Space debris attitude simulation - ιOTA (In-Orbit Tumbling Analysis)

Today, there is little knowledge on the attitude state of decommissioned intact objects in Earth orbit. Observational means have advanced in the past years, but are still limited with respect to an accurate estimate of motion vector orientations and magnitude. Especially for the preparation of Active Debris Removal (ADR) missions as planned by ESA’s Clean Space initiative or contingency scenarios for ESA spacecraft like ENVISAT, such knowledge is needed. ESA's “Debris Attitude Motion Measurements and Modelling” project (ESA Contract No. 40000112447), led by the Astronomical Institute of the University of Bern (AIUB), addresses this problem. The goal of the project is to achieve a good understanding of the attitude evolution and the considerable internal and external effects which occur. To characterize the attitude state of selected targets in LEO and GTO, multiple observation methods are combined. Optical observations are carried out by AIUB, Satellite Laser Ranging (SLR) is performed by the Space Research Institute of the Austrian Academy of Sciences (IWF) and radar measurements and signal level determination are provided by the Fraunhofer Institute for High Frequency Physics and Radar Techniques (FHR). The In-Orbit Tumbling Analysis tool (ιOTA) is a prototype software, currently in development by Hyperschall Technologie Göttingen GmbH (HTG) within the framework of the project. ιOTA will be a highly modular software tool to perform short-(days), medium-(months) and long-term (years) propagation of the orbit and attitude motion (six degrees-of-freedom) of spacecraft in Earth orbit. The simulation takes into account all relevant acting forces and torques, including aerodynamic drag, solar radiation pressure, gravitational influences of Earth, Sun and Moon, eddy current damping, impulse and momentum transfer from space debris or micro meteoroid impact, as well as the optional definition of particular spacecraft specific influences like tank sloshing, reaction wheel behaviour, magnetic torquer activity and thruster firing. The purpose of ιOTA is to provide high accuracy short-term simulations to support observers and potential ADR missions, as well as medium-and long-term simulations to study the significance of the particular internal and external influences on the attitude, especially damping factors and momentum transfer. The simulation will also enable the investigation of the altitude dependency of the particular external influences. ιOTA's post-processing modules will generate synthetic measurements for observers and for software validation. The validation of the software will be done by cross-calibration with observations and measurements acquired by the project partners.

Photometric monitoring of non-resolved space debris and databases of optical light curves.

The population of space debris increased drastically during the last years. Collisions involving massive objects may produce large number of fragments leading to significantly growth of the space debris population. An effective remediation measure in order to stabilize the population in LEO, is therefore the removal of large, massive space debris. To remove these objects, not only precise orbits, but also more detailed information about their attitude states will be required. One important property of an object targeted for removal is its spin period and spin axis orientation. If we observe a rotating object, the observer sees different surface areas of the object which leads to changes in the measured intensity. Rotating objects will produce periodic brightness vari ations with frequencies which are related to the spin periods. Photometric monitoring is the real tool for remote diagnostics of the satellite rotation around its center of mass. This information is also useful, for example, in case of contingency. Moreover, it is also important to take into account the orientation of non-spherical body (e.g. space debris) in the numerical integration of its motion when a close approach with the another spacecr aft is predicted. We introduce the two databases of light curves: the AIUB data base, which contains about a thousand light curves of LEO, MEO and high-altitude debris objects (including a few functional objects) obtained over more than seven years, and the data base of the Astronomical Observatory of Odessa University (Ukraine), which contains the results of more than 10 years of photometric monitoring of functioning satellites and large space debris objects in low Earth orbit. AIUB used its 1m ZIMLAT telescope for all light curves. For tracking low-orbit satellites, the Astronomical Observatory of Odessa used the KT-50 telescope, which has an alt-azimuth mount and allows tracking objects moving at a high angular velocity. The diameter of the KT-50 main mirror is 0.5 m, and the focal length is 3 m. The Odessa's Atlas of light curves includes almost 5,5 thousand light curves for ~500 correlated objects from a time period of 2005-2014. The processing of light curves and the determination of the rotation period in the inertial frame is challenging. Extracted frequencies and reconstructed phases for some interesting targets, e.g. GLONASS satellites, for which also SLR data were available for confirmation, will be presented. The rotation of the Envisat satellite after its sudden failure will be analyzed. The deceleration of its rotation rate within 3 years is studied together with the attempt to determine the orientation of the rotation axis.

Entre la universidad, la empresa y el estado : Trayectorias personales, saberes y prácticas en la génesis del diseño industrial y de la comunicación visual en la Argentina. Décadas 1950 y 1960

El trabajo se propone analizar diferentes relaciones entre la universidad, la empresa privada y el Estado al momento del surgimiento del diseño industrial y de la comunicación visual, inscriptas bajo el ala del diseño como disciplina institucionalizada. Para tal fin haremos hincapié en las trayectorias de individuos y grupos que promovieron los nuevos espacios como cátedras, carreras, institutos, y departamentos en las universidades, departamentos y agencias en las empresas, e impulsaron la investigación y la formación especializada en una agencia estatal. A este respecto nos planteamos la reconstrucción y análisis de las posiciones y los tramas de relaciones sociales entre los actores, los liderazgos e ideas que confluyeron en ese marco institucionalizador. A fines de la década del ´50 se abrieron espacios en instituciones estatales ?universidades nacionales y agencias del Estado- desde los que se promovió la formación e investigación en diseño industrial y comunicación visual. Al mismo tiempo, en medio del proceso de industrialización que demandaba nuevos especialistas, las empresas privadas abrieron secciones específicas dedicadas a proyectar diseños integrales para sus productos. Para entender los sistemas de valores sobre los que se originaron estos espacios indagaremos en los documentos, artículos, libros y bienes materiales ?entre otros- que los propios actores pusieron en circulación en ese tiempo y lugar. Haremos foco en las categorías de análisis y en las definiciones por ellos dictadas en ese momento sobre el diseño. El impulso a esta nueva disciplina se abordará desde la complejidad de las trayectorias de estos agentes entendiendo la pluralidad de intereses, afinidades y razones dadas en los ámbitos público y privado. Desde esta perspectiva intentaremos dar cuenta de las historias de los individuos involucrados y de los grupos que integraron esos espacios, y su injerencia en la creación de una agencia estatal. Así podremos constatar los factores que determinaron las políticas de cambio, las prácticas y los métodos de estudio propuestos en la universidad, la empresa privada y el Estado

Entre la universidad, la empresa y el estado : Trayectorias personales, saberes y prácticas en la génesis del diseño industrial y de la comunicación visual en la Argentina. Décadas 1950 y 1960

El trabajo se propone analizar diferentes relaciones entre la universidad, la empresa privada y el Estado al momento del surgimiento del diseño industrial y de la comunicación visual, inscriptas bajo el ala del diseño como disciplina institucionalizada. Para tal fin haremos hincapié en las trayectorias de individuos y grupos que promovieron los nuevos espacios como cátedras, carreras, institutos, y departamentos en las universidades, departamentos y agencias en las empresas, e impulsaron la investigación y la formación especializada en una agencia estatal. A este respecto nos planteamos la reconstrucción y análisis de las posiciones y los tramas de relaciones sociales entre los actores, los liderazgos e ideas que confluyeron en ese marco institucionalizador. A fines de la década del ´50 se abrieron espacios en instituciones estatales ?universidades nacionales y agencias del Estado- desde los que se promovió la formación e investigación en diseño industrial y comunicación visual. Al mismo tiempo, en medio del proceso de industrialización que demandaba nuevos especialistas, las empresas privadas abrieron secciones específicas dedicadas a proyectar diseños integrales para sus productos. Para entender los sistemas de valores sobre los que se originaron estos espacios indagaremos en los documentos, artículos, libros y bienes materiales ?entre otros- que los propios actores pusieron en circulación en ese tiempo y lugar. Haremos foco en las categorías de análisis y en las definiciones por ellos dictadas en ese momento sobre el diseño. El impulso a esta nueva disciplina se abordará desde la complejidad de las trayectorias de estos agentes entendiendo la pluralidad de intereses, afinidades y razones dadas en los ámbitos público y privado. Desde esta perspectiva intentaremos dar cuenta de las historias de los individuos involucrados y de los grupos que integraron esos espacios, y su injerencia en la creación de una agencia estatal. Así podremos constatar los factores que determinaron las políticas de cambio, las prácticas y los métodos de estudio propuestos en la universidad, la empresa privada y el Estado

Entre la universidad, la empresa y el estado : Trayectorias personales, saberes y prácticas en la génesis del diseño industrial y de la comunicación visual en la Argentina. Décadas 1950 y 1960

El trabajo se propone analizar diferentes relaciones entre la universidad, la empresa privada y el Estado al momento del surgimiento del diseño industrial y de la comunicación visual, inscriptas bajo el ala del diseño como disciplina institucionalizada. Para tal fin haremos hincapié en las trayectorias de individuos y grupos que promovieron los nuevos espacios como cátedras, carreras, institutos, y departamentos en las universidades, departamentos y agencias en las empresas, e impulsaron la investigación y la formación especializada en una agencia estatal. A este respecto nos planteamos la reconstrucción y análisis de las posiciones y los tramas de relaciones sociales entre los actores, los liderazgos e ideas que confluyeron en ese marco institucionalizador. A fines de la década del ´50 se abrieron espacios en instituciones estatales ?universidades nacionales y agencias del Estado- desde los que se promovió la formación e investigación en diseño industrial y comunicación visual. Al mismo tiempo, en medio del proceso de industrialización que demandaba nuevos especialistas, las empresas privadas abrieron secciones específicas dedicadas a proyectar diseños integrales para sus productos. Para entender los sistemas de valores sobre los que se originaron estos espacios indagaremos en los documentos, artículos, libros y bienes materiales ?entre otros- que los propios actores pusieron en circulación en ese tiempo y lugar. Haremos foco en las categorías de análisis y en las definiciones por ellos dictadas en ese momento sobre el diseño. El impulso a esta nueva disciplina se abordará desde la complejidad de las trayectorias de estos agentes entendiendo la pluralidad de intereses, afinidades y razones dadas en los ámbitos público y privado. Desde esta perspectiva intentaremos dar cuenta de las historias de los individuos involucrados y de los grupos que integraron esos espacios, y su injerencia en la creación de una agencia estatal. Así podremos constatar los factores que determinaron las políticas de cambio, las prácticas y los métodos de estudio propuestos en la universidad, la empresa privada y el Estado

On the Closure of the Tame Automorphism Group of Affine Three-Space

We provide explicit families of tame automorphisms of the complex affine three-space which degenerate to wild automorphisms. This shows that the tame subgroup of the group of polynomial automorphisms of C3 is not closed, when the latter is seen as an infinite-dimensional algebraic group.

Rapid sizing tool for a low cost university microsatellite structure subsystem

In recent decays university class small satellites are creating many opportunities for space research and professional trainings while at the same time responding to constrained budgets. In this work the main focus is on developing a simple and rapid structural sizing tool considering the main objectives of a low cost university class microsatellite project. In satellite projects, structure subsystem is one of the influential subsystems as a driver of the cost and acceptance of the final design. At the first steps of such projects there is no confirmed data regarding the launch vehicle or even in some cases there is no data for the satellite payload. Due to these facts, developing simple sizing tools at conceptual design phase for obtaining an over view of the effect of different variables is useful before entering complex calculations in detailed design phases. In this study, after developing a simple analytical model of satellite structure subsystem, a design space is evaluated with practical boundaries considering mass and dimensions constraints of such projects. The results are useful to give initial insight to establish the system level structural sizing

Training project management complexity in postgraduate and continuing education programs: a learning strategy in the eshe (European Space of Higher Education) framework

The objective of this paper is to address the methodological process of a teaching strategy for training project management complexity in postgraduate programs. The proposal is made up of different methods —intuitive, comparative, deductive, case study, problem-solving Project-Based Learning— and different activities inside and outside the classroom. This integration of methods motivated the current use of the concept of “learning strategy”. The strategy has two phases: firstly, the integration of the competences —technical, behavioral and contextual—in real projects; and secondly, the learning activity was oriented in upper level of knowledge, the evaluating the complexity for projects management in real situations. Both the competences in the learning strategy and the Project Complexity Evaluation are based on the ICB of IPMA. The learning strategy is applied in an international Postgraduate Program —Erasmus Mundus Master of Science— with the participation of five Universities of the European Union. This master program is fruit of a cooperative experience from one Educative Innovation Group of the UPM -GIE-Project-, two Research Groups of the UPM and the collaboration with other external agents to the university. Some reflections on the experience and the main success factors in the learning strategy were presented in the paper

Training project management complexity in postgraduate and continuing education programs: a learning strategy in the eshe (European Space of Higher Education) framework

The objective of this paper is to address the methodological process of a teaching strategy for training project management complexity in postgraduate programs. The proposal is made up of different methods —intuitive, comparative, deductive, case study, problem-solving Project-Based Learning— and different activities inside and outside the classroom. This integration of methods motivated the current use of the concept of ―learning strategy‖. The strategy has two phases: firstly, the integration of the competences —technical, behavioral and contextual—in real projects; and secondly, the learning activity was oriented in upper level of knowledge, the evaluating the complexity for projects management in real situations. Both the competences in the learning strategy and the Project Complexity Evaluation are based on the ICB of IPMA. The learning strategy is applied in an international Postgraduate Program —Erasmus Mundus Master of Science— with the participation of five Universities of the European Union. This master program is fruit of a cooperative experience from one Educative Innovation Group of the UPM -GIE-Project-, two Research Groups of the UPM and the collaboration with other external agents to the university. Some reflections on the experience and the main success factors in the learning strategy were presented in the paper.

Multiobjective optimization applied to structural sizing of low cost university-class microsatellite projects

In recent years, there has been continuing interest in the participation of university research groups in space technology studies by means of their own microsatellites. The involvement in such projects has some inherent challenges, such as limited budget and facilities. Also, due to the fact that the main objective of these projects is for educational purposes, usually there are uncertainties regarding their in orbit mission and scientific payloads at the early phases of the project. On the other hand, there are predetermined limitations for their mass and volume budgets owing to the fact that most of them are launched as an auxiliary payload in which the launch cost is reduced considerably. The satellite structure subsystem is the one which is most affected by the launcher constraints. This can affect different aspects, including dimensions, strength and frequency requirements. In this paper, the main focus is on developing a structural design sizing tool containing not only the primary structures properties as variables but also the system level variables such as payload mass budget and satellite total mass and dimensions. This approach enables the design team to obtain better insight into the design in an extended design envelope. The structural design sizing tool is based on analytical structural design formulas and appropriate assumptions including both static and dynamic models of the satellite. Finally, a Genetic Algorithm (GA) multiobjective optimization is applied to the design space. The result is a Pareto-optimal based on two objectives, minimum satellite total mass and maximum payload mass budget, which gives a useful insight to the design team at the early phases of the design.

Calibration process on the study of new antenna array architectures for space communications

This paper introduces novel calibration processes applied to antenna arrays with new architectures and technologies designed to improve the performance of traditional earth stations for satellite communications due to the increasing requirement of data capacity during last decades. Besides, the Radiation Group from the Technical University of Madrid has been working on the development of new antenna arrays based on novel architecture and technologies along many projects as a solution for the ground segment in the early future. Nowadays, the calibration process is an interesting and cutting edge research field in a period of expansion with a lot of work to do for calibration in transmission and also for reception of these novel antennas under development.

Reversible Urban Entities. Improving public-to-private continuity.

The aim of this paper is to call into question those typologies conventionally used in developing the post-industrial urban fabric (streets, cityblocks, slabs, etc.), often catering to urban designs based on speculative interests and completely overlooking community interests. By defining the concepts of ?postpublic space? and ?reversible urban entities? and illustrating them with an exemplary case of Spanish residential architecture from the 1960s, we establish one possible way of tackling contemporary urban-residential projects. This alternative approach considers the relationship between residential systems and open space systems and promotes the continuity and/or alternation of scales between house and city in an effort to improve the urban quality of life for residents and external users.

The theory of electrostatic probes in strong magnetic fields : Thesis submitted to the Faculty of The Graduate School of the University of Colorado for the Degree Doctor of Philosophy Department of Aerospace Engineering Science

A theory is developed of an electrostatic probe in a fully-ionized plasma in the presence of a strong magnetic field. The ratio of electron Larmor radius to probe transverse dimension is assumed to be small. Poisson's equation, together with kinetic equations for ions and electrons are considered. An asymptotic perturbation method of multiple scales is used by considering the characteristic lengths appearing in the problem. The leading behavior of the solution is found. The results obtained appear to apply to weaker fields also, agreeing with the solutions known in the limit of no magnetic field. The range of potentials for wich results are presented is limited. The basic effects produced by the field are a depletion of the plasma near the probe and a non-monotonic potential surrounding the probe. The ion saturation current is not changed but changes appear in both the floating potential Vf and the slope of the current-voltage diagram at Vf. The transition region extends beyond the space potential Vs,at wich point the current is largely reduced. The diagram does not have an exponential form in this region as commonly assumed. There exists saturation in electron collection. The extent to which the plasma is disturbed is determined. A cylindrical probe has no solution because of a logarithmic singularity at infinity. Extensions of the theory are considered.

The University in the Cloud Computing.

With the advancement of Information and Communication Technology ICT which favors increasingly fast, easy, and accessible communication for all and which can reach large groups of people, there have been changes, in recent years in our society that have modified the way we interact, communicate and transmit information. Access to this, it is possible, not only through computers situated in a fixed location, but new mobile devices make it available, wherever the user happens to be located. Now, information "travels" with the user. These forms of communication, transmission and access to information, have also affected the way to conceive and manage business. To these new forms of business that the Internet has brought, is now added the concept of companies in the Cloud Computing ClC. The ClC technology is based on the supply and consumption of services on demand and pay per use, and it gives a 180 degree turn to the business management concept. Small and large businesses may use the latest developments in ICT, to manage their organizations without the need for expensive investments in them. This will enable enterprises to focus more specifically within the scope of their business, leaving the ICT control to the experts. We believe that education can also and should benefit from these new philosophies. ?Due to the global economic crisis in general and each country in particular, economic cutbacks have come to most universities. These are seen in the need to raise tuition rates, which makes increasingly fewer students have the opportunity to pursue higher education?. In this paper we propose using ClC technologies in universities and we make a dissertation on the advantages that it can provide to both: universities and students. For the universities, we expose two focuses, one: ?to reorganize university ICT structures with the ClC philosophy? and the other one, ?to extend the offer of the university education with education on demand?. Regarding the former we propose to use public or private Clouds, to reuse resources across the education community, to save costs on infrastructure investment, in upgrades and in maintenance of ICT, and paying only for what you use and with the ability to scale according to needs. Regarding the latter, we propose an educational model in the ClC, to increase the current university offerings, using educational units in the form of low-cost services and where students pay only for the units consumed on demand. For the students, they could study at any university in the world (virtually), from anywhere, without travel costs: money and time, and what is most important paying only for what they consume. We think that this proposal of education on demand may represent a great change in the current educational model, because strict registration deadlines disappear, and also the problem of economically disadvantaged students, who will not have to raise large amounts of money for an annual tuition. Also it will decrease the problem of loss of the money invested in an enrollment when the student dropout. In summary we think that this proposal is interesting for both, universities and students, we aim for "Higher education from anywhere, with access from any mobile device, at any time, without requiring large investments for students, and with reuse and optimization of resources by universities. Cost by consumption and consumption by service?. We argue for a Universal University "wisdom and knowledge accessible to all?