confirmed by ethidium bromide agarose gel electrophoresis (EtBr-AGE), enzyme restriction analysis and sodium dodecyl sulfate-polyacrylamide gel electrophoresis. This non-toxic technique is cGMP compatible and highly scalable for production of pDNA on a commercial level.