923 resultados para Maria Carolina, Queen, consort of Ferdinand I, King of the Two Sicilies, 1752-1814.
Resumo:
The reduction of the two-fermion Bethe-Salpeter equation in the framework of light-front dynamics is studied for the Yukawa model. It yields auxiliary three-dimensional quantities for the transition matrix and the bound state. The arising effective interaction can be perturbatively expanded in powers of the coupling constant gs allowing a defined number of boson exchanges; it is divergent and needs renormalization; it also includes the instantaneous term of the Dirac propagator. One possible solution of the renormalization problem of the boson exchanges is shown to be provided by expanding the effective interaction beyond single boson exchange. The effective interaction in ladder approximation up to order g4 s is discussed in detail. It is shown that the effective interaction naturally yields the box counterterm required to be introduced ad hoc previously. The covariant results of the Bethe-Salpeter equation can be recovered from the corresponding auxiliary three-dimensional quantities.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Objective: To analyze the effects of thermal cycling on the microtensile shear bond strength of a self-etching and a conventional pit and fissure sealants to dental enamel. Material and Method: Twenty-four healthy human molars extracted for orthodontic reasons, were sectioned in the mesio-distal direction and divided into two groups (n=24) according to the sealant to be applied: GI - conventional sealant Climpro (3M/ESPE) and GII - self-etching sealant Enamel Loc (Premier Dental). The sealants were applied on flattened enamel in matrixes 1 mm in diameter, in accordance with the manufacturers' recommendations. The specimens were stored in distilled water at 37°C for 24 hours. After this, half the samples of both groups were submitted to 500 thermal cycles in 30s baths at temperatures between 5 and 55°C. Forty-eight hours after the samples were made, the microtensile shear test was performed in an Instron 4411 test machine, with a stainless steel wire with a cylindrical cross section of 0.2mm in diameter at a constant speed of 0.5mm/s. The bond strength values were submitted to ANOVA for 2 factors and the fracture patterns were examined under an optical microscope at 65X magnification. Results: Thermal cycling did not influence the bond strength of the two sealants. The conventional sealant Climpro presented a statistically higher microtensile shear bond strength (11.72MPa, 11.34MPa with and without cycling, respectively) than the self-etching sealant Enamel Loc (5.92MPa, 5.02MPa with and without cycling, respectively). Fracture pattern analysis showed the occurrence of 100% of adhesive failures for Enamel Loc, while the conventional sealant Climpro presented 95% of adhesive failures and 5% of mixed failures. Conclusion: The conventional sealant presented higher microtensile shear bond strength to dental enamel in comparison with the self-etching sealant. Thermal cycling did not affect the bond strength of the sealants used in this study. © 2011 Nova Science Publishers, Inc.
Resumo:
The immatures of males of two species of Camponotus ants (Hymenoptera: Formicidae) are described and compared by light and electron microscopy. The numbers of larval instars were determined: Camponotus rufipes Fabricius (Hymenoptera: Formicidae) have four instars; and Camponotus vittatus Forel have three. Male larvae of the two species are similar to previously described Camponotus larvae, sharing the following traits: basic shape of body and mandible, presence of 'chiloscleres', 'praesaepium' (some specimens), labial pseudopalps, and ten pairs of spiracles. However, larvae of the two species can be separated by bodily dimensions and based on their hair number and types. Worker larvae of C. vittatus previously described are extensively similar to male larvae, with only a few inconspicuous differences that may result from intraspecific variation or sexual differences.
Resumo:
In order to evaluate the hind limbs of caviomorph rodents a descriptive analysis of the Cuniculus paca (Linnaeus, 1766) and Hydrochoerus hydrochaeris (Linnaeus, 1766) was performed using anatomical specimens, radiography, computed tomography (CT) and full-coloured prototype models to generate bone anatomy data. The appendicular skeleton of the two largest rodents of Neotropical America was compared with the previously reported anatomical features of Rattus norvegicus (Berkenhout, 1769) and domestic Cavia porcellus (Linnaeus, 1758). The structures were analyzed macroscopically and particular findings of each species reported. Features including the presence of articular fibular projection and lunulae were observed in the stifle joint of all rodents. Imaging aided in anatomical description and, specifically in the identification of bone structures in Cuniculus paca and Hydrochoerus hydrochaeris. The imaging findings were correlated with the anatomical structures observed. The data may be used in future studies comparing these animals to other rodents and mammalian species. © 2012 Blackwell Verlag GmbH.
Resumo:
It is possible to show that there are three independent families of models describing a massive spin-2 particle via a rank-2 tensor. One of them contains the massive Fierz-Pauli model, the only case described by a symmetric tensor. The three families have different local symmetries in the massless limit and can not be interconnected by any local field redefinition. We show here, however, that they can be related with the help of a decoupled and nondynamic (spectator) field. The spectator field may be either an antisymmetric tensor B μν=-Bνμ, a vector Aμ or a scalar field φ, corresponding to each of the three families. The addition of the extra field allows us to formulate master actions which interpolate between the symmetric Fierz-Pauli theory and the other models. We argue that massive gravity models based on the Fierz-Pauli theory are not expected to be equivalent to possible local self-interacting theories built up on top of the two new families of massive spin-2 models. The approach used here may be useful to investigate dual (nonsymmetric) formulations of higher-spin particles. © 2013 American Physical Society.
Resumo:
Background: The peptide Paulistine was isolated from the venom of wasp Polybia paulista. This peptide exists under a natural equilibrium between the forms: oxidised - with an intra-molecular disulphide bridge; and reduced - in which the thiol groups of the cysteine residues do not form the disulphide bridge. The biological activities of both forms of the peptide are unknown up to now. Methods: Both forms of Paulistine were synthesised and the thiol groups of the reduced form were protected with the acetamidemethyl group [Acm-Paulistine] to prevent re-oxidation. The structure/activity relationships of the two forms were investigated, taking into account the importance of the disulphide bridge. Results: Paulistine has a more compact structure, while Acm-Paulistine has a more expanded conformation. Bioassays reported that Paulistine caused hyperalgesia by interacting with the receptors of lipid mediators involved in the cyclooxygenase type II pathway, while Acm-Paullistine also caused hyperalgesia, but mediated by receptors involved in the participation of prostanoids in the cyclooxygenase type II pathway. Conclusion: The acetamidemethylation of the thiol groups of cysteine residues caused small structural changes, which in turn may have affected some physicochemical properties of the Paulistine. Thus, the dissociation of the hyperalgesy from the edematogenic effect when the actions of Paulistine and Acm-Paulistine are compared to each other may be resulting from the influence of the introduction of Acm-group in the structure of Paulistine. General significance: The peptides Paulistine and Acm-Paulistine may be used as interesting tools to investigate the mechanisms of pain and inflammation in future studies. © 2013 Elsevier B.V.
Resumo:
The agricultural sector‟s contribution to GDP and to exports in Jamaica has been declining with the post-war development process that has led to the differentiation of the economy. In 2010, the sector contributed 5.8% of GDP, and 3% to the exports (of goods), but with 36% of employment, it continues to be a major employer. With a little less than half of the population living in rural communities, agricultural activities, and their linkages with other economic activities, continue to play an important role as a source of livelihoods, and by extension, the economic development of the country. Sugar cane cultivation has, with the exception of a couple of decades in the twentieth century when it was superseded by bananas, dominated the agricultural export sector for centuries as the source of the raw materials for the manufacture of sugar for export. In 2005, sugar cane itself accounted for 6.4% of the sector‟s contribution to GDP, and 52% of the contribution of agricultural exports to GDP. Production for the domestic market has long been the larger subsector, organized around the production of root crops, especially yams, vegetables and condiments. To analyse the potential impact of climate change on the agricultural sector, this study selected three important crops for detailed examination. In particular, the study selected sugar cane because of its overwhelming importance to the export subsector of agriculture, and yam and escallion for both their contribution to the domestic subsector as well as the preeminent role yams and escallion play in the economic activities of the communities in the hills of central Jamaica, and the plains of the southwest respectively. As with other studies in this project, the methodology adopted was to compare the estimated values of output on the SRES A2 and B2 Scenarios with the value of output on a “baseline” Business As Usual (BAU), and then estimate the net benefits of investment in the relevant to climate change for the selected crops. The A2 and B2 Scenarios were constructed by applying forecasts of changes in temperature and precipitation generated by INSMET from ECHAM inspired climate models. The BAU “baseline” was a linear projection of the historical trends of yields for each crop. Linear models of yields were estimated for each crop with particular attention to the influence of the two climate variables – temperature and precipitation. These models were then used to forecast yields up to 2050 (table1). These yields were then used to estimate the value of output of the selected crop, as well as the contribution to overall GDP, on each Scenario. The analysis suggested replanting sugar cane with heat resistant varieties, rehabilitating irrigation systems where they existed, and establishing technologically appropriate irrigation systems where they were not for the three selected crops.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
This study compared the effectiveness of the multifocal visual evoked cortical potentials (mfVEP) elicited by pattern pulse stimulation with that of pattern reversal in producing reliable responses (signal-to-noise ratio >1.359). Participants were 14 healthy subjects. Visual stimulation was obtained using a 60-sector dartboard display consisting of 6 concentric rings presented in either pulse or reversal mode. Each sector, consisting of 16 checks at 99% Michelson contrast and 80 cd/m2 mean luminance, was controlled by a binary m-sequence in the time domain. The signal-to-noise ratio was generally larger in the pattern reversal than in the pattern pulse mode. The number of reliable responses was similar in the central sectors for the two stimulation modes. At the periphery, pattern reversal showed a larger number of reliable responses. Pattern pulse stimuli performed similarly to pattern reversal stimuli to generate reliable waveforms in R1 and R2. The advantage of using both protocols to study mfVEP responses is their complementarity: in some patients, reliable waveforms in specific sectors may be obtained with only one of the two methods. The joint analysis of pattern reversal and pattern pulse stimuli increased the rate of reliability for central sectors by 7.14% in R1, 5.35% in R2, 4.76% in R3, 3.57% in R4, 2.97% in R5, and 1.78% in R6. From R1 to R4 the reliability to generate mfVEPs was above 70% when using both protocols. Thus, for a very high reliability and thorough examination of visual performance, it is recommended to use both stimulation protocols.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
A phylogenetic analysis based on nuclear ITS and plastid trnK intron sequences confirms that Dahlgrenodendron, Sinopora, Triadodaphne, and Yasunia are members of the Cryptocarya group, as expected from morphology. Dahlgrenodendron from South Africa is sister to Aspidostemon from Madagascar. Triadodaphne inaequitepala is nested within Endiandra (both from Australasia), and Yasunia from South America is nested among South American Beilschmiedia species. Sinopora is a member of the Beilschmiedia clade, but its precise position is still uncertain. Among large genera of the group, Cryptocarya is clearly monophyletic, and Endiandra appears to be as well, if T. inaequitepala is included. Beilschmiedia is paraphyletic with respect to (at least) Potameia and Yasunia. Most well-supported clades within genera are geographically homogeneous, except a clade including the Chilean Cryptocarya alba and two New Caledonian species. Both Beilschmiedia and Cryptocarya have reached the Americas more than once. Four-locular anthers are plesiomorphic in the Cryptocarya group; two-locular anthers have arisen by fusion of the two pollen sacs of a theca. In the plesiomorphic fruit type, the ovary is completely enclosed in receptacular tissue; a superior fruit, seated free on its pedicel, is a synapomorphy of the Beilschmiedia clade.
Resumo:
Aim The aim of this study was to understand the biogeography of Brachygastra. As the spatial component of evolution is of fundamental importance to understanding the processes shaping the evolution of taxa, the known geological history of the Neotropical region was used together with the current phylogeny and distribution of species to investigate questions concerning the biogeography of Brachygastra: the ancestral ranges of Brachygastra species; their areal relationships and their congruence with previously published hypotheses; the possible associated vicariance events and the influence of land bridges between North and South America, and the split between the Amazon and Atlantic forests. Location Neotropical region, from Mexico to central Argentina and southern USA. Methods Statistical dispersal–vicariance analysis (S-DIVA) was used to reconstruct the possible ancestral ranges of Brachygastra species based on their phylogeny (divided into three groups, lecheguana, scuttelaris and smithii). A Brooks parsimony analysis (BPA) and component analysis were performed to reconstruct the areal relationships of these species within the Neotropics. Results S-DIVA suggested a widespread, South American ancestral region for Brachygastra. The ancestral B. azteca probably reached the Nearctic before a posterior vicariance event separated it from the species groups ((lecheguana (scutellaris + smithii))), that stayed in the Atlantic forest. The ancestral (scutellaris + smithii groups) possibly reached the Amazon by dispersal, and the subsequent vicariance event splitting the Atlantic forest and Amazon separated the groups into scutellaris in the Atlantic forest and smithii in the Amazon. BPA and component analyses suggested that the Nearctic was a sister area to other regions, the Andes and Mesoamerica was a sister area to the Neotropical regions and the Amazon was closely related to the Atlantic forest. Main conclusions The phylogeny and distribution of Brachygastra suggest the influence of a land bridge between the Northern and Southern Hemispheres affecting the cladogenesis of B. azteca and the importance of the formation of the two blocks of forests in South America to the cladogenesis of the main groups of Brachygastra. Future comparisons between the distribution patterns of other taxa should enable a more precise identification of the possible events and outcomes, adding robustness to the hypothesized areal relationships.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Context. The giant anteater, Myrmecophaga tridactyla, is a large insectivorous mammal from Cerrado which is classified as vulnerable by the IUCN's red list. In spite of frequent giant anteater casualties, there continues to be a lack of published data on how road and landscape attributes affect road-kill rates - information that could prove useful in guiding mitigation measures.Aims. We seek to determine whether road and landscape attributes influence the incidence of road-kills of the giant anteater.Methods. From February 2002 to December 2012 (except for 2004), five roads in two regions in south-eastern Brazil were surveyed twice each month by car. We recorded temporal road-kill data for the giant anteater and related spatial road variables. These variables were also recorded at regular control sites every 2 km. We also took traffic volume data on stretches of the two roads to correlate with road-kills.Key results. Of the 45 anteater casualties recorded, there was a predominance of adult males. On roads MG-428 and SP-334, we found anteater road-kills were more common in the dry season, negatively correlated with traffic volume and related to the presence of native vegetation. Accordingly, road-kill sites tended to occur near the cerrado and grasslands and also appeared more frequently on some straight stretches of roadways. Although it was not shown to influence road-kill rates, topography data does point to regular overpass/underpass locations allowing population connectivity. Termitaria or ant nests were present at all road-kill sites, with 86% having signs of feeding.Conclusions. Native vegetation along roadways, together with straight road design, increases the probability of anteater road-kills by 40.1%.Implications. For mitigation, mowing and removing insect nests on roadsides, as well as roadside wildlife fencing in cerrado and grassland areas is suggested. Warning signs and radar to reduce vehicle speed are recommended for both human safety and anteater conservation. With regard to population connectivity, the absence of aggregated anteater road-kill data in this study meant that there were no particular crossing locations identified. However, the collected topography data do show places that could be used for roadway crossings. The measures indicated may apply to similar species and types of topography on other continents.