Prognosis of underground structures deterioration based on in-situ measurements

The stability of the underground structure is very important not only from the point of view of the structure itself, but also from the point of view of other structures. Therefore, the evaluation of the process of deterioration can help us very much. In the first part of the paper the ageing of the structures in the scope of their life cycle will be described. The whole process of deterioration is important but limited to certain time intervals and is able to give signals about changes in macro-scale. The second part of the paper is focused on the adaptation of new methods: micro technology of monitoring - such as MEMS (Micro Electrical Mechanical Systems) and wireless technologies for data transfer. It is obvious that such new technologies have to be assessed for the ability to deliver data continuously and for their safety and solidity. At the end of the paper the application of the measurements on the Prague metro's lining is mentioned. © 2007 Taylor & Francis Group.

Laminar to turbulent flow transition measurements using an array of SOI-CMOS MEMS wall shear stress sensors

The successful utilization of an array of silicon on insulator complementary metal oxide semiconductor (SOICMOS) micro thermal shear stress sensors for flow measurements at macro-scale is demonstrated. The sensors use CMOS aluminum metallization as the sensing material and are embedded in low thermal conductivity silicon oxide membranes. They have been fabricated using a commercial 1 μm SOI-CMOS process and a post-CMOS DRIE back etch. The sensors with two different sizes were evaluated. The small sensors (18.5 ×18.5 μm2 sensing area on 266 × 266 μm2 oxide membrane) have an ultra low power (100 °C temperature rise at 6mW) and a small time constant of only 5.46 μs which corresponds to a cut-off frequency of 122 kHz. The large sensors (130 × 130 μm2 sensing area on 500 × 500 μm2 membrane) have a time constant of 9.82 μs (cut-off frequency of 67.9 kHz). The sensors' performance has proven to be robust under transonic and supersonic flow conditions. Also, they have successfully identified laminar, separated, transitional and turbulent boundary layers in a low speed flow. © 2008 IEEE.

Characterization of nano-composite M-2411/Y-123 thin films by electron backscatter diffraction and in-field critical current measurements

Thin films of nano-composite Y-Ba-Cu-O (YBCO) superconductors containing nano-sized, non-superconducting particles of Y2Ba 4CuMOx (M-2411 with M = Ag and Nb) have been prepared by the PLD technique. Electron backscatter diffraction (EBSD) has been used to analyze the crystallographic orientation of nano-particles embedded in the film microstructure. The superconducting YBa2Cu3O7 (Y-123) phase matrix is textured with a dominant (001) orientation for all samples, whereas the M-2411 phase exhibits a random orientation. Angular critical current measurements at various temperature (T) and applied magnetic field (B) have been performed on thin films containing different concentration of the M-2411 second phase. An increase in critical current density J c at T < 77 K and B < 6 T is observed for samples with low concentration of the second phase (2 mol % M-2411). Films containing 5 mol % Ag-2411 exhibit lower Jc than pure Y-123 thin films at all fields and temperatures. Samples with 5 mol % Nb-2411 show higher Jc(B) than phase pure Y-123 thin films for T < 77 K. © 2010 IOP Publishing Ltd.

Morphometric characteristics and meristic traits of Tilapia zillii from three major dams of a southwestern state, Nigeria

Tilapia zillii was examined in three major dams in Ekiti State, Nigeria (Ureje dam, Ado, Egbe dam and Ero dam) for their morphometric characteristics and meristic traits. The results showed that the average body weight of the fish sampled were 145.86±50.06g in Ado, 30.19±9.35g in Egbe and 40.58±52.30g in Ero dam. Average total lengths were 21.29±3.20cm, 12.32±1.74cm and 11.24±1.56cm for Ado, Egbe and Ero dam respectively. The relationship between average weight and length of T. zillii showed that Y=15.202X-179.33 (R2=0.7181), Y=4.40049±-24.075 (R2=0.6708) and Y=2.6676X10.596 (R2=0.0063) for Ado, Egbe and Ero dam respectively. The results on headlength, total length, body weight and standard length and pre-pelvic distance are significantly different at 95% among the T.zillii of the three dams. There was no significant difference in the meristic traits of the T. zillii of the three dams. The population size of T.zillii in the three dams was just too small compared to other species of fish hence the need to assess the stock of fish in these dams critically for the encouragement of proper fishing activities in these dams.

Geometrical properties and turbulent flame speed measurements in stationary premixed V-flames using direct numerical simulation

Three dimensional, fully compressible direct numerical simulations (DNS) of premixed turbulent flames are carried out in a V-flame configuration. The governing equations and the numerical implementation are described in detail, including modifications made to the Navier-Stokes Characteristic Boundary Conditions (NSCBC) to accommodate the steep transverse velocity and composition gradients generated when the flame crosses the boundary. Three cases, at turbulence intensities, u′/sL, of 1, 2, and 6 are considered. The influence of the flame holder on downstream flame properties is assessed through the distributions of the surface-conditioned displacement speed, curvature and tangential strain rates, and compared to data from similarly processed planar flames. The distributions are found to be indistinguishable from planar flames for distances greater than about 17δth downstream of the flame holder, where δth is the laminar flame thermal thickness. Favre mean fields are constructed, and the growth of the mean flame brush is found to be well described by simple Taylor type diffusion. The turbulent flame speed, sT is evaluated from an expression describing the propagation speed of an isosurface of the mean reaction progress variable c̃ in terms of the imbalance between the mean reactive, diffusive, and turbulent fluxes within the flame brush. The results are compared to the consumption speed, sC, calculated from the integral of the mean reaction rate, and to the predictions of a recently developed flame speed model (Kolla et al., Combust Sci Technol 181(3):518-535, 2009). The model predictions are improved in all cases by including the effects of mean molecular diffusion, and the overall agreement is good for the higher turbulence intensity cases once the tangential convective flux of c̃ is taken into account. © 2010 Springer Science+Business Media B.V.

Phylogeny and biogeography of the Petaurista philippensis complex (Rodentia : Sciuridae), inter- and intraspecific relationships inferred from molecular and morphometric analysis

With modified DNA extraction and Purification protocols, the complete cytochrome b gene sequences (1140 bp) were determined from degraded museum specimens. Molecular analysis and morphological examination of cranial characteristics of the giant flying squirrels of Petaurista philippensis complex (P. grandis, P. hainana, and P. yunanensis) and other Petaurista species yielded new insights into long-standing controversies in the Petaurista systematics. Patterns of genetic variations and morphological differences observed in this study indicate that P. hainana, P. albiventer, and P. yunanensis can be recognized as distinct species, and P. grandis and P. petaurista are conspecific populations. Phylogenetic relationships reconstructed by using parsimony, likelihood, and Bayesian methods reveal that, with P. leucogenys as the basal branch, all Petaurista groups formed two distinct clades. Petaurista philippensis, P. hainana, P. yunanensis, and P. albiventer are clustered in the same clade, while P. grandis shows a close relationship to P. petaurista. Deduced divergence times based on Bayesian analysis and the transversional substitution at the third codon suggest that the retreating of glaciers and upheavals or movements of tectonic plates in the Pliocene-Pleistocene were the major factors responsible for the present geographical distributions of Petaurista groups. (c) 2005 Elsevier Inc. All rights reserved.

Determination of biological characteristics and blood groups of hilsa shad (Tenualosa ilisha) in the north of Persian Gulf (Bushehr coastal waters)

Hilsa shad, Tenuolosa ilisha, belongs to Clupeidae family and Alsinae subfamily is an euryhaline pelagic and anadromous species living in marine and freshwater waters. Regarding to study the biological characteristics of this species, this study was carried out in the Northern Persian Gulf within Bushehr province waters during years 2006-7. A total of 344 specimens were collected and transported to the laboratory for further different biological measurements consist of: reproduction (GSI, fecundity, maturity stages), feeding (stomach contents, food preference ...), aging; 58 morphometric and ٧ meristic measurements. The results indicate that minimum, maximum and mean body weight are 203, 953 and 481.35±147.64 g, respectively and this values for total length are 26.5, 45.1 and 35.99±3.98 cm. For food regimes, the most abundant phytoplankton foods belong to Bacillariophyta (83.74٪) and zooplanktons of Arthropoda (51٪). The mean RLG was measured about 1.53±0.22 and the mean feeding intensity was about 51.79±38.13. Also, the aging of studied fishes showed that they have 2 to 4 years and most of the samples had 2+ years. The reproduction studies showed that Indian shad is a batch spawner species. The average gonadosomatic index (GSI) is 1.64±1.382 and the main spawning season was determined for April-May.

Morphometric and meristic studies of the spotted estuarine prawn, Macrobrachium equidens (Dana) of Vembanad Lake, Kerala State

The paper reports on the statistical analysis of growth pattern and meristic studies of body parts of the spotted estuarine prawn, Macrobrachium equidens (Dana) of Vembanad Lake, Kerala State. The results showed that the growth pattern of carapace length, telson length, ischium length and dactylus length in relation to total length were significantly different between the sexes at slope itself (at 1% level) and growth pattern of abdominal length, merus length, carpus length, propodus length and palm length were significant at elevations (5%, 1% levels). The average sizes of all these characters were greater in males than in females. Regression equations have been calculated for the characters and presented in the text. Among the characters of the carapace, rostrum length, post-orbital length showed significant difference between sexes at 1% level (slope value) and width of carapace at 1% level (elevations). The average sizes of all these characters were higher in males. Among the meristic characters studied, the species exhibited sexual dimorphism with regard to dorsal teeth, post-orbital teeth and ventral teeth. The fundamental data generated is essential for establishing the species status as well as it is useful for making comparison with other species.