Who drives E&P innovation?

Few would argue that the upstream oil and gas industry has become more technology- intensive over the years. At the same time, the increasing costs and complexity of today’s exploration and production (E&P) technologies are making it increasingly difficult for any one company to support an aggressive research and development (R&D) agenda single handedly. The coming together of these two evolutionary forces gives rise to important questions. How does innovation happen in the E&P industry? Specifically, what ideas and inputs flow from which parts of the industry’s value network, and where do these inputs go? And how do firms and organizations from different countries contribute differently to this process? This survey was designed to shed light on these issues.

Sensitivity of edge detection methods for quantifying cell migration assays

Quantitative imaging methods to analyze cell migration assays are not standardized. Here we present a suite of two–dimensional barrier assays describing the collective spreading of an initially–confined population of 3T3 fibroblast cells. To quantify the motility rate we apply two different automatic image detection methods to locate the position of the leading edge of the spreading population after 24, 48 and 72 hours. These results are compared with a manual edge detection method where we systematically vary the detection threshold. Our results indicate that the observed spreading rates are very sensitive to the choice of image analysis tools and we show that a standard measure of cell migration can vary by as much as 25% for the same experimental images depending on the details of the image analysis tools. Our results imply that it is very difficult, if not impossible, to meaningfully compare previously published measures of cell migration since previous results have been obtained using different image analysis techniques and the details of these techniques are not always reported. Using a mathematical model, we provide a physical interpretation of our edge detection results. The physical interpretation is important since edge detection algorithms alone do not specify any physical measure, or physical definition, of the leading edge of the spreading population. Our modeling indicates that variations in the image threshold parameter correspond to a consistent variation in the local cell density. This means that varying the threshold parameter is equivalent to varying the location of the leading edge in the range of approximately 1–5% of the maximum cell density.

Recent emergence of dengue virus serotype 4 in French Polynesia results from multiple introductions from other south pacific islands

BACKGROUND: Infection by dengue virus (DENV) is a major public health concern in hundreds of tropical and subtropical countries. French Polynesia (FP) regularly experiences epidemics that initiate, or are consecutive to, DENV circulation in other South Pacific Island Countries (SPICs). In January 2009, after a decade of serotype 1 (DENV-1) circulation, the first cases of DENV-4 infection were reported in FP. Two months later a new epidemic emerged, occurring about 20 years after the previous circulation of DENV-4 in FP. In this study, we investigated the epidemiological and molecular characteristics of the introduction, spread and genetic microevolution of DENV-4 in FP. METHODOLOGY/PRINCIPAL FINDINGS: Epidemiological data suggested that recent transmission of DENV-4 in FP started in the Leeward Islands and this serotype quickly displaced DENV-1 throughout FP. Phylogenetic analyses of the nucleotide sequences of the envelope (E) gene of 64 DENV-4 strains collected in FP in the 1980s and in 2009-2010, and some additional strains from other SPICs showed that DENV-4 strains from the SPICs were distributed into genotypes IIa and IIb. Recent FP strains were distributed into two clusters, each comprising viruses from other but distinct SPICs, suggesting that emergence of DENV-4 in FP in 2009 resulted from multiple introductions. Otherwise, we observed that almost all strains collected in the SPICs in the 1980s exhibit an amino acid (aa) substitution V287I within domain I of the E protein, and all recent South Pacific strains exhibit a T365I substitution within domain III. CONCLUSIONS/SIGNIFICANCE: This study confirmed the cyclic re-emergence and displacement of DENV serotypes in FP. Otherwise, our results showed that specific aa substitutions on the E protein were present on all DENV-4 strains circulating in SPICs. These substitutions probably acquired and subsequently conserved could reflect a founder effect to be associated with epidemiological, geographical, eco-biological and social specificities in SPICs.

Phylodynamic analysis of the emergence and epidemiological impact of transmissible defective dengue viruses

Intra-host sequence data from RNA viruses have revealed the ubiquity of defective viruses in natural viral populations, sometimes at surprisingly high frequency. Although defective viruses have long been known to laboratory virologists, their relevance in clinical and epidemiological settings has not been established. The discovery of long-term transmission of a defective lineage of dengue virus type 1 (DENV-1) in Myanmar, first seen in 2001, raised important questions about the emergence of transmissible defective viruses and their role in viral epidemiology. By combining phylogenetic analyses and dynamical modelling, we investigate how evolutionary and ecological processes at the intra-host and inter-host scales shaped the emergence and spread of the defective DENV-1 lineage. We show that this lineage of defective viruses emerged between June 1998 and February 2001, and that the defective virus was transmitted primarily through co-transmission with the functional virus to uninfected individuals. We provide evidence that, surprisingly, this co-transmission route has a higher transmission potential than transmission of functional dengue viruses alone. Consequently, we predict that the defective lineage should increase overall incidence of dengue infection, which could account for the historically high dengue incidence reported in Myanmar in 2001-2002. Our results show the unappreciated potential for defective viruses to impact the epidemiology of human pathogens, possibly by modifying the virulence-transmissibility trade-off, or to emerge as circulating infections in their own right. They also demonstrate that interactions between viral variants, such as complementation, can open new pathways to viral emergence.

Technological innovation and operational effectiveness : their role in achieving performance improvements

The purpose of this article is to examine the role of the alignment between technological innovation effectiveness and operational effectiveness after the implementation of enterprise information systems, and the impact of this alignment on the improvement in operational performance. Confirmatory factor analysis was used to examine structural relationships between the set of observed variables and the set of continuous latent variables. The findings from this research suggest that the dimensions stemming from technological innovation effectiveness such as system quality, information quality, service quality, user satisfaction and the performance objectives stemming from operational effectiveness such as cost, quality, reliability, flexibility and speed are important and significantly well-correlated factors. These factors promote the alignment between technological innovation effectiveness and operational effectiveness and should be the focus for managers in achieving effective implementation of technological innovations. In addition, there is a significant and direct influence of this alignment on the improvement of operational performance. The principal limitation of this study is that the findings are based on investigation of small sample size.

Impact of Wolbachia on infection with chikungunya and yellow fever viruses in the mosquito vector Aedes aegypti

Incidence of disease due to dengue (DENV), chikungunya (CHIKV) and yellow fever (YFV) viruses is increasing in many parts of the world. The viruses are primarily transmitted by Aedes aegypti, a highly domesticated mosquito species that is notoriously difficult to control. When transinfected into Ae. aegypti, the intracellular bacterium Wolbachia has recently been shown to inhibit replication of DENVs, CHIKV, malaria parasites and filarial nematodes, providing a potentially powerful biocontrol strategy for human pathogens. Because the extent of pathogen reduction can be influenced by the strain of bacterium, we examined whether the wMel strain of Wolbachia influenced CHIKV and YFV infection in Ae. aegypti. Following exposure to viremic blood meals, CHIKV infection and dissemination rates were significantly reduced in mosquitoes with the wMel strain of Wolbachia compared to Wolbachia-uninfected controls. However, similar rates of infection and dissemination were observed in wMel infected and non-infected Ae. aegypti when intrathoracic inoculation was used to deliver virus. YFV infection, dissemination and replication were similar in wMel-infected and control mosquitoes following intrathoracic inoculations. In contrast, mosquitoes with the wMelPop strain of Wolbachia showed at least a 10(4) times reduction in YFV RNA copies compared to controls. The extent of reduction in virus infection depended on Wolbachia strain, titer and strain of the virus, and mode of exposure. Although originally proposed for dengue biocontrol, our results indicate a Wolbachia-based strategy also holds considerable promise for YFV and CHIKV suppression.

Digital soapboxes : towards an interaction design agenda for situated civic innovation

We argue that there are at least two significant issues for interaction designers to consider when creating the next generation of human interfaces for civic and urban engagement: (1) The disconnect between citizens participating in either digital or physical realms has resulted in a neglect of the hybrid role that public place and situated technology can play in contributing to civic innovation. (2) Under the veneer of many social media tools, hardly any meaningful strategies or approaches are found that go beyond awareness raising and allow citizens to do more than clicking a ‘Like’ button. We call for an agenda to design the next generation of ‘digital soapboxes’ that contributes towards a new form of polity helping citizens not only to have a voice but also to appropriate their city in order to take action for change.

An overview of level I evidence for the management of radiation dermatitis literature

Background: Despite the technologic advances, radiation dermatitis is still a prevalent and distressing symptom in patients with cancer undergoing radiotherapy. Systematic reviews (SRs) are regarded as level I evidence providing direction for clinical practice and guidelines. This overview aims to provide a critical appraisal of SRs published on interventions for the prevention/management of radiation dermatitis. Methodology: We searched the following electronic databases: MEDLINE, CINAHL, EMBASE, and the Cochrane Library (up to Feb 2012). We also hand-searched reference lists of potentially eligible articles and a number of key journals in the area. Two authors screened all potential articles and included eligible SRs. Two authors critically appraised and extracted key findings from the included reviews using the “A Measurement Tool to Assess Systematic Reviews” (AMSTAR). Results: Of 1837 potential titles, six SRs were included. A number of interventions have been reported to be potentially beneficial for managing radiation dermatitis. Interventions evaluated in these reviews included skin care advice, steroidal/non-steroidal topical agents, systematic therapies, modes of radiation delivery, and dressings. However, all the included SRs reported that there is insufficient evidence supporting any single effective intervention. The methodological quality of the included studies varied, and methodological shortfalls in these reviews may create biases to the overall results or recommendations for clinical practice. Conclusions and implications: An up-to-date high quality SR in preventing/managing radiation dermatitis is needed to guide practice and direction for future research. Clinicians or guideline developers are recommended to critically evaluate the information of SRs in their decision making.

Determinants of regional innovation capacity in China

Since the 1980s, when the concept of innovation systems(IS) was first presented(Freeman, 2004), a large body of work has been done on IS. IS is a framework that consists of elements related to innovation activities, such as innovation actors,institutional environments, and the relationship between those elements (Lundvall,1992; Nelson, 1993). Studies on NIS/RIS aim to understand the structures and dynamics of IS (Lundvall, 1992; Nelson, 1993), mainly through case studies and comparative case studies(Archibugi, 1996; MacDowall, 1984; Mowery, 1998;Radosevic, 2000). Research on IS has extended from the national level (NIS) to the regional level (RIS) (Cooke, Uranga, & Etxebarria, 1997; Cooke, Uranga, & Etxebarria, 1998), and from developed economies to developing economies. RIS is vital, especially for a large and diverse countries(Edquist, 2004) like China. More recently, based on the literature of NIS, Furman, Porter and Scott (2002)introduced the framework of national innovation capacity (NIC), which employs a quantitative approach to understanding to what degree elements of NIS impact on innovation capacity. Regional innovation capacity (RIC) is the adaption of NIC at the regional level. Although regional level research is important there is limited work done on RIC and there is even less in transitional economies, which are different to developed countries. To better understand RIC in transitional countries this thesis conducted a study of 30 administrative regions in Mainland China between 1991 and 2005. To establish the key factors driving RIC in China the study explored the impact of three elements in the innovation system;(a) innovation actors, (b) innovation inputs, and (c)international and domestic innovation system interactions.

Collaborative governance and innovation in social enterprises

While social enterprises have gained increasing policy attention as vehicles for generating innovative responses to complex social and environmental problems, surprisingly little is known about them. In particular, the social innovation produced by social enterprises (Mulgan, Tucker, Ali, & Sander, 2007) has been presumed rather than demonstrated, and remains under-investigated in the literature. While social enterprises are held to be inherently innovative as they seek to response to social needs (Nicholls, 2010), there has been conjecture that the collaborative governance arrangements typical in social enterprises may be conducive to innovation (Lumpkin, Moss, Gras, Kato, & Amezcua, In press), as members and volunteers provide a source of creative ideas and are unfettered in such thinking by responsibility to deliver organisational outcomes (Hendry, 2004). However this is complicated by the sheer array of governance arrangements which exist in social enterprises, which range from flat participatory democratic structures through to hierarchical arrangements. In continental Europe, there has been a stronger focus on democratic participation as a characteristic of Social Enterprises than, for example, the USA. In response to this gap in knowledge, a research project was undertaken to identify the population of social enterprises in Australia. The size, composition and the social innovations initiated by these enterprises has been reported elsewhere (see Barraket, 2010). The purpose of this paper is to undertake a closer examination of innovation in social enterprises – particularly how the collaborative governance of social enterprises might influence innovation. Given the pre-paradigmatic state of social entrepreneurship research (Nicholls, 2010), and the importance of drawing draw on established theories in order to advance theory (Short, Moss, & Lumpkin, 2009), a number of conceptual steps are needed in order to examine how collaborative governance might influence by social enterprises. In this paper, we commence by advancing a definition as to what a social enterprise is. In light of our focus on the potential role of collaborative governance in social innovation amongst social enterprises, we go on to consider the collaborative forms of governance prevalent in the Third Sector. Then, collaborative innovation is explored. Drawing on this information and our research data, we finally consider how collaborative governance might affect innovation amongst social enterprises.

Towards a theoretical framework for organizational innovation

Being able to innovate has become a critical capability for many contemporary organizations in an effort to sustain their operations in the long run. However, existing innovation models that attempt to guide organizations emphasize different aspects of innovation (e.g., products, services or business models), different stages of innovation (e.g., ideation, implementation or operation) or different skills (e.g., development or crowdsourcing) that are necessary to innovate, in turn creating isolated pockets of understanding about different aspects of innovation. In order to yield more predictable innovation outcomes organizations need to understand what exactly they need to focus on, what capabilities they need to have and what is necessary in order to take an idea to market. This paper aims at constructing a framework for innovation that contributes to this understanding. We will focus on a number of different stages in the innovation process and highlight different types and levels of organizational, technological, individual and process capabilities required to manage the organizational innovation process. Our work offers a comprehensive conceptualization of innovation as a multi-level process model, and provides a range of implications for further empirical and theoretical examination.

Building contemporary urban spaces of knowledge and innovation : Lessons from Australian practice

In the era of global knowledge economy, urban regions that are seeking to increase their competitive edge, become destinations for talent and investment, and provide prosperity and quality of life to their inhabitants have little chance achieving their development goals without forming effective knowledge-based urban development strategies. This paper aims to shed light on the planning and development of the knowledge-based urban development phenomenon with respect to the construction of knowledge community precincts aimed at building contemporary urban spaces of knowledge and innovation. Following to a thorough review of the literature on knowledge-based urban development, the paper undertakes policy and best practice analyses to learn from the internationally renowned Australian knowledge community precincts, from Sydney, Melbourne and Brisbane, to better understand the dynamics of knowledge community precinct development practices. The paper provides a discussion on the study findings and recommendations for successfully establishing contemporary urban spaces of knowledge and innovation.

Reorganizing a technical services division using collaborative evidence based information practice at Auraria Library

The article focuses on the evidence-based information practice (EBIP) applied at the Auraria Library in Denver, Colorado during the reorganization of its technical services division. Collaboration processes were established for the technical services division through the reorganization and redefinition of workflows. There are several factors that form part of the redefinition of roles including personal interests, department needs, and library needs. A collaborative EBIP environment was created in the division by addressing issues of workplace hierarchies, by the distribution of problem solving, and by the encouragement of reflective dialogue.

The development of Monte Carlo techniques for the verification of radiotherapy treatments

Introduction: Recent advances in the planning and delivery of radiotherapy treatments have resulted in improvements in the accuracy and precision with which therapeutic radiation can be administered. As the complexity of the treatments increases it becomes more difficult to predict the dose distribution in the patient accurately. Monte Carlo (MC) methods have the potential to improve the accuracy of the dose calculations and are increasingly being recognised as the ‘gold standard’ for predicting dose deposition in the patient [1]. This project has three main aims: 1. To develop tools that enable the transfer of treatment plan information from the treatment planning system (TPS) to a MC dose calculation engine. 2. To develop tools for comparing the 3D dose distributions calculated by the TPS and the MC dose engine. 3. To investigate the radiobiological significance of any errors between the TPS patient dose distribution and the MC dose distribution in terms of Tumour Control Probability (TCP) and Normal Tissue Complication Probabilities (NTCP). The work presented here addresses the first two aims. Methods: (1a) Plan Importing: A database of commissioned accelerator models (Elekta Precise and Varian 2100CD) has been developed for treatment simulations in the MC system (EGSnrc/BEAMnrc). Beam descriptions can be exported from the TPS using the widespread DICOM framework, and the resultant files are parsed with the assistance of a software library (PixelMed Java DICOM Toolkit). The information in these files (such as the monitor units, the jaw positions and gantry orientation) is used to construct a plan-specific accelerator model which allows an accurate simulation of the patient treatment field. (1b) Dose Simulation: The calculation of a dose distribution requires patient CT images which are prepared for the MC simulation using a tool (CTCREATE) packaged with the system. Beam simulation results are converted to absolute dose per- MU using calibration factors recorded during the commissioning process and treatment simulation. These distributions are combined according to the MU meter settings stored in the exported plan to produce an accurate description of the prescribed dose to the patient. (2) Dose Comparison: TPS dose calculations can be obtained using either a DICOM export or by direct retrieval of binary dose files from the file system. Dose difference, gamma evaluation and normalised dose difference algorithms [2] were employed for the comparison of the TPS dose distribution and the MC dose distribution. These implementations are spatial resolution independent and able to interpolate for comparisons. Results and Discussion: The tools successfully produced Monte Carlo input files for a variety of plans exported from the Eclipse (Varian Medical Systems) and Pinnacle (Philips Medical Systems) planning systems: ranging in complexity from a single uniform square field to a five-field step and shoot IMRT treatment. The simulation of collimated beams has been verified geometrically, and validation of dose distributions in a simple body phantom (QUASAR) will follow. The developed dose comparison algorithms have also been tested with controlled dose distribution changes. Conclusion: The capability of the developed code to independently process treatment plans has been demonstrated. A number of limitations exist: only static fields are currently supported (dynamic wedges and dynamic IMRT will require further development), and the process has not been tested for planning systems other than Eclipse and Pinnacle. The tools will be used to independently assess the accuracy of the current treatment planning system dose calculation algorithms for complex treatment deliveries such as IMRT in treatment sites where patient inhomogeneities are expected to be significant. Acknowledgements: Computational resources and services used in this work were provided by the HPC and Research Support Group, Queensland University of Technology, Brisbane, Australia. Pinnacle dose parsing made possible with the help of Paul Reich, North Coast Cancer Institute, North Coast, New South Wales.

A conversation approach to business model innovation

Sense making through conversation plays a key role in channelling and furthering participatory business model innovation. The designer as facilitator, with conversation as a core tool, is an emerging area of interest within the design research literature. This paper will discuss preliminary findings of a case study of Second Road, a strategy and innovation consultancy that employed a design thinking approach and conversational methods to redesign a client’s business development model. Through this study conversation based co-creation emerged as the primary method for participatory innovation.