The immediate effects of atlanto-occipital joint manipulation and suboccipital muscle inhibition technique on active mouth opening and pressure pain sensitivity over latent myofascial trigger points in the masticatory muscles

DESIGN: A randomized controlled trial.OB JECTIVE: To investigate the immediate effects on pressure pain thresholds over latent trigger points (TrPs) in the masseter and temporalis muscles and active mouth opening following atlanto-occipital joint thrust manipulation or a soft tissue manual intervention targeted to the suboccipital muscles. BACKGROUND : Previous studies have described hypoalgesic effects of neck manipulative interventions over TrPs in the cervical musculature. There is a lack of studies analyzing these mechanisms over TrPs of muscles innervated by the trigeminal nerve. METHODS: One hundred twenty-two volunteers, 31 men and 91 women, between the ages of 18 and 30 years, with latent TrPs in the masseter muscle, were randomly divided into 3 groups: a manipulative group who received an atlanto-occipital joint thrust, a soft tissue group who received an inhibition technique over the suboccipital muscles, and a control group who did not receive an intervention. Pressure pain thresholds over latent TrPs in the masseter and temporalis muscles, and active mouth opening were assessed pretreatment and 2 minutes posttreatment by a blinded assessor. Mixed-model analyses of variance (ANOVA) were used to examine the effects of interventions on each outcome, with group as the between-subjects variable and time as the within-subjects variable. The primary analysis was the group-by-time interaction. RESULTS: The 2-by-3 mixed-model ANOVA revealed a significant group-by-time interaction for changes in pressure pain thresholds over masseter (P<.01) and temporalis (P =.003) muscle latent TrPs and also for active mouth opening (P<.001) in favor of the manipulative and soft tissue groups. Between-group effect sizes were small. CONCLUSIONS: The application of an atlanto-occipital thrust manipulation or soft tissue technique targeted to the suboccipital muscles led to an immediate increase in pressure pain thresholds over latent TrPs in the masseter and temporalis muscles and an increase in maximum active mouth opening. Nevertheless, the effects of both interventions were small and future studies are required to elucidate the clinical relevance of these changes. LEVEL OF EVIDENCE : Therapy, level 1b. J Orthop Sports Phys Ther 2010;40(5):310-317. doi:10.2519/jospt.2010.3257. KEYWORDSDS: cervical manipulation, muscle trigger points, neck, TMJ, upper cervical.

A straightforward method to obtain the cohesive laws of bonded joints under mode I loading

A simple procedure to measure the cohesive laws of bonded joints under mode I loading using the double cantilever beam test is proposed. The method only requires recording the applied load–displacement data and measuring the crack opening displacement at its tip in the course of the experimental test. The strain energy release rate is obtained by a procedure involving the Timoshenko beam theory, the specimen’s compliance and the crack equivalent concept. Following the proposed approach the influence of the fracture process zone is taken into account which is fundamental for an accurate estimation of the failure process details. The cohesive law is obtained by differentiation of the strain energy release rate as a function of the crack opening displacement. The model was validated numerically considering three representative cohesive laws. Numerical simulations using finite element analysis including cohesive zone modeling were performed. The good agreement between the inputted and resulting laws for all the cases considered validates the model. An experimental confirmation was also performed by comparing the numerical and experimental load–displacement curves. The numerical load–displacement curves were obtained by adjusting typical cohesive laws to the ones measured experimentally following the proposed approach and using finite element analysis including cohesive zone modeling. Once again, good agreement was obtained in the comparisons thus demonstrating the good performance of the proposed methodology.

A physical packing sequence algorithm for the container loading problem with static mechanical equilibrium conditions

The container loading problem (CLP) is a combinatorial optimization problem for the spatial arrangement of cargo inside containers so as to maximize the usage of space. The algorithms for this problem are of limited practical applicability if real-world constraints are not considered, one of the most important of which is deemed to be stability. This paper addresses static stability, as opposed to dynamic stability, looking at the stability of the cargo during container loading. This paper proposes two algorithms. The first is a static stability algorithm based on static mechanical equilibrium conditions that can be used as a stability evaluation function embedded in CLP algorithms (e.g. constructive heuristics, metaheuristics). The second proposed algorithm is a physical packing sequence algorithm that, given a container loading arrangement, generates the actual sequence by which each box is placed inside the container, considering static stability and loading operation efficiency constraints.

Immediate effects of hip mobilization with movement in patients with hip osteoarthritis: A randomised controlled trial

Background Mobilization with movement (MWM) has been shown to reduce pain, increase range of motion (ROM) and physical function in a range of different musculoskeletal disorders. Despite this evidence, there is a lack of studies evaluating the effects of MWM for hip osteoarthritis (OA). Objectives To determine the immediate effects of MWM on pain, ROM and functional performance in patients with hip OA. Design Randomized controlled trial with immediate follow-up. Method Forty consenting patients (mean age 78 ± 6 years; 54% female) satisfied the eligibility criteria. All participants completed the study. Two forms of MWM techniques (n = 20) or a simulated MWM (sham) (n = 20) were applied. Primary outcomes: pain recorded by numerical rating scale (NRS). Secondary outcomes: hip flexion and internal rotation ROM, and physical performance (timed up and go, sit to stand, and 40 m self placed walk test) were assessed before and after the intervention. Results For the MWM group, pain decreased by 2 points on the NRS, hip flexion increased by 12.2°, internal rotation by 4.4°, and functional tests were also improved with clinically relevant effects following the MWM. There were no significant changes in the sham group for any outcome variable. Conclusions Pain, hip flexion ROM and physical performance immediately improved after the application of MWM in elderly patients suffering hip OA. The observed immediate changes were of clinical relevance. Future studies are required to determine the long-term effects of this intervention.

Dynamic stability metrics for the container loading problem

The Container Loading Problem (CLP) literature has traditionally evaluated the dynamic stability of cargo by applying two metrics to box arrangements: the mean number of boxes supporting the items excluding those placed directly on the floor (M1) and the percentage of boxes with insufficient lateral support (M2). However, these metrics, that aim to be proxies for cargo stability during transportation, fail to translate real-world cargo conditions of dynamic stability. In this paper two new performance indicators are proposed to evaluate the dynamic stability of cargo arrangements: the number of fallen boxes (NFB) and the number of boxes within the Damage Boundary Curve fragility test (NB_DBC). Using 1500 solutions for well-known problem instances found in the literature, these new performance indicators are evaluated using a physics simulation tool (StableCargo), replacing the real-world transportation by a truck with a simulation of the dynamic behaviour of container loading arrangements. Two new dynamic stability metrics that can be integrated within any container loading algorithm are also proposed. The metrics are analytical models of the proposed stability performance indicators, computed by multiple linear regression. Pearson’s r correlation coefficient was used as an evaluation parameter for the performance of the models. The extensive computational results show that the proposed metrics are better proxies for dynamic stability in the CLP than the previous widely used metrics.

The Falls of Niagara : being a complete guide to all the points of interest around and in the immediate neighbourhood of the great cataract with views taken from sketches by Washington Friend, and from photographs. --

Includes index.

Walker Brothers Quarries Limited fonds, 1975, 1980-1981, 1984, 1987-1989

Serving the Niagara and surrounding areas for over 120 years, Walker Industries has made its impact not only commercially, but also culturally. Beginning in 1875 with the erection of a stone sawing mill on a property John Walker purchased from the Welland Canal Loan Company. One of the first projects Walker cut stone for was the Merritton Town Hall. In 1882 the business expanded to include Walkers children, changing the name to Walker & Sons. Eventually in 1887 the two eldest sons took control of the business operation and their partnership changed the company’s name to Walker Brothers, the same year the company began operating its first quarry. The quarry was conveniently located alongside the 3rd Welland canal, offering easy access to Toronto and Hamilton. It was also close to the railway system which allowed immediate access to Thorold and Niagara Falls and later access to parts of Ontario and Quebec. The quarry supplied stone to build numerous halls and armouries across Ontario. A use was also found for the ‘waste products’ of cutting the limestone. Leftover stone chips were sent to paper mills, where stone was needed as part of the sulphite pulp process for making paper. Beginning to supply the Ontario Paper Company with stone in 1913, meant not only long, hard, work, but also more profit for the company. Before mechanization, most of the loading and unloading of the stone was done by hand, taking 19 man-hours to load an 18 yard railway car. Mechanization followed in 1947 when the plant became fully mechanized making the work easier and increasing production rates. In 1957 the company moved from its original location and opened the St. Catharines Crushed Stone Plant.

Immediate and enduring effects of corticosterone administration during adolescence and adulthood on anxiety and depressive behavior in male rats

Previous research has shown that the stress hormone corticosterone can increase depressive and anxiety-like behavior in rats as well as dampen the HPA response to a novel stressor (Kalynchuk et aI., 2004; Johnson et aI., 2006). Several studies have also shown that adolescence is a period of increased sensitivity to the negative effects of stressors (reviewed in McCormick et aI., 2010), which are often the result of exposure to corticosterone, and yet there is no research to date examining the effects of corticosterone administration during adolescence. The purpose of these experiments is to determine both the immediate and enduring effects of prolonged exposure to corticosterone in adolescence and adulthood on anxiety-like behavior, depressive behavior, and the HPA response. In Experiment 1 adolescent and adult rats were administered an injection of 40 mg/kg of corticosterone or vehicle daily for 16 days. Ha l f of the rats were then tested on the elevated plus maze (EPM) one day after their last injection, and the following day were tested on the forced swim test (FST). After the FST, which is a stressor, blood samples were collected at three time points, and the plasma concentrations of corticosterone were determined using a radioimmunoassay. The remaining rats were left undisturbed for three weeks, and then underwent the same testing as the first group. Corticosterone treatment had little effect on anxiety-like and depressive behavior, but it did alter the HPA response to the FST. In those rats tested soon after the period of injections, corticosterone dampened the HPA response as compared to vehicle treated rats in both adolescent and adult treated rats. For the adolescent treated rats that were tested several weeks later, corticosterone treatment increased HPA response as compared to the vehicle treated rats, but the same was not true for the adult treated rats. I t was hypothesized that the lack of behavioral effects of the corticosterone treatment may be the result of the vehicle injections inducing a stress response and thereby both groups would have similarly altered behavior. In Experiment 2 rats were administered corticosterone dissolved in their drinking water with 2.5% ethanol, or jus t the 2.5% ethanol or plain water, to determine the effects of corticosterone treatment without a stressor present. The regular drinking water was replaced with treated water for 16 days either during adulthood or adolescence, and as before, rats were either tested in the FST one day after the water was removed or three weeks later. Again there was no effect of treatment on depressive behavior. Similar to what was observed in Experiment 1, corticosterone treatment dampened the HPA response to a stressor for the rats tested soon after the treatment period. However, in Experiment 2 there was no effect of treatment on HPA response in those rats tested several weeks after they were treated. These results indicate that corticosterone can have a lasting effect on the HPA when administered in adolescence by injections but not in drinking water, which is likely because of the different schedules of exposure and rates of absorption between the two administration methods.

Message from the President of the United States, Recommending an Immediate Declaration of War Against Great Britain (1812)

"June 1st, 1812. Referred to the Committee on Foreign Relations. June 3d, 1812. Bill reported, declaring war ..."

Mise au point de nanoparticules polymères pour l'administration parentérale d'agents anticancéreux hydrophobes

Plusieurs agents anticancéreux très puissants sont caractérisés par une solubilité aqueuse limitée et une toxicité systémique importante. Cette dernière serait liée d’une part à la solubilisation des agents anticancéreux à l’aide de surfactifs de bas poids moléculaire, connus pour leur toxicité intrinsèque, et d’autre part, par le manque de spécificité tissulaire des anticancéreux. Les vecteurs colloïdaux à base de polymères permettraient de résoudre certains défis liés à la formulation d’agents anticancéreux hydrophobes. D’abord, les polymères peuvent être sélectionnés afin de répondre à des critères précis de compatibilité, de dégradation et d’affinité pour le médicament à formuler. Ensuite, le fait d’encapsuler l’agent anticancéreux dans un vecteur peut améliorer son efficacité thérapeutique en favorisant son accumulation au niveau du tissu cible, i.e. la tumeur, et ainsi limiter sa distribution au niveau des tissus sains. Des travaux antérieurs menés au sein de notre laboratoire ont mené à la mise au point de micelles à base de poly(N-vinyl-pyrrolidone)-bloc-poly(D,L-lactide) (PVP-b-PDLLA) capables de solubiliser des agents anticancéreux faiblement hydrosolubles dont le PTX. Ce dernier est commercialisé sous le nom de Taxol® et formulé à l’aide du Crémophor EL (CrEL), un surfactif de bas poids moléculaire pouvant provoquer, entre autres, des réactions d’hypersensibilité sévères. Bien que les micelles de PVP-b-PDLLA chargées de PTX aient démontré une meilleure tolérance comparée au Taxol®, leur potentiel de ciblage tumoral et leur efficacité thérapeutique étaient similaires à la forme commerciale à doses égales. Ceci était possiblement dû au fait que les micelles étaient rapidement déstabilisées et ne pouvaient retenir leur cargo suite à leur administration intraveineuse. Nous avons donc décidé de poursuivre les travaux avec un autre type de vecteur, soit des nanoparticules, qui possèdent une stabilité intrinsèque supérieure aux micelles. L’objectif principal de cette thèse de doctorat était donc de mettre au point des nanoparticules polymères pour l’administration parentérale d’agents anticancéreux faiblement solubles dans l’eau. Les nanoparticules devaient permettre d’encapsuler des agents anticancéreux hydrophobes et de les libérer de manière contrôlée sur plusieurs jours. De plus, elles devaient démontrer un temps de circulation plasmatique prolongée afin de favoriser l’accumulation passive du médicament encapsulé au niveau de la tumeur. La première partie du travail visait à employer pour la première fois le copolymère amphiphile PVP-b-PDLLA comme émulsifiant dans la préparation de nanoparticules polymères. Ainsi, une méthode de fabrication des nanoparticules par émulsion huile-dans-eau a été appliquée afin de produire des nanoparticules à base de PDLLA de taille inférieure à 250 nm. Grâce aux propriétés lyoprotectrices de la couronne de PVP présente à la surface des nanoparticules, celles-ci pouvaient retrouver leur distribution de taille initiale après lyophilisation et redispersion en milieu aqueux. Deux anticancéreux hydrophobes, soit le PTX et l’étoposide (ETO), ont été encapsulés dans les nanoparticules et libérés de ces dernières de façon contrôlée sur plusieurs jours in vitro. Une procédure de « salting-out » a été appliquée afin d’améliorer le taux d’incorporation de l’ETO initialement faible étant donnée sa solubilité aqueuse légèrement supérieure à celle du PTX. Le second volet des travaux visait à comparer le PVP comme polymère de surface des nanoparticules au PEG, le polymère le plus fréquemment employé à cette fin en vectorisation. Par le biais d’études d’adsorption de protéines, de capture par les macrophages et de biodistribution chez le rat, nous avons établi une corrélation in vitro/in vivo démontrant que le PVP n’était pas un agent de surface aussi efficace que le PEG. Ainsi, malgré la présence du PVP à la surface des nanoparticules de PDLLA, ces dernières étaient rapidement éliminées de la circulation sanguine suite à leur capture par le système des phagocytes mononucléés. Par conséquent, dans le troisième volet de cette thèse, le PEG a été retenu comme agent de surface, tandis que différents polymères biodégradables de la famille des polyesters, certains synthétiques (PDLLA et copolymères d’acide lactique/acide glycolique), d’autres de source naturelle (poly(hydroxyalkanoates)(PHAs)), ont été investiguées comme matériaux formant le cœur des nanoparticules. Il en est ressorti que les propriétés physicochimiques des polyesters avaient un impact majeur sur l’efficacité d’encapsulation du PTX et son profil de libération des nanoparticules in vitro. Contrairement aux PHAs, les polymères synthétiques ont démontré des taux d’incorporation élevés ainsi qu’une libération contrôlée de leur cargo. Des études de pharmacocinétique et de biodistribution ont démontré que les nanoparticules de PDLLA dotées d’une couronne de PEG conféraient un temps de circulation plasmatique prolongé au PTX et favorisaient son accumulation tumorale. Les nanoparticules polymères représentent donc une alternative intéressante au Taxol®.

Caractérisation de la pharmacocinétique de formulations sensibles au pH et de formulations destinées au traitement des intoxications médicamenteuses

La préparation de formulations à libération contrôlée est le domaine des sciences pharmaceutiques qui vise à modifier l’environnement immédiat des principes actifs pour en améliorer l’efficacité et l’innocuité. Cet objectif peut être atteint en modifiant la cinétique de circulation dans le sang ou la distribution dans l’organisme. Le but de ce projet de recherche était d’étudier le profil pharmacocinétique (PK) de différentes formulations liposomales. L’analyse PK, généralement employée pour représenter et prédire les concentrations plasmatiques des médicaments et de leurs métabolites, a été utilisée ici pour caractériser in vivo des formulations sensibles au pH servant à modifier la distribution intracellulaire de principes actifs ainsi que des liposomes destinés au traitement des intoxications médicamenteuses. Dans un premier temps, la PK d’un copolymère sensible au pH, à base de N-isopropylacrylamide (NIPAM) et d’acide méthacrylique (MAA) a été étudiée. Ce dernier, le p(NIPAM-co-MAA) est utilisé dans notre laboratoire pour la fabrication de liposomes sensibles au pH. L’étude de PK conduite sur les profils de concentrations sanguines de différents polymères a défini les caractéristiques influençant la circulation des macromolécules dans l’organisme. La taille des molécules, leur point de trouble ainsi que la présence d’un segment hydrophobe à l’extrémité des chaînes se sont avérés déterminants. Le seuil de filtration glomérulaire du polymère a été évalué à 32 000 g/mol. Finalement, l’analyse PK a permis de s’assurer que les complexes formés par la fixation du polymère à la surface des liposomes restaient stables dans le sang, après injection par voie intraveineuse. Ces données ont établi qu’il était possible de synthétiser un polymère pouvant être adéquatement éliminé par filtration rénale et que les liposomes sensibles au pH préparés avec celui-ci demeuraient intacts dans l’organisme. En second lieu, l’analyse PK a été utilisée dans le développement de liposomes possédant un gradient de pH transmembranaire pour le traitement des intoxications médicamenteuses. Une formulation a été développée et optimisée in vitro pour capturer un médicament modèle, le diltiazem (DTZ). La formulation liposomale s’est avérée 40 fois plus performante que les émulsions lipidiques utilisées en clinique. L’analyse PK des liposomes a permis de confirmer la stabilité de la formulation in vivo et d’analyser l’influence des liposomes sur la circulation plasmatique du DTZ et de son principal métabolite, le desacétyldiltiazem (DAD). Il a été démontré que les liposomes étaient capables de capturer et de séquestrer le principe actif dans la circulation sanguine lorsque celui-ci était administré, par la voie intraveineuse. L’injection des liposomes 2 minutes avant l’administration du DTZ augmentait significativement l’aire sous la courbe du DTZ et du DAD tout en diminuant leur clairance plasmatique et leur volume de distribution. L’effet de ces modifications PK sur l’activité pharmacologique du médicament a ensuite été évalué. Les liposomes ont diminué l’effet hypotenseur du principe actif administré en bolus ou en perfusion sur une période d’une heure. Au cours de ces travaux, l’analyse PK a servi à établir la preuve de concept que des liposomes possédant un gradient de pH transmembranaire pouvaient modifier la PK d’un médicament cardiovasculaire et en diminuer l’activité pharmacologique. Ces résultats serviront de base pour le développement de la formulation destinée au traitement des intoxications médicamenteuses. Ce travail souligne la pertinence d’utiliser l’analyse PK dans la mise au point de vecteurs pharmaceutiques destinés à des applications variées. À ce stade de développement, l’aspect prédictif de l’analyse n’a pas été exploité, mais le côté descriptif a permis de comparer adéquatement diverses formulations et de tirer des conclusions pertinentes quant à leur devenir dans l’organisme.

Effect of curing temperature , fibre loading and bonding agent on the equilibrium swelling of isora-natural rubbercomposites

Isora fibre-reinforced natural rubber (NR) composites were cured at 80, 100, 120 and 150°C using a low temperature curing accelerator system. Composites were also prepared using a conventional accelerator system and cured at 150°C. The swelling behavior of these composites at varying fibre loadings was studied in toluene and hexane. Results show that the uptake of solvent and volume fraction of rubber due to swelling was lower for the low temperature cured vulcanizates which is an indication of the better fibre/rubber adhesion. The uptake of aromatic solvent was higher than that of aliphatic solvent, for all the composites. As the fibre content increased, the solvent uptake decreased, due to the superior solvent resistance of the fibre and good fibre-rubber interactions. The bonding agent improved the swelling resistance of the composites due to the strong interfacial adhesion. Due to the improved adhesion between the fibre and rubber, the ratio of the change in volume fraction of rubber due to swelling to the volume fraction of rubber in the dry sample (V,) was found to decrease in the presence of bonding agent. At a fixed fibre loading, the alkali treated fibre composite showed a lower percentage swelling than untreated one for both systems showing superior rubber-fibre interactions.

Mechanical Properties of Short-Isora-Fiber-Reinforced Natural Rubber Composites: Effects of Fiber Length, Orientation, and Loading; Alkali Treatment;and Bonding Agent

A series of short-isora-fiber-reinforced natural rubber composites were prepared by the incorporation of fibers of different lengths (6, 10, and 14 mm) at 15 phr loading and at different concentrations (10, 20, 30, and 40 phr) with a 10 mm fiber length. Mixes were also prepared with 10 mm long fibers treated with a 5% NaOH solution. The vulcanization parameters, processability, and stress-strain properties of these composites were analyzed. Properties such as tensile strength, tear strength, and tensile modulus were found to be at maximum for composites containing longitudinally oriented fibers 10 mm in length. Mixes containing fiber loadings of 30 phr with bonding agent (resorcinol-formaldehyde [RF] resin) showed mechanical properties superior to all other composites. Scanning electron microscopy (SEM) studies were carried out to investigate the fiber surface morphology, fiber pullout, and fiber-rubber interface. SEM studies showed that the bonding between the fiber and rubber was improved with treated fibers and with the use of bonding agent.