High-Speed Laser Processing of Thin Single and Multi-Layer Films

Theoretical models are developed for the continuous-wave and pulsed laser incision and cut of thin single and multi-layer films. A one-dimensional steady-state model establishes the theoretical foundations of the problem by combining a power-balance integral with heat flow in the direction of laser motion. In this approach, classical modelling methods for laser processing are extended by introducing multi-layer optical absorption and thermal properties. The calculation domain is consequently divided in correspondence with the progressive removal of individual layers. A second, time-domain numerical model for the short-pulse laser ablation of metals accounts for changes in optical and thermal properties during a single laser pulse. With sufficient fluence, the target surface is heated towards its critical temperature and homogeneous boiling or "phase explosion" takes place. Improvements are seen over previous works with the more accurate calculation of optical absorption and shielding of the incident beam by the ablation products. A third, general time-domain numerical laser processing model combines ablation depth and energy absorption data from the short-pulse model with two-dimensional heat flow in an arbitrary multi-layer structure. Layer removal is the result of both progressive short-pulse ablation and classical vaporisation due to long-term heating of the sample. At low velocity, pulsed laser exposure of multi-layer films comprising aluminium-plastic and aluminium-paper are found to be characterised by short-pulse ablation of the metallic layer and vaporisation or degradation of the others due to thermal conduction from the former. At high velocity, all layers of the two films are ultimately removed by vaporisation or degradation as the average beam power is increased to achieve a complete cut. The transition velocity between the two characteristic removal types is shown to be a function of the pulse repetition rate. An experimental investigation validates the simulation results and provides new laser processing data for some typical packaging materials.

Modelli e linguaggi per grafi multi-livello

I grafi sono molto utilizzati per la rappresentazione di dati, sopratutto in quelle aree dove l’informazione sull’interconnettività e la topologia dei dati è importante tanto quanto i dati stessi, se non addirittura di più. Ogni area di applicazione ha delle proprie necessità, sia in termini del modello che rappresenta i dati, sia in termini del linguaggio capace di fornire la necessaria espressività per poter fare interrogazione e trasformazione dei dati. È sempre più frequente che si richieda di analizzare dati provenienti da diversi sistemi, oppure che si richieda di analizzare caratteristiche dello stesso sistema osservandolo a granularità differenti, in tempi differenti oppure considerando relazioni differenti. Il nostro scopo è stato quindi quello di creare un modello, che riesca a rappresentare in maniera semplice ed efficace i dati, in tutte queste situazioni. Entrando più nei dettagli, il modello permette non solo di analizzare la singola rete, ma di analizzare più reti, relazionandole tra loro. Il nostro scopo si è anche esteso nel definire un’algebra, che, tramite ai suoi operatori, permette di compiere delle interrogazioni su questo modello. La definizione del modello e degli operatori sono stati maggiormente guidati dal caso di studio dei social network, non tralasciando comunque di rimanere generali per fare altri tipi di analisi. In seguito abbiamo approfondito lo studio degli operatori, individuando delle proprietà utili per fare delle ottimizzazioni, ragionando sui dettagli implementativi, e fornendo degli algoritmi di alto livello. Per rendere più concreta la definizione del modello e degli operatori, in modo da non lasciare spazio ad ambiguità, è stata fatta anche un’implementazione, e in questo elaborato ne forniremo la descrizione.

Non-normal modal logics, quantification, and deontic dilemmas. A study in multi-relational semantics

This dissertation is devoted to the study of non-normal (modal) systems for deontic logics, both on the propositional level, and on the first order one. In particular we developed our study the Multi-relational setting that generalises standard Kripke Semantics. We present new completeness results concerning the semantic setting of several systems which are able to handle normative dilemmas and conflicts. Although primarily driven by issues related to the legal and moral field, these results are also relevant for the more theoretical field of Modal Logic itself, as we propose a syntactical, and semantic study of intermediate systems between the classical propositional calculus CPC and the minimal normal modal logic K.

Sense of Community in contexts of multi culture

The theme “Belongingness” has a central role in the current debate on Community Psychology and in daily life. To try to understand the consequences of these changes, the research focuses on the concept of Sense of Community. In fact, Sense of Community has always been a central tool (Sarason, 1974; MacMillan & Chavis, 1986) to study communities (McMillan, 2011; Nowell & Boyd, 2011) and for a long time has represented positive values and something to aspire to. However, current debates indicate that Sense of Community is an outmoded concept and underline the problematic issue of “promotion of Sense of Community” in contexts of multi culture. The aim of the present research is to analyze Sense of Community in context of multi culture, as we consider that it can still be a fundamental tool to study and understand communities. In particular we are interested in understanding the role of Multiple Sense of Community (Brodsky, 2009) on Identity and Wellbeing (and its dimensions). We focused on a specific context, the Station Zone in Reggio Emilia, that is characterized by high levels of cultural diversity and different social problems (Giovannini & Vezzali, 2011). The research is developed and divided into two parts. The first part consists of an exploratory qualitative study that analyzes meanings of community among leaders of different ethnic groups living in the Station Zone. The second part consists of a “General Model” study and four parallel studies to analyze Multiple Sense of Community in different ethnic groups (Albanians, Moroccans, Chinese and Italians. The results indicate the different role of Multiple SOC in the relation between Identity and Wellbeing, in particular the relevance of Relational SOC and its different implications. Moreover, the factor “culture” represents an significant element in order to consider differences among ethnic groups.

Use of shared memory in the context of embedded multi-core processors: exploration of the technology and its limits

Modern embedded systems embrace many-core shared-memory designs. Due to constrained power and area budgets, most of them feature software-managed scratchpad memories instead of data caches to increase the data locality. It is therefore programmers’ responsibility to explicitly manage the memory transfers, and this make programming these platform cumbersome. Moreover, complex modern applications must be adequately parallelized before they can the parallel potential of the platform into actual performance. To support this, programming languages were proposed, which work at a high level of abstraction, and rely on a runtime whose cost hinders performance, especially in embedded systems, where resources and power budget are constrained. This dissertation explores the applicability of the shared-memory paradigm on modern many-core systems, focusing on the ease-of-programming. It focuses on OpenMP, the de-facto standard for shared memory programming. In a first part, the cost of algorithms for synchronization and data partitioning are analyzed, and they are adapted to modern embedded many-cores. Then, the original design of an OpenMP runtime library is presented, which supports complex forms of parallelism such as multi-level and irregular parallelism. In the second part of the thesis, the focus is on heterogeneous systems, where hardware accelerators are coupled to (many-)cores to implement key functional kernels with orders-of-magnitude of speedup and energy efficiency compared to the “pure software” version. However, three main issues rise, namely i) platform design complexity, ii) architectural scalability and iii) programmability. To tackle them, a template for a generic hardware processing unit (HWPU) is proposed, which share the memory banks with cores, and the template for a scalable architecture is shown, which integrates them through the shared-memory system. Then, a full software stack and toolchain are developed to support platform design and to let programmers exploiting the accelerators of the platform. The OpenMP frontend is extended to interact with it.

Techniques and Methods for a multi-scale analysis of neuromuscular fatigue

This thesis proposes an integrated holistic approach to the study of neuromuscular fatigue in order to encompass all the causes and all the consequences underlying the phenomenon. Starting from the metabolic processes occurring at the cellular level, the reader is guided toward the physiological changes at the motorneuron and motor unit level and from this to the more general biomechanical alterations. In Chapter 1 a list of the various definitions for fatigue spanning several contexts has been reported. In Chapter 2, the electrophysiological changes in terms of motor unit behavior and descending neural drive to the muscle have been studied extensively as well as the biomechanical adaptations induced. In Chapter 3 a study based on the observation of temporal features extracted from sEMG signals has been reported leading to the need of a more robust and reliable indicator during fatiguing tasks. Therefore, in Chapter 4, a novel bi-dimensional parameter is proposed. The study on sEMG-based indicators opened a scenario also on neurophysiological mechanisms underlying fatigue. For this purpose, in Chapter 5, a protocol designed for the analysis of motor unit-related parameters during prolonged fatiguing contractions is presented. In particular, two methodologies have been applied to multichannel sEMG recordings of isometric contractions of the Tibialis Anterior muscle: the state-of-the-art technique for sEMG decomposition and a coherence analysis on MU spike trains. The importance of a multi-scale approach has been finally highlighted in the context of the evaluation of cycling performance, where fatigue is one of the limiting factors. In particular, the last chapter of this thesis can be considered as a paradigm: physiological, metabolic, environmental, psychological and biomechanical factors influence the performance of a cyclist and only when all of these are kept together in a novel integrative way it is possible to derive a clear model and make correct assessments.

Obsessed With Work: A multi-causal and multi-rater approach to workaholism

Workaholism is defined as the combination of two underlying dimensions: working excessively and working compulsively. The present thesis aims at achieving the following purposes: 1) to test whether the interaction between environmental and personal antecedents may enhance workaholism; 2) to develop a questionnaire aimed to assess overwork climate in the workplace; 3) to contrast focal employees’ and coworkers’ perceptions of employees’ workaholism and engagement. Concerning the first purpose, the interaction between overwork climate and person characteristics (achievement motivation, perfectionism, conscientiousness, self-efficacy) was explored on a sample of 333 Dutch employees. The results of moderated regression analyses showed that the interaction between overwork climate and person characteristics is related to workaholism. The second purpose was pursued with two interrelated studies. In Study 1 the Overwork Climate Scale (OWCS) was developed and tested using a principal component analysis (N = 395) and a confirmatory factor analysis (N = 396). Two overwork climate dimensions were distinguished, overwork endorsement and lacking overwork rewards. In Study 2 the total sample (N = 791) was used to explore the association of overwork climate with two types of working hard: work engagement and workaholism. Lacking overwork rewards was negatively associated with engagement, whereas overwork endorsement showed a positive association with workaholism. Concerning the third purpose, using a sample of 73 dyads composed by focal employees and their coworkers, a multitrait-multimethod matrix and a correlated trait-correlated method model, i.e. the CT-C(M–1) model, were examined. Our results showed a considerable agreement between raters on focal employees' engagement and workaholism. In contrast, we observed a significant difference concerning the cognitive dimension of workaholism, working compulsively. Moreover, we provided further evidence for the discriminant validity between engagement and workaholism. Overall, workaholism appears as a negative work-related state that could be better explained by assuming a multi-causal and multi-rater approach.

Teoria dei giochi e Multi-criteria decision-making per reti mobili Ad-hoc: un protocollo di routing

Nell'elaborato si analizzano aspetti della teoria dei giochi e della multi-criteria decision-making. La riflessione serve a proporre le basi per un nuovo modello di protocollo di routing in ambito Mobile Ad-hoc Networks. Questo prototipo mira a generare una rete che riesca a gestirsi in maniera ottimale grazie ad un'acuta tecnica di clusterizzazione. Allo stesso tempo si propone come obiettivo il risparmio energetico e la partecipazione collaborativa di tutti i componenti.

Heterogeneous Multi-core Architectures for High Performance Computing

This thesis deals with heterogeneous architectures in standard workstations. Heterogeneous architectures represent an appealing alternative to traditional supercomputers because they are based on commodity components fabricated in large quantities. Hence their price-performance ratio is unparalleled in the world of high performance computing (HPC). In particular, different aspects related to the performance and consumption of heterogeneous architectures have been explored. The thesis initially focuses on an efficient implementation of a parallel application, where the execution time is dominated by an high number of floating point instructions. Then the thesis touches the central problem of efficient management of power peaks in heterogeneous computing systems. Finally it discusses a memory-bounded problem, where the execution time is dominated by the memory latency. Specifically, the following main contributions have been carried out: A novel framework for the design and analysis of solar field for Central Receiver Systems (CRS) has been developed. The implementation based on desktop workstation equipped with multiple Graphics Processing Units (GPUs) is motivated by the need to have an accurate and fast simulation environment for studying mirror imperfection and non-planar geometries. Secondly, a power-aware scheduling algorithm on heterogeneous CPU-GPU architectures, based on an efficient distribution of the computing workload to the resources, has been realized. The scheduler manages the resources of several computing nodes with a view to reducing the peak power. The two main contributions of this work follow: the approach reduces the supply cost due to high peak power whilst having negligible impact on the parallelism of computational nodes. from another point of view the developed model allows designer to increase the number of cores without increasing the capacity of the power supply unit. Finally, an implementation for efficient graph exploration on reconfigurable architectures is presented. The purpose is to accelerate graph exploration, reducing the number of random memory accesses.

Osservazioni radio di bl lacertae durante un episodio di variabilita multi-frequenza

L'oggetto astronomico BL Lacertae nel corso dell'anno 2012 ha mostrato un aumento di attività su più bande di emissione. Al radiotelescopio di Medicina si sono allora intensificate le osservazioni dell'oggetto durante un periodo che va da dicembre 2012 ad aprile 2013. Si sono analizzati i dati ricavati durante queste osservazioni per la frequenza di emissione radio di 8 GHz, allo scopo di ricavare la variabilità di BL Lacertae.

Un sensore multi-purpose: l'accelerometro

questa tesi propone una prospettiva completa sull'accelerometro, descrivendone le caratteristiche le tipologie, gli utilizzi che se ne possono fare e gli ambiti di applicazione. Sviluppa anche argomenti che riguardano interfacce e piattaforme per l'interazione con il sensore e algoritmi machine learning.

Valutazione della qualità delle immagini e della dose in multi-slice computed tomography per l'ottimizzazione dei protocolli clinici che impiegano sistemi di modulazione automatica

In questo studio ci siamo proposti di investigare i sistemi di modulazione automatica della dose sui sistemi TC Multislice (Automatic Exposure Control – AEC) da tre diversi produttori, aventi differenti indicatori di qualità delle immagini. Il presente lavoro è stato svolto presso il Servizio di Fisica Sanitaria dell’Azienda Ospedaliera Universitaria - Policlinico Sant’Orsola-Malpighi di Bologna e consiste in un’analisi quantitativa della dose impiegata durante esami di Tomografia Computerizzata Multi-Slice (TCMS) e delle rispettive immagini radiologiche. Le immagini sono state acquisite con : GE LightSpeed VCT 64 e GE LightSpeed 16 (AEC AutomA 3D longitudinale e angolare), Siemens Sensation 16 (AEC CARE Dose 4D combinato), Philips Brilliance 16 e iCT 64 (separati in AEC ZDOM longitudinale e AEC DDOM angolare). Le acquisizioni TCMS sono state effettuate a differenti kV e mA di riferimento, al fine di investigarne gli effetti sulla modulazione, impiegando algoritmi di ricostruzione standard presenti su ogni macchina. Due fantocci antropomorfi simulanti la zona del torace e dell’addome sono stati utilizzati per simulare un paziente standard posizionato come in un esame clinico di routine ; a questo proposito, sono stati impiegati protocolli elicoidali standard con e senza modulazione. Sono inoltre stati testati differenti valori di indice di qualità delle immagini. Il profilo dei mA lungo la lunghezza è stato ottenuto utilizzando ImageJ, un programma open source comunemente utilizzato per l’elaborazione di immagini; i mAs sono stati normalizzati ad un fattore che tiene conto delle differenti geometrie e delle filtrazioni dei diversi scanner tomografici analizzati nell’esperienza. Il rumore è stato valutato tramite la scelta di determinate ROI (Region Of Interest) localizzate in aree il più possibili uniformi disponibili lungo i fantocci. Abbiamo registrato che una variazione del Noise Index o dei mAs di riferimento a seconda della tipologia di macchina analizzata risulta in uno shift dei profili di dose; lo stesso si è verificato quando sono stati cambiato kV o mA nella scout di acquisizione. Sistemi AEC longitudinali e combinati hanno mostrato profili di mAs normalizzati simili tra loro, con valori elevati evidenziati nella zona delle spalle e zona pelvi; sono state osservate differenze del 30-40% tra i differenti scanner tomografici. Solo in un caso di macchina analizzata si è verificato un comportamento opposto rispetto alle altre due tipologie di macchina in esame. A dispetto della differente natura dei sistemi AEC, i risultati ottenuti dai protocolli combinati e longitudinali sono simili tra loro. Il rumore presente nelle immagini è aumentato ad un livello accettabile e la sua uniformità lungo la direzione di scan è migliorata.

Identity dynamics and the emergence of new organizational arrangements: A multi-level study

Organizational and institutional scholars have advocated the need to examine how processes originating at an individual level can change organizations or even create new organizational arrangements able to affect institutional dynamics (Chreim et al., 2007; Powell & Colyvas, 2008; Smets et al., 2012). Conversely, research on identity work has mainly investigated the different ways individuals can modify the boundaries of their work in actual occupations, thus paying particular attention to ‘internal’ self-crafting (e.g. Wrzesniewski & Dutton, 2001). Drawing from literatures on possible and alternative self and on positive organizational scholarship (e.g., Obodaru, 2012; Roberts & Dutton, 2009), my argument is that individuals’ identity work can go well beyond the boundaries of internal self-crafting to the creation of new organizational arrangements. In this contribution I analyze, through multiple case studies, healthcare professionals who spontaneously participated in the creation of new organizational arrangements, namely health structures called Community Hospitals. The contribution develops this form of identity work by building a grounded model. My findings disclose the process that leads from the search for the enactment of different self-concepts to positive identities, through the creation of a new organizational arrangement. I contend that this is a particularly complex form of collective identity work because it requires, to be successful, concerted actions of several internal, external and institutional actors, and it also requires balanced tensions that – at the same time - enable individuals’ aspirations and organizational equilibrium. I name this process organizational collective crafting. Moreover I inquire the role of context in supporting the triggering power of those unrealized selves. I contribute to the comprehension of the consequences of self-comparisons, organizational identity variance, and positive identity. The study bears important insights on how identity work originating from individuals can influence organizational outcomes and larger social systems.

A multi-objective genetic algorithm optimisation using variable speed pumps in water distribution systems

Due to its practical importance and inherent complexity, the optimisation of distribution networks for supplying drinking water has been the subject of extensive study for the past 30 years. The optimization is governed by sizing the pipes in the water distribution network (WDN) and / or optimises specific parts of the network such as pumps, tanks etc. or try to analyse and optimise the reliability of a WDN. In this thesis, the author has analysed two different WDNs (Anytown City and Cabrera city networks), trying to solve and optimise a multi-objective optimisation problem (MOOP). The main two objectives in both cases were the minimisation of Energy Cost (€) or Energy consumption (kWh), along with the total Number of pump switches (TNps) during a day. For this purpose, a decision support system generator for Multi-objective optimisation used. Its name is GANetXL and has been developed by the Center of Water System in the University of Exeter. GANetXL, works by calling the EPANET hydraulic solver, each time a hydraulic analysis has been fulfilled. The main algorithm used, was a second-generation algorithm for multi-objective optimisation called NSGA_II that gave us the Pareto fronts of each configuration. The first experiment that has been carried out was the network of Anytown city. It is a big network with a pump station of four fixed speed parallel pumps that are boosting the water dynamics. The main intervention was to change these pumps to new Variable speed driven pumps (VSDPs), by installing inverters capable to diverse their velocity during the day. Hence, it’s been achieved great Energy and cost savings along with minimisation in the number of pump switches. The results of the research are thoroughly illustrated in chapter 7, with comments and a variety of graphs and different configurations. The second experiment was about the network of Cabrera city. The smaller WDN had a unique FS pump in the system. The problem was the same as far as the optimisation process was concerned, thus, the minimisation of the energy consumption and in parallel the minimisation of TNps. The same optimisation tool has been used (GANetXL).The main scope was to carry out several and different experiments regarding a vast variety of configurations, using different pump (but this time keeping the FS mode), different tank levels, different pipe diameters and different emitters coefficient. All these different modes came up with a large number of results that were compared in the chapter 8. Concluding, it should be said that the optimisation of WDNs is a very interested field that has a vast space of options to deal with. This includes a large number of algorithms to choose from, different techniques and configurations to be made and different support system generators. The researcher has to be ready to “roam” between these choices, till a satisfactory result will convince him/her that has reached a good optimisation point.

Requirements definition and testing of the new version of multi-mission generic monitoring system (GEMS) v 4.4 for operations at Eumetsat

EUMETSAT (www.eumetsat.int) e’ l’agenzia europea per operazioni su satelliti per monitorare clima, meteo e ambiente terrestre. Dal centro operativo situato a Darmstadt (Germania), si controllano satelliti meteorologici su orbite geostazionarie e polari che raccolgono dati per l’osservazione dell’atmosfera, degli oceani e della superficie terrestre per un servizio continuo di 24/7. Un sistema di monitoraggio centralizzato per programmi diversi all’interno dell’ambiente operazionale di EUMETSAT, e’ dato da GEMS (Generic Event Monitoring System). Il software garantisce il controllo di diverse piattaforme, cross-monitoring di diverse sezioni operative, ed ha le caratteristiche per potere essere esteso a future missioni. L’attuale versione della GEMS MMI (Multi Media Interface), v. 3.6, utilizza standard Java Server Pages (JSP) e fa uso pesante di codici Java; utilizza inoltre files ASCII per filtri e display dei dati. Conseguenza diretta e’ ad esempio, il fatto che le informazioni non sono automaticamente aggiornate, ma hanno bisogno di ricaricare la pagina. Ulteriori inputs per una nuova versione della GEMS MMI vengono da diversi comportamenti anomali riportati durante l’uso quotidiano del software. La tesi si concentra sulla definizione di nuovi requisiti per una nuova versione della GEMS MMI (v. 4.4) da parte della divisione ingegneristica e di manutenzione di operazioni di EUMETSAT. Per le attivita’ di supporto, i test sono stati condotti presso Solenix. Il nuovo software permettera’ una migliore applicazione web, con tempi di risposta piu’ rapidi, aggiornamento delle informazioni automatico, utilizzo totale del database di GEMS e le capacita’ di filtri, insieme ad applicazioni per telefoni cellulari per il supporto delle attivita’ di reperibilita’. La nuova versione di GEMS avra’ una nuova Graphical User Interface (GUI) che utilizza tecnologie moderne. Per un ambiente di operazioni come e’ quello di EUMETSAT, dove l’affidabilita’ delle tecnologie e la longevita’ dell’approccio scelto sono di vitale importanza, non tutti gli attuali strumenti a disposizione sono adatti e hanno bisogno di essere migliorati. Allo stesso tempo, un’ interfaccia moderna, in termini di visual design, interattivita’ e funzionalita’, e’ importante per la nuova GEMS MMI.