958 resultados para PowerPlex (R) 16 System
Resumo:
This paper examines a number of issues in sustainable energy generation and distribution, and explores avenues that are available for integration of our society’s energy supplies. In particular, the paper presents a way in which transport vehicle energy supplies could be integrated with distributed generation schemes to achieve synergistic and beneficial outcomes. The worldwide energy system contains fundamental problems that result directly from the use of unsustainable fuels and a lack of energy system integration. There is a need to adopt an integrated, sustainable energy system for our society. The adoption of distributed generation could result in beneficial restructuring of the energy trade, and a change in the role of energy providers. Inherent benefits in distributed generation schemes would directly combat barriers to installation of renewable generation facilities, which might prove distributed renewable energy sources to be more feasible. The presence of fuel cells, batteries, power electronic inverters and intelligent controls in vehicles of the future provides many opportunities for the integration of vehicle energy supplies into a distributed generation scheme. In such a system, vehicles could play a major role in power generation and storage.
Resumo:
The IEC 61850 family of standards for substation communication systems were released in the early 2000s, and include IEC 61850-8-1 and IEC 61850-9-2 that enable Ethernet to be used for process-level connections between transmission substation switchyards and control rooms. This paper presents an investigation of process bus protection performance, as the in-service behavior of multi-function process buses is largely unknown. An experimental approach was adopted that used a Real Time Digital Simulator and 'live' substation automation devices. The effect of sampling synchronization error and network traffic on transformer differential protection performance was assessed and compared to conventional hard-wired connections. Ethernet was used for all sampled value measurements, circuit breaker tripping, transformer tap-changer position reports and Precision Time Protocol synchronization of sampled value merging unit sampling. Test results showed that the protection relay under investigation operated correctly with process bus network traffic approaching 100% capacity. The protection system was not adversely affected by synchronizing errors significantly larger than the standards permit, suggesting these requirements may be overly conservative. This 'closed loop' approach, using substation automation hardware, validated the operation of protection relays under extreme conditions. Digital connections using a single shared Ethernet network outperformed conventional hard-wired solutions.
Resumo:
The term fashion system describes inter-relationships between production and consumption illustrating how the production of fashion is a collective activity. For instance, Yuniya Kawamura notes systems for the production of fashion differ around the globe and are subject to constant change, and Jennifer Craik draws attention to an ‘array of competing and intermeshing systems cutting across western and non-western cultures. In China, Shanghai’s nascent fashion system seeks to emulate the Eurocentric system of Fashion Weeks and industry support groups. It promises emergent designers a platform for global competition, yet there are tensions from within. Interaction with a fashion system inevitably means becoming validated or legitimised. Legitimisation in turn depends upon gatekeepers who make aesthetic judgments about the status, quality and cultural value of a designers work. Notwithstanding the proliferation of fashion media, in Shanghai a new gatekeeper has arrived, seeking to filter authenticity from artifice, offering truth in a fashion market saturated with fakery and the hollowness of foreign consumptive practice, and providing a place of sanctuary for Chinese fashion design. Thus this paper discusses how new agencies are allowing designers in Shanghai greater control over their brand image while creating novel opportunities for promotion and sales. It explores why designers choose this new model and provides new knowledge of the curation of fashion by these gatekeepers.
Resumo:
Indigenous juveniles (those aged 10 to 16 years in Queensland and 10 to 17 years in all other jurisdictions) are over-represented at all stages of the criminal justice system, and their over-representation becomes more pronounced at the most severe end of the system (ie in detention). Recent figures show that Indigenous juveniles are 24 times as likely to be detained in a juvenile correctional facility as non-Indigenous juveniles (Richards & Lyneham 2010). A variety of explanations for this over-representation have been proposed, including: • lack of access or disparate access to diversionary programs (Allard et al. 2010; Cunneen 2008; Snowball 2008); • systemic discrimination against Indigenous juveniles (eg police bias against Indigenous juveniles) (Cunneen 2008; Kenny & Lennings 2007); • inadequate resourcing of Aboriginal legal services (Cunneen & Schwartz 2008); and • genuinely higher levels of offending by Indigenous juveniles (Kenny & Lennings 2007; Weatherburn et al. 2003). A range of measures (including diversion and juvenile conferencing programs) has recently been implemented to reduce the over-representation of Indigenous juveniles in detention, and minimise the contact of juveniles with the formal criminal justice system. Diversionary measures can only have a limited impact, however, and reducing offending and reoffending have been identified as critical factors to address if the over-representation of Indigenous juveniles is to be reduced (Allard et al. 2010; Weatherburn et al. 2003). While acknowledging that other measures designed to reduce the over-representation of Indigenous juveniles are important, this paper reviews the evidence on policies and programs that reduce offending by Indigenous juveniles in Australia. Where relevant, research from comparable jurisdictions, such as New Zealand and Canada, is also discussed.
Resumo:
Microvessel density (MVD) is a widely used surrogate measure of angiogenesis in pathological specimens and tumour models. Measurement of MVD can be achieved by several methods. Automation of counting methods aims to increase the speed, reliability and reproducibility of these techniques. The image analysis system described here enables MVD measurement to be carried out with minimal expense in any reasonably equipped pathology department or laboratory. It is demonstrated that the system translates easily between tumour types which are suitably stained with minimal calibration. The aim of this paper is to offer this technique to a wider field of researchers in angiogenesis.
Resumo:
Background Adenocarcinoma of the esophagogastric junction (AEG) as described by Siewert et al. is classified as one entity in the latest (7th Edition) American Joint Cancer Committee/International Union Against Cancer (AJCC/UICC) manual, compared with the previous mix of esophageal and gastric staging systems. The origin of AEG tumors, esophageal or gastric, and their biology remain controversial, particularly for AEG type II (cardia) tumors. Methods We adapted a large prospective database (n = 520: 180 type I, 182 type II, 158 type III) to compare AEG tumors under the new TNM system Pathological variables associated with prognosis were compared (pT, pN, stage, differentiation, R status, lymphovascular invasion, perineural involvement, number of positive nodes, percent of positive nodes, and tumor length), as well as overall survival. Results Compared with AEG type I tumors, type II and type III tumors had significantly (p\0.05) more advanced pN stages, greater number and percentage of positive nodes, poorer differentiation, more radial margin involvement, and more perineural invasion. In AEG type I, 14/180 patients (8%) had[6 involved nodes (pN3), compared with 16 and 30% of patients classified type II and III, respectively. Median survival was significantly (p = 0.03) improved for type I patients (38 months) compared with those with tumors classified as type II (28 months) and type III (24 months). In multivariate analysis node positivity and pN staging but not AEG site had an impact on survival. Conclusions In this series AEG type I is associated with more favorable pathologic features and improved outcomes compared with AEG type II and III. This may reflect earlier diagnosis, but an alternative possibility, that type I may be a unique paradigm with more favorable biology, requires further study. © Société Internationale de Chirurgie 2010.
Resumo:
Background Commercially available instrumented treadmill systems that provide continuous measures of temporospatial gait parameters have recently become available for clinical gait analysis. This study evaluated the level of agreement between temporospatial gait parameters derived from a new instrumented treadmill, which incorporated a capacitance-based pressure array, with those measured by a conventional instrumented walkway (criterion standard). Methods Temporospatial gait parameters were estimated from 39 healthy adults while walking over an instrumented walkway (GAITRite®) and instrumented treadmill system (Zebris) at matched speed. Differences in temporospatial parameters derived from the two systems were evaluated using repeated measures ANOVA models. Pearson-product-moment correlations were used to investigate relationships between variables measured by each system. Agreement was assessed by calculating the bias and 95% limits of agreement. Results All temporospatial parameters measured via the instrumented walkway were significantly different from those obtained from the instrumented treadmill (P < .01). Temporospatial parameters derived from the two systems were highly correlated (r, 0.79–0.95). The 95% limits of agreement for temporal parameters were typically less than ±2% of gait cycle duration. However, 95% limits of agreement for spatial measures were as much as ±5 cm. Conclusions Differences in temporospatial parameters between systems were small but statistically significant and of similar magnitude to changes reported between shod and unshod gait in healthy young adults. Temporospatial parameters derived from an instrumented treadmill, therefore, are not representative of those obtained from an instrumented walkway and should not be interpreted with reference to literature on overground walking.
Resumo:
Multiple reaction monitoring (MRM) mass spectrometry coupled with stable isotope dilution (SID) and liquid chromatography (LC) is increasingly used in biological and clinical studies for precise and reproducible quantification of peptides and proteins in complex sample matrices. Robust LC-SID-MRM-MS-based assays that can be replicated across laboratories and ultimately in clinical laboratory settings require standardized protocols to demonstrate that the analysis platforms are performing adequately. We developed a system suitability protocol (SSP), which employs a predigested mixture of six proteins, to facilitate performance evaluation of LC-SID-MRM-MS instrument platforms, configured with nanoflow-LC systems interfaced to triple quadrupole mass spectrometers. The SSP was designed for use with low multiplex analyses as well as high multiplex approaches when software-driven scheduling of data acquisition is required. Performance was assessed by monitoring of a range of chromatographic and mass spectrometric metrics including peak width, chromatographic resolution, peak capacity, and the variability in peak area and analyte retention time (RT) stability. The SSP, which was evaluated in 11 laboratories on a total of 15 different instruments, enabled early diagnoses of LC and MS anomalies that indicated suboptimal LC-MRM-MS performance. The observed range in variation of each of the metrics scrutinized serves to define the criteria for optimized LC-SID-MRM-MS platforms for routine use, with pass/fail criteria for system suitability performance measures defined as peak area coefficient of variation <0.15, peak width coefficient of variation <0.15, standard deviation of RT <0.15 min (9 s), and the RT drift <0.5min (30 s). The deleterious effect of a marginally performing LC-SID-MRM-MS system on the limit of quantification (LOQ) in targeted quantitative assays illustrates the use and need for a SSP to establish robust and reliable system performance. Use of a SSP helps to ensure that analyte quantification measurements can be replicated with good precision within and across multiple laboratories and should facilitate more widespread use of MRM-MS technology by the basic biomedical and clinical laboratory research communities.
Resumo:
The interpretation and application of the United Nations Convention on the Law of the Sea (UNCLOS) may be the source of many disputes. UNCLOS introduced an à la carte menu for dispute settlement with a number of options for international dispute resolution, including a compulsory procedure entailing binding decisions. While drafting this ambitious and complex system of dispute settlement, the drafters had to negotiate many delicate compromises to secure a system for the uniform interpretation of the Convention. The aim of this paper r is to explore why litigation using the UNCLOS dispute settlement system is, or is not, a preferred mode of settlement for law of the sea disputes.
Resumo:
An on-road study was conducted to evaluate a complementary tactile navigation signal on driving behaviour and eye movements for drivers with hearing loss (HL) compared to drivers with normal hearing (NH). 32 participants (16 HL and 16 NH) performed two preprogrammed navigation tasks. In one, participants received only visual information, while the other also included a vibration in the seat to guide them in the correct direction. SMI glasses were used for eye tracking, recording the point of gaze within the scene. Analysis was performed on predefined regions. A questionnaire examined participant's experience of the navigation systems. Hearing loss was associated with lower speed, higher satisfaction with the tactile signal and more glances in the rear view mirror. Additionally, tactile support led to less time spent viewing the navigation display.
Resumo:
We have developed a method to test the cytotoxicity of wound dressings, ointments, creams and gels used in our Burn Centre, by placing them on a permeable Nunc Polycarbonate cell culture insert, incubated with a monolayer of cells (HaCaTs and primary human keratinocytes). METHODS: We performed two different methods to determine the relative toxicity to cells. (1) Photo visualisation: The dressings or compounds were positioned on the insert's membrane which was placed onto the monolayer tissue culture plate. After 24 h the surviving adherent cells were stained with Toluidine Blue and photos of the plates were taken. The acellular area of non-adherent dead cells which had been washed off with buffer was measured as a percentage of the total area of the plate. (2) Cell count of surviving cells: After 24 h incubation with the test material, the remaining cells were detached with trypsin, spun down and counted in a Haemocytometer with Trypan Blue, which differentiates between live and dead cells. RESULTS: Seventeen products were tested. The least cytotoxic products were Melolite, White soft Paraffin and Chlorsig1% Ointment. Some cytotoxicity was shown with Jelonet, Mepitel((R)), PolyMem((R)), DuoDerm((R)) and Xeroform. The most cytotoxic products included those which contained silver or Chlorhexidine and Paraffin Cream a moisturizer which contains the preservative Chlorocresol. CONCLUSION: This in vitro cell culture insert method allows testing of agents without direct cell contact. It is easy and quick to perform, and should help the clinician to determine the relative cytotoxicity of various dressings and the optimal dressing for each individual wound.
Resumo:
This paper presents a new hybrid evolutionary algorithm based on Particle Swarm Optimization (PSO) and Ant Colony Optimization (ACO) for daily Volt/Var control in distribution system including Distributed Generators (DGs). Due to the small X/R ratio and radial configuration of distribution systems, DGs have much impact on this problem. Since DGs are independent power producers or private ownership, a price based methodology is proposed as a proper signal to encourage owners of DGs in active power generation. Generally, the daily Volt/Var control is a nonlinear optimization problem. Therefore, an efficient hybrid evolutionary method based on Particle Swarm Optimization and Ant Colony Optimization (ACO), called HPSO, is proposed to determine the active power values of DGs, reactive power values of capacitors and tap positions of transformers for the next day. The feasibility of the proposed algorithm is demonstrated and compared with methods based on the original PSO, ACO and GA algorithms on IEEE 34-bus distribution feeder.
Resumo:
Integration of rooftop PVs and increasing peak demand in the residential distribution networks has resulted in unacceptable voltage profile. Curtailing PV generation to alleviate overvoltage problem and making regular network investment to cater peak demand is not always feasible. Reactive capability of the PV inverter can be a solution to address voltage dip and over voltage problems to some extent. This paper proposes an algorithm to utilize reactive capability of PV inverters and investigate their effectiveness on feeder length and R/X ratio of the line. Feeder loading level for a particular R/X ratio to have acceptable voltage profile is also investigated. Furthermore, the need of appropriate feeder distances and R/X ratio for acceptable voltage profile, which can be useful for suburban design and distribution planning, is explored.
Resumo:
This paper describes the design and implementation of a wireless neural telemetry system that enables new experimental paradigms, such as neural recordings during rodent navigation in large outdoor environments. RoSco, short for Rodent Scope, is a small lightweight user-configurable module suitable for digital wireless recording from freely behaving small animals. Due to the digital transmission technology, RoSco has advantages over most other wireless modules of noise immunity and online user-configurable settings. RoSco digitally transmits entire neural waveforms for 14 of 16 channels at 20 kHz with 8-bit encoding which are streamed to the PC as standard USB audio packets. Up to 31 RoSco wireless modules can coexist in the same environment on non-overlapping independent channels. The design has spatial diversity reception via two antennas, which makes wireless communication resilient to fading and obstacles. In comparison with most existing wireless systems, this system has online user-selectable independent gain control of each channel in 8 factors from 500 to 32,000 times, two selectable ground references from a subset of channels, selectable channel grounding to disable noisy electrodes, and selectable bandwidth suitable for action potentials (300 Hz–3 kHz) and low frequency field potentials (4 Hz–3 kHz). Indoor and outdoor recordings taken from freely behaving rodents are shown to be comparable to a commercial wired system in sorting for neural populations. The module has low input referred noise, battery life of 1.5 hours and transmission losses of 0.1% up to a range of 10 m.