A genetic algorithm/method of moments approach to the optimization of an RF coil for MRI applications - Theoretical considerations - Abstract

A Combined Genetic Algorithm and Method of Moments design methods is presented for the design of unusual near-field antennas for use in Magnetic Resonance Imaging systems. The method is successfully applied to the design of an asymmetric coil structure for use at 190MHz and demonstrates excellent radiofrequency field homogeneity.

An investigation of the thermal and tensile properties of PFA following γ-radiolysis

For some applications for fluoropolymers they must be subjected to high-energy radiation, e.g., when they are grafted with styrene using an irradiation method to produce fuel cell membranes or matrix supports for combinatorial chemistry. In some of these applications they may be subjected to mechanical stress or elevated temperature, so it is important to elucidate the effects of the radiolysis on these properties. In the present work the effect of gamma-radiolysis on the glass transition, melting behavior, and thermal stability of PFA has been studied as well as the effect of the radiolysis on the tensile properties of the polymer.

Measuring the accumulated hazards of smoking: global and regional estimates for 2000

Objective: Current prevalence of smoking, even where data are available, is a poor proxy for cumulative hazards of smoking, which depend on several factors including the age at which smoking began, duration of smoking, number of cigarettes smoked per day, degree of inhalation, and cigarette characteristics such as tar and nicotine content or filter type. Methods: We extended the Peto-Lopez smoking impact ratio method to estimate accumulated hazards of smoking for different regions of the world. Lung cancer mortality data were obtained from the Global Burden of Disease mortality database. The American Cancer Society Cancer Prevention Study, phase 11 (CPS-II) with follow up for the years 1982 to 1988 was the reference population. For the global application of the method, never-smoker lung cancer mortality rates were chosen based on the estimated use of coal for household energy in each region. Results: Men in industrialised countries of Europe, North America, and the Western Pacific had the largest accumulated hazards of smoking. Young and middle age males in many regions of the developing world also had large smoking risks. The accumulated hazards of smoking for women were highest in North America followed by Europe. Conclusions: In the absence of detailed data on smoking prevalence and history, lung cancer mortality provides a robust indicator of the accumulated hazards of smoking. These hazards in developing countries are currently more concentrated among young and middle aged males.

The role of disorder on the AC and DC electrical conductivity of vapour grown carbon nanofibre/epoxy composites

Four dispersion methods were used for the preparation of vapour grown carbon nanofibre (VGCNF)/epoxy composites. It is shown that each method induces certain levels of VGCNF dispersion and distribution within the matrix, and that these have a strong influence on the composite electrical properties. A homogenous VGCNF dispersion does not necessarily imply higher electrical conductivity. In fact, it is concluded that the presence of well distributed clusters, rather than a fine dispersion, is more important for achieving larger conductivities for a given VGCNF concentration. It is also found that the conductivity can be described by a weak disorder regime.

The influence of the dispersion method on the electrical properties of vapor-grown carbon nanofiber/epoxy composites

The influence of the dispersion of vapor-grown carbon nanofibers (VGCNF) on the electrical properties of VGCNF/ Epoxy composites has been studied. A homogenous dispersion of the VGCNF does not imply better electrical properties. In fact, it is demonstrated that the most simple of the tested dispersion methods results in higher conductivity, since the presence of well-distributed nanofiber clusters appears to be a key factor for increasing composite conductivity.

Parameters of electrostatic spraying and its influence on the application efficiency

When the electrostatic spraying is used correctly, it provides advantages over conventional systems, however many factors can affect the system efficiency. Therefore, the objective of this study was to evaluate the charge/mass ratio (Q/M) at different spraying distances (0, 1, 2, 3, 4 and 5 m), and the liquid deposition efficiency on the target. Evaluating the Q/M ratio the Faraday cage method was used and to evaluate the liquid deposition efficiency the artificial targets were positioned longitudinally and transversely to the spray jet. It was found that the spraying distance affects the Q/M ratio, consequently, the liquid deposition efficiency. For the closest distance to the target the Q/M ratio was 4.11 mC kg-1, and at distances of 1, 2, 3, 4 and 5 m, the ratio decreased to 1.38, 0.64, 0.31, 0.17 and 0.005 mC kg-1, respectively. For the liquid deposition, the electrostatic system was affected by the target orientation and spraying distance. The target transversely to the jet of liquid did not improve the liquid deposition, but longitudinally increased the deposition up to 3 meters of distance.

Relationships between NPM, the use of PM practices and the organizational performance: empirical evidence from government agencies

Purpose – this paper has two main purposes: (1)explore if government agencies more oriented to NPM postulates are more willing to use PM practices and to improve their performance; and (2) investigate whether the fit between the use of PM practices and the organizationa performance is dependent upon from the capacity of agencies to adapt its structures to changes introduced by NPM reforms. Design/methodology/approach - this paper is based on the survey method and provides empirical evidence from Portuguese government agencies.Findings (mandatory) - Our findings suggest that government agencies that made structural arrangements under the NPM reforms are more willing to use PM practices and will perform better than other agencies. In addition, this paper show that therelationship between the use of PM practices and the organizational performance is dependent upon from the agencies capacity to adopt new structural arrangements under the NPM reforms.Practical implications – this paper has three main contributions: (1) contribute to knowledge about the relationship between the introduction of NPM changes in the use of PM practices; (2) contribute to clarify whether agencies more oriented to NPM postulates are improving performance; and (3) help to clarify the way the organizations should adapt their structures for to be more effective in the use of PM practices. Originality/value - The quantitative empirical research, based on the unique survey applied to Portuguese government agencies on this field, allow us to add to prior research mainly based on case studies and oriented to local governments (Budding, 2004).

Monetary channels of social inclusion: a case study of basic income and the Caixa Econômica Federal in Brazil

This article reports evidence of new monetary channels for social inclusion involving basic income policies and the Caixa Econômica Federal, a Brazilian government savings bank. Since the Plano Real (Brazilian currency) and the liberalization of banking in the 1990s, the realization of competitive advantages by the Caixa as social policy agent and the importance of citizenship cards differ from existing theories of bank change, financial inclusion and monetary policy. Multi-method research reveals the importance of 1) political theories of basic income, 2) conceptions of citizenship and social justice, and 3) a back to the future modernization of government banking. This provides alternatives to contemporary market-based banking theory, neo-liberal policies, private and non-governmental microfinance strategies, and theories in political economy about fiscal constraints to social policies. New monetary channels of change also suggest that zero sum theories about politics, monetary authority and social inclusion are amiss.

The epidemiology and control of schistosomiasis mansoni where Biomphalaria tenagophila is the snail host

The epidemiology and control of schistosomiasis mansoni in the Municipality of Pedro de Toledo (State of S. Paulo, Brazil) since 1980, has been studied. In 1980 the prevalence evaluated by stool exams (Kato-Katz method) was 22.8% and no statistical difference at 5.0% level was observed between rural and urban zones. The intensity of infection was low (58.5 eggs/g of faeces); the highest prevalence and intensity of infection rates were observed within the group of from 5 to 29 years of age, respectively. The transmission of schistosomiasis usually occurred during leisure time. The majority of the carriers of the parasite were asymptomatic. Of the B. tenagophila examined only 0.4% were found to be infected. The control programme has been intensified from 1981 on resulting in a sharp decrease in the prevalence from 22.8% in 1980 to 6% at the present time. This result shows that, in spite of the control programme there is a residual human prevalence. A beginning has been made on the investigation into the possible causes of this residual prevalence (6.0% was maintained through out 1987).

Microscopic analysis of "prato", "mussarela" and "mineiro" cheese sold in street markets of the City of S. Paulo, Southeastern Brazil

INTRODUCTION: Cheese should be produced from ingredients of good quality and processed under hygienic conditions. Further, cheese should be transported, stored and sold in an appropriate manner in order to avoid, among other things, the incorporation of extraneous materials (filth) of biological origin or otherwise, in contravention of the relevant food legislation. The aim of the study was to evaluate the hygienic conditions of "prato", "mussarela", and "mineiro" cheeses sold at the street food markets in the city of S. Paulo, Brazil. MATERIALS AND METHOD: Forty-seven samples of each of the three types of cheese were collected during the period from March, 1993 to February, 1994. The Latin square was used as a statistical model for sampling and random selection of the street markets from which to collect the cheese samples. The samples were analysed for the presence of extraneous matters outside for which purpose the samples were washed and filtered and inside, for which the methodology of enzymathic digestion of the sample with pancreatine, followed by filtering,was used. RESULTS AND CONCLUSION: Of the 141 samples analysed, 75.9% exhibited at least one sort of extraneous matters. For the "prato" and "mussarela" cheeses, the high number of contaminated samples was due mainly to extraneous matters present inside the cheese, whereas in the "mineiro" cheese, besides the internal filth, 100% of the samples had external filth.

Comparative evaluation of underlying causes of death processed by the Automated Classification of Medical Entities and the Underlying Cause of Death Selection Systems

INTRODUCTION: The correct identification of the underlying cause of death and its precise assignment to a code from the International Classification of Diseases are important issues to achieve accurate and universally comparable mortality statistics These factors, among other ones, led to the development of computer software programs in order to automatically identify the underlying cause of death. OBJECTIVE: This work was conceived to compare the underlying causes of death processed respectively by the Automated Classification of Medical Entities (ACME) and the "Sistema de Seleção de Causa Básica de Morte" (SCB) programs. MATERIAL AND METHOD: The comparative evaluation of the underlying causes of death processed respectively by ACME and SCB systems was performed using the input data file for the ACME system that included deaths which occurred in the State of S. Paulo from June to December 1993, totalling 129,104 records of the corresponding death certificates. The differences between underlying causes selected by ACME and SCB systems verified in the month of June, when considered as SCB errors, were used to correct and improve SCB processing logic and its decision tables. RESULTS: The processing of the underlying causes of death by the ACME and SCB systems resulted in 3,278 differences, that were analysed and ascribed to lack of answer to dialogue boxes during processing, to deaths due to human immunodeficiency virus [HIV] disease for which there was no specific provision in any of the systems, to coding and/or keying errors and to actual problems. The detailed analysis of these latter disclosed that the majority of the underlying causes of death processed by the SCB system were correct and that different interpretations were given to the mortality coding rules by each system, that some particular problems could not be explained with the available documentation and that a smaller proportion of problems were identified as SCB errors. CONCLUSION: These results, disclosing a very low and insignificant number of actual problems, guarantees the use of the version of the SCB system for the Ninth Revision of the International Classification of Diseases and assures the continuity of the work which is being undertaken for the Tenth Revision version.

Histogram-based DNA analysis for the visualization of chromosome, genome and species information

We describe a novel approach to explore DNA nucleotide sequence data, aiming to produce high-level categorical and structural information about the underlying chromosomes, genomes and species. The article starts by analyzing chromosomal data through histograms using fixed length DNA sequences. After creating the DNA-related histograms, a correlation between pairs of histograms is computed, producing a global correlation matrix. These data are then used as input to several data processing methods for information extraction and tabular/graphical output generation. A set of 18 species is processed and the extensive results reveal that the proposed method is able to generate significant and diversified outputs, in good accordance with current scientific knowledge in domains such as genomics and phylogenetics.

Hybrid fuzzy Monte Carlo and logic programming model for distribution network reconfiguration in the presence of outages

This paper presents a methodology for distribution networks reconfiguration in outage presence in order to choose the reconfiguration that presents the lower power losses. The methodology is based on statistical failure and repair data of the distribution power system components and uses fuzzy-probabilistic modelling for system component outage parameters. Fuzzy membership functions of system component outage parameters are obtained by statistical records. A hybrid method of fuzzy set and Monte Carlo simulation based on the fuzzy-probabilistic models allows catching both randomness and fuzziness of component outage parameters. Once obtained the system states by Monte Carlo simulation, a logical programming algorithm is applied to get all possible reconfigurations for every system state. In order to evaluate the line flows and bus voltages and to identify if there is any overloading, and/or voltage violation a distribution power flow has been applied to select the feasible reconfiguration with lower power losses. To illustrate the application of the proposed methodology to a practical case, the paper includes a case study that considers a real distribution network.

Optimization of QuEChERS method for the analysis of organochlorine pesticides in soils with diverse organic matter

A QuEChERS method has been developed for the determination of 14 organochlorine pesticides in 14 soils from different Portuguese regions with wide range composition. The extracts were analysed by GC-ECD (where GC-ECD is gas chromatography-electron-capture detector) and confirmed by GC-MS/MS (where MS/MS is tandem mass spectrometry). The organic matter content is a key factor in the process efficiency. An optimization was carried out according to soils organic carbon level, divided in two groups: HS (organic carbon>2.3%) and LS (organic carbon<2.3%). Themethod was validated through linearity, recovery, precision and accuracy studies. The quantification was carried out using a matrixmatched calibration to minimize the existence of the matrix effect. Acceptable recoveries were obtained (70–120%) with a relative standard deviation of ≤16% for the three levels of contamination. The ranges of the limits of detection and of the limits of quantification in soils HS were from 3.42 to 23.77 μg kg−1 and from 11.41 to 79.23 μg kg−1, respectively. For LS soils, the limits of detection ranged from 6.11 to 14.78 μg kg−1 and the limits of quantification from 20.37 to 49.27 μg kg−1. In the 14 collected soil samples only one showed a residue of dieldrin (45.36 μg kg−1) above the limit of quantification. This methodology combines the advantages of QuEChERS, GC-ECD detection and GC-MS/MS confirmation producing a very rapid, sensitive and reliable procedure which can be applied in routine analytical laboratories.

Mould and yeast identification in archival settings: preliminary results on the use of traditional methods and molecular biology options in Portuguese archives

This project was developed to fully assess the indoor air quality in archives and libraries from a fungal flora point of view. It uses classical methodologies such as traditional culture media – for the viable fungi – and modern molecular biology protocols, especially relevant to assess the non-viable fraction of the biological contaminants. Denaturing high-performance liquid chromatography (DHPLC) has emerged as an alternative to denaturing gradient gel electrophoresis (DGGE) and has already been applied to the study of a few bacterial communities. We propose the application of DHPLC to the study of fungal colonization on paper-based archive materials. This technology allows for the identification of each component of a mixture of fungi based on their genetic variation. In a highly complex mixture of microbial DNA this method can be used simply to study the population dynamics, and it also allows for sample fraction collection, which can, in many cases, be immediately sequenced, circumventing the need for cloning. Some examples of the methodological application are shown. Also applied is fragment length analysis for the study of mixed Candida samples. Both of these methods can later be applied in various fields, such as clinical and sand sample analysis. So far, the environmental analyses have been extremely useful to determine potentially pathogenic/toxinogenic fungi such as Stachybotrys sp., Aspergillus niger, Aspergillus fumigatus, and Fusarium sp. This work will hopefully lead to more accurate evaluation of environmental conditions for both human health and the preservation of documents.