931 resultados para High Speed Vehicles
Resumo:
If we want to evaluate the degree of local development that High-Speed Train (HST) provides in a city it is fundamental to observe the capacity of the actors of territory of organizing themselves to make use of their endogenous resources. Through the elaboration of a new methodology, the study of the process of development of three medium-sized cities with HST, Lérida (Spain), Avignon (France) and Novara (Italy), is suggested. As conclusion certain characteristic problems of intermediate city are shown in the execution of its local project, basically the existence of a troublesome multiscalar relationship and of a weak network of local actors. The fragility of this urban context is owed to the lack of correct processes of internal and external governance
Resumo:
La millora de la productivitat i la qualitat són indubtablement dues de les principals exigències del sector productiu modern i factors clau per la competitivitat i la supervivència. Dins aquest sector,la fabricació per arrancada de material juga encara avui en dia un paper protagonista tot i l'aparició de noves tècniques de conformat per addició.Indústries com l'aeronàutica, l'automobilística,la del motlle o l'energètica, depenen en bona part de les prestacions de les màquines-eina. Aquesta Tesi aborda dos aspectes rellevants quan es tracta de millorar de la productivitat i la qualitat del sector productiu: el problema del fimbrament, més conegut per la denominació anglosaxona chatter,i la monitorització de la rugositat superficial en el mecanitzat a alta velocitat.
Resumo:
L'objectiu central de la tesi és estudiar els processos que permeten aconseguir un desenvolupament local a llarg termini de les ciutats mitjanes a partir de la implantació d'una gran infrastructura com el Tren d'Alta Velocitat (TAV). Es parteix de la hipòtesi que el desenvolupament local urbà a partir del TAV depèn de factors objectius i de factors subjectius (dels subjectes), uns factors que prenen una forma particular en el desenvolupament de les ciutats mitjanes. La tesi es divideix en una primera part teòrica i segona de més aplicada. Diversos autors han arribat a la conclusió que la relació tradicional que s'ha donat entre les infrastructures de transport i territori parteix d'uns paradigmes deterministes, que s'exemplifiquen amb una relació de "causa-efecte". Per aquest motiu, s'han criticat els estudis sobre els efectes socioeconòmics de les infrastructures de transport, així com el mateix concepte d'"efecte". Aquesta crítica es repeteix els estudis sobre el TAV i les ciutats mitjanes, que arriben a la conclusió que el desenvolupament econòmic no és un fet automàtic i que no es poden predir les conseqüències a mig i llarg termini del TAV. El desenvolupament local a partir del TAV, doncs, estaria relacionat amb tres elements principals. En primer lloc, entendre que la ciutat -i el territori- és un fenomen complex i, com a tal, cal abordar-lo des de la teoria dels sistemes complexos. En segon lloc, la gran infrastructura ha de convertir-se en un recurs endogen (interconnexió amb la xarxa local d'actors i territorialització en el milieu de la ciutat) per a que pugui contribuir al desenvolupament. En tercer lloc, la dinàmica de governance dels actors és primordial, i es divideix en la gestió interna de la xarxa local (projecte local) i la gestió multinivell de les administracions. En base als referents teòrics, es construeix una metodologia per avaluar el grau de desenvolupament local que ha comportat el TAV en tres ciutats mitjanes de l'arc mediterrani europeu, Lleida, Avinyó i Novara, situades respectivament a Espanya, França i Itàlia. La metodologia preveu l'estudi d'aspectes tècnics de la ciutat com els de transport (Posició territorial de la ciutat a partir del TAV, Característiques de l'estació TAV), urbanístics (Model urbanístic a escala municipal/urbana, Model urbanístic a escala de l'estació) i econòmics (Diferents projectes econòmics de la ciutat relacionats amb el TAV). També preveu l'estudi d'aspectes organitzatius externs (Els agents supralocals i els seus projectes, Grau de conflictivitat i cooperació en les relacions dels agents locals i supralocals) i interns (Capacitat de creació d'un projecte de ciutat a partir del TAV, Agents que participen en el projecte local i la seva dinàmica, Àmbit territorial dels projectes). Finalment s'efectua una avaluació del procés i dels resultats del desenvolupament local. Com a conclusió es demostra que el procés de desenvolupament local a partir de les grans infrastructures de transport depèn, en bon part, de la capacitat de governance. Depèn, per un cantó, de la capacitat dels agents locals d'elaborar un projecte de desenvolupament i liderar unes estratègies d'aprofitament i, de l'altre, de la capacitat dels agents del territori (estatals, regionals, locals) de crear aliances i cooperació per planificar la infrastructura de transport. Finalment es presenten un seguit de recomanacions a les ciutats que volen planificar l'arribada del TAV per a que contribueixi a un desenvolupament amb les característiques d'eficàcia, sostenibilitat, productivitat i equitat.
Resumo:
The effect of multiple sclerosis (MS) on the ability to identify emotional expressions in faces was investigated, and possible associations with patients’ characteristics were explored. 56 non-demented MS patients and 56 healthy subjects (HS) with similar demographic characteristics performed an emotion recognition task (ERT), the Benton Facial Recognition Test (BFRT), and answered the Hospital Anxiety and Depression Scale (HADS). Additionally, MS patients underwent a neurological examination and a comprehensive neuropsychological evaluation. The ERT consisted of 42 pictures of faces (depicting anger, disgust, fear, happiness, sadness, surprise and neutral expressions) from the NimStim set. An iViewX high-speed eye tracker was used to record eye movements during ERT. The fixation times were calculated for two regions of interest (i.e., eyes and rest of the face). No significant differences were found between MS and HC on ERT’s behavioral and oculomotor measures. Bivariate and multiple regression analyses revealed significant associations between ERT’s behavioral performance and demographic, clinical, psychopathological, and cognitive measures.
Resumo:
A ferroelectric liquid crystal spatial light modulator is used to generate up to 24 independently controllable traps in a holographic optical tweezers system using time-multiplexed Fresnel zone plates. For use in biological applications, helical zone plates are used to generate Laguerre-Gaussian laser modes. The high speed switching of the ferroelectric device together with recent advances in computer technology enable fast, smooth movement of traps that can be independently controlled in real time. This is demonstrated by the trapping and manipulation of yeast cells and fungal spores. (c) 2006 Optical Society of America.
Resumo:
Matrix-assisted laser desorption/ionization (MALDI) is a key technique in mass spectrometry (MS)-based proteomics. MALDI MS is extremely sensitive, easy-to-apply, and relatively tolerant to contaminants. Its high-speed data acquisition and large-scale, off-line sample preparation has made it once again the focus for high-throughput proteomic analyses. These and other unique properties of MALDI offer new possibilities in applications such as rapid molecular profiling and imaging by MS. Proteomics and its employment in Systems Biology and other areas that require sensitive and high-throughput bioanalytical techniques greatly depend on these methodologies. This chapter provides a basic introduction to the MALDI methodology and its general application in proteomic research. It describes the basic MALDI sample preparation steps and two easy-to-follow examples for protein identification including extensive notes on these topics with practical tips that are often not available in the Subheadings 2 and 3 of research articles.
Determination of digesta flow entering the omasal canal of dairy cows using different marker systems
Resumo:
Four studies were conducted to compare the effect of four indigestible markers (LiCoEDTA, Yb-acetate, Cr-mordanted straw and indigestible neutral-detergent fibre (INDF)) and three marker systems on the flow of digesta entering the omasal canal of lactating dairy cows. Samples of digesta aspirated from the omasal canal were pooled and separated using filtration and high-speed centrifugation into three fractions defined as the liquid phase, small particulate and large particulate matter. Co was primarily associated with the liquid phase, Yb was concentrated in small particulate matter, whilst Cr and INDF were associated with large particles. Digesta flow was calculated based on single markers or using the reconstitution system based on combinations of two (Co + Yb, Co + Cr and Co + INDF) or three markers (Co + Yb + Cr and Co + Yb + INDF). Use of single markers resulted in large differences between estimates of organic matter (OM) flow entering the omasal canal suggesting that samples were not representative of true digesta. Digesta appeared to consist of at least three phases that tended to separate during sampling. OM was concentrated in particulate matter, whilst the liquid phase consisted mainly of volatile fatty acids and inorganic matter. Yb was intimately associated with nitrogenous compounds, whereas Cr and INDF were concentrated in fibrous material. Current data indicated that marker systems based on Yb in combination with Cr or INDF are required for the accurate determination of OM, N and neutral-detergent fibre flow. In cases where the flow of water-soluble nutrients entering the omasal canal is also required, the marker system should also include Co.
Resumo:
A Fractal Quantizer is proposed that replaces the expensive division operation for the computation of scalar quantization by more modest and available multiplication, addition and shift operations. Although the proposed method is iterative in nature, simulations prove a virtually undetectable distortion to the naked eve for JPEG compressed images using a single iteration. The method requires a change to the usual tables used in JPEG algorithins but of similar size. For practical purposes, performing quantization is reduced to a multiplication plus addition operation easily programmed in either low-end embedded processors and suitable for efficient and very high speed implementation in ASIC or FPGA hardware. FPGA hardware implementation shows up to x15 area-time savingscompared to standars solutions for devices with dedicated multipliers. The method can be also immediately extended to perform adaptive quantization(1).
Resumo:
An approach to the automatic generation of efficient Field Programmable Gate Arrays (FPGAs) circuits for the Regular Expression-based (RegEx) Pattern Matching problems is presented. Using a novel design strategy, as proposed, circuits that are highly area-and-time-efficient can be automatically generated for arbitrary sets of regular expressions. This makes the technique suitable for applications that must handle very large sets of patterns at high speed, such as in the network security and intrusion detection application domains. We have combined several existing techniques to optimise our solution for such domains and proposed the way the whole process of dynamic generation of FPGAs for RegEX pattern matching could be automated efficiently.
Resumo:
This paper describes the design, implementation and testing of a high speed controlled stereo “head/eye” platform which facilitates the rapid redirection of gaze in response to visual input. It details the mechanical device, which is based around geared DC motors, and describes hardware aspects of the controller and vision system, which are implemented on a reconfigurable network of general purpose parallel processors. The servo-controller is described in detail and higher level gaze and vision constructs outlined. The paper gives performance figures gained both from mechanical tests on the platform alone, and from closed loop tests on the entire system using visual feedback from a feature detector.
Resumo:
It took the solar polar passage of Ulysses in the early 1990s to establish the global structure of the solar wind speed during solar minimum. However, it remains unclear if the solar wind is composed of two distinct populations of solar wind from different sources (e.g., closed loops which open up to produce the slow solar wind) or if the fast and slow solar wind rely on the superradial expansion of the magnetic field to account for the observed solar wind speed variation. We investigate the solar wind in the inner corona using the Wang-Sheeley-Arge (WSA) coronal model incorporating a new empirical magnetic topology–velocity relationship calibrated for use at 0.1 AU. In this study the empirical solar wind speed relationship was determined by using Helios perihelion observations, along with results from Riley et al. (2003) and Schwadron et al. (2005) as constraints. The new relationship was tested by using it to drive the ENLIL 3-D MHD solar wind model and obtain solar wind parameters at Earth (1.0 AU) and Ulysses (1.4 AU). The improvements in speed, its variability, and the occurrence of high-speed enhancements provide confidence that the new velocity relationship better determines the solar wind speed in the outer corona (0.1 AU). An analysis of this improved velocity field within the WSA model suggests the existence of two distinct mechanisms of the solar wind generation, one for fast and one for slow solar wind, implying that a combination of present theories may be necessary to explain solar wind observations.
Resumo:
This paper describes the novel use of cluster analysis in the field of industrial process control. The severe multivariable process problems encountered in manufacturing have often led to machine shutdowns, where the need for corrective actions arises in order to resume operation. Production faults which are caused by processes running in less efficient regions may be prevented or diagnosed using a reasoning based on cluster analysis. Indeed the intemal complexity of a production machinery may be depicted in clusters of multidimensional data points which characterise the manufacturing process. The application of a Mean-Tracking cluster algorithm (developed in Reading) to field data acquired from a high-speed machinery will be discussed. The objective of such an application is to illustrate how machine behaviour can be studied, in particular how regions of erroneous and stable running behaviour can be identified.
Resumo:
A number of commonly encountered simple neural network types are discussed, with particular attention being paid to their applicability in automation and control when applied to food processing. In the first instance n-tuple networks are considered, these being particularly useful for high speed production checking operations. Subsequently backpropagation networks are discussed, these being useful both in a more familiar feedback control arrangement and also for such things as recipe prediction.
Resumo:
Proactive motion in hand tracking and in finger bending, in which the body motion occurs prior to the reference signal, was reported by the preceding researchers when the target signals were shown to the subjects at relatively high speed or high frequencies. These phenomena indicate that the human sensory-motor system tends to choose an anticipatory mode rather than a reactive mode, when the target motion is relatively fast. The present research was undertaken to study what kind of mode appears in the sensory-motor system when two persons were asked to track the hand position of the partner with each other at various mean tracking frequency. The experimental results showed a transition from a mutual error-correction mode to a synchronization mode occurred in the same region of the tracking frequency with that of the transition from a reactive error-correction mode to a proactive anticipatory mode in the mechanical target tracking experiments. Present research indicated that synchronization of body motion occurred only when both of the pair subjects operated in a proactive anticipatory mode. We also presented mathematical models to explain the behavior of the error-correction mode and the synchronization mode.
Resumo:
The response of lightning rates over Europe to arrival of high speed solar wind streams at Earth is investigated using a superposed epoch analysis. Fast solar wind stream arrival is determined from modulation of the solar wind V y component, measured by the Advanced Composition Explorer spacecraft. Lightning rate changes around these event times are determined from the very low frequency arrival time difference (ATD) system of the UK Met Office. Arrival of high speed streams at Earth is found to be preceded by a decrease in total solar irradiance and an increase in sunspot number and Mg II emissions. These are consistent with the high speed stream's source being co-located with an active region appearing on the Eastern solar limb and rotating at the 27 d period of the Sun. Arrival of the high speed stream at Earth also coincides with a small (~1%) but rapid decrease in galactic cosmic ray flux, a moderate (~6%) increase in lower energy solar energetic protons (SEPs), and a substantial, statistically significant increase in lightning rates. These changes persist for around 40 d in all three quantities. The lightning rate increase is corroborated by an increase in the total number of thunder days observed by UK Met stations, again persisting for around 40 d after the arrival of a high speed solar wind stream. This result appears to contradict earlier studies that found an anti-correlation between sunspot number and thunder days over solar cycle timescales. The increase in lightning rates and thunder days that we observe coincides with an increased flux of SEPs which, while not being detected at ground level, nevertheless penetrate the atmosphere to tropospheric altitudes. This effect could be further amplified by an increase in mean lightning stroke intensity that brings more strokes above the detection threshold of the ATD system. In order to remove any potential seasonal bias the analysis was repeated for daily solar wind triggers occurring during the summer months (June to August). Though this reduced the number of solar wind triggers to 32, the response in both lightning and thunder day data remained statistically significant. This modulation of lightning by regular and predictable solar wind events may be beneficial to medium range forecasting of hazardous weather.