Geologia e Caracterização Tecnológica do Minério de Manganês da Mina Córrego do Cocho, Itapira (SP)

The objects of this study are three manganese ore deposits and one mine derived from lateritic weathering of gondites (spessartine quartzites). These deposits are associated with Mn-rich garnet metasediments of the Itapira Group (Paleoproterozoic) and the reserves were estimated at approximately 2.0 × 10 6 tons with an average grade of 23% MnO 2. The ore minerals are cryptomelane, pyrolusite, lithiophorite, spessartine and psilomelane. Several crystal shapes and textural characteristics were identifi ed in this study, which are related to the degree of liberation, as confi rmed by heavy media separation method. In this study, we determined the main characteristics of the liberation of manganese, which is concentrated in the fi ne grain-size fraction and is lost during ore dressing. Therefore, the low average content of MnO 2 (28%) is due to this loss, whereas at grain size of minus 0.074 mm, contents near 40% MnO 2 were observed. This suggests that the ore can be used for manufacturing manganese sulphate fertilizers. A comparative study with the ore deposits located at Ouro Fino (MG), mainly with the Caneleiras mine, showed that higher degree of liberation occurs in the coarse grain-size fractions (0.84 to 0.074 mm with MnO 2 content of 38%). As a consequence, the ore can be used for manufacturing Fe-Si-Mn alloys.

Air-assistance in spray booms which have different spray volumes and nozzle types for chemically controlling spodoptera frugiperda on corn

The study aimed to evaluate the performance of air assistance in spray booms using different types of nozzles and spray volumes. We took into account spray deposits, fall armyworm control and crop corn performance in a narrow row cropping system. The experiment was carried out at the experimental area of Sao Paulo State University, Botucatu/SP, Brazil, during the 2008/2009 agricultural season, in randomized blocks with a factorial scheme (2×2+1) and four replications. Two spray nozzles (flat fan nozzle and hollow cone nozzle) were tested, combined with two air assistance levels in the spray boom (with and without air assistance) and a treatment control. In the experimental spraying, Spinosad insecticide was sprayed in amounts of 48 g active substance (a.s.)/ha. The air assistance in the spray boom increased the spray deposits in the V 4 growth stage of the corn plants. Moreover, the application of this technology showed higher efficiency on fall armyworm control, reaching a 100% level 15 days after spraying, in the V 10 growth stage of the plants. The hollow cone nozzle increased the spray deposit level on the corn plants compared with the flat fan nozzle, at growth stage V 4. However, the flat fan nozzle, combined with air assistance technology, was more effective for controlling fall armyworm in the same growth stage (V 4), although the hollow cone nozzle increased the deposit levels on the plants. All the technologies tested in the study promoted a reduction of plant damage from fall armyworm attack. Corn productivity is directly related to the control efficiency of fall armyworm.

Modelagem da produção de sedimentos na sub-Bacia Hidrográfica do Riacho Jacaré - SE

The sediment production in river basins is an important aspect for planning the land use. Mathematical models are useful tools for analyzing the problem by providing speed, convenience and flexibility to the simulations of current conditions and future. In this article we evaluate a methodology to simulate the sediment production combining the MUSLE, a hydrologic model (ABC) and a GIS in different scenarios of land use. The models used showed good performance for purposes of planning land use, as well as for agricultural and environmental planning.

The University and its libraries: Reactions and resistance to scientific publishers

This paper addresses the relationship of copyright and the right of universities on scientific production. Information and Communication Technologies (ICTs) are causing many changes in the system of scientific communication, such as the creation of Institutional Repositories that aim to gather scientific production in digital format. The University needs quicker ways of spreading academic production and many questions are emerging due to contexts such as the Open Access movement. Thus, this paper questions the positioning of Universities, especially Public Universities, which despite having policies related to intellectual property to protect the transferring forms of research results to society; many times do not have a positioning or a mechanism that regulates the self-deposit of scientific production in these Institutional Repositories. In order to develop this paper, the following issues are addressed: lack of interest of the University in storing scientific production; reports on the relationship of the library with scientific publishing houses; the participation of faculty members and students in supporting the Free Access movement; and initiatives aimed at greater flexibility of copyright to the context of scientific production. In order to follow the development of these issues at international level, it was opted for qualitative research with non-participating direct observation to carry out the identification and description of copyright policy of important publishers from the ROMEO SHERPA site; therefore, it can be observed that there are changes regarding the publishers' flexibility before self-archiving of authors in open access institutional repositories in their universities. Given this scenario, we presente reflections and considerations that involve the progress and mainly the integration of the University and its faculty members; the institution should recommend and guide its faculty members not to transfer their copyrights, but to defend their right of copy to Institutional Repositories along with Publishing Houses.

Polarização induzida aplicada no estudo de ocorrencia de cobre localizada a nordeste de Caçapava do Sul (RS)

Mineral research works are fundamentals for recognition and incorporation of new reserves. This paper present an integrated analysis of geologic and metallogenetics data, with results gotten from the application of the Induced Polarization geophysical method, in an copper ore occurrence, inserted in Camaquã sedimentary basin, situated in northeast of Caçapava do Sul city (RS). In area ocurr arkosean arenites average coarse, the intensely silicified and recrystallized, pertaining to Passo da Promessa Formation. The presence of azurita and malachite in breakings and high porosity zones of the host rock characterizes the mineral occurrence in surface, located in the crossing two fault families. The inversion models indicate the predominance of high chargeability in vulcanics tuff, rock of high porosity in relation to the andesites and metaconglomerates gifts in the area. The strong structural control of the mineral occurrence associated the high chargeability in volcanic tuff is indications of the hydrothermal fluid access by means of faults, until rocks with great porosity, where it occurred disseminations of copper sulfides in depth and carbonates in surface.

Suíte plutônica Alumiador, grupo Amonguijá, maciço rio apa - MS

The Rio Apa Massif corresponds the southern portion of the Amazon Craton and is located in the southwest of Mato Grosso do Sul State. It consists on Paleoproterozoic rocks of Rio Apa Complex, Alto Tererê Group and Amonguijá Group, is subdivided into Alumiador Plutonic Suite and Serra da Bocaina Volcanic Suite. The volcanic suite is comprises sub volcanic, volcanic and varied volcanoclastics rocks with composition ranging from alkali-rhyolitic to rhyolite types. The plutonic suite corresponds to an N-S elongated batholith and is characterized by four main segments delimited by NW-SE faults. The southern and central main segments, discussed in this paper, are characterized by the following petrographic facies: medium to fine grained hornblende-biotite monzogranites, coarse grained biotite monzogranites, graphic biotite sienogranites and muscovite sienogranites and the northern segment is contemporaneous and is composed of two different sequences of rocks, one acid and another of basic to ultrabasic composition. The southern and central segment consists of to chemically compatible rocks with the types I and A Granites. These are calc-alkaline rocks of high potassium to the shoshonitic and subalkaline. Constitute sin-collisional granites of metaluminous the peraluminous characters of the Amonguijá Magmatic Arc, but they exhibit late litotypes with chemical characteristics of post tectonic granites from intraplate environment.

Relação do meio físico com o manejo sustentável de plantio de eucalipto em áreas de terrenos acidentados - A Fazenda Santa Edwirges, Vale do Paraíba, Sudeste do Brasil

This study intends to evaluate the effects of landscape physical elements (rocks and relief) associated with silviculture activities. The study was carried out on a small farm (Fazenda Santa Edwirges) covered by Eucalyptus forested situated in the Paraiba do Sul Basin, Southeast Brazil. The methodology consisted of detailed geological and geomorphological studies at 1:10,000 scale, and laboratory analysis of soil physical properties. The results showed three geologic-geomorphologic associations (ridge escarpment with granitic rocks, steep and gentle hills cut by shear zones and gentle hill with alluvial sediments) present high vulnerability for the development of the physical processes such as accelerated erosion landslides and flooding. In contrast, mountains associated with gneissic rocks present smaller vulnerability and high resilience for the development of the physical processes. The results have showed the importance of considering the interactions among landscape physical for the eucalyptus forest management contributing to a better selection area for eucalyptus cultivation and minimize adverse environment impact in road design.

Geoelectrical prospection of disseminated sulfide mineral occurrences in Camaquã Sedimentary Basin, Rio Grande do Sul State, Brazil

The mineral exploration is a complex activity that should involve a combination of direct and indirect techniques of geological investigation. The growing demand for base metals in the national and international market provides the revaluation of mineral occurrences that can become deposits and mines. This paper presents the results of the electrical resistivity and induced polarization geophysical methods in azimuthal arrangement, applied in a mineral occurrence of disseminated copper sulfides, previously studied through trenches and core drilling, located in the Camaquã Sedimentary Basin, Rio Grande do Sul State, Brazil. The inversion models indicate the coincidence of high chargeability and low resistivity values. The integration of geophysical data permitted the elaboration of 3D attributes visualization models for the mineralization enclosed in volcanic tuffs. The integrated geophysical and geological analysis indicates the potential of a new mineralized area. © 2012 Sociedade Brasileira de Geofísica.

Sponge spicules indicate Holocene environmental changes on the Nabileque River floodplain, southern Pantanal, Brazil

Sponge spicules are siliceous microfossils that are especially useful for analysis of sandy fluvio-lacustrine sediments. Sponge spicules in a long sediment core (~550 cm below surface), consisting of fine sand, sandy silt, and organic-rich mud, recovered from the floodplain of the Nabileque River, southern Pantanal, Brazil (S20°16′38. 3″/W57°33′00. 0″), form the basis of a novel paleoenvironmental interpretation for this region. Optically stimulated luminescence dates constrain the timing of deposition to the middle-late Holocene and all spicules identified are typical of the Brazilian cerrado biome. The base of the section is dominated by Oncosclera navicella Carter 1881, Metaniaspinata Carter 1881, and Corvospongilla seckti Bonetto and Ezcurra de Drago 1966, which indicate a lotic to semi-lotic environment strongly influenced by an actively meandering river channel at ~6. 7-5. 7 ka BP. The appearance of Heterorotula fistula Volkmer-Ribeiro and Motta 1995, Dosilia pydanieli Volkmer-Ribeiro 1992 and Radiospongilla amazonensis Volkmer-Ribeiro and Maciel 1983 at ~340 cm downcore suggests a reduction in flowing water and a more stable lentic environment, consistent with deposition in an oxbow lake. This oxbow lake environment existed during an interval of regional aridity between ~4. 5 and 3. 9 ka BP. Spicules, as well as phytoliths and diatoms, are highly variable moving up-section, with species from both lotic and lentic ecosystems present. Above ~193 cm, the total abundance of spicules declines, consistent with wetter climate conditions and development of an underfit river similar to the modern floodplain. Results support hypotheses related to migration of the Paraguay River inferred from geomorphological studies and add a key southern-region dataset to the emerging Holocene database of paleoenvironmental records from the Pantanal wetlands. © 2012 Springer Science+Business Media Dordrecht.

Dispersion and evaporation of droplets amended with adjuvants on soybeans

Quantification of the effects of adjuvants on droplet behaviour on plant surfaces is needed to improve pesticide spray application efficiency for soybeans. Dispersion and evaporation of single 300-μm diameter droplets amended with each of four spray adjuvants at five concentrations were investigated for four soybean plant surfaces (abaxial and adaxial leaflet surfaces, petiole, basal stem). The four adjuvants were a crop oil concentrate (COC), a modified seed oil (MSO), a non-ionic surfactant (NIS) and an oil surfactant blend (OSB). A single-droplet generator was used to produce and deposit 300-μm diameter droplets on target surfaces under controlled environmental conditions. Adjuvants significantly increased the dispersion (or wetted area) of droplets on plant surfaces. Droplet-wetted areas increased with increased adjuvant concentrations but not in direct proportion. The average increases of wetted areas across the four soybean plant surfaces were 443, 462, 416, or 343% when the spray mixture was amended with COC, MSO, NIS or OSB at the manufacturer-recommended concentrations, respectively. Among the four surfaces, the largest wetted area was on the abaxial surface, followed by the adaxial surface, the petiole and then the basal stem. Droplet evaporation times were inversely proportional to the wetted areas. The evaporation time of 300-μm diameter droplets ranged from 36 to 142. s on the four surfaces when the spray mixture was amended with an adjuvant, whereas the water-only droplets ranged from 161 to 190. s. The results demonstrated that use of adjuvants offers great potential to improve the homogeneity of sprayed pesticides, to increase spray coverage and to reduce pesticide application rates on soybean plants. These effects could benefit farmers economically and reduce environmental contamination by pesticides. © 2012.

Morphological diversity of setae on the second maxilliped of fiddler crabs (Decapoda: Ocypodidae) from the southwestern Atlantic coast

Fiddler crabs are deposit feeders, and use the setae on their mouth appendages to manipulate sediment particles to extract food. The number of spoon-tipped setae on the second maxilliped is frequently related to the distribution of fiddler crabs on estuarine sediments, but no study has compared the morphological diversity of these setae among multiple fiddler crab species. Here, we describe and classify the setae of the second maxillipeds of the nine Uca spp. known from the Brazilian coast. The second maxilliped of each species was examined by scanning electron microscopy. Six types of setae (five papposerrate, and one pappose) were described on the meropodite of the second maxilliped. Among the papposerrate setae, one type had a spoon-like tip, and the morphology of this type, especially the degree of curvature, differed between species. Members of Uca leptodactylus, U. uruguayensis, and U. maracoani had highly concave spoon-tipped setae. In U. rapax and U. cumulanta, the setal tip was moderately curved, while in U. thayeri, U. burgersi, and U. mordax, this curvature was slight. At the other extreme, the meropodite of the second maxilliped of U. vocator lacked setae altogether. This is the first study that describes differences in the degree of curvature of spoon-tipped setae in fiddler crabs. This trait may be strongly related to the distribution of these fiddler crabs on different estuarine substrates. © 2012, The American Microscopical Society, Inc.

Effect of different disinfectants on the microhardness and roughness of acrylic resins for ocular prosthesis

Background: Ocular prosthesis materials should have specific properties for their indication and durability; therefore, it is important to investigate their physical behaviour when affected by several disinfectants. Objectives: This study evaluated the influence of different disinfecting solutions on the microhardness and surface roughness of acrylic resins for ocular prosthesis. Materials and Methods: Fifty samples simulating ocular prostheses were fabricated with N1 resin and colourless resin and divided (n = 10) according to the disinfectant used: neutral soap, Opti-free, Efferdent, 1% hypochlorite (HYC) and 4% chlorhexidine (CHX). Samples were stored in saline solution at 37°C and disinfected during 120 days. Both microhardness and roughness were investigated before, after 60 days and 120 days of disinfection and storage. Microhardness was measured using a microhardner and the roughness with a roughness device. Results: N1 resin showed lower microhardness when compared with colourless resin (p < 0.05). HYC and CHX groups exhibited the highest change of microhardness and roughness values (p < 0.05). An increase in roughness and reduction in microhardness of ocular acrylic resins were observed after both periods of disinfection and storage (p < 0.05). Conclusion: Both disinfection/storage periods affected the microhardness and roughness values of the samples. © 2012 The Gerodontology Society and John Wiley & Sons A/S.

A metabolic pathway assembled by enzyme selection may support herbivory of leaf-cutter ants on plant starch

Mutualistic associations shape the evolution in different organism groups. The association between the leaf-cutter ant Atta sexdens and the basidiomycete fungus Leucoagaricus gongylophorus has enabled them to degrade starch from plant material generating glucose, which is a major food source for both mutualists. Starch degradation is promoted by enzymes contained in the fecal fluid that ants deposit on the fungus culture in cut leaves inside the nests. To understand the dynamics of starch degradation in ant nests, we purified and characterized starch degrading enzymes from the ant fecal fluid and from laboratory cultures of L. gongylophorus and found that the ants intestine positively selects fungal α-amylase and a maltase likely produced by the ants, as a negative selection is imposed to fungal maltase and ant α-amylases. Selected enzymes are more resistant to catabolic repression by glucose and proposed to structure a metabolic pathway in which the fungal α-amylase initiates starch catalysis to generate byproducts which are sequentially degraded by the maltase to produce glucose. The pathway is responsible for effective degradation of starch and proposed to represent a major evolutionary innovation enabling efficient starch assimilation from plant material by leaf-cutters. © 2013 Elsevier Ltd.

Optically transparent membrane based on bacterial cellulose/ polycaprolactone

Optically transparent membranes from bacterial cellulose (BC)/polycaprolactone (PCL) have been prepared by impregnation of PCL acetone solution into dried BC membranes. UV-Vis measurements showed an increase on transparency in BC/PCL membrane when compared with pristine BC. The good transparency of the BC/PCL can be related to the presence of BC nanofibers associated with deposit of PCL nano-sized spherulites which are smaller than the wavelength of visible light and practically free of light scattering. XRD results show that cellulose type I structure is preserved inside the BC/PCL membrane, while the mechanical properties suggested indicated that PCL acts as a plasticizer for the BC membrane. The novel BC/PCL membrane could be used for preparation of fully biocompatible flexible display and biodegradable food packaging.

Volume de aplicação na qualidade da deposição da pulverização na cutura do algodoeiro

Pós-graduação em Agronomia (Agricultura) - FCA