Court-provided trial technology : efficiency and fairness for criminal trials

In Australia, trials conducted as 'electronic trials' have ordinarily run with the assistance of commercial service providers, with the associated costs being borne by the parties. However, an innovative approach has been taken by the courts in Queensland. In October 2007 Queensland became the first Australian jurisdiction to develop its own court-provided technology, to facilitate the conduct of an electronic trial. This technology was first used in the conduct of civil trials. The use of the technology in the civil sphere highlighted its benefits and, more significantly, demonstrated the potential to achieve much greater efficiencies. The Queensland courts have now gone further, using the court-provided technology in the high proffle criminal trial of R v Hargraves, Hargraves and Stoten, in which the three accused were tried for conspiracy to defraud the Commonwealth of Australia of about $3.7 million in tax. This paper explains the technology employed in this case and reports on the perspectives of all of the participants in the process. The representatives for all parties involved in this trial acknowledged, without reservation, that the use of the technology at trial produced considerable overall efficiencies and costs savings. The experience in this trial also demonstrates that the benefits of trial technology for the criminal justice process are greater than those for civil litigation. It shows that, when skilfully employed, trial technology presents opportunities to enhance the fairness of trials for accused persons. The paper urges governments, courts and the judiciary in all jurisdictions to continue their efforts to promote change, and to introduce mechanisms to facilitate more broadly a shift from the entrenched paper-based approach to both criminal and civil procedure to one which embraces more broadly the enormous benefits trial technology has to offer.

A restrike waveform predictive model for shunt capacitor bank switching with point-on-wave recommendation

Circuit-breakers (CBs) are subject to electrical stresses with restrikes during capacitor bank operation. Stresses are caused by the overvoltages across CBs, the interrupting currents and the rate of rise of recovery voltage (RRRV). Such electrical stresses also depend on the types of system grounding and the types of dielectric strength curves. The aim of this study is to demonstrate a restrike waveform predictive model for a SF6 CB that considered the types of system grounding: grounded and non-grounded and the computation accuracy comparison on the application of the cold withstand dielectric strength and the hot recovery dielectric strength curve including the POW (point-on-wave) recommendations to make an assessment of increasing the CB remaining life. The simulation of SF6 CB stresses in a typical 400 kV system was undertaken and the results in the applications are presented. The simulated restrike waveforms produced with the identified features using wavelet transform can be used for restrike diagnostic algorithm development with wavelet transform to locate a substation with breaker restrikes. This study found that the hot withstand dielectric strength curve has less magnitude than the cold withstand dielectric strength curve for restrike simulation results. Computation accuracy improved with the hot withstand dielectric strength and POW controlled switching can increase the life for a SF6 CB.

Use of virtual index for measuring efficiency of innovation systems : a cross-country study

In this study we propose a virtual index for measuring the relative innovativeness of countries. Using a multistage virtual benchmarking process, the best and rational benchmark is extracted for inefficient ISs. Furthermore, Tobit and Ordinary Least Squares (OLS) regression models are used to investigate the likelihood of changes in inefficiencies by investigating country-specific factors. The empirical results relating to the virtual benchmarking process suggest that the OLS regression model would better explain changes in the performance of innovation- inefficient countries.

Correction to “The Importance of Convexity in Learning With Squared Loss” [Sep 98 1974-1980]

The paper "the importance of convexity in learning with squared loss" gave a lower bound on the sample complexity of learning with quadratic loss using a nonconvex function class. The proof contains an error. We show that the lower bound is true under a stronger condition that holds for many cases of interest.

The Relative Efficiency of International, Domestic, and Budget Airlines : Nonparametric Evidence

This study determines whether the inclusion of low-cost airlines in a dataset of international and domestic airlines has an impact on the efficiency scores of so-called ‘prestigious’ purportedly ‘efficient’ airlines. This is because while many airline studies concern efficiency, none has truly included a combination of international, domestic and budget airlines. The present study employs the nonparametric technique of data envelopment analysis (DEA) to investigate the technical efficiency of 53 airlines in 2006. The findings reveal that the majority of budget airlines are efficient relative to their more prestigious counterparts. Moreover, most airlines identified as inefficient are so largely because of the overutilization of non-flight assets.

Productivity, Technical and Efficiency Change in Singapore’s Services Sector, 2005 to 2008

The current study was motivated by statements made by the Economic Strategies Committee that Singapore’s recent productivity levels in services were well below countries such as the US, Japan and Hong Kong. Massive employment of foreign workers was cited as the reason for poor productivity levels. To shed more light on Singapore’s falling productivity, a nonparametric Malmquist productivity index was employed which provides measures of productivity change, technical change and efficiency change. The findings reveal that growth in total factor productivity was attributed to technical change with no improvement in efficiency change. Such results suggest that gains from TFP were input-driven rather than from a ‘best-practice’ approach such as improvements in operations or better resource allocation.

Malnutrition and clinical outcomes in elderly patients from a Singapore acute hospital

Older adults, especially those acutely ill, are vulnerable to developing malnutrition due to a range of risk factors. The high prevalence and extensive consequences of malnutrition in hospitalised older adults have been reported extensively. However, there are few well-designed longitudinal studies that report the independent relationship between malnutrition and clinical outcomes after adjustment for a wide range of covariates. Acutely ill older adults are exceptionally prone to nutritional decline during hospitalisation, but few reports have studied this change and impact on clinical outcomes. In the rapidly ageing Singapore population, all this evidence is lacking, and the characteristics associated with the risk of malnutrition are also not well-documented. Despite the evidence on malnutrition prevalence, it is often under-recognised and under-treated. It is therefore crucial that validated nutrition screening and assessment tools are used for early identification of malnutrition. Although many nutrition screening and assessment tools are available, there is no universally accepted method for defining malnutrition risk and nutritional status. Most existing tools have been validated amongst Caucasians using various approaches, but they are rarely reported in the Asian elderly and none has been validated in Singapore. Due to the multiethnicity, cultural, and language differences in Singapore older adults, the results from non-Asian validation studies may not be applicable. Therefore it is important to identify validated population and setting specific nutrition screening and assessment methods to accurately detect and diagnose malnutrition in Singapore. The aims of this study are therefore to: i) characterise hospitalised elderly in a Singapore acute hospital; ii) describe the extent and impact of admission malnutrition; iii) identify and evaluate suitable methods for nutritional screening and assessment; and iv) examine changes in nutritional status during admission and their impact on clinical outcomes. A total of 281 participants, with a mean (+SD) age of 81.3 (+7.6) years, were recruited from three geriatric wards in Tan Tock Seng Hospital over a period of eight months. They were predominantly Chinese (83%) and community-dwellers (97%). They were screened within 72 hours of admission by a single dietetic technician using four nutrition screening tools [Tan Tock Seng Hospital Nutrition Screening Tool (TTSH NST), Nutritional Risk Screening 2002 (NRS 2002), Mini Nutritional Assessment-Short Form (MNA-SF), and Short Nutritional Assessment Questionnaire (SNAQ©)] that were administered in no particular order. The total scores were not computed during the screening process so that the dietetic technician was blinded to the results of all the tools. Nutritional status was assessed by a single dietitian, who was blinded to the screening results, using four malnutrition assessment methods [Subjective Global Assessment (SGA), Mini Nutritional Assessment (MNA), body mass index (BMI), and corrected arm muscle area (CAMA)]. The SGA rating was completed prior to computation of the total MNA score to minimise bias. Participants were reassessed for weight, arm anthropometry (mid-arm circumference, triceps skinfold thickness), and SGA rating at discharge from the ward. The nutritional assessment tools and indices were validated against clinical outcomes (length of stay (LOS) >11days, discharge to higher level care, 3-month readmission, 6-month mortality, and 6-month Modified Barthel Index) using multivariate logistic regression. The covariates included age, gender, race, dementia (defined using DSM IV criteria), depression (defined using a single question “Do you often feel sad or depressed?”), severity of illness (defined using a modified version of the Severity of Illness Index), comorbidities (defined using Charlson Comorbidity Index, number of prescribed drugs and admission functional status (measured using Modified Barthel Index; MBI). The nutrition screening tools were validated against the SGA, which was found to be the most appropriate nutritional assessment tool from this study (refer section 5.6) Prevalence of malnutrition on admission was 35% (defined by SGA), and it was significantly associated with characteristics such as swallowing impairment (malnourished vs well-nourished: 20% vs 5%), poor appetite (77% vs 24%), dementia (44% vs 28%), depression (34% vs 22%), and poor functional status (MBI 48.3+29.8 vs 65.1+25.4). The SGA had the highest completion rate (100%) and was predictive of the highest number of clinical outcomes: LOS >11days (OR 2.11, 95% CI [1.17- 3.83]), 3-month readmission (OR 1.90, 95% CI [1.05-3.42]) and 6-month mortality (OR 3.04, 95% CI [1.28-7.18]), independent of a comprehensive range of covariates including functional status, disease severity and cognitive function. SGA is therefore the most appropriate nutritional assessment tool for defining malnutrition. The TTSH NST was identified as the most suitable nutritional screening tool with the best diagnostic performance against the SGA (AUC 0.865, sensitivity 84%, specificity 79%). Overall, 44% of participants experienced weight loss during hospitalisation, and 27% had weight loss >1% per week over median LOS 9 days (range 2-50). Wellnourished (45%) and malnourished (43%) participants were equally prone to experiencing decline in nutritional status (defined by weight loss >1% per week). Those with reduced nutritional status were more likely to be discharged to higher level care (adjusted OR 2.46, 95% CI [1.27-4.70]). This study is the first to characterise malnourished hospitalised older adults in Singapore. It is also one of the very few studies to (a) evaluate the association of admission malnutrition with clinical outcomes in a multivariate model; (b) determine the change in their nutritional status during admission; and (c) evaluate the validity of nutritional screening and assessment tools amongst hospitalised older adults in an Asian population. Results clearly highlight that admission malnutrition and deterioration in nutritional status are prevalent and are associated with adverse clinical outcomes in hospitalised older adults. With older adults being vulnerable to risks and consequences of malnutrition, it is important that they are systematically screened so timely and appropriate intervention can be provided. The findings highlighted in this thesis provide an evidence base for, and confirm the validity of the current nutrition screening and assessment tools used among hospitalised older adults in Singapore. As the older adults may have developed malnutrition prior to hospital admission, or experienced clinically significant weight loss of >1% per week of hospitalisation, screening of the elderly should be initiated in the community and continuous nutritional monitoring should extend beyond hospitalisation.

Surveying the state of higher education in energy efficiency, in Australian engineering curriculum

This paper presents the method and results of a survey of 27 of the 33 Australian universities teaching engineering education in late 2007, undertaken by The Natural Edge Project (hosted by Griffith University and the Australian National University) and supported by the National Framework for Energy Efficiency. This survey aimed to ascertain the extent of energy efficiency (EE) education, and to identify preferred methods to assist in increasing the extent to which EE education is embedded in engineering curriculum. In this paper the context for the survey is supported by a summary of the key results from a variety of surveys undertaken over the last decade internationally. The paper concludes that EE education across universities and engineering disciplines in Australia is currently highly variable and ad hoc. Based on the results of the survey, this paper highlights a number of preferred options to support educators to embed sustainability within engineering programs, and future opportunities for monitoring EE, within the context of engineering education for sustainable development (EESD).

Analysis of efficiency and optimization of plasmon energy coupling into nanofocusing metal wedges

In this paper, we investigate theoretically and numerically the efficiency of energy coupling from a plasmon generated by a grating coupler at one of the interfaces of a metal wedge into the plasmonic eigenmode (i.e., symmetric or quasisymmetric plasmon) experiencing nanofocusing in the wedge. Thus the energy efficiency of energy coupling into metallic nanofocusing structure is analyzed. Two different nanofocusing structures with the metal wedge surrounded by a uniform dielectric (symmetric structure) and with the metal wedge enclosed between a substrate and a cladding with different dielectricpermittivities (asymmetric structure) are considered by means of the geometrical optics (adiabatic) approximation. It is demonstrated that the efficiency of the energy coupling from the plasmon generated by the grating into the symmetric or quasisymmetric plasmon experiencing nanofocusing may vary between ∼50% to ∼100%. In particular, even a very small difference (of ∼1%–2%) between the permittivities of the substrate and the cladding may result in a significant increase in the efficiency of the energy coupling (from ∼50% up to ∼100%) into the plasmon experiencing nanofocusing. Distinct beat patterns produced by the interference of the symmetric (quasisymmetric) and antisymmetric (quasiantisymmetric) plasmons are predicted and analyzed with significant oscillations of the magnetic and electric field amplitudes at both the metal wedge interfaces. Physical interpretations of the predicted effects are based upon the behavior, dispersion, and dissipation of the symmetric (quasisymmetric) and antisymmetric (quasiantisymmetric) filmplasmons in the nanofocusing metal wedge. The obtained results will be important for optimizing metallic nanofocusing structures and minimizing coupling and dissipative losses.

Measuring and decomposing changes in agricultural productivity, nitrogen use efficiency and cumulative exergy efficiency: Application to OECD agriculture

This paper uses an aggregate quantity space to decompose the temporal changes in nitrogen use efficiency and cumulative exergy use efficiency into changes of Moorsteen–Bjurek (MB) Total Factor Productivity (TFP) changes and changes in the aggregate nitrogen and cumulative exergy contents. Changes in productivity can be broken into technical change and changes in various efficiency measures such as technical efficiency, scale efficiency and residual mix efficiency. Changes in the aggregate nitrogen and cumulative exergy contents can be driven by changes in the quality of inputs and outputs and changes in the mixes of inputs and outputs. Also with cumulative exergy content analysis, changes in the efficiency in input production can increase or decrease the cumulative exergy transformity of agricultural production. The empirical study in 30 member countries of the Organisation for Economic Co-operation Development from 1990 to 2003 yielded some important findings. The production technology progressed but there were reductions in technical efficiency, scale efficiency and residual mix efficiency levels. This result suggests that the production frontier had shifted up but there existed lags in the responses of member countries to the technological change. Given TFP growth, improvements in nutrient use efficiency and cumulative exergy use efficiency were counteracted by reductions in the changes of the aggregate nitrogen contents ratio and aggregate cumulative exergy contents ratio. The empirical results also confirmed that different combinations of inputs and outputs as well as the quality of inputs and outputs could have more influence on the growth of nutrient and cumulative exergy use efficiency than factors that had driven productivity change. Keywords: Nutrient use efficiency; Cumulative exergy use efficiency; Thermodynamic efficiency change; Productivity growth; OECD agriculture; Sustainability