Sistema para cambiar la geometría de un motor

En este proyecto se desarrolla un sistema electrónico para variar la geometría de un motor de un monoplaza que participa en la competición Fórmula SAE. Fórmula SAE es una competición de diseño de monoplazas para estudiantes, organizado por “Society of Automotive Enginners” (SAE). Este concurso busca la innovación tecnológica de la automoción, así como que estudiantes participen en un trabajo real, en el cual el objetivo es obtener resultados competitivos cumpliendo con una serie de requisitos. La variación de la geometría de un motor en un vehículo permite mejorar el rendimiento del monoplaza consiguiendo elevar el par de potencia del motor. Cualquier mejora en del vehículo en un ámbito de competición puede resultar determinante en el desenlace de la misma. El objetivo del proyecto es realizar esta variación mediante el control de la longitud de los tubos de admisión de aire o “runners” del motor de combustión, empleando un motor lineal paso a paso. A partir de la información obtenida por sensores de revoluciones del motor de combustión y la posición del acelerador se debe controlar la distancia de dichos tubos. Integrando este sistema en el bus CAN del vehículo para que comparta la información medida al resto de módulos. Por todo esto se realiza un estudio aclarando los aspectos generales del objetivo del trabajo, para la comprensión del proyecto a realizar, las posibilidades de realización y adquisición de conocimientos para un mejor desarrollo. Se presenta una solución basada en el control del motor lineal paso a paso mediante el microcontrolador PIC32MX795F512-L. Dispositivo del fabricante Microchip con una arquitectura de 32 bits. Este dispone de un módulo CAN integrado y distintos periféricos que se emplean en la medición de los sensores y actuación sobre el motor paso a paso empleando el driver de Texas Instruments DRV8805. Entonces el trabajo se realiza en dos líneas, una parte software de programación del control del sistema, empleando el software de Microchip MPLABX IDE y otra parte hardware de diseño de una PCB y circuitos acondicionadores para la conexión del microcontrolador, con los sensores, driver, motor paso a paso y bus CAN. El software empleado para la realización de la PCB es Orcad9.2/Layout. Para la evaluación de las medidas obtenidas por los sensores y la comprobación del bus CAN se emplea el kit de desarrollo de Microchip, MCP2515 CAN Bus Monitor Demo Board, que permite ver la información en el bus CAN e introducir tramas al mismo. ABSTRACT. This project develops an electronic system to vary the geometry of a car engine which runs the Formula SAE competition. Formula SAE is a design car competition for students, organized by "Society of Automotive Engineers" (SAE). This competition seeks technological innovation in the automotive industry and brings in students to participate in a real job, in which the objective is to obtain competitive results in compliance with certain requirements. Varying engine’s geometry in a vehicle improves car’s performance raising engine output torque. Any improvement in the vehicle in a competition field can be decisive in the outcome of it. The goal of the project is the variation by controlling the length of the air intake pipe or "runners" in a combustion engine, using a linear motor step. For these, uses the information gathered by speed sensors from the combustion engine and by the throttle position to control the distance of these tubes. This system is integrated in the vehicle CAN bus to share the information with the other modules. For all this is made a study to clarify the general aspects of the project in order to understand the activities developed inside the project, the different options available and also, to acquire knowledge for a better development of the project. The solution is based on linear stepper motor control by the microcontroller PIC32MX795F512-L. Device from manufacturer Microchip with a 32-bit architecture. This module has an integrated CAN various peripherals that are used in measuring the performance of the sensors and drives the stepper motor using Texas Instruments DRV8805 driver. Then the work is done in two lines, first, control programming software system using software MPLABX Microchip IDE and, second, hardware design of a PCB and conditioning circuits for connecting the microcontroller, with sensors, driver stepper motor and CAN bus. The software used to carry out the PCB is Orcad9.2/Layout. For the evaluation of the measurements obtained by the sensors and CAN bus checking is used Microchip development kit, MCP2515 CAN Bus Monitor Demo Board, that allows you to see the information on the CAN bus and enter new frames in the bus.

Contribution to proactivity in mobile context-aware recommender systems

Los sistemas de recomendación son potentes herramientas de filtrado de información que permiten a usuarios solicitar sugerencias sobre ítems que cubran sus necesidades. Tradicionalmente estas recomendaciones han estado basadas en opiniones de los mismos, así como en datos obtenidos de su consumo histórico o comportamiento en el propio sistema. Sin embargo, debido a la gran penetración y uso de los dispositivos móviles en nuestra sociedad, han surgido nuevas oportunidades en el campo de los sistemas de recomendación móviles gracias a la información contextual que se puede obtener sobre la localización o actividad de los usuarios. Debido a este estilo de vida en el que todo tiende a la movilidad y donde los usuarios están plenamente interconectados, la información contextual no sólo es física, sino que también adquiere una dimensión social. Todo esto ha dado lugar a una nueva área de investigación relacionada con los Sistemas de Recomendación Basados en Contexto (CARS) móviles donde se busca incrementar el nivel de personalización de las recomendaciones al usar dicha información. Por otro lado, este nuevo escenario en el que los usuarios llevan en todo momento un terminal móvil consigo abre la puerta a nuevas formas de recomendar. Sustituir el tradicional patrón de uso basado en petición-respuesta para evolucionar hacia un sistema proactivo es ahora posible. Estos sistemas deben identificar el momento más adecuado para generar una recomendación sin una petición explícita del usuario, siendo para ello necesario analizar su contexto. Esta tesis doctoral propone un conjunto de modelos, algoritmos y métodos orientados a incorporar proactividad en CARS móviles, a la vez que se estudia el impacto que este tipo de recomendaciones tienen en la experiencia de usuario con el fin de extraer importantes conclusiones sobre "qué", "cuándo" y "cómo" se debe notificar proactivamente. Con este propósito, se comienza planteando una arquitectura general para construir CARS móviles en escenarios sociales. Adicionalmente, se propone una nueva forma de representar el proceso de recomendación a través de una interfaz REST, lo que permite crear una arquitectura independiente de dispositivo y plataforma. Los detalles de su implementación tras su puesta en marcha en el entorno bancario español permiten asimismo validar el sistema construido. Tras esto se presenta un novedoso modelo para incorporar proactividad en CARS móviles. Éste muestra las ideas principales que permiten analizar una situación para decidir cuándo es apropiada una recomendación proactiva. Para ello se presentan algoritmos que establecen relaciones entre lo propicia que es una situación y cómo esto influye en los elementos a recomendar. Asimismo, para demostrar la viabilidad de este modelo se describe su aplicación a un escenario de recomendación para herramientas de creación de contenidos educativos. Siguiendo el modelo anterior, se presenta el diseño e implementación de nuevos interfaces móviles de usuario para recomendaciones proactivas, así como los resultados de su evaluación entre usuarios, lo que aportó importantes conclusiones para identificar cuáles son los factores más relevantes a considerar en el diseño de sistemas proactivos. A raíz de los resultados anteriores, el último punto de esta tesis presenta una metodología para calcular cuán apropiada es una situación de cara a recomendar de manera proactiva siguiendo el modelo propuesto. Como conclusión, se describe la validación llevada a cabo tras la aplicación de la arquitectura, modelo de recomendación y métodos descritos en este trabajo en una red social de aprendizaje europea. Finalmente, esta tesis discute las conclusiones obtenidas a lo largo de la extensa investigación llevada a cabo, y que ha propiciado la consecución de una buena base teórica y práctica para la creación de sistemas de recomendación móviles proactivos basados en información contextual. ABSTRACT Recommender systems are powerful information filtering tools which offer users personalized suggestions about items whose aim is to satisfy their needs. Traditionally the information used to make recommendations has been based on users’ ratings or data on the item’s consumption history and transactions carried out in the system. However, due to the remarkable growth in mobile devices in our society, new opportunities have arisen to improve these systems by implementing them in ubiquitous environments which provide rich context-awareness information on their location or current activity. Because of this current all-mobile lifestyle, users are socially connected permanently, which allows their context to be enhanced not only with physical information, but also with a social dimension. As a result of these novel contextual data sources, the advent of mobile Context-Aware Recommender Systems (CARS) as a research area has appeared to improve the level of personalization in recommendation. On the other hand, this new scenario in which users have their mobile devices with them all the time offers the possibility of looking into new ways of making recommendations. Evolving the traditional user request-response pattern to a proactive approach is now possible as a result of this rich contextual scenario. Thus, the key idea is that recommendations are made to the user when the current situation is appropriate, attending to the available contextual information without an explicit user request being necessary. This dissertation proposes a set of models, algorithms and methods to incorporate proactivity into mobile CARS, while the impact of proactivity is studied in terms of user experience to extract significant outcomes as to "what", "when" and "how" proactive recommendations have to be notified to users. To this end, the development of this dissertation starts from the proposal of a general architecture for building mobile CARS in scenarios with rich social data along with a new way of managing a recommendation process through a REST interface to make this architecture multi-device and cross-platform compatible. Details as regards its implementation and evaluation in a Spanish banking scenario are provided to validate its usefulness and user acceptance. After that, a novel model is presented for proactivity in mobile CARS which shows the key ideas related to decide when a situation warrants a proactive recommendation by establishing algorithms that represent the relationship between the appropriateness of a situation and the suitability of the candidate items to be recommended. A validation of these ideas in the area of e-learning authoring tools is also presented. Following the previous model, this dissertation presents the design and implementation of new mobile user interfaces for proactive notifications. The results of an evaluation among users testing these novel interfaces is also shown to study the impact of proactivity in the user experience of mobile CARS, while significant factors associated to proactivity are also identified. The last stage of this dissertation merges the previous outcomes to design a new methodology to calculate the appropriateness of a situation so as to incorporate proactivity into mobile CARS. Additionally, this work provides details about its validation in a European e-learning social network in which the whole architecture and proactive recommendation model together with its methods have been implemented. Finally, this dissertation opens up a discussion about the conclusions obtained throughout this research, resulting in useful information from the different design and implementation stages of proactive mobile CARS.

Sistema de telemetría para un vehículo de fórmula S.A.E.

En este proyecto, se ha desarrollado una aplicación electrónica para un coche de competición, en concreto para la fórmula SAE (Society of Automotive Engineers), una competición universitaria en la que cada equipo, formado por estudiantes, debe diseñar, construir y probar un prototipo basándose en una serie de reglas. El objetivo final de la competición es proporcionar a los estudiantes el conocimiento práctico necesario para su futura labor profesional, del cual se pensaba que los estudiantes adolecían al acabar sus estudios universitarios cuando se creó esta competición. La aplicación desarrollada en este proyecto consiste en un sistema de telemetría, utilizado para transmitir los datos proporcionados por los sensores del vehículo a través de un sistema de radiofrecuencia, de manera que se pueda estudiar el comportamiento del coche durante los ensayos a la vez que el coche está rodando y así no depender de un sistema de adquisición de datos del que había que descargarse la información una vez finalizada la sesión de ensayo, como había que hacer hasta el momento. Para la implementación del proyecto, se ha utilizado un kit de desarrollo (Xbee Pro 868) que incluye dos módulos de radio, dos placas de desarrollo, dos cables USB y una antena, el cual ha permitido desarrollar la parte de radio del proyecto. Para transmitir los datos proporcionados por la centralita del vehículo, la cual recoge la información de todos los sensores presentes en el vehículo, se han desarrollado dos placas de circuito impreso. La primera de ellas tiene como elemento principal un microprocesador PIC de la marca Microchip (PIC24HJ64GP502), que recoge los datos proporcionados por la centralita del vehículo a través de su bus CAN de comunicaciones. La segunda placa de circuito impreso tiene como elemento fundamental el transmisor de radio. Dicho transmisor está conectado al microprocesador de la otra placa a través de línea serie. Como receptor de radio se ha utilizado una de las placas de prueba que integraba el kit de desarrollo Xbee Pro 868, la cual recoge los datos que han sido enviados vía radio y los manda a su vez a través de USB a un ordenador donde son monitorizados. Hasta aquí la parte hardware del sistema. En cuanto a la parte software, ha habido que desarrollar una aplicación en lenguaje C, que ejecuta el microprocesador PIC, que se encarga de recoger los datos enviados por la centralita a través del bus CAN (Controller Area Network) y transmitirlos a través de línea serie al chip de radio. Por último, para la monitorización de los datos se han desarrollado dos aplicaciones en LabVIEW, una que recoge los datos a través de USB, los muestra en pantalla y los guarda en un fichero y otra que lee los datos del fichero y los representa gráficamente para permitir un estudio más detallado del comportamiento del vehículo. ABSTRACT In this project, an electronic application has been developed for a race car – Formula SAE car-. Formula SAE is a university championship in which each team, made up of students, should design, construct and test a prototype within certain rules. The final goal of the competition is to enhance the practical knowledge of the students, which was thougth to be poor at the time the competition was created. The application developed in this project consists of a telemetry system, employed to transmit the data provided by the car’s sensors through a radio frequency system, so that it could be possible to study the behaviour of the vehicle during tests and do not depend on a datalogger system as it occurred until now. To carry out the radio module of the project, a Xbee Pro 868 development kit has been used, which includes two radio modules, two development boards, two USB cables and an antenna. To transmit the data provided by the ECU (Engine Control Unit) of the vehicle, which receives information from all the sensors the vehicle has, two printed circuit boards have been built. One of them has a PIC microprocessor of Microchip (PIC24HJ64GP502) which receives the data coming from CAN bus of the ECU. Tha main element of the other printed circuit board is the radio transmitter. This chip receives the data from the microprocessor through its serial line. The development board of the Xbee Pro 868 has been used as receiver. When data arrives to the receiver, it transmits them to a computer through USB where the data are displayed. All this composes the hardware of the system. Regarding the software, a C coded application has been developed. This application is executed by the microprocessor and its function is to receive the data from the bus CAN (Controller Area Network) and send them to the radio transmitter through the microprocessor’s serial line. To show the data on the computer, two LabVIEW applications has been developed. The first one receives the data through the USB port, displays them on the screen and save them to a file and the second one reads the data from the file while represents them graphically to allow studying the behaviour of the car on track.

Energy consumption and intensity of toll highway transport in Spain

We estimate the energy consumption of toll highway transport on a number of Spanish roads. Regression parameters are balanced according to coefficients from an empirical analysis based on survey data by vehicle type. The mean energy consumption and subsequent CO2 emissions on the toll highway sections are estimated as 1895 MJ/h/lane-km and 0.15 tCO2 eq./h/lane-km, values that increase to 2644 and 0.22 when energy and carbon emissions of transport infrastructure are considered based on the life cycle energy consumption for toll highway construction and use. If the energy intensity of infrastructure construction is allocated to the users according to traffic, it is much higher for motorcycles than for cars, and is significantly lower for articulated trucks than for vans.

Management of urban mobility to control climate change in cities in Spain

The need to decarbonize urban mobility is one of the main motivations for all countries to achieve reduction targets for greenhouse gas (GHG) emissions. In general, the transport modes that have experienced the most growth in recent years tend to be the most polluting. Most efforts have focused on improvements in vehicle efficiency and on the renewal of vehicle fleets; more emphasis should be placed on strategies related to the management of urban mobility and modal share. Research of individual travel that analyzes carbon dioxide (CO2) emissions and car and public transport share in daily mobility will enable better assessments of the potential of urban mobility measures introduced to limit GHG emissions produced by transport in cities. The climate change impacts of daily mobility in Spain are explored with data from two national travel surveys in 2000 and 2006, and a method for estimating the CO2 emissions associated with each journey and each surveyed individual is provided. The results demonstrate that from 2000 to 2006, daily mobility has increased and has led to a 17% increase in CO2 emissions. When these results are separated by transport mode, cars prove to be the main contributor to that increase, followed by public transport. More focus should be directed toward modal shift strategies, which take into account not only the number of journeys but also the distance traveled. These contributions have potential applications in the assessment of current and future urban transport policies related to low-carbon urban transportation.

Quality of bus services performance: benefits of real time passenger information systems

One of the main problems in urban areas is the steady growth in car ownership and traffic levels. Therefore, the challenge of sustainability is focused on a shift of the demand for mobility from cars to collective means of transport. For this purpose, buses are a key element of the public transport systems. In this respect Real Time Passenger Information (RTPI) systems help people change their travel behaviour towards more sustainable transport modes. This paper provides an assessment methodology which evaluates how RTPI systems improve the quality of bus services performance in two European cities, Madrid and Bremerhaven. In the case of Madrid, bus punctuality has increased by 3%. Regarding the travellers perception, Madrid raised its quality of service by 6% while Bremerhaven increased by 13%. On the other hand, the users¿ perception of Public Transport (PT) image increased by 14%.

Variable Speed Limits. Review and development of an aggregate indicator based on floating car data.

Changing factors (mainly traffic intensity and weather conditions) affecting road conditions require a suitable optimal speed at any time. To solve this problem, variable speed limit systems (VSL) ? as opposed to fixed limits ? have been developed in recent decades. This term has included a number of speed management systems, most notably dynamic speed limits (DSL). In order to avoid the indiscriminate use of both terms in the literature, this paper proposes a simple classification and offers a review of some experiences, how their effects are evaluated and their results This study also presents a key indicator, which measures the speed homogeneity and a methodology to obtain the data based on floating cars and GPS technology applying it to a case study on a section of the M30 urban motorway in Madrid (Spain).

Does high speed rail compete fairly with other transportation modes? Madrid-Barcelona case study

Transportation modes produce many external costs such as congestion, accidents, and environmental impacts (pollution, noise and so on). From the microeconomic theory it is well known that in order to maximize social welfare, transportation modes should internalize the marginal costs they produce. Allocative efficiency is achieved when all transportation modes are priced at their social marginal cost. The objective of this research is to evaluate to what extent different passenger transport modes internalize their social marginal costs. This analysis is important since it affects the competitiveness of the different transport modes for a given OD pair. The case study analyzed is the corridor Madrid-Barcelona in Spain and the different transport modes have been considered (cars, buses, high-speed train and air). The research calculates the marginal social cost per user for each transportation mode, and it compares it with the average fare—allowing for the effect of discriminatory taxes—currently paid by the users. The external costs are calculated according to the guidelines established by the European Union. The gap between the marginal social cost and the price paid by users will provide the extra cost per passenger that each transport mode should have to pay for internalizing the external cost it produces. The research shows that external costs already produced by road and air transport modes are much higher than those produced by rail. However, the results show that road transport already internalizes every external costs it produces because users pay high fuel taxes. In other words, although rail transportation produces lower external costs, road transportation pays more than it should on the basis of the social marginal costs. The results of this work might be of help for Europ ean policy actions to be undertaken in the future.

Homogeneization effects of variable speed limits.

Changing factors (mainly traffic intensity and weather conditions) affecting road conditions require a suitable optimal speed at any time. To solve this problem, variable speed limit systems (VSL) - as opposed to fixed limits - have been developed in recent decades. This term has included a number of speed management systems, most notably dynamic speed limits (DSL). In order to avoid the indiscriminate use of both terms in the literature, this paper proposes a simple classification and offers a review of some experiences, how their effects are evaluated and their results. This study also presents a key indicator which measures the speed homogeneity and a methodology to obtain the data based on floating cars and GPS technology applying it to a case study on a section of the M30 urban motorway in Madrid (Spain). It also presents the relation between this indicator and road performance and emissions values.

Modelo gráfico para la datación de vías romanas empedradas a partir del estudio de sus estados de frecuentación y del análisis superficial de roderas

La presente tesis doctoral se orienta al estudio y análisis de los caminos empedrados antiguos, desde la época prerromana, tanto desde el punto de vista histórico como desde el técnico. La cuantificación de la romanidad de un camino representa un objetivo importante para la mayoría de los estudiosos de la caminería antigua, así como para los arqueólogos, por los datos que ofrece acerca del uso del territorio, los trazados de caminos en la antigüedad y los tráficos asociados. Cuantificar la romanidad de un camino no es tarea sencilla debido a que intervienen multitud de condicionantes que están vivos y son cambiantes como consecuencia del dinamismo inherente al propio camino. En cuanto al aspecto histórico, se realiza una descripción y análisis de la evolución del camino en la Península Ibérica desde sus orígenes hasta mediados del siglo XX, que permite diferenciar la red itineraria según su momento histórico. Así mismo, se describen y analizan: las ruedas y los carros desde sus orígenes, especialmente en la época romana -incluyendo una toma de medidas de distintos tipos de carro, existentes en instituciones y colecciones particulares-; las técnicas de transporte en la antigüedad y las características de la infraestructura viaria de época romana, detallando aspectos generales de sus técnicas de ingeniería y construcción. Desde el punto de vista técnico, el enfoque metodológico ha sido definir un Índice de Romanidad del Camino (IRC) para la datación de vías romanas empedradas, basado en un análisis multicriterio, a partir de los distintos factores que caracterizan su romanidad. Se ha realizado un exhaustivo estudio de campo, con la correspondiente toma de datos en las vías. Se han realizado una serie de ensayos de laboratorio con un prototipo creado exprofeso para simular el desgaste de la piedra producido por el traqueteo del carro al circular por el camino empedrado y dar una hipótesis de datación del camino. Se ha realizado un tratamiento estadístico con la muestra de datos medidos en campo. Se ha definido además el concepto de elasticidad de rodera usando la noción de derivada elástica. En cuanto a los resultados obtenidos: se ha calculado el Índice de Romanidad del Camino (IRC) en una serie de vías empedradas, para cuantificar su romanidad, obteniéndose un resultado coherente con la hipótesis previa sobre la datación de dichas vías; y se ha formulado un modelo exponencial para el número de frecuentaciones de carga que lo relaciona con la elasticidad de rodera y con su esbeltez y que se ha utilizado para relacionar la elasticidad de la rodera con la geología de la roca. Se ha iniciado una línea de investigación sobre la estimación de tráficos históricos en la caminería antigua, considerando que el volumen de tráfico a lo largo del tiempo en un tramo de vía está relacionado con los valores de elasticidad de rodera de dicho tramo a través de la tipología de la roca. En resumen, la presente tesis doctoral proporciona un método para sistematizar el estudio de los caminos antiguos, así como para datarlos y estimar la evolución de sus tráficos. The present Ph. D. Thesis aims to study and to analyze ancient cobbled ways, since pre-roman times, both from the historical and technical points of view. The quantification of the Roman character of a way represents an important target for most of the researchers of ancient ways, as well as for the archaeologists, due to information that it offers about the use of the territory, the tracings of ways in the antiquity and the associate flows. To quantify the Roman character of a way is not a simple task because it involves multitude of influent factors that are alive and variable as a result of the dynamism inherent to the way. As for the historical aspect, a description and analysis of the evolution of the way in the Iberian Peninsula from its origins until the middle of the twentieth century has been done. This allows us to distinguish between elements of the network according to its historical moment. Likewise, a description and analysis is given about: the wheels and the cars since their origins, especially in the Roman time - including a capture of measurements of different types of car, belonging to institutions and to particular collections-; the transport techniques on the antiquity and the characteristics of the road infrastructure of Roman epoch, detailing general technical engineering and constructive aspects. From the technical point of view, the methodological approach has been to define an Index of the Roman Character of the Way (IRC) for the dating of cobbled Roman routes, based on a multi-criterion analysis, involving different factors typical of Roman ways. An exhaustive field study has been realized, with the corresponding capture of information in the routes. A series of laboratory essays has been realized with an ad hoc prototype created to simulate the wear of the stone produced by cars circulating along the cobbled way, and to give a dating hypothesis of the way. A statistical treatment has been realized with the sample of information measured in field. There has been defined also the concept of elasticity of rolling trace using the notion of elastic derivative. As for the obtained results: there has been calculated the Index of Roman Character of the Way (IRC) in a series of cobbled routes, to quantify its Roman character, obtaining a coherent result with the previous dating hypothesis of the above mentioned routes; and an exponential model has been formulated for the number of frequent attendances of load that relates this number to the elasticity of rolling trace and to its slenderness and that has been used to relate the elasticity of the rolling trace to the geology of the rock. An investigation line has been opened about the estimation of historical flows in ancient ways, considering that the traffic volume over the course of time in a route stretch is related to the values of elasticity of rolling trace of the above mentioned stretch by means of the typology of the rock. In short, the present Ph. D. Thesis provides a method to systematize the study of ancient ways, as well as to date them and to estimate the evolution of their flows.

Categorization of Anti-Patterns in Software Project Management

In the last decades, software systems have become an intrinsic element in our daily lives. Software exists in our computers, in our cars, and even in our refrigerators. Today’s world has become heavily dependent on software and yet, we still struggle to deliver quality software products, on-time and within budget. When searching for the causes of such alarming scenario, we find concurrent voices pointing to the role of the project manager. But what is project management and what makes it so challenging? Part of the answer to this question requires a deeper analysis of why software project managers have been largely ineffective. Answering this question might assist current and future software project managers in avoiding, or at least effectively mitigating, problematic scenarios that, if unresolved, will eventually lead to additional failures. This is where anti-patterns come into play and where they can be a useful tool in identifying and addressing software project management failure. Unfortunately, anti-patterns are still a fairly recent concept, and thus, available information is still scarce and loosely organized. This thesis will attempt to help remedy this scenario. The objective of this work is to help organize existing, documented software project management anti-patterns by answering our two research questions: · What are the different anti-patterns in software project management? · How can these anti-patterns be categorized?

Con motivo de haver embiado al Señor Abate D. Manuel Lassala, autor de la Ifigenia en Aulide, en idioma italiano, unos exemplares de la traduccion castellana

Contiene: Romance ; A la conquista de Menorca por las Armas Catholicas : Oda ; Al denuedo y constancia con que peleó el Navio Santo Domingo el dia 16 de Enero de 1780 : Oda

Sermones que en las solemnes fiestas de la translacion del Smo. Sacramento, y milagrosa imagen de N. Sra. de las Mercedes al nuevo Templo del Real ... [Texto impreso]

Sign. : [ ]6, B-L4

Development of the infrastructure for a multi-agent traffic management system simulation

This document contains detailed description of the design and the implementation of a multi-agent application controlling traffic lights in a city together with a system for simulating traffic and testing. The goal of this thesis is to design and build a simplified intelligent and distributed solution to the problem with the traffic in the big cities following different good practices in order to allow future refining of the model of the real world. The problem of the traffic in the big cities is still a problem that cannot be solved. Not only is the increasing number of cars a reason for the traffic jams, but also the way the traffic is organized. Usually, the intersections with traffic lights are replaced by roundabouts or interchanges to increase the number of cars that can cross the intersection in certain time. But still there are places where the infrastructure cannot be changed and the traffic light semaphores are the only way to control the car flows. In real life, the traffic lights have a predefined plan for change or they receive information from a centralized system when and how they have to change. But what if the traffic lights can cooperate and decide on their own when and how to change? Using this problem, the purpose of the thesis is to explore different agent-based software engineering approaches to design and build a non-conventional distributed system. From the software engineering point of view, the goal of the thesis is to apply the knowledge and use the skills, acquired during the various courses of the master program in Software Engineering, while solving a practical and complex problem such as the traffic in the cities.

Modelización del efecto de la pendiente de la vía sobre el consumo de vehículos turismo

El presente trabajo tiene por objetivo generar una metodología validada que permita predecir el consumo de vehículos turismo circulando en cualquier tramo de vía a partir del perfil orográfico y del diagrama velocidad-tiempo. Para la generación de la metodología, se ha realizado un modelo de simulación con el programa ADVISOR que permite calcular el consumo de combustible para un determinado recorrido en el que se tiene en cuenta el perfil orográfico. Este modelo fue validado con datos reales medidos con equipos on-board y se usó para calcular el consumo de combustible diferencial debido al efecto de la pendiente de la vía, al poderse simular con y sin pendiente. Se realizaron múltiples simulaciones de recorridos con velocidad máxima variable con el fin de obtener un número significativo de datos. Con los resultados de las diferentes simulaciones, se realizó un estudio estadístico, para determinar las variables influyentes y se generó una función estadística (Ecuación de Consumo Estimado – ECE) que permite calcular el consumo de combustible debido a la pendiente de la vía, conociendo el consumo del vehículo en carretera llana (sin pendiente). Esta función estadística generada (ECE), se validó con datos reales medidos en tráfico real. Con el fin de darle generalidad y aplicabilidad a la función generada, y teniendo en cuenta que el consumo de combustible en carretera llana no está siempre disponible, se ha calculado el consumo de combustible sin pendiente utilizando la metodología Copert 4, metodología oficial desarrollada por la Agencia de Medio Ambiente de Europa (EEA) para la estimación de emisiones y consumo de combustible que está basada en datos experimentales pero que no tiene en cuenta la pendiente de la vía. La Ecuación de Consumo Estimado (ECE) aplicada a los consumos calculados por la metodología Copert 4, se valida también usando datos reales medidos en tráfico real y se comprueba que esta función se ajusta considerablemente bien a la realidad, con un error en el consumo acumulado frente al del ensayo real de un 1% y una correlación con el consumo instantáneo del ensayo real de 0,93. Se concluye, que la Función de Consumo Estimado (ECE), permite predecir el efecto de la pendiente sobre el consumo de combustible de un vehículo turismo en tráfico real con un error menor del 1%. Abstract This projects aims to develop a validated methodology that enables to predict cars consumption while circulating at any kind of road section based on its orographic outline and the speed-time diagram. In order to develop this methodology, a simulation model has been performed with the programme ADVISOR, that allows fuel consumption calculation for an specific route in which the orographic outline is considered. This model was validated by real data measured with an on-board equipment and it was used to calculate the differential fuel consumption caused by the effect of the slope on the road, as it was possible to simulate with or without slope. Many simulations were run with routes with variable maximum speed, aiming to obtain a significant amount of data. An statistical study was carried out with the results of those simulations with the purpose to determine the influential variables and an statistical function ( Estimated Consumption Equation – ECE) that enables fuel consumption calculation due to the road’s slope when the consumption of a vehicle on horizontal road (without any slope) is known. This statistical function (ECE) was validated by real data measured in real traffic conditions. With the purpose to generalise the function and increase its applicability, considering that the consumption of a vehicle on horizontal road is not always available, the nonslope fuel consumption has been calculated through Copert 4 methodology, which is the official methodology developed by the European Environmental Agency (EEA) for emissions and fuel consumption calculation based on experimental data, but without taking into consideration the road’s slope. The Estimated Consumption Equation (ECE) applied to the consumption calculated through Copert 4 methodology is also validated using real data measured in real traffic conditions. It was verified that this function considerably adjusts to reality, with an error on the accumulated consumption compared to the real test of 1% and a correlation with the real test immediate fuel consumption of 0,93. It is concluded that the Estimated Consumption Equation (ECE) enables to predict the effect of the slope on the fuel consumption of a car in real traffic conditions with an error less than 1%.