Finite element modeling of the cement-bone interface beneath the tibial tray of a total knee arthroplasty: Study of the stress shielding effect (modellazione agli elementi finiti dell'interfaccia cemento-osso sotto il piatto tibiale di protesi totale di ginocchio: Analisi dello stress shielding)

The goal of this thesis was the study of the cement-bone interface in the tibial component of a cemented total knee prosthesis. One of the things you can see in specimens after in vivo service is that resorption of bone occurs in the interdigitated region between bone and cement. A stress shielding effect was investigated as a cause to explain bone resorption. Stress shielding occurs when bone is loaded less than physiological and therefore it starts remodeling according to the new loading conditions. µCT images were used to obtain 3D models of the bone and cement structure and a Finite Element Analysis was used to simulate different kind of loads. Resorption was also simulated by performing erosion operations in the interdigitated bone region. Finally, 4 models were simulated: bone (trabecular), bone with cement, and two models of bone with cement after progressive erosions of the bone. Compression, tension and shear test were simulated for each model in displacement-control until 2% of strain. The results show how the principal strain and Von Mises stress decrease after adding the cement on the structure and after the erosion operations. These results show that a stress shielding effect does occur and rises after resorption starts.

Les conflits et les rapports de force dans la langue. Le dominant et le domine dans le domaine scolaire

La standardisation de la langue française a inévitablement eu des conséquences soit dans l’attitude de défense du français, soit dans l’inquiétude de ceux qui parlent une autre langue. Cette étude veut établir une comparaison entre le rapport langue du pouvoir/langues non officielles et le rapport professeur/élève en milieu scolaire. La distinction entre langue officielle et dites « langues minoritaires » sera mis en relation avec la langue des jeunes, qui, à l’école, se confrontent et entrent en collision avec la langue de leur professeur. En effet, les classes hétérogènes et l’influence de la langue maternelle auprès des élèves, fils d’immigrés, exposent les enseignants à toute une série de difficultés liées aux différences culturelles. Les dénonciations et les cas de violence dans les écoles mettront l’accent également sur l’opinion publique et sur le type de mesures mises en relief par les Institutions publiques. L’aire géographique prise en considération inclut Paris et ses environs même si quelques exemples d’enquêtes menées dans d’autres parties de la France et à l’étranger seront cités.

Studio e progettazione di giunti incollati di tipo strutturale per applicazioni aeronautiche

Il presente elaborato è stato approfondito e sviluppato presso lo stabilimento della Blackshape Aircraft S.p.A. sito in Monopoli (Bari). L’obiettivo è stato principalmente orientato sull’individuazione di un metodo di progettazione di giunzioni incollate fra laminati in CFRP basato su di un modello matematico in grado di prevederne la resistenza. Per realizzare tale studio sono stati necessari approfondimenti preliminari relativi al comportamento meccanico dei laminati in materiale composito e agli studi condotti da Hart-Smith sulla teoria degli incollaggi. E’ stato determinato un metodo analitico per il calcolo della lunghezza di sovrapposizione degli aderenti. Il criterio di resistenza del giunto individuato, basato sulla teoria del cedimento multiassiale di Von Mises, è stato approvato dalla Agenzia Europea per la Sicurezza Aerea, EASA. A livello numerico-pratico è stato preso in esempio il giunto fra i gusci di fusoliera relativi al nuovo velivolo Blackshape con certificazione VLA (Very Light Aircraft).

Numerical assessment on the effective mechanical stimuli for matrix-associated metabolism in chondrocyte-seeded constructs

The self-regeneration capacity of articular cartilage is limited, due to its avascular and aneural nature. Loaded explants and cell cultures demonstrated that chondrocyte metabolism can be regulated via physiologic loading. However, the explicit ranges of mechanical stimuli that correspond to favourable metabolic response associated with extracellular matrix (ECM) synthesis are elusive. Unsystematic protocols lacking this knowledge produce inconsistent results. This study aims to determine the intrinsic ranges of physical stimuli that increase ECM synthesis and simultaneously inhibit nitric oxide (NO) production in chondrocyte-agarose constructs, by numerically re-evaluating the experiments performed by Tsuang et al. (2008). Twelve loading patterns were simulated with poro-elastic finite element models in ABAQUS. Pressure on solid matrix, von Mises stress, maximum principle stress and pore pressure were selected as intrinsic mechanical stimuli. Their development rates and magnitudes at the steady state of cyclic loading were calculated with MATLAB at the construct level. Concurrent increase in glycosaminoglycan and collagen was observed at 2300 Pa pressure and 40 Pa/s pressure rate. Between 0-1500 Pa and 0-40 Pa/s, NO production was consistently positive with respect to controls, whereas ECM synthesis was negative in the same range. A linear correlation was found between pressure rate and NO production (R = 0.77). Stress states identified in this study are generic and could be used to develop predictive algorithms for matrix production in agarose-chondrocyte constructs of arbitrary shape, size and agarose concentration. They could also be helpful to increase the efficacy of loading protocols for avascular tissue engineering. Copyright (c) 2010 John Wiley \& Sons, Ltd.

Stress and Strain Adaptation in Load-Dependent Remodeling of the Embryonic Left Ventricle

Altered pressure in the developing left ventricle (LV) results in altered morphology and tissue material properties. Mechanical stress and strain may play a role in the regulating process. This study showed that confocal microscopy, three-dimensional reconstruction, and finite element analysis can provide a detailed model of stress and strain in the trabeculated embryonic heart. The method was used to test the hypothesis that end-diastolic strains are normalized after altered loading of the LV during the stages of trabecular compaction and chamber formation. Stage-29 chick LVs subjected to pressure overload and underload at stage 21 were reconstructed with full trabecular morphology from confocal images and analyzed with finite element techniques. Measured material properties and intraventricular pressures were specified in the models. The results show volume-weighted end-diastolic von Mises stress and strain averaging 50–82% higher in the trabecular tissue than in the compact wall. The volume-weighted-average stresses for the entire LV were 115, 64, and 147Pa in control, underloaded, and overloaded models, while strains were 11, 7, and 4%; thus, neither was normalized in a volume-weighted sense. Localized epicardial strains at mid-longitudinal level were similar among the three groups and to strains measured from high-resolution ultrasound images. Sensitivity analysis showed changes in material properties are more significant than changes in geometry in the overloaded strain adaptation, although resulting stress was similar in both types of adaptation. These results emphasize the importance of appropriate metrics and the role of trabecular tissue in evaluating the evolution of stress and strain in relation to pressure-induced adaptation.

Dimorphism in Shell Shape and Strength in Two Species of Emydid Turtle

This study investigates the mechanical implications of shell shape differences between males and females of two North American turtle species: Chrysemys picta and Glyptemys insculpta. These species show patterns of sexual dimorphism that are common to many species of turtle. Females have wider and more highly domed shells, whereas males tend to have flatter, more streamlined shells. In addition, the males of many terrestrial species have concave plastra, most likely to accommodate the domed shells of the females while mating. The purpose of this study was to determine whether the known morphological differences in male and female turtle shells are also associated with differences in shell strength. Landmark coordinate data were collected from the shells of males and females of both species. These data were used to create digital models of each shell for finite-element (FE) analysis. FE models were generated by transforming a single base model of a turtle shell to match the shapes of each specimen examined in this study. All models were assigned the same material properties and restraints. Twelve load cases, each representing a predator’s bite at a different location on the carapace, were applied separately to the models. Subsequently, Von Mises stresses were extracted for each element of each model. Overall, the shells of females of both species exhibited significantly lower maximum and average stresses for a given load than those of their male counterparts. Male G. insculpta exhibited significant increases in stresses because of the concave shape of their plastra. We suggest that the mechanical implications of shell shape differences between males and females may have a large impact on many aspects of the biology of these turtle species.

L’industrie cinématographique du Cameroun : évaluation et perspectives

L’industrie cinématographique africaine d’aujourd’hui connaît de grandes avancées dans de nombreux pays d’Afrique. Seulement, autant certains pays africains connaissent de grandes avancées, autant d’autres pays voient leur industrie cinématographique traîner le pas. Le Cameroun est un exemple qui illustre à souhait ces pays qui sont à la traîne. Deux constats s’imposent à nous dans ce cas d’espèce. D’un côté, le Ministère de la Culture semble s’essouffler par le rôle qui lui incombe. De ce fait, il est de moins en moins actif et très peu représenté sur le terrain. De l’autre côté, nous observons çà et là de multiples activités. Des festivals, de long et court métrages organisés par des camerounais, ainsi que des rencontres cinématographiques mises sur pied en partenariat avec les représentations culturelles de pays étrangers en présence sur le territoire. Ces initiatives diverses malgré l’atmosphère peu favorable du pays parviennent à impulser une certaine dynamique. Notons tout de même que ces actions restent cantonnées dans les deux principales villes que sont Yaoundé et Douala. Après ce bref aperçu du tableau cinématographique camerounais, deux questions s’imposent à nous : Quelle appréciation peut-on faire du cinéma au Cameroun aujourd’hui ? Quel avenir pour celui-ci ? Telles sont les deux préoccupations auxquelles nous essaierons d’apporter quelques éléments de réponses dans cette étude. // Mots clés : cinéma, Cameroun, bilan, perspectives, initiatives, industrie cinématographique.

The effects of impingement and dysplasia on stress distributions in the hip joint during sitting and walking: a finite element analysis

Soft tissue damage has been observed in hip joints with pathological geometries. Our primary goal was to study the relationship between morphological variations of the bony components of the hip and resultant stresses within the soft tissues of the joint during routine daily activities. The secondary goal was to find the range of morphological parameters in which stresses are minimized. Computational models of normal and pathological joints were developed based on variations of morphological parameters of the femoral head (Alpha angle) and acetabulum (CE angle). The Alpha angle was varied between 40 degrees (normal joint) and 80 degrees (cam joint). The CE angle was varied between 0 degrees (dysplastic joint) and 40 degrees (pincer joint). Dynamic loads and motions for walking and standing to sitting were applied to all joint configurations. Contact pressures and stresses were calculated and crosscompared to evaluate the influence of morphology. The stresses in the soft tissues depended strongly on the head and acetabular geometry. For the dysplastic joint, walking produced high acetabular rim stresses. Conversely, for impinging joints, standing-to-sitting activities that involved extensive motion were critical, inducing excessive distortion and shearing of the tissue-bone interface. Zones with high von Mises stresses corresponded with clinically observed damage zones in the acetabular cartilage and labrum. Hip joint morphological parameters that minimized were 20 degrees

A generalized anisotropic quadric yield criterion and its application to bone tissue at multiple length scales

Nonlinear computational analysis of materials showing elasto-plasticity or damage relies on knowledge of their yield behavior and strengths under complex stress states. In this work, a generalized anisotropic quadric yield criterion is proposed that is homogeneous of degree one and takes a convex quadric shape with a smooth transition from ellipsoidal to cylindrical or conical surfaces. If in the case of material identification, the shape of the yield function is not known a priori, a minimization using the quadric criterion will result in the optimal shape among the convex quadrics. The convexity limits of the criterion and the transition points between the different shapes are identified. Several special cases of the criterion for distinct material symmetries such as isotropy, cubic symmetry, fabric-based orthotropy and general orthotropy are presented and discussed. The generality of the formulation is demonstrated by showing its degeneration to several classical yield surfaces like the von Mises, Drucker–Prager, Tsai–Wu, Liu, generalized Hill and classical Hill criteria under appropriate conditions. Applicability of the formulation for micromechanical analyses was shown by transformation of a criterion for porous cohesive-frictional materials by Maghous et al. In order to demonstrate the advantages of the generalized formulation, bone is chosen as an example material, since it features yield envelopes with different shapes depending on the considered length scale. A fabric- and density-based quadric criterion for the description of homogenized material behavior of trabecular bone is identified from uniaxial, multiaxial and torsional experimental data. Also, a fabric- and density-based Tsai–Wu yield criterion for homogenized trabecular bone from in silico data is converted to an equivalent quadric criterion by introduction of a transformation of the interaction parameters. Finally, a quadric yield criterion for lamellar bone at the microscale is identified from a nanoindentation study reported in the literature, thus demonstrating the applicability of the generalized formulation to the description of the yield envelope of bone at multiple length scales.

Comparison of theoretical fixation stability of three devices employed in medial opening wedge high tibial osteotomy: a finite element analysis.

BACKGROUND Medial open wedge high tibial osteotomy is a well-established procedure for the treatment of unicompartmental osteoarthritis and symptomatic varus malalignment. We hypothesized that different fixation devices generate different fixation stability profiles for the various wedge sizes in a finite element (FE) analysis. METHODS Four types of fixation were compared: 1) first and 2) second generation Puddu plates, and 3) TomoFix plate with and 4) without bone graft. Cortical and cancellous bone was modelled and five different opening wedge sizes were studied for each model. Outcome measures included: 1) stresses in bone, 2) relative displacement of the proximal and distal tibial fragments, 3) stresses in the plates, 4) stresses on the upper and lower screw surfaces in the screw channels. RESULTS The highest load for all fixation types occurred in the plate axis. For the vast majority of the wedge sizes and fixation types the shear stress (von Mises stress) was dominating in the bone independent of fixation type. The relative displacements of the tibial fragments were low (in μm range). With an increasing wedge size this displacement tended to increase for both Puddu plates and the TomoFix plate with bone graft. For the TomoFix plate without bone graft a rather opposite trend was observed.For all fixation types the occurring stresses at the screw-bone contact areas pulled at the screws and exceeded the allowable threshold of 1.2 MPa for at least one screw surface. Of the six screw surfaces that were studied, the TomoFix plate with bone graft showed a stress excess of one out of twelve and without bone graft, five out of twelve. With the Puddu plates, an excess stress occurred in the majority of screw surfaces. CONCLUSIONS The different fixation devices generate different fixation stability profiles for different opening wedge sizes. Based on the computational simulations, none of the studied osteosynthesis fixation types warranted an intransigent full weight bearing per se. The highest fixation stability was observed for the TomoFix plates and the lowest for the first generation Puddu plate. These findings were revealed in theoretical models and need to be validated in controlled clinical settings.

Une personne de confiance pour vivre mieux

Les relations sociales font partie des déterminants clés du bien-être et de la santé de chacune et de chacun, indépendamment de l’âge, du genre ou de la culture. Il est démontré que les personnes qui disposent d’un réseau social solide et vivent dans le cadre d’une relation stable sont en meilleure santé physique et mentale. Elles sont mieux intégrées que les personnes qui vivent seules et qui n’ont pas de proches de confiance autour d’elles. Or, au fil des dernières décennies, vivre seul est devenu l’un des modes d’existence les plus répandus dans notre société. Les dernières tendances mises en lumière par l’Office fédéral de la statistique démontrent que plus de la moitié de la population suisse est célibataire, divorcée, en situation de veuvage ou sans relation fixe. Les ménages composés d’une seule personne sont ainsi les plus nombreux en Suisse.

Etat des lieux des politiques de l'enseignement religieux en Suisse latine. Réformes institutionnelles et schémas interprétatifs

Depuis vingt ans, dans plusieurs cantons suisses, les cadres de l’enseignement religieux à l’école publique ont subi de profondes transformations. Cet ouvrage attire l’attention sur la dimension politique et sociale de cet enseignement, à travers lequel se joue le rôle de la religion dans la société contemporaine. Il discute les nouvelles structures mises en place par les réformes récentes, ainsi que les schémas interprétatifs chargés de les légitimer, et contribue ainsi à une réflexion élargie sur la présence de la religion dans la sphère publique.

Protrusio acetabuli: joint loading with severe pincer impingement and its theoretical implications for surgical therapy

Severe pincer impingement (acetabular protrusio) is an established cause of hip pain and osteoarthritis. The proposed underlying pathomechanism is a dynamic pathological contact of the prominent acetabular rim with the femoral head-neck junction. However, this cannot explain the classically described medial osteoarthritis in these hips. We therefore asked: (1) Does an overload exist in the medial aspect of the protrusio joint? and (2) What is the influence of three contemporary joint-preserving procedures on load distribution in protrusio hips? In vivo force and motion data for walking and standing to sitting were applied to six 3D finite element models (normal, dysplasia, protrusio, acetabular rim trimming, acetabular reorientation, and combined reorientation/rim trimming). Compared with dysplasia, the protrusio joint resulted in opposite patterns of von Mises stress and contact pressure during walking. In protrusio hips, we found an overload at the medial margin of the lunate surface (54% higher than normal). Isolated rim trimming further increased the medial overload (up to 28% higher than protrusio), whereas acetabular reorientation with/without rim trimming reduced stresses by up to 25%. Our results can be used as an adjunct for surgical decision making in the treatment of acetabular protrusio.

Directional statistics: introduction

In many of the natural and physical sciences, measurements are directions, either in two or three dimensions. The analysis of directional data relies on specific statistical models and procedures, which differ from the usual models and methodologies of Cartesian data. This chapter briefly introduces statistical models and inference for this type of data. The basic von Mises-Fisher distribution is introduced and nonparametric methods such as goodness-of-fit tests are presented. Further references are given for exploring related topics such as correlation and regression.