The use of locally available materials in fish feed production

In Nigeria, the culture of fish is gaining importance, but local fish farmers face a set back because of the stoppage on importation of fish feed. Locally available raw materials such as yam, plantain, banana, cowpeas, macuna, maize, cassava, millet, sorghum, groundnut, sunnhemp seed and brewery wastes are considered as potential materials for fish feed. These have been examined on their minimum protein contributions since this is the most expensive part of the fish feed. Alternative sources to animal proteins are also examined. Plant protein from groundnut, melon, mucuna and others compare favourably with bloodmeal mixture and thus can be used to replace the more expensive animal proteins. Pellet feed can be produced on a small scale or commercial basis from the locally available raw materials and the fish farmer is advised to seek assistance from qualified fisheries personnel

A Wide Band Strong Acoustic Absorption in a Locally Network Anechoic Coating

Composite materials with interpenetrating network structures usually exhibit unexpected merit due to the cooperative interaction. Locally resonant phononic crystals (LRPC) exhibit excellent sound attenuation performance based on a periodical arrangement of sound wave scatters. Inspired by the interpenetrating network structure and the LRPC concept, we develop a locally network anechoic coating (LNAC) that can achieve a wide band of underwater strong acoustic absorption. The experimental results show that the LNAC possesses an excellent underwater acoustic absorbing capacity in a wide frequency range. Moreover, in order to investigate the impact of the interpenetrating network structure, we fabricate a faultage structure sample and the network is disconnected by hard polyurethane (PU). The experimental comparison between the LNAC and the faultage structure sample shows that the interpenetrating network structure of the LNAC plays an important role in achieving a wide band strong acoustic absorption.

Locally resonant phononic woodpile: A wide band anomalous underwater acoustic absorbing material

To meet the demand of modern acoustic absorbing material for which acoustic absorbing frequency region can be readily tailored, we introduced woodpile structure into locally resonant phononic crystal (LRPC) and fabricated an underwater acoustic absorbing material, which is called locally resonant phononic woodpile (LRPW). Experimental results show that LRPW has a strong capability of absorbing sound in a wide frequency range. Further theoretical research revealed that LRPC units and woodpile structure in LRPW play an important role in realization of wide band underwater strong acoustic absorption.

Effect of locally available spices on the organoleptic and storage periods of Heterotis niloticus

Investigation were carried out on the effect of some locally available species in the enhancement of the organoleptic quality and the storage periods of smoked Heterotis niloticus using Pprosopis africana as common smoke sources. Samples of fresh H. niloticus were bought, cut into chunks while extract juice from pepper, ginger rhizomes, garlic, onion bulb were used as sources of spices. Samples of fish were divided randomly into five (5) batches dipped into spice extract juices for 10 minutes drained and smoked with common firewood. Treatment without spice extract juice served as control. Each batch of fish was smoked for 7 hours on a drum-made smoking kiln products were individually packaged in polythene bag stored at room temperature and used for sensory evaluation and microbial analysis. Results of the sensory evaluation indicated that there was significant difference (P<0.005) for taste, appearance, colour and overall acceptance for the treatments. Ginger juice extract had the best overall acceptance. Similarly there was significant difference (P>0.05) in the microbial analysis. The garlic juice extract had the longest storage period with minimum total plate and mould count after 8 weeks

The head-body weight and head-body length relationship of Synodontis schall (Bloch and Schneider 1801) in Asa Lake, Ilorin, Nigeria

A total of 710 specimens of Synodontis schall were analyzed for the head body weight and head body length relationship. The head constituted 40% of the total body weight and 30% of the total body length. The mean head weight for male and female computed was 23.90g and 29.13g respectively. Head weight in both male and female was significantly different (P<0.01) while the head length for the combined sexes showed no significant difference (P>0.05). Fat accumulation in the body tissue was prominent in the females than males usually before the breeding season. The significance of the cephalo-nuchal shield in the bony head of Synodontis species compared with some other catfishes in the lake was also discussed

Advanced density functional theory methods for materials science

In this work we chiefly deal with two broad classes of problems in computational materials science, determining the doping mechanism in a semiconductor and developing an extreme condition equation of state. While solving certain aspects of these questions is well-trodden ground, both require extending the reach of existing methods to fully answer them. Here we choose to build upon the framework of density functional theory (DFT) which provides an efficient means to investigate a system from a quantum mechanics description.

Zinc Phosphide (Zn₃P₂) could be the basis for cheap and highly efficient solar cells. Its use in this regard is limited by the difficulty in n-type doping the material. In an effort to understand the mechanism behind this, the energetics and electronic structure of intrinsic point defects in zinc phosphide are studied using generalized Kohn-Sham theory and utilizing the Heyd, Scuseria, and Ernzerhof (HSE) hybrid functional for exchange and correlation. Novel 'perturbation extrapolation' is utilized to extend the use of the computationally expensive HSE functional to this large-scale defect system. According to calculations, the formation energy of charged phosphorus interstitial defects are very low in n-type Zn₃P₂ and act as 'electron sinks', nullifying the desired doping and lowering the fermi-level back towards the p-type regime. Going forward, this insight provides clues to fabricating useful zinc phosphide based devices. In addition, the methodology developed for this work can be applied to further doping studies in other systems.

Accurate determination of high pressure and temperature equations of state is fundamental in a variety of fields. However, it is often very difficult to cover a wide range of temperatures and pressures in an laboratory setting. Here we develop methods to determine a multi-phase equation of state for Ta through computation. The typical means of investigating thermodynamic properties is via ’classical’ molecular dynamics where the atomic motion is calculated from Newtonian mechanics with the electronic effects abstracted away into an interatomic potential function. For our purposes, a ’first principles’ approach such as DFT is useful as a classical potential is typically valid for only a portion of the phase diagram (i.e. whatever part it has been fit to). Furthermore, for extremes of temperature and pressure quantum effects become critical to accurately capture an equation of state and are very hard to capture in even complex model potentials. This requires extending the inherently zero temperature DFT to predict the finite temperature response of the system. Statistical modelling and thermodynamic integration is used to extend our results over all phases, as well as phase-coexistence regions which are at the limits of typical DFT validity. We deliver the most comprehensive and accurate equation of state that has been done for Ta. This work also lends insights that can be applied to further equation of state work in many other materials.

Ferromagnetic Resonance Force Microscopy

A new approach to magnetic resonance was introduced in 1992 based upon detection of spin-induced forces by J. Sidles [1]. This technique, now called magnetic resonance force microscopy (MRFM), was first demonstrated that same year via electron paramagnetic resonance (EPR) by D. Rugar et al. [2]. This new method combines principles of magnetic resonance with those of scanned probe technology to detect spin resonance through mechanical, rather than inductive, means. In this thesis the development and use of ferromagnetic resonance force microscopy (FMRFM) is described. This variant of MRFM, which allows investigation of ferromagnetic samples, was first demonstrated in 1996 by Z. Zhang et al. [3]. FMRFM enables characterization of (a) the dynamic magnetic properties of microscale magnetic devices, and (b) the spatial dependence of ferromagnetic resonance within a sample. Both are impossible with conventional ferromagnetic resonance techniques.

Ferromagnetically coupled systems, however, pose unique challenges for force detection. In this thesis the attainable spatial resolution - and the underlying physical mechanisms that determine it - are established. We analyze the dependence of the magnetostatic modes upon sample dimensions using a series of microscale yttrium iron garnet (YIG) samples. Mapping of mode amplitudes within these sample is attained with an unprecedented spatial resolution of 15μm. The modes, never before analyzed on this scale, fit simple models developed in this thesis for samples of micron dimensions. The application of stronger gradient fields induces localized perturbation of the ferromagnetic resonance modes. The first demonstrations of this effect are presented in this study, and a simple theoretical model is developed to explain our observations. The results indicate that the characteristics of the locally-detected ferromagnetic modes are still largely determined by the external fields and dimensions of the entire sample, rather than by the localized interaction volume (i.e., the locale most strongly affected by the local gradient field). Establishing this is a crucial first step toward understanding FMRFM in the high gradient field limit where the dispersion relations become locally determined. In this high gradient field regime, FMRFM imaging becomes analogous with that of EPR MRFM.

FMRFM has also been employed to characterize magnetic multilayers, similar to those utilized in giant magnetoresistance (GMR) devices, on a lateral scale 40 x 40μm. This is orders of magnitude smaller than possible via conventional methods. Anisotropy energies, thickness, and interface qualities of individual layers have been resolved.

This initial work clearly demonstrates the immense and unique potential that FMRFM offers for characterizing advanced magnetic nanostructures and magnetic devices.

Lock Acquisition and Sensitivity Analysis of Advanced LIGO Interferometers

Laser interferometer gravitational wave observatory (LIGO) consists of two complex large-scale laser interferometers designed for direct detection of gravitational waves from distant astrophysical sources in the frequency range 10Hz - 5kHz. Direct detection of space-time ripples will support Einstein's general theory of relativity and provide invaluable information and new insight into physics of the Universe.

Initial phase of LIGO started in 2002, and since then data was collected during six science runs. Instrument sensitivity was improving from run to run due to the effort of commissioning team. Initial LIGO has reached designed sensitivity during the last science run, which ended in October 2010.

In parallel with commissioning and data analysis with the initial detector, LIGO group worked on research and development of the next generation detectors. Major instrument upgrade from initial to advanced LIGO started in 2010 and lasted till 2014.

This thesis describes results of commissioning work done at LIGO Livingston site from 2013 until 2015 in parallel with and after the installation of the instrument. This thesis also discusses new techniques and tools developed at the 40m prototype including adaptive filtering, estimation of quantization noise in digital filters and design of isolation kits for ground seismometers.

The first part of this thesis is devoted to the description of methods for bringing interferometer to the linear regime when collection of data becomes possible. States of longitudinal and angular controls of interferometer degrees of freedom during lock acquisition process and in low noise configuration are discussed in details.

Once interferometer is locked and transitioned to low noise regime, instrument produces astrophysics data that should be calibrated to units of meters or strain. The second part of this thesis describes online calibration technique set up in both observatories to monitor the quality of the collected data in real time. Sensitivity analysis was done to understand and eliminate noise sources of the instrument.

Coupling of noise sources to gravitational wave channel can be reduced if robust feedforward and optimal feedback control loops are implemented. The last part of this thesis describes static and adaptive feedforward noise cancellation techniques applied to Advanced LIGO interferometers and tested at the 40m prototype. Applications of optimal time domain feedback control techniques and estimators to aLIGO control loops are also discussed.

Commissioning work is still ongoing at the sites. First science run of advanced LIGO is planned for September 2015 and will last for 3-4 months. This run will be followed by a set of small instrument upgrades that will be installed on a time scale of few months. Second science run will start in spring 2016 and last for about 6 months. Since current sensitivity of advanced LIGO is already more than factor of 3 higher compared to initial detectors and keeps improving on a monthly basis, upcoming science runs have a good chance for the first direct detection of gravitational waves.

O raciocínio clínico do enfermeiro na avaliação de feridas em clientes com afecções oncológicas

Estudo de natureza qualitativa, descritiva e exploratória, que teve como objeto o raciocínio clínico elaborado pelos enfermeiros ao cuidarem de feridas em clientes com afecções oncológicas. Os objetivos traçados para o estudo foram: identificar as estratégias cognitivas que os enfermeiros com especialização em área oncológica consideram adotar para o estabelecimento de um julgamento clínico na avaliação de feridas em clientes com afecções oncológicas e caracterizar as etapas de elaboração mental para construção do raciocínio clínico que os enfermeiros consideram percorrer quando da avaliação de feridas em cliente acometido por afecções oncológicas. O campo de pesquisa foi o Instituto Nacional do Câncer, no qual os cenários de coleta foi a unidade HC-I nas Seções de Oncologia Clínica, Neurocirurgia, Abdominopélvica, Centro de Tratamento Intensivo e Cirurgia de Cabeça e Pescoço. Os sujeitos do estudo foram treze enfermeiros com especialização em oncologia, que assistiam clientes com afecções oncológicas, há pelo menos cinco anos. A coleta dos dados aconteceu nos meses de junho e julho de 2009, sendo utilizado um roteiro de entrevista semi-estruturada para captar as informações. A análise dos dados foi realizada com base no método de análise de conteúdo, que ao ser aplicado possibilitou a apreensão de quatro categorias: (1) a afecção oncológica como fator expressivo na elaboração mental diagnóstica do enfermeiro; (2) a relevância do conhecimento teórico-prático avançado para a elaboração mental avaliativa do enfermeiro; (3) a construção da elaboração mental para o raciocínio clínico diagnóstico do enfermeiro; (4) a importância da interação humana no contexto avaliativo. Concluiu-se que, este estudo identificou, na discussão das categorias, as quatro principais estratégias cognitivas que os enfermeiros com especialização em área oncológica consideram adotar para o estabelecimento de um julgamento clínico na avaliação de feridas em clientes com afecções oncológicas e caracterizou as etapas de elaboração mental para construção do raciocínio clínico diagnóstico do tipo hipotético-dedutivo e intuitivo. Compreendeu-se que os sujeitos da pesquisa detêm qualidades intelectuais específicas e avançadas, quando elaboram diagnósticos e intervenções baseadas nas respostas humanas em situação de avaliação de feridas nos clientes com doença oncológica, e foi considerado que o ensino pode impulsionar o desenvolvimento das competências cognitivas no sentido de formar profissionais capazes de avaliar o próprio conhecimento, bem como a fomentação de novas pesquisas relativas a essa temática imprescindível para uma assistência de enfermagem qualificada.