EFFECT of DIFFERENT SOLID AMOUNTS IN THE PHYSICAL and MICROSCOPICAL PROPERTIES of SiC POROUS CERAMICS

The presence of pores in ceramics is directly related to the chosen forming process. So, in the starch consolidation method, the ceramics show, after burning, pores with morphology similar to that presented by this organic material. on the other hand, the increase in solid load leads up to alterations in dispersion viscosity, increasing the thermal stresses during drying and sintering processes. In order to verify the solid percentage influence in ceramic final properties, samples were prepared with silicon carbide in different compositions using or not starch as binder agent and pore forming element. The characterization of the ceramic pieces was performed by superficial roughness measurements, porosity besides by optical and scanning electron microscopy. The results showed ceramics with SiC and starch presented physical and microscopic properties slightly higher in relation to those with only ceramic powder in their composition. The presence of organic material, agglomerated and foam during the forming were essential for the final properties of the studied samples.

Genetic parameter estimates for buffalo milk yield, milk quality and mozzarella production and Bayesian inference analysis of their relationships

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Physical and mechanical properties of thermally modified wood from E. grandis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Qualidades físicas e químicas do abacaxi comercializado na CEAGESP São Paulo

O presente trabalho buscou conhecer a variação das características físicas e químicas do abacaxi comercializado no Entreposto Terminal de São Paulo (ETSP), da Companhia de Entrepostos e Armazéns Gerais de São Paulo (CEAGESP), no período de setembro de 2005 a março de 2006. As avaliações foram realizadas na CEAGESP e nos laboratórios do Departamento de Agroindústria, Alimentos e Nutrição da Escola Superior de Agricultura Luiz de Queiroz - ESALQ/USP. Foram realizadas coletas em intervalos de duas semanas, em três atacadistas, com as amostras recolhidas de forma aleatória, padronizadas em frutos tipo 10 (caixa contendo 10 frutos), compostas de dez frutos por atacadista/origem. As amostras foram coletadas nos lotes oferecidos para comercialização pelos atacadistas. Foram avaliadas as seguintes características físicas e químicas: peso do fruto inteiro, peso da coroa, avaliação visual da coloração da casca, densidade, coloração da polpa, pH, teor de sólidos solúveis (SS), acidez titulável (AT), além da relação SS/AT. Para a análise estatística, foi utilizado o Programa SAS. Pelos resultados, observou-se que, dentre as regiões produtoras de abacaxi, destacaram-se, com relação à regularidade de oferta para os três atacadistas, os pólos de Canápolis ('Smooth Cayenne'), Sapé e Miracema do Tocantins ('Pérola'). As diferentes regiões produtoras de abacaxi 'Pérola' apresentaram uma grande variação em relação ao peso médio dos frutos comercializados, indicando diferenças na tecnologia de produção adotada. Dentre as regiões produtoras de abacaxi, houve variação estatística no teor de sólidos solúveis ao longo do período analisado nos pólos de Canápolis ('Smooth Cayenne') e Itaberaba, Sapé e Miracema do Tocantins ('Pérola'). Dentre os parâmetros químicos analisados, a determinação do teor de sólidos solúveis por amostragem com uso do refratômetro manual, associado à maturação aparente (cor da casca), pode representar um avanço significativo na indicação da qualidade dos frutos comercializados, o que permite concluir ser desnecessário o uso de etefon na fase de pré-colheita.

Physical resistance as a criterion in the selection of foraging material by Acromyrmex subterraneus brunneus Forel, 1911 (Hym., Formicidae)

Leaf-cutting ants forage on a wide variety of plant species using the physical and chemical characteristics of the plants as a selection criterion. In order to determine the influence of the physical factor on the selection of foraging material, inert materials such as floral sponge, polystyrene, plastic and clay, which possess different degrees of physical resistance to cutting, were offered simultaneously to five Acromyrmex subterraneus brunneus colonies, and assessed 12 and 24 h after foraging. No substrate selectivity was observed during foraging. Physical resistance was used as a decision criterion for the incorporation or return of the foraged material. This fact suggests the existence of a second time of selection of the foraged material inside the colony during cultivation of the symbiontic fungus.

Caracterização de água produzida na indústria de petróleo para fins de descarte e otimização do processo de separação óleo/água

The oil industry has several segments that can impact the environment. Among these, produced water which has been highlight in the environmental problem because of the great volume generated and its toxic composition. Those waters are the major source of waste in the oil industry. The composition of the produced water is strongly dependent on the production field. A good example is the wastewater produced on a Petrobras operating unit of Rio Grande do Norte and Ceará (UO-RNCE). A single effluent treatment station (ETS) of this unit receives effluent from 48 wells (onshore and offshore), which leads a large fluctuations in the water quality that can become a complicating factor for future treatment processes. The present work aims to realize a diagnosis of a sample of produced water from the OU - RNCE in compliance to certain physical and physico-chemical parameters (chloride concentration, conductivity, dissolved oxygen, pH, TOG (oil & grease), nitrate concentration, turbidity, salinity and temperature). The analysis of the effluent is accomplished by means of a MP TROLL 9500 Multiparameter probe, a TOG/TPH Infracal from Wilks Enterprise Corp. - Model HATR - T (TOG) and a MD-31 condutivimeter of Digimed. Results were analyzed by univariated and multivariated analysis (principal component analysis) associated statistical control charts. The multivariate analysis showed a negative correlation between dissolved oxygen and turbidity (-0.55) and positive correlations between salinity and chloride (1), conductivity, chloride and salinity (0.70). Multivariated analysis showed there are seven principal components which can explain the variability of the parameters. The variables, salinity, conductivity and chloride were the most important variables, with, higher sampling variance. Statistical control charts have helped to establish a general trend between the physical and chemical evaluated parameters

Estudo de um sistema híbrido de destilação solar para polimento de águas produzidas

The oil industry, experiencing a great economic and environmental impact, has increasingly invested in researches aiming a more satisfactory treatment of its largest effluent, i.e., produced water. These are mostly discarded at sea, without reuse and after a basic treatment. Such effluent contains a range of organic compounds with high toxicity and are difficult to remove, such as polycyclic aromatic hydrocarbons, salts, heavy metals, etc.. The main objective of this work was to study the solar distillation of produced water pre-treated to remove salts and other contaminants trough of a hybrid system with a pre-heater. This developed apparatus was called solar system, which consists of a solar heater and a conventional distillation solar still. The first device consisted of a water tank, a solar flat plate collector and a thermal reservoir. The solar distillator is of simple effect, with 1m2 of flat area and 20° of inclination. This dissertation was divided in five steps: measurements in the solar system, i.e. temperatures and distillate flow rate and weather data; modeling and simulation of the system; study of vapor-liquid equilibrium of the synthetic wastewater by the aqueous solution of p-xylene; physical and chemical analyses of samples of the feed, distillate and residue, as well as climatology pertinent variables of Natal-RN. The solar system was tested separately, with the supply water, aqueous NaCl and synthetic oil produced water. Temperature measurements were taken every minute of the thermal reservoir, water tank and distillator (liquid and vapor phases). Data of solar radiation and rainfall were obtained from INPE (National Institute for Space Research). The solar pre-heater demonstrated to be effective for the liquid systems tested. The reservoir fluid had an average temperature of 58°C, which enabled the feed to be pre-heated in the distillator. The temperature profile in the solar distillator showed a similar behavior to daily solar radiation, with temperatures near 70°C. The distillation had an average yield of 2.4 L /day, i.e., an efficiency of 27.2%. Mathematical modeling aided the identification of the most important variables and parameters in the solar system. The study of the vapor-liquid equilibrium from Total Organic Carbon (TOC) analysis indicated heteroazeotropia and the vapor phase resulted more concentrated in p-xylene. The physical-chemical analysis of pH, conductivity, Total Dissolved Solids (TDS), chlorides, cations (including heavy metals) and anions, the effluent distillate showed satisfactory results, which presents a potential for reuse. The climatological study indicates the region of Natal-RN as favorable to the operation of solar systems, but the use of auxiliary heating during periods of higher rainfall and cloud cover is also recommended

Reúso de água no processamento de jeans na indústria têxtil

This study aims to assess the potential for industrial reuse of textile wastewater, after passing through a physical and chemical pretreatment, into denim washing wet processing operations in an industrial textile laundry, with no need for complementary treatments and dilutions. The methodology and evaluation of the proposed tests were based on the production techniques used in the company and upgraded for the experiments tested. The characterization of the treated effluent for 16 selected parameters and the development of a monitoring able to tailor the treated effluent for final disposal in accordance with current legislation was essential for the initiation of testing for reuse. The parameters color, turbidity, SS and pH used were satisfactory as control variables and presents simple determination methods. The denim quality variables considered were: color, odor, appearance and soft handle. The tests were started on a pilot scale following complexity factors attributed to the processes, in denim fabric and jeans, which demonstrated the possibility of reuse, because there was no interference in the processes and at quality of the tested product. Industrial scale tests were initiated by a step control that confirmed the methodology efficiency applied to identify the possibility of reuse by tests that precede each recipe to be processed. 556 replicates were performed in production scale for 47 different recipes of denim washing. The percentage of water reuse was 100% for all processes and repetitions performed after the initial adjustment testing phase. All the jeans were framed with the highest quality for internal control and marketed, being accepted by contractors. The full-scale use of treated wastewater, supported by monitoring and evaluation and control methodology suggested in this study, proved to be valid in textile production, not given any negative impact to the quality the produced jeans under the presented conditions. It is believed that this methodology can be extrapolated to other laundries to determine the possibility of reuse in denim washing wet processing with the necessary modifications to each company.

Portable smart films for ultrasensitive detection and chemical analysis using SERS and SERRS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effects of oxidation of lysozyme by hypohalous acids and haloamines on enzymatic activity and aggregation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mutagenic evaluation and chemical investigation of Byrsonima intermedia A. Juss. leaf extracts

Byrsonima intermedia is a native species of the cerrado formation (tropical American savannah). In Brazil, this plant has been used for the treatment of fever, in ulcers, as a diuretic, as antiasthinatics and in skin infections. Members of the genus Byrsonima (Malpighiaceae) are employed not only in the folk medicine but also as food to make juice, jellies and liquor. The aim of this work was to evaluate the mutagenic effects of Byrsonima intermedia, common name 'murici'. Phytochernical analysis of methanol extract furnished (+)catechin, (-)-epicatechin, quercetin-3-O-beta-D-galactopyranoside, methyl gallate, gallic acid, quercetin-3-O-alpha-L-arabinopyranoside, amentoflavone, quercetin, querceti n-3-O-(2-O-galloyl)-beta-galactopyranoside and quei-eetin-3-O-(2-O-galloyl)-alpha-arabinopyranoside. Methanol, hydromethanol and chloroform extracts were evaluated in inutagenic assay with Salmonella typhimurium (Ames test) and mice (Micronucleus test). The methanolic extract presented signs of mutagenic activity for the strains TA98 and TA100 in the Ames assay. Mutagenicity was not observed in vivo. (c) 2007 Elsevier B.V.. All rights reserved.

Physical properties of pectin-high amylose starch mixtures cross-linked with sodium trimetaphosphate

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The definition of potential infiltration areas in Guaratingueta watershed, Paraiba do Sul Basin, Southeastern Brazil: an integrated approach using physical and land-use elements

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

SUGARCANE BAGASSE PULPING and BLEACHING: THERMAL and CHEMICAL CHARACTERIZATION

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)