Otimização do Funcionamento da ETAR das Termas de S. Vicente, Penafiel

A água é um recurso natural único, escasso e essencial a todos os seres vivos, o que a torna um bem de extrema importância. Nos dias de hoje, o desperdício deste bem, aliado ao aumento da sua procura, tornou-se um problema devido à decrescente disponibilidade de água doce no nosso planeta. Todas as águas que rejeitamos depois da sua utilização para diversos fins, designadas de águas residuais, necessitam de tratamento antes de serem devolvidas ao meio ambiente. O seu tratamento é realizado numa Estação de Tratamento de Águas Residuais (ETAR) e o processo de tratamento depende das suas características. A ETAR das Termas de S. Vicente, em Penafiel, trabalha no seu limite de capacidade, apresenta uma sobrecarga hidráulica gerada por uma afluência de águas pluviais e o processamento das lamas geradas não permite uma secagem tão completa como seria desejável. Assim, este trabalho teve como objetivo o estudo do funcionamento desta ETAR com a finalidade de propor soluções que o possam otimizar. As soluções propostas para otimizar o funcionamento da ETAR em estudo são: i) a substituição de grades de limpeza manual por grades de limpeza automática de forma a reduzir a necessidade da intervenção do operador ao nível da remoção e condicionamento dos gradados; ii) a construção de um desarenador arejado que além de remover areias de diâmetro superior a 0,2 mm promove também a remoção de gorduras, protegendo desta forma os equipamentos a jusante da abrasão/desgaste prematuros e reduzindo a formação de depósitos nas tubagens; iii) a construção de um tanque de equalização de forma a garantir uma distribuição mais uniforme dos caudais e da carga poluente; iv) a substituição do enchimento do leito percolador por um meio de suporte plástico que permite atingir melhores eficiências de remoção neste tratamento biológico; v) a alteração do agente de desinfeção para radiação ultravioleta, evitando a adição de produtos químicos na água residual e possível formação de subprodutos prejudiciais ao ambiente, como ocorreria no caso da cloragem; e vi) a substituição da desidratação de lamas em leitos de secagem por filtros de banda, que é um processo mais rápido, que ocupa menos espaço e permite atingir elevadas eficiências de remoção de humidade. Para cada uma das sugestões são apresentadas as correspondentes especificações técnicas e dimensionamento. As sugestões de melhoria apresentadas neste trabalho constituem uma alternativa mais económica do que a ampliação da ETAR, que genericamente corresponde à duplicação da linha de tratamento atual. Devido à menor complexidade em termos de construção, estas sugestões podem vir a ser implementadas num futuro próximo, prolongando assim um pouco mais a vida útil da ETAR atual.

Contribution to the geology of Thailand and implications for the geodynamic evolution of Southeast Asia

Abstract The purpose of this study is to unravel the geodynamic evolution of Thailand and, from that, to extend the interpretation to the rest of Southeast Asia. The methodology was based in a first time on fieldwork in Northern Thailand and Southernmost Myanmar, using a multidisciplinary approach, and then on the compilation and re-interpretation, in a plate tectonics point of view, of existing data about the whole Southeast Asia. The main results concern the Nan-Uttaradit suture, the Chiang Mai Volcanic Belt and the proposition of a new location for the Palaeotethys suture. This led to the establishment of a new plate tectonic model for the geodynamic evolution of Southeast Asia, implying the existence new terranes (Orang Laut and the redefinition of Shan-Thai) and the role of the Palaeopacific Ocean in the tectonic development of the area. The model proposed here considers the Palaeotethys suture as located along the Tertiary Mae Yuam Fault, which represents the divide between the Cimmerian Sibumasu terrane and the Indochina-derived Shan-Thai block. The term Shan-Thai, previously used to define the Cimmerian area (when the Palaeotethys suture was thought to represented by the Nan-Uttaradit suture), was redefined here by keeping its geographical location within the Shan States of Myanmar and Central-Northern Thailand, but attributing it an East Asian Origin. Its detachment from Indochina was the result of the Early Permian opening of the Nan basin. The Nan basin closed during the Middle Triassic, before the deposition of Carnian-Norian molasse. The modalities of the closure of the basin imply a first phase of Middle Permian obduction, followed by final eastwards subduction. The Chiang Mai Volcanic Belt consists of scattered basaltic rocks erupted at least during the Viséan in an extensional continental intraplate setting, on the Shan-Thai part of the Indochina block. The Viséan age was established by the dating of limestone stratigraphically overlying the basalts. In several localities of the East Asian Continent, coeval extensional features occur, possibly implying one or more Early Carboniferous extensional events at a regional scale. These events occurred either due to the presence of a mantle plume or to the roll-back of the Palaeopacific Ocean, subducting beneath Indochina and South China, or both. The Palaeopacific Ocean is responsible, during the Early Permian, for the opening of the Song Ma and Poko back-arcs (Vietnam) with the consequent detachment of the Orang Laut Terranes (Eastern Vietnam, West Sumatra, Kalimantan, Palawan, Taiwan). The Late Triassic/Early Jurassic closure of the Eastern Palaeotethys is considered as having taken place by subduction beneath its southern margin (Gondwana), due to the absence of Late Palaeozoic arc magmatism on its northern (Indochinese) margin and the presence of volcanism on the Cimmerian blocks (Mergui, Lhasa). Résumé Le but de cette étude est d'éclaircir l'évolution géodynamique de la Thaïlande et, à partir de cela, d'étendre l'interprétation au reste de l'Asie du Sud-Est. La méthodologie utilisée est basée dans un premier temps sur du travail de terrain en Thaïlande du nord et dans l'extrême sud du Myanmar, en se basant sur une approche pluridisciplinaire. Dans un deuxième temps, la compilation et la réinterprétation de données préexistantes sur l'Asie du Sud-est la été faite, dans une optique basée sur la tectonique des plaques. Les principaux résultats de ce travail concernent la suture de Nan-Uttaradit, la « Chiang Mai Volcanic Belt» et la proposition d'une nouvelle localité pour la suture de la Paléotethys. Ceci a conduit à l'établissement d'un nouveau modèle pour l'évolution géodynamique de l'Asie du Sud-est, impliquant l'existence de nouveaux terranes (Orang Laut et Shan-Thai redéfini) et le rôle joué par le Paléopacifique dans le développement tectonique de la région. Le modèle présenté ici considère que la suture de la Paléotethys est située le long de la faille Tertiaire de Mae Yuam, qui représente la séparation entre le terrain Cimmérien de Sibumasu et le bloc de Shan-Thai, d'origine Indochinoise. Le terme Shan-Thai, anciennement utilise pour définir le bloc Cimmérien (quand la suture de la Paléotethys était considérée être représentée par la suture de Nan-Uttaradit), a été redéfini ici en maintenant sa localisation géographique dans les états Shan du Myanmar et la Thaïlande nord-centrale, mais en lui attribuant une origine Est Asiatique. Son détachement de l'Indochine est le résultat de l'ouverture du basin de Nan au Permien Inférieur. Le basin de Nan s'est fermé pendant le Trias Moyen, avant le dépôt de molasse Carnienne-Norienne. Les modalités de fermeture du basin invoquent une première phase d'obduction au Permien Moyen, suivie par une subduction finale vers l'est. La "Chiang Mai Volcanic Belt" consiste en des basaltes éparpillés qui ont mis en place au moins pendant le Viséen dans un contexte extensif intraplaque continental sur la partie de l'Indochine correspondant au bloc de Shan-Thai. L'âge Viséen a été établi sur la base de la datation de calcaires qui surmontent stratigraphiquement les basaltes. Dans plusieurs localités du continent Est Asiatique, des preuves d'extension plus ou moins contemporaines ont été retrouvées, ce qui implique l'existence d'une ou plusieurs phases d'extension au Carbonifère Inférieur a une échelle régionale. Ces événements sont attribués soit à la présence d'un plume mantellique, ou au rollback du Paléopacifique, qui subductait sous l'Indochine et la Chine Sud, soit les deux. Pendant le Permien inférieur, le Paléopacifique est responsable pour l'ouverture des basins d'arrière arc de Song Ma et Poko (Vietnam), induisant le détachement des Orang Laut Terranes (Est Vietnam, Ouest Sumatra, Kalimantan, Palawan, Taiwan). La fermeture de la Paléotethys Orientale au Trias Supérieur/Jurassique Inférieur est considérée avoir eu lieu par subduction sous sa marge méridionale (Gondwana), à cause de l'absence de magmatisme d'arc sur sa marge nord (Indochinoise) et de la présence de volcanisme sur les blocs Cimmériens de Lhassa et Sibumasu (Mergui). Résumé large public L'histoire géologique de l'Asie du Sud-est depuis environ 430 millions d'années a été déterminée par les collisions successives de plusieurs continents les uns avec les autres. Il y a environ 430 millions d'années, au Silurien, un grand continent appelé Gondwana, a commencé à se «déchirer» sous l'effet des contraintes tectoniques qui le tiraient. Cette extension a provoqué la rupture du continent et l'ouverture d'un grand océan, appelé Paléotethys, éloignant les deux parties désormais séparées. C'est ainsi que le continent Est Asiatique, composé d'une partie de la Chine actuelle, de la Thaïlande, du Myanmar, de Sumatra, du Vietnam et de Bornéo a été entraîné avec le bord (marge) nord de la Paléotethys, qui s'ouvrait petit à petit. Durant le Carbonifère Supérieur, il y a environ 300 millions d'années, le sud du Gondwana subissait une glaciation, comme en témoigne le dépôt de sédiments glaciaires dans les couches de cet âge. Au même moment le continent Est Asiatique se trouvait à des latitudes tropicales ou équatoriales, ce qui permettait le dépôt de calcaires contenant différents fossiles de foraminifères d'eau chaude et de coraux. Durant le Permien Inférieur, il y a environ 295 millions d'années, la Paléotethys Orientale, qui était un relativement vieil océan avec une croûte froide et lourde, se refermait. La croûte océanique a commencé à s'enfoncer, au sud, sous le Gondwana. C'est ce que l'on appelle la subduction. Ainsi, le Gondwana s'est retrouvé en position de plaque supérieure, par rapport à la Paléotethys qui, elle, était en plaque inférieure. La plaque inférieure en subductant a commencé à reculer. Comme elle ne pouvait pas se désolidariser de la plaque supérieure, en reculant elle l'a tirée. C'est le phénomène du «roll-back ». Cette traction a eu pour effet de déchirer une nouvelle fois le Gondwana, ce qui a résulté en la création d'un nouvel Océan, la Neotethys. Cet Océan en s'ouvrant a déplacé une longue bande continentale que l'on appelle les blocs Cimmériens. La Paléotethys était donc en train de se fermer, la Neotethys de s'ouvrir, et entre deux les blocs Cimmériens se rapprochaient du Continent Est Asiatique. Pendant ce temps, le continent Est Asiatique était aussi soumis à des tensions tectoniques. L'Océan Paléopacifique, à l'est de celui-ci, était aussi en train de subducter. Cette subduction, par roll-back, a déchiré le continent en détachant une ligne de microcontinents appelés ici « Orang Laut Terranes », séparés du continent par deux océans d'arrière arc : Song Ma et Poko. Ceux-ci sont composés de Taiwan, Palawan, Bornéo ouest, Vietnam oriental, et la partie occidentale de Sumatra. Un autre Océan s'est ouvert pratiquement au même moment dans le continent Est Asiatique : l'Océan de Nan qui, en s'ouvrant, a détaché un microcontinent appelé Shan-Thai. La fermeture de l'Océan de Nan, il y a environ 230 millions d'années a resolidarisé Shan-Thai et le continent Est Asiatique et la trace de cet événement est aujourd'hui enregistrée dans la suture (la cicatrice de l'Océan) de Nan-Uttaradit. La cause de l'ouverture de l'Océan de Nan peut soit être due à la subduction du Paléopacifique, soit aux fait que la subduction de la Paléotethys tirait le continent Est Asiatique par le phénomène du « slab-pull », soit aux deux. La subduction du Paléopacifique avait déjà crée de l'extension dans le continent Est Asiatique durant le Carbonifère Inférieur (il y a environ 340-350 millions d'années) en créant des bassins et du volcanisme, aujourd'hui enregistré en différents endroits du continent, dont la ceinture volcanique de Chiang Mai, étudiée ici. A la fin du Trias, la Paléotethys se refermait complètement, et le bloc Cimmérien de Sibumasu entrait en collision avec le continent Est Asiatique. Comme c'est souvent le cas avec les grands océans, il n'y a pas de suture proprement dite, avec des fragments de croûte océanique, pour témoigner de cet évènement. Celui-ci est visible grâce à la différence entre les sédiments du Carbonifère Supérieur et du Permieñ Inférieur de chaque domaine : dans le domaine Cimmérien ils sont de type glaciaire alors que dans le continent Est Asiatique ils témoignent d'un climat tropical. Les océans de Song Ma et Poko se sont aussi refermés au Trias, mais eux ont laissé des sutures visibles

The role of a transcrustal shear zone in orogenic gold mineralization at the Aijanahalli Mine, Dharwar Craton, South India

The Ajjanahalli gold mine is spatially associated with a Late Archean craton-scale shear zone in the eastern Chitradurga greenstone belt of the Dharwar craton, India. Gold mineralization is hosted by an similar to100-m-wide antiform in a banded iron formation. Original magnetite and siderite are replaced by a peak metamorphic alteration assemblage of chlorite, stilpnomelane, minnesotaite, sericite, ankerite, arsenopyrite, pyrite, pyrrhotite, and gold at ca. 300degrees to 350degreesC. Elements enriched in the banded iron formation include Ca, Mg, C, S, An, As, Bi. Cu, Sb, Zn, Pb, Se, Ag, and Te, whereas in the wall rocks As, Cu, Zn, Bi, Ag, and An are only slightly enriched. Strontium correlates with CaO, MgO, CO2, and As, which indicates cogenetic formation of arsenopyrite and Mg-Ca carbonates. The greater extent of alteration in the Fe-rich banded iron formation layers than in the wall rock reflects the greater reactivity of the banded iron formation layers. The ore fluids, as interpreted from their isotopic composition (delta(18)O = 6.5-8.5parts per thousand; initial Sr-87/Sr-86 = 0.7068-0.7078), formed by metamorphic devolatilization of deeper levels of the Chitradurga greenstone belt. Arsenopyrite, chalcopyrite, and pyrrhotite have delta(34)S values within a narrow range between 2.1 and 2.7 per mil, consistent with a sulfur source in Chitradurga greenstone belt lithologies. Based on spatial and temporal relationships between mineralization, local structure development, and sinistral strike-slip deformation in the shear zone at the eastern contact of the Chitradurga greenstone belt, we suggest that the Ajjanahalli gold mineralization formed by fluid infiltration into a low strain area within the first-order structure. The ore fluids were transported along this shear zone into relatively shallow crustal levels during lateral terrane accretion and a change from thrust to transcurrent tectonics. Based on this model of fluid flow, exploration should focus on similar low strain areas or potentially connected higher order splays of the first-order shear zone.

Modeling of in-situ crystallization processes in the Permian mafic layered intrusion of Mont Collon (Dent Blanche nappe, western Alps)

The Mont Collon mafic complex is one of the best preserved examples of the Early Permian magmatism in the Central Alps, related to the intra-continental collapse of the Variscan belt. It mostly consists (> 95 vol.%) of ol+hy-nonnative plagioclase-wehrlites, olivine- and cpx-gabbros with cumulitic structures, crosscut by acid dikes. Pegmatitic gabbros, troctolites and anorthosites outcrop locally. A well-preserved cumulative, sequence is exposed in the Dents de Bertol area (center of intrusion). PT-calculations indicate that this layered magma chamber emplaced at mid-crustal levels at about 0.5 GPa and 1100 degrees C. The Mont Collon cumulitic rocks record little magmatic differentiation, as illustrated by the restricted range of clinopyroxene mg-number (Mg#(cpx)=83-89). Whole-rock incompatible trace-element contents (e.g. Nb, Zr, Ba) vary largely and without correlation with major-element composition. These features are characteristic of an in-situ crystallization process with variable amounts of interstitial liquid L trapped between the cumulus mineral phases. LA-ICPMS measurements show that trace-element distribution in the latter is homogeneous, pointing to subsolidus re-equilibration between crystals and interstitial melts. A quantitative modeling based on Langmuir's in-situ crystallization equation successfully duplicated the REE concentrations in cumulitic minerals of all rock facies of the intrusion. The calculated amounts of interstitial liquid L vary between 0 and 35% for degrees of differentiation F of 0 to 20%, relative to the least evolved facies of the intrusion. L values are well correlated with the modal proportions of interstitial amphibole and whole-rock incompatible trace-element concentrations (e.g. Zr, Nb) of the tested samples. However, the in-situ crystallization model reaches its limitations with rock containing high modal content of REE-bearing minerals (i.e. zircon), such as pegmatitic gabbros. Dikes of anorthositic composition, locally crosscutting the layered lithologies, evidence that the Mont Collon rocks evolved in open system with mixing of intercumulus liquids of different origins and possibly contrasting compositions. The proposed model is not able to resolve these complex open systems, but migrating liquids could be partly responsible for the observed dispersion of points in some correlation diagrams. Absence of significant differentiation with recurrent lithologies in the cumulitic pile of Dents de Bertol points to an efficiently convective magma chamber, with possible periodic replenishment, (c) 2005 Elsevier B.V. All rights reserved.

An interpretation of the deep seismic lines from the Penninic Alps of Valais (Switzerland)

The upper part of three deep seismic lines running across the Penninic Swiss Alps of Valais have been studied. Numerous reflectors illustrate the nappe structure of this internal part of the orogen. These reflectors, even at great depths (20-25 km), can be correlated with outcropping geological features and are most likely produced by lithological boundaries rather than by mylonites zones, which are hardly reflective in such an environment. Our interpretations, largely constrained by projections of the outcropping geology, have improved our knowledge of the deep structure of this segment of the Alpine belt, enhancing the importance of the backfolding and the crustal scale deformation phase which produced the Rawil-Valpelline depression and the Aar-Toce culmination. Furthermore we have here the possibility of correlating seismic patterns produced by ductile folds with the outcropping structures.

Generation of polycyclic aromatic hydrocarbons (PAHs) during woodworking operations.

Occupational exposures to wood dust have been associated with an elevated risk of sinonasal cancer (SNC). Wood dust is recognized as a human carcinogen but the specific cancer causative agent remains unknown. One possible explanation is a co-exposure to; wood dust and polycyclic aromatic hydrocarbons (PAHs). PAHs could be generated during incomplete combustion of wood due to heat created by use of power tools. To determine if PAHs are generated from wood during common wood working operations, PAH concentrations in wood dust samples collected in an experimental chamber operated under controlled conditions were analyzed. In addition, personal air samples from workers exposed to wood dust (n = 30) were collected. Wood dust was generated using three different power tools: vibrating sander, belt sander, and saw; and six wood materials: fir, Medium Density Fiberboard (MDF), beech, mahogany, oak and wood melamine. Monitoring of wood workers was carried out by means of personal sampler device during wood working operations. We measured 21 PAH concentrations in wood dust samples by capillary gas chromatography-ion trap mass spectrometry (GC-MS). Total PAH concentrations in wood dust varied greatly (0.24-7.95 ppm) with the lowest being in MDF dust and the highest in wood melamine dust. Personal PAH exposures were between 37.5-119.8 ng m(-3) during wood working operations. Our results suggest that PAH exposures are present during woodworking operations and hence could play a role in the mechanism of cancer induction related to wood dust exposure.

Petrography and geochemistry of the McArthur Township area, Ontario /

The McArthur Township area in the Archean Abitibi Belt of northeast Ontario contains northwesterly trending volcanic rocks which are located on a limb of a large syncline. The axial trace of the syncline passes through the adjacent Douglas Township. The Archean volcanic rocks and associated sedimentary rocks are intruded and deformed by two large plutons and a few smaller hypabyssal intrusions. A petrographic and geochemical study of the Precambrian rocks exposed 1n the study area was undertaken in order to investigate the metamorphic grade and geochemical characteristics of the rocks. All the samples were studied with the microscope and analysis of 20 major and trace elements were determined on a selection of the less altered specimens by x-ray fluorescence. Three different periods of igneous activity have occurred in the study area. The first two periods were dominated by volcanic extrusive rocks accompanied by gabbroic sills. The third cycle is the diapiric intrusion of the granitic plutons and subsequent metamorphism of the older rocks to the low to medium grade. Two periods of sedimentation are also recognized in the study area which occurred after the first and second cycle of volcanism. Chemically, the lavas are subdivided into three main associations: (1) The komatiitic association is characterized by high MgO, high Ni, low Ti02 and a low FeO*/(FeO* + MgO) ratio. They occupy the base of each volcanic cycle and some of the flows exhibit spinifex textures. (2) The tholeiitic association displays distinct iron and titanium enrichment trends in the intermediate membersor -i r (3) The calc-alkaline association contains low FeO* and TI02 and high Ni contents relative to modern calc-alkaline types. They are formed at the end of each cycle of volcanism and overlie the tholeiitic flows. All three associations of the first volcanic cycle are exposed in the study area, while the second cycle is represented by a komatiltic sequence. The volcanic rocks were possibly formed by multiple partial melting of the Archean mantle to produce parental magmas under various P - T conditions.

Structural analysis of the Paint Lake Deformation Zone, Northern Ontario /

The Paint Lake Deformation Zone (PLDZ), located within the Superior Province of Canada, demarcates a major structural and lithological break between the Onaman-Tashota Terrane to the north and the Beardmore-Geraldton Belt to the south. The PLDZ is an east-west trending lineament, approximately 50 km in length and up to 1 km in width, comprised of an early ductile component termed the Paint Lake Shear Zone and a late brittle component known as the Paint Lake Fault. Structures associated with PLDZ development including S-, C- and C'-fabrics, stretching lineations, slickensides, C-C' intersection lineations, Z-folds and kinkbands indicate that simple shear deformation dominated during a NW-SE compressional event. Movement along the PLDZ was in a dextral sense consisting of an early differential motion with southside- down and a later strike-slip motion. Although the locus of the PLDZ may in part be lithologically controlled, mylonitization which accompanied shear zone development is not dependent on the lithological type. Conglomerate, intermediate and mafic volcanic units exhibit similar mesoscopic and microscopic structures where transected by the PLDZ. Field mapping, supported by thin section analysis, defines five strain domains increasing in intensity of deformation from shear zone boundary to centre. A change in the dominant microstructural deformation mechanism from dislocation creep to diffusion creep is observed with increasing strain during mylonitization. C'-fabric development is temporally associated with this change. A decrease in the angular relationship between C- and C'-fabrics is observed upon attaining maximum strain intensity. Strain profiling of the PLDZ demonstrates the presence of an outer primary strain gradient which exhibits a simple profile and an inner secondary strain gradient which exhibits a more complex profile. Regionally metamorphosed lithologies of lower greenschist facies outside the PLDZ were subjected to retrograde metamorphism during deformation within the PLDZ.

Structural, stratigraphic and geochemical studies of the Horwood Peninsula - Gander Bay Area, Northeast Newfoundland /

The Horwood Peninsula - Gander Bay area is located at NE Newfoundland in the Botwood Zone (Williams et a1., 1974) or in the Dunnage Zone (Williams, 1979) of the Central Mobile Belt of the Newfoundland Appalachians. The area is underlain by Middle Ordovician to possible Lower Silurian rocks of the Davidsville and Indian Islands Groups, respectively. Three conformable formations named informally : the Mafic Volcanic Formation, the Greywacke and Siltstone Formation and the Black Slate Formation, have been recognized in the Davidsville Group. The Greywacke and the Black Slate Formations pass locally into a Melange Formation. From consideration of regional structure and abundant locally-derived mafic volcanic olisto- 1iths in the melange, it is considered to have originated by gravity sliding rather than thrusting. Four formations have been recognized in the Indian Islands Group. They mainly contain silty slate and phyllite, grey cherty siltstone, green to red micaceous siltstone and limestone horizons. Repetition of lithological units by F1 folding are well-demonstrated in one of formations in this Group. The major structure in this Group on the Horwood Peninsula is interpreted to be a synclinal complex. The lithology of this Group is different from the Botwood Group to the west and is probably Late Ordovician and/or Early Silurian in age. The effects of soft-sediment deformation can be seen from the lower part of the Davidsville Group to the middle part of the Indian Islands Group indicating continuous and/or episodic slumping and sliding activities throughout the whole area. However, no siginificant depOSitional and tectonic break that could be assigned to the Taconian Orogeny has been recognized in this study. Three periods of tectonic deformation were produced by the Acadian Orogeny. Double boudinage in thin dikes indicates a southeast-northwest sub-horizontal compression and main northeast-southwest sub-horizontal extension during the D1 deformation. A penetrative, axial planar slaty cleavage (Sl) and tight to isocJ.ina1 F1 folds are products of this deformation. The D2 and D3 deformations formed S2 and S3 fabrics associated with crenulations and kink bands which are well-shown in the slates and phyllites of the Indian Islands Group. The D2 and D3 deformations are the products of vertical and northeast-southwest horizontal shortening respectively. The inferred fault between the Ordovician slates (Davidsville Group) and the siltstones (Indian Islands Group) suggested by Williams (1963, 1964b, 1972, 1978) is absent. Formations can be followed without displacement across this inferred fault. Chemically, the pillow lavas, mafic agglomerates, tuff beds and diabase dikes are subdivided into three rock suites : (a) basaltic komatiite (Beaver Cove Assemblage), (b) tholeiitic basalt (diabase dikes), (c) alkaline basalt (Shoal Bay Assemblage). The high Ti02 , MgO, Ni contents and bimodal characteristic of the basaltic komatiite in the area are comparable to the Svartenhuk Peninsula at Baffin Bay and are interpreted to be the result of an abortive volcano-tectonic rift-zone in a rear-arc basin. Modal and chemical analyses of greywackes and siltstones show the trend of maturity of these rocks increasing from poorly sorted Ordovician greywackes to fairly well-sorted Silurian siltstones. Rock fragments in greywackes indicate source areas consisting of plagiogranite, low grade metamorphic rocks and ultramafic rocks. Rare sedimentary structures in both Groups indicate a southeasterly provenance. Trace element analyses of greywackes also reveal a possible island-arc affinity.

Proceedings of a court of inquiry, convened on board the United States frigate the President, in the harbour of New York, on the thirteenth day of August, 1811, pursuant to the following warrant : To Stephen Decatur, esquire, a captain in the Navy of the United States. --

Caption title.

Ontario Tender Fruit Grower’s Marketing Board Fonds, 1960, 1967, 1969-1977, 1980-1981, 1987

The Ontario Tender Fruit Marketing Board operates under the Farm Producers Marketing Act. It covers all tender fruit farmers who produce either fresh or canned products. Today the board has over 500 grower-members. Tender fruit in the Niagara region includes: peaches, pears, plums, grapes and cherries. The fruits are used in a number of different ways, from jams and jellies to desserts, sauces and wine. Peaches were first harvested along the Niagara river in 1779. Peter Secord (Laura Secord’s uncle) is thought to be the first farmer to plant fruit trees when he took a land grant near Niagara in the mid 1780s. Since the beginnings of Secord’s farm, peaches, pears and plums have been grown in the Niagara region ever since. However, none of the original varities of peach trees remain today. Peaches were often used for more than eating by early settlers. The leaves and bark of the tree was used to make teas for conditions such as chronic bronchitis, coughs and gastritis. Cherries have been known to have anti-inflammatory and pain relieving properties. Like peaches and cherries, pears had many uses for the early pioneers. The wood was used to make furniture. The juice made excellent ciders and the leaves provided yellow dyes. Plums have been around for centuries, not only in the Niagara region, but throughout the world. They have appeared in pre-historic writings and were present for the first Thanksgiving in 1621. The grape industry in Ontario has also been around for centuries. It began in 1798 when land was granted to Major David Secord (brother-in-law to Laura Secord) slightly east of St. David’s, on what is Highway No. 8 today. Major Secord’s son James was given a part of the land in 1818 and in 1857 passed it onto Porter Adams. Adams is known to be the first person to plant grapes in Ontario1. Tender fruits are best grown in warm temperate climates. The Niagara fruit belt, stretching 65km from Hamilton to Niagara on the Lake, provides the climate necessary for this fruit production. This belt produces 90% of Ontario’s annual tender fruit crop. It is one of the largest fruit producing regions in all of Canada.

CENTRAL NORTH ATLANTIC PALEOCEANOGRAPHY DURING THE MIDDLE PLEISTOCENE (ca. 726–603 ka): INSIGHTS FROM THE DINOFLAGELLATE CYST RECORD

Integrated Ocean Drilling Program (IODP) Site U1313, located at the northern boundary of the subtropical gyre in the central North Atlantic, lies within the southern part of the ice-rafted debris belt. Seventy-three palynological samples were studied from an uninterrupted interval ca. 726–603 ka (upper Marine Isotope Stage [MIS] 18 through lower MIS 15) to resolve conflicting paleoceanographic interpretations. Glacial stages were characterized by high productivity surface waters reflecting a southward shift of the Arctic Front. Sea surface salinities (SSSs) and sea surface temperatures (SSTs) were obtained by transfer functions using the Modern Analogue Technique. The lowest SSTs of 9ºC (±1.3) and 10ºC (±1.3) were recorded in glacial MIS 16 and MIS 18 respectively. However, these reconstructions are influenced by abundant heterotrophic taxa and may reflect elevated nutrient levels rather than lowered temperatures. Reworked palynomorphs uniquely indicate a Cretaceous as well as Paleozoic provenance for the first Heinrich-like events.

Relationship Building with Aboriginal Elders in the Publicly Funded Secondary School Classroom: A Study of Ethical Space from an Aboriginal Persepective

This is a current story of ethical space in education that is often neglected in the design of educational experiences for Aboriginal students. This story is told through an Aboriginal lens rooted in the structured Two Row Wampum Belt relational agreement between Aboriginal peoples and Settlers. Through ethnographic narrative based on an extensive literature review, individual in-depth interviews, and a personal journal, this study documents the processes of acceptance, silence, complications, and then rejection to position Aboriginal Elders as inclusive bodies of knowledge in publicly funded secondary school classrooms. Aboriginal Elders are valued as Knowledge Holders, as Aboriginal teachers, guides, and mentors. Yet, the complexities of colonial rights, politics, and policies continue to intrude deeply into the lives of Aboriginal peoples to cause silence, confusion, and struggle rather than an evolution of new knowledge amongst two co-existing solitudes under the original terms of the Two Row Wampum Belt. The study was delayed and then came to an end when the school boards and local schools scrutinized its operating policies and unresolved funding issues. This study demonstrated that despite the Two Row Wampum Belt agreement that promised a co- existent relationship between Aboriginal peoples and Settlers, the strategy of inviting Aboriginal Elders to work alongside teachers in the classroom was viewed as being in conflict with the Settler’s institutional/educational objectivities, and, as such, was denied to Aboriginal students.

Contribution du cortex pariétal postérieur au contrôle de la locomotion sous guidage visuel chez le chat

La vision fournit des informations essentielles sur la surface de marche, ainsi que sur la taille, la forme et la position d’obstacles potentiels dans notre environnement. Dans le cas d’un prédateur, la vision fournit également des informations sur la vitesse d’une proie potentielle. Les mécanismes neuronaux impliqués dans l’exécution des modifications de la marche sous guidage visuel sont relativement bien connus, mais ceux impliqués dans la planification de ces modifications de la marche sont peu étudiés. Le cortex pariétal postérieur (CPP) semble être un candidat approprié si l’on considère les propriétés du CPP lors des mouvements d’atteinte vers une cible. Le but des présents travaux est de déterminer la contribution du CPP au contrôle de la locomotion sous guidage visuel. La première étude présentée dans cette thèse a pour hypothèse que le CPP du chat est impliqué dans la planification du placement précis du pied lors des modifications volontaires de la marche. Nous avons entraîné les animaux à enjamber des obstacles en mouvement attachés à la ceinture d’un tapis roulant. Afin d’augmenter la nécessité d’intégrer les informations visuelles et proprioceptives, nous avons dissocié la vitesse des obstacles de celle du tapis roulant. Nous avons observé que plus la vision devient critique pour la tâche, plus les déficits sont importants. Notre analyse démontre que ceux-ci résultent d’un placement inapproprié du pied dans le cycle de marche précédant l’enjambement de l’obstacle. Ceci suggère que le CPP est impliqué dans la planification du placement précis du pied pendant la locomotion sous guidage visuel. La vision directe est disponible lors de la modification de l’activité des membres antérieurs, mais n’est plus disponible lorsque l’obstacle passe sous le corps. Par conséquent, la modification de l’activité des membres postérieurs doit être basée sur l’information gardée en mémoire et coordonnée avec celle des membres antérieurs. Notre deuxième étude a pour but de caractériser les mécanismes neuronaux responsables de cette coordination. Nous avons proposé que le CPP soit impliqué dans la coordination des membres antérieurs et postérieurs lors de l’enjambement d’obstacles. Pour tester cette hypothèse, nous avons enregistré l’activité de neurones de l’aire 5 pendant la même tâche. Nous avons découvert deux populations: une qui décharge lors du passage de l’obstacle entre les membres antérieurs et postérieurs et une autre qui décharge lors du passage de l’obstacle par les membres postérieurs. Dans la tâche de dissociation visuelle, la décharge est modifiée en fonction du temps de passage de l’obstacle sous le corps et reflète la modification du couplage entre les membres lors du changement dans la stratégie d’enjambement. De plus, ces mêmes neurones maintiennent une décharge soutenue lorsqu’un obstacle fixe se trouve entre les membres antérieurs et postérieurs ou les deux membres postérieurs (limite testée : 1-2min). Ces neurones pourraient être responsables de l’emmagasinage à plus long terme des caractéristiques d’un obstacle pour le guidage des mouvements des membres postérieurs. Nos résultats suggèrent que le CPP est impliqué dans l’intégration des informations visuelles et proprioceptives pour la planification du placement précis du pied devant un obstacle. Le patron de décharge de nos populations neuronales suggère qu’il encode également l’information temporelle et spatiale concernant la vitesse et la position de l’obstacle afin de coordonner l’activité des quatre membres pendant la tâche. Finalement, nous proposons qu’une des fonctions du CPP soit d’estimer la position des membres par rapport à l’obstacle en mouvement.

Asymétries locomotrices réelles et perçues lors de différentes conditions de marche sur tapis roulant chez les personnes saines et hémiparétiques

L'asymétrie locomotrice chez les personnes hémiparétiques à la suite d'un accident vasculaire cérébral (AVC) est fréquemment observée en clinique. Les causes sous-jacentes à cette asymétrie et sa persistance malgré les interventions sont source de nombreuses interrogations. Ce projet avait donc pour objectif de développer de nouvelles connaissances sur les facteurs pouvant expliquer l'asymétrie locomotrice après un AVC. Les objectifs principaux étaient de 1) quantifier les moments et les niveaux d'effort musculaire des membres inférieurs lors de différentes conditions de marche sur le tapis roulant à double courroie (DC) afin de déterminer si ceux-ci sont explicatifs de l'asymétrie locomotrice, et de 2) quantifier la capacité de perception de l'asymétrie locomotrice des personnes saines et hémiparétiques. L’hypothèse générale était que l’asymétrie locomotrice est une stratégie utilisée par les personnes hémiparétiques pour symétriser ou limiter les niveaux d’effort musculaire, tels qu’évalués par le taux d'utilisation musculaire mécanique (TUM). Les résultats ont été présentés dans quatre articles (#2 à #5). La première étude a quantifié l'effet d'un protocole sur tapis roulant à DC visant à modifier l'asymétrie spatio-temporelle sur les moments musculaires aux membres inférieurs des personnes saines et hémiparétiques. Globalement, les résultats ont démontré que placer le membre inférieur parétique sur la courroie lente augmentait le moment fléchisseur plantaire (FP) parétique en post-adaptation et que cette augmentation était corrélée avec l'augmentation de la longueur de pas controlatérale. La deuxième étude a démontré que les personnes présentant de hauts niveaux d'effort dans les FP parétiques avaient une asymétrie des efforts dans leurs FP et extenseurs de hanche (EH) alors que le groupe avec de bas niveaux d'effort dans les FP avait des efforts symétriques. De plus, les deux groupes présentaient des moments FP asymétriques, mais cette asymétrie était reliée à l'asymétrie de forces résiduelles seulement chez ceux présentant de hauts niveaux d'effort. Cela suggère que la faiblesse musculaire joue un rôle important dans la réduction du moment FP parétique chez ceux avec de hauts niveaux d'effort alors que d'autres facteurs doivent être considérés pour expliquer l'asymétrie des moments à la marche des personnes avec de bas niveaux d'effort. La troisième étude a démontré que la symétrisation du patron de marche (temporelle ou spatiale) amenait des efforts musculaires élevés dans les FP parétiques, atteignant des niveaux moyens supérieurs à 85 %. La quatrième étude a évalué la capacité de perception de l'asymétrie locomotrice des personnes saines avec un protocole sur tapis roulant à DC et a démontré qu'elles percevaient leur patron de marche comme asymétrique lorsque leur ratio d'asymétrie temporelle atteignait le seuil de 1,05, avec une variabilité intra-individu faible, suggérant une bonne capacité de ces personnes à détecter l'asymétrie. Les résultats supplémentaires de cette thèse ont démontré que les personnes hémiparétiques percevaient mieux l'asymétrie temporelle que spatiale. En somme, ces résultats suggèrent que la force musculaire et les efforts musculaires des FP parétiques sont à considérer comme des facteurs explicatifs de l'asymétrie locomotrice des personnes hémiparétiques. D'autres études sont nécessaires pour statuer sur les capacités de perception de l'asymétrie locomotrice des personnes hémiparétiques.