Comportamento magnético de compósitos de matriz polimérica com adição de ferritas

Polymer matrix composites offer advantages for many applications due their combination of properties, which includes low density, high specific strength and modulus of elasticity and corrosion resistance. However, the application of non-destructive techniques using magnetic sensors for the evaluation these materials is not possible since the materials are non-magnetizable. Ferrites are materials with excellent magnetic properties, chemical stability and corrosion resistance. Due to these properties, these materials are promising for the development of polymer composites with magnetic properties. In this work, glass fiber / epoxy circular plates were produced with 10 wt% of cobalt or barium ferrite particles. The cobalt ferrite was synthesized by the Pechini method. The commercial barium ferrite was subjected to a milling process to study the effect of particle size on the magnetic properties of the material. The characterization of the ferrites was carried out by x-ray diffraction (XRD), field emission gun scanning electron microscopy (FEG-SEM) and vibrating sample magnetometry (VSM). Circular notches of 1, 5 and 10 mm diameter were introduced in the composite plates using a drill bit for the non-destructive evaluation by the technique of magnetic flux leakage (MFL). The results indicated that the magnetic signals measured in plates with barium ferrite without milling and cobalt ferrite showed good correlation with the presence of notches. The milling process for 12 h and 20 h did not contribute to improve the identification of smaller size notches (1 mm). However, the smaller particle size produced smoother magnetic curves, with fewer discontinuities and improved signal-to-noise ratio. In summary, the results suggest that the proposed approach has great potential for the detection of damage in polymer composites structures

Síntese e caracterização de ferrita ni-zn pelo método dos precursores poliméricos calcinada por energia de microondas

Magnetic ceramics have been widely investigated, especially with respect to intrinsic and extrinsic characteristics of these materials. Among the magnetic ceramic materials of technological interest, there are the ferrites. On the other hand, the thermal treatment of ceramic materials by microwave energy has offered various advantages such as: optimization of production processes, high heat control, low consumption of time and energy among others. In this work were synthesized powders of Ni-Zn ferrite with compositions Ni1- xZnxFe2O4 (0.25 ≤ x ≤ 0.75 mols) by the polymeric precursor route in two heat treatment conditions, conventional oven and microwave energy at 500, 650, 800 and 950°C and its structural, and morphological imaging. The materials were characterized by thermal analysis (TG/ DSC), X-ray diffraction (XRD), absorption spectroscopy in the infrared (FTIR), scanning electron microscopy (SEM), X-ray spectroscopy and energy dispersive (EDS) and vibrating sample magnetometry (VSM). The results of X-ray diffraction confirmed the formation of ferrite with spinel-type cubic structure. The extrinsic characteristics of the powders obtained by microwave calcination and influence significantly the magnetic behavior of ferrites, showing particles ferrimagnéticas characterized as soft magnetic materials (soft), is of great technological interest. The results obtained led the potential application of microwave energy for calcining powders of Ni-Zn ferrite

Relação entre ambiente familiar e capacidade funcional de idosos residentes no município de Jequié-BA

(Objective) Assess the functional capacity and determine the difference between the means of functional capacity (basic and instrumental activities of daily living) and the age groups of elderly residents in an outlying area in the hinterland of Bahia/Northeast of Brazil. (Methods) Analytical study with cross-sectional design and a sample of 150 elderly individuals enrolled in four Health Units in the municipality of Jequié, Bahia, Brazil. The instrument consisted of sociodemographic and health data, the Barthel Index and the Lawton scale. (Results) In all, 78.00% of the elderly were classified as dependent in the basic activities and 65.33% in the instrumental activities of daily living. Using the Kruskal- Wallis test, we found a statistically significant difference between the means of instrumental activities and the age groups (p= 0.011). (Conclusion) An elevated number of elderly were classified as dependent in terms of functional capacity and increased age is related to greater impairment in the execution of instrumental activities of daily living

Pré-concentração de cádmio com Saccharomyces cerevisiae e determinação em águas fluviais usando espectrometria de emissão óptica com plasma indutivamente acoplado

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Processo de desidratação da alga Gracilaria birdiae beneficiada em laboratório e artesanalmente: análise da atividade antioxidante e composição centesimal

The main aim of this study was to compare the procedure for dehydration of Gracilaria birdiae prepared handmade and laboratory, collected in the northern coast of Rio Grande do Norte. The sample was collected in the Rio do Fogo beach in march 2009. The sample collected followed by two processing, the first the material prepared in laboratory was air-dried at 50°C for 24 hours in air-flow oven. The second the handmade sample was air-dried on the sun during three days. The extract was prepared in three different solvents: ethanol, hydroethanol and water, resulting in ethanol, hidroethanol and aqueous extracts from handmade and laboratory sample. In according with results only the ethanol extract was fractionated yielding the fractions hexane, dichloromethane and ethyl acetate fractions. The different process to obtain Gracilaria birdiae resulted in the samples with different shades. The soluble solids content was higher in the laboratory sample. The chemical composition the both samples were characterized by presenting a considerable amounts of carbohydrates, with amior percentage protein and ash, respectively, in the handmade and laboratory sample. In two samples showed a low content of lipids and the lipid profile showed a higher proportion of monounsaturated fatty acids, with the absence polyunsaturated handmade sample. The phytochemical screening by chemical reactions showed the presence of flavonoids, tannins, alkaloids and saponins the laboratory sample, presenting a greater diversity of bioactive compounds. Through of the analysis by thin layer chromatography was possible to identify the phytosterols β-sitosterol and stigmasterol the both samples, also suggest the presence of β-carotene and chlorophyll α the laboratory sample. The levels of total phenolics and flavonoids were more significant in the ethanol extract of the laboratory sample. The in vitro lethality showed that extracts of the laboratory sample and handmade from 125 to 500 μg/ mL, respectively, were highly lethal. In the evaluation of antioxidant capacity by the system β-carotene/ácido linoleic method and by DPPH radical scavernging assay, the ethanol extract from the laboratory process showed significantly greater activity than the other extracts, being and the first and second methods, respectively, lower and equivalent to the synthetic antioxidant BHT. The handmade ethanol extract has not demonstrated skill in deactivating free radicals, but showed activity in inhibiting lipid peroxidation, although the values were significantly lower than the laboratory sample. We conclude that the dehydration process in the laboratory is the most efficient technique to maintenance of the chemical composition present in the seaweed, providing beneficial properties such as antioxidant capacity. We emphasize that this property can be explored with the objective of adding commercial value to the final product, which will promote the expansion of production of this seaweed in the community of Rio do Fogo

Determinação de parâmetros de qualidade para formas farmacêuticas homeopáticas

All medicine, whether allopathic or homeopathic, must go through strict quality control, which must ratify their characteristics throughout the period of validity. During the time of preparation and storage, solutions of the drugs are in permanent contact with packaging materials that can release undesirable substances to the solution. Several factors may influence the release of packing materials, and factorial design (FD) is a useful tool for analyzing the phenomenon. The aim of this study was the determination of quality parameters for Homeopathic solid (globules) and liquid (drops) dosage forms. It was carried out analysis in homeopathic globules for weight variation, mechanical strength, and moisture content uniformity. For liquid preparations, standard solutions were prepared from natural rubber bulbs, which were subjected to exhaustive extraction with two ethanol solutions (30 and 70%) in the ultrasonic bath for 20 minutes at 25°C and 50°C in three successive cycles. Studies of transfer have been made within five days, by spectrophotometric analysis in the UV region at 312 nm with λmáx and 323 nm for samples in 70% ethanol and 30% respectively. PH values were analyzed. We also conducted two FD studies, where the first, the three-level variables were solvent (chloroform, ethanol and nhexane), sample mass (30, 60 and 90mg), particle size (large disk, small disk and powder sample). In the second study, the solvent level variables were different ethanolic degrees (EtOH 30%, 70% and pure). The percentage of lending in the solutions was 5.5%, 12.4%, 24.2% and 41% of the total estimated in the reference solution. The values of rate constants of transfer were determined in the order of 0.0134 days-1 and 0.0232 days-1 in absorbance values, the solutions in ethanol at 30% and 70% respectively. These results suggest that the speed of transfer of materials from rubber is affected both by the nature of the vehicle as by the temperature

Toxicidade diferencial de produtos à base de abamectina ao ácaro Brevipalpus phoenicis (Geijskes, 1939) (Acari: Tenuipalpidae) em citros

O ácaro Brevipalpus phoenicis é uma das principais pragas dos citros por ser vetor do Citrus Leprosis Virus (CiLV), agente causal da leprose, uma das mais graves doenças da citricultura. Objetivou-se avaliar o efeito tóxico de produtos à base de abamectina sobre o ácaro B. phoenicis. Foram realizados um experimento de ação direta e três de ação residual no Laboratório de Acarologia do Departamento de Proteção de Plantas (Fitossanidade) da FCAV - UNESP, Jaboticabal-SP. O delineamento adotado nos bioensaios foi o inteiramente casualizado, onde 10 tratamentos foram repetidos 7 vezes, sendo cada repetição composta por um fruto de laranja. Os tratamentos estudados (mL p.c./100 L de água) foram: Acaramik a 20; 30; 40 e 50 mL; Vertimec a 30 e 40 mL; Abamectin Nortox a 30 e 40 mL; Tricofol a 77 mL e uma testemunha sem aplicação. Utilizaram-se frutos com presença de verrugose, que foram lavados e parcialmente parafinados, deixando-se uma área sem parafina, que foi circundada com cola entomológica para contenção dos ácaros. Transferiram-se 20 ácaros adultos B. phoenicis para cada fruto. No bioensaio de ação direta, a transferência foi realizada antes das aplicações e, nos bioensaios de ação residual, aos 5; 10 e 15 dias após a aplicação dos produtos. A aplicação dos produtos sobre os frutos foi realizada em Torre de Potter. Os resultados obtidos nos bioensaios evidenciaram que os melhores tratamentos foram: Tricofol a 77 mL, Acaramik a 40 e 50 mL e Vertimec a 40 mL. de forma geral, os produtos testados podem ser utilizados no controle do ácaro B. phoenicis.

Monitoramento de raças de Bremia lactucae em 2010 e 2011 no Estado de São Paulo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Amostragem foliar da bananeira 'Prata-Anã

Para diagnose nutricional da bananeira, é necessário padronizar a amostragem do tecido a ser utilizado, já que a composição mineral varia com a idade da planta, com a folha amostrada, entre as diversas partes da folha, ao que se somam as condições ecológicas, diferenças varietais e flutuações sazonais dos elementos. Portanto, a possibilidade de equívoco na interpretação é considerável. O Método de Amostragem Internacional de Referência (MEIR) para bananeira recomenda coletar a terceira folha de plantas com cachos que apresentem todas as pencas visíveis e não mais que três mãos de flores masculinas abertas, retirando-se a metade interna de uma faixa central do limbo, desprovida da nervura central. Há uma dificuldade em seguir tal recomendação para bananeira 'Prata-Anã' cultivada no norte de Minas Gerais, pois ela possui porte alto e roseta foliar muito densa, que confunde a localização da folha amostrada. Além disso, normalmente, as amostras são retiradas com largura diferente dos 10 cm recomendados. Dadas as dificuldades de amostragem da bananeira 'Prata-Anã' e o fato de besta cultivar sob irrigação ser pouco estudada, comparada àquelas do subgrupo Cavendish, o presente trabalho objetivou determinar o efeito da folha amostrada e da largura da amostra sobre os teores minerais de bananeira 'Prata-Anã' cultivada sob irrigação no norte de Minas Gerais. Apesar das variações estatísticas, os teores foliares mantiveram-se dentro da faixa de suficiência, independentemente da posição da folha amostra da- 2ª, 3ª ou 4ª folha - ou do tamanho da amostra - 10; 20 ou 30 cm de largura. Isto sugere que a coleta de folha na posição acima (segunda) ou abaixo (quarta) da folha recomendada terceira, numa largura foliar de 10 a 30 cm, pouco altera os teores foliares em relação à indicação pelo método MEIR, tolerando-se assim uma possível variação da amostra quanto à posição e à largura foliar testadas.

Dimensionamento do número de amostras para avaliação da fertilidade do solo

The determination of the amount of sample units that will compose the sample express the optimization of the workforce, and reduce errors inherent in the report of recommendation and evaluation of soil fertility. This study aimed to determine in three systems use and soil management, the numbers of units samples design, needed to form the composed sample, for evaluation of soil fertility. It was concluded that the number of sample units needed to compose the composed sample to determination the attributes of organic matter, pH, P, K, Ca, Mg, Al and H+Al and base saturation of soil vary by use and soil management and error acceptable to the mean estimate. For the same depth of collected, increasing the number of sample units, reduced the percentage error in estimating the average, allowing the recommendation of 14, 14 and 11 sample in management with native vegetation, pasture cultivation and corn, respectively, for a error 20% on the mean estimate.

Elucidating the Evolution of the Red Brocket Deer Mazama americana Complex (Artiodactyla; Cervidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento de sistemas micro e nanoestruturados de quitosana/MDI para aplicações cosméticas

Currently, studies in the area of polymeric microcapsules and nanocapsules and controlled release are considerably advanced. This work aims the study and development of microcapsules and nanocapsules from Chitosan/MDI, using a new technique of interfacial polycondensation combined to spontaneous emulsification, for encapsulation of BZ-3. It was firstly elaborated an experimental design of 23 of the particle in white without the presence of BZ-3 and Miglyol, where the variables were the concentrations of MDI, chitosan and solvent. Starting from the data supplied by the experimental design was chosen the experiment with smaller particle diameter and only added like this BZ-3 and Miglyol. The suspension containing concentrations of 6.25 mg/mL, 12.5 mg/mL, 18.75 mg/mL, 25 mg/mL of BZ-3 were prepared, nevertheless, during the storage time, these formulations presented drug precipitates in the suspensions of 18.75 mg/mL and 25 mg/mL of BZ-3. This apparition of precipitate was attributed to the diffusion of BZ-3 for the aqueous phase without any encapsulation, suggesting so the use of the smaller concentrations of the BZ-3. The suspension containing 6.25mg/mL of BZ3 presented average size of 1.47μm, zeta potential of 61 mV, pH 5.64 and this sample showed an amount of BZ-3 and drug entrapment of 100 %. The suspension containing 12.5mg/mL of BZ-3 presented average size of 1.76μm, zeta potential of 47.4 mV, pH 5.71 and this sample showed an amount of BZ-3 and drug entrapment of 100 %. Then, showing such important characteristics, these two formulations were chosen for futher continuity to the study. These formulations were also characterized by the morphology, FTIR, stability for Turbiscan, DSC and a study of controlled release of the BZ-3 was elaborated in different receiving means

Reproducibility of 6-minute walking test in patients with COPD

The reproducibility of the 6-min walking test (6MWT) needs to be more solidly studied. This study aimed to investigate the reproducibility of two 6MWTs performed on subsequent days in a large and representative sample of patients with chronic obstructive pulmonary disease (COPD), and to quantify the learning effect between the two tests, as well as its determinants.In a retrospective observational study, 1,514 patients with COPD performed two 6MWTs on subsequent days. Other measurements included body composition (dual X-ray absorptiometry), dyspnoea (Medical Research Council scale) and comorbidity (Charlson index).Although the 6MWT was reproducible (intraclass correlation coefficient=0.93), patients walked farther in the second test (391 m, 95% CI 155-585 m versus 418 m, 95% CI 185-605 m; p < 0.0001). on average, the second 6MWT increased by 27 m (or 7%), and 82% of patients improved in the second test. Determinants of improvement >= 42 m in the second test (upper limit of the clinically important change) were as follows: first 6MWT < 350 m, Charlson index < 2 and body mass index < 30 kg.m(-2) (OR 2.49, 0.76 and 0.60, respectively).The 6MWT was statistically reproducible in a representative sample of patients with COPD. However, the vast majority of patients improved significantly in the second test by an average learning effect of 27 m.

O lugar no espaço: de Martin Heidegger para Eduardo Chillida

In preparing the book Art and Space - originally titled Die Kunst und der Raum (1969) - together with the work of Eduardo Chillida, and devote the text written to the sculptor, Heidegger seems to see in the works of Chillida some of his key themes rescued and reunited. This fusion of content and thought was revealed in his dialogue, at another moment, with the poetry of Friedrich Hölderlin. This dissertation aims to present some of the fundamental concepts in Heidegger's work, especially space, place and art; as well as explain the dialogue between these concepts and the works and thoughts of the sculptor Eduardo Chillida. Amongst the main points of this convergence of thought between the philosopher and the sculptor, we can find: the definition of art; the relationship of world and earth; the thinking about the place of art nowadays; and the meanings of interspace, to incorporate and make the space positive

Caracterização magnética e estrutural de filmes depositados por gaiola catódica

Iron nitrite films, with hundred of nanometers thick, were deposited using the Cathodic cage plasma nitriding method, with a N2/H2 plasma, over a common glass substract. The structure, surface morphology and magnetic properties were investigated using X-ray diffractometry (XRD), atomic force microscopy (AFM) and vibrating sample magnetometer (VSM). XRD shows the formation of γ FeN phase and a combination of ζFe2N + ɛFe3N phases. The film s saturation magnetization and coercivity depends on morphology, composition, grain size and treatment temperature. Temperature raising from 250 ºC to 350 ºC were followed by an increase in saturation magnetization and film s surface coercivity on the parallel direction in relative proportion. This fact can be attributed to the grain sizes and to the different phases formed, since iron rich fases, like the ɛFe3N phase, emerges more frequently on more elevated treatment s temperature. Using this new and reasonably low cost method, it was possible to deposit films with both good adhesion and good magnetic properties, with wide application in magnetic devices