Reactive Attachment Disorder in infants in foster care and associated mental health and cognitive functioning

Background: Reactive attachment disorder (RAD) has been described as one of the least researched and most poorly understood psychiatric disorders (Chaffin et al., 2006). Despite this, given what is known about maltreatment and attachment, it is likely that RAD has profound consequences for child development. Very little is known about the prevalence and stability of RAD symptoms over time. Until recently it has been difficult to investigate the presence of RAD due to limited measures for informing a diagnosis. However this study utilised a new observational tool Method: A cross sectional study design with a one-year follow-up explored RAD symptoms in maltreated infants in Scotland (n=55, age range= 16-62 months) and associated mental health and cognitive functioning. The study utilised the Rating of Inhibited Attachment Behavior Scale (Corval, et al., unpublished 2014) that has recently been developed by experts in the field along side The Disturbances of Attachment Interview (Smyke & Zeanah, 1999). Children were recruited as part of the BeST trial, whereby all infants who came in to the care of the local authority in Glasgow due to child protection concerns were invited to participate. The study sample was representative of the larger pool of data in terms of age, gender, mental health and cognitive functioning. Results: The sample was found to be representative of the population of maltreated children from which it was derived. Prevalence of RAD was found to be 7.3% (n=3, 95% CI [0.43 – 14.17]) at T1, when children are first placed in to foster care. At T2, following one year in improved care conditions, 4.3% (n=2, 95% CI [below 0 – 10.16]) met a borderline RAD diagnosis. Levels of observed RAD symptoms decreased significantly at T2 in comparison to T1 but carer reported symptoms of RAD did not. Children whose RAD symptoms did not improve were found to be significantly older and showed less prosocial behaviour. RAD was associated with some mental health and cognitive difficulties. Lower Verbal IQ and unexpectedly, prosocial behaviour were found to predict RAD symptoms. Conclusions: The preliminary findings have added to the developing understanding of RAD symptoms and associated difficulties however further exploration of RAD in larger samples would be invaluable.

Education and Training in Occupational Health Psychology: The Case for E-Learning

For the discipline of occupational health psychology (OHP) to continue to evolve and to serve workers effectively it is imperative that education and training provision is available that enables students to acquire knowledge and skills, free of geographical and temporal constraints. This chapter begins with a brief introduction to the historical development of education and training in OHP in Europe. The review culminates with the assertion that higher education institutions are now required to act innovatively in regard to the expansion of provision. One such initiative involves the introduction of e-learning. A case study concerning the implementation of a Masters degree in OHP by e-learning is presented. On the outcomes of the case study, recommendations are offered for the design and implementation of such courses. The chapter concludes by raising some further questions that need to be addressed for education and training provision in OHP to continue to expand.

Conceptualisation, design and development of a primary school based child healthy weight intervention

INTRODUCTION: In common with much of the developed world, Scotland has a severe and well established problem with overweight and obesity in childhood with recent figures demonstrating that 31% of Scottish children aged 2-15 years old were overweight including obese in 2014. This problem is more pronounced in socioeconomically disadvantaged groups and in older children across all economic groups (Scottish Health Survey, 2014). Children who are overweight or obese are at increased risk of a number of adverse health outcomes in the short term and throughout their life course (Lobstein and Jackson-Leach, 2006). The Scottish Government tasked all Scottish Health Boards with developing and delivering child healthy weight interventions to clinically overweight or obese children in an attempt to address this health problem. It is therefore imperative to deliver high quality, affordable, appropriately targeted interventions which can make a sustained impact on children’s lifestyles, setting them up for life as healthy weight adults. This research aimed to inform the design, readiness for application and Health Board suitability of an effective primary school-based curricular child healthy weight intervention. METHODS: the process involved in conceptualising a child healthy weight intervention, developing the intervention, planning for implementation and subsequent evaluation was guided by the PRECEDE-PROCEED Model (Green and Kreuter, 2005) and the Intervention Mapping protocol (Lloyd et al. 2011). RESULTS: The outputs from each stage of the development process were used to formulate a child healthy weight intervention conceptual model then develop plans for delivery and evaluation. DISCUSSION: The Fit for School conceptual model developed through this process has the potential to theoretically modify energy balance related behaviours associated with unhealthy weight gain in childhood. It also has the potential to be delivered at a Health Board scale within current organisational restrictions.

Rail passenger crowding, stress, health and safety in Britain

There has long been a question as to whether crowding in rail passenger transport poses a threat to passenger health related to the experience of stress. A review of the scientific literature was conducted. Little rail-specific empirical research was identified. The more general research that does exist suggests that high-density environments are not necessarily perceived as crowded and that stress-related physiological, psychological and behavioural reactions do not necessarily follow from exposure to such environments. Several factors are identified that may moderate the impact of a high-density environment on perceptions of crowding and the subsequent experience and effects of stress. These include, inter alia, perceptions of control and predictability of events. However, if caused, the experience and effects of stress may be made worse by inadequate coach design that gives rise to discomfort. The model that emerges from these findings offers a suitable framework for the development of research questions that should help translate emerging knowledge into practical interventions, for the reduction of any adverse health outcomes associated with crowding.

Improving photofermentative hydrogen production through metabolic engineering and DOE (Design of Experiments)

A l’heure actuelle, les biocarburants renouvelables et qui ne nuit pas à l'environnement sont à l'étude intensive en raison de l'augmentation des problèmes de santé et de la diminution des combustibles fossiles. H2 est l'un des candidats les plus prometteurs en raison de ses caractéristiques uniques, telles que la densité d'énergie élevée et la génération faible ou inexistante de polluants. Une façon attrayante pour produire la H2 est par les bactéries photosynthétiques qui peuvent capter l'énergie lumineuse pour actionner la production H2 avec leur système de nitrogénase. L'objectif principal de cette étude était d'améliorer le rendement de H2 des bactéries photosynthétiques pourpres non sulfureuses utilisant une combinaison de génie métabolique et le plan des expériences. Une hypothèse est que le rendement en H2 pourrait être améliorée par la redirection de flux de cycle du Calvin-Benson-Bassham envers du système de nitrogénase qui catalyse la réduction des protons en H2. Ainsi, un PRK, phosphoribulose kinase, mutant « knock-out » de Rhodobacter capsulatus JP91 a été créé. L’analyse de la croissance sur des différentes sources de carbone a montré que ce mutant ne peut croître qu’avec l’acétate, sans toutefois produire d' H2. Un mutant spontané, YL1, a été récupéré qui a retenu l'cbbP (codant pour PRK) mutation d'origine, mais qui avait acquis la capacité de se développer sur le glucose et produire H2. Une étude de la production H2 sous différents niveaux d'éclairage a montré que le rendement d’YL1 était de 20-40% supérieure à la souche type sauvage JP91. Cependant, il n'y avait pas d'amélioration notable du taux de production de H2. Une étude cinétique a montré que la croissance et la production d'hydrogène sont fortement liées avec des électrons à partir du glucose principalement dirigés vers la production de H2 et la formation de la biomasse. Sous des intensités lumineuses faibles à intermédiaires, la production d'acides organiques est importante, ce qui suggère une nouvelle amélioration additionnel du rendement H2 pourrait être possible grâce à l'optimisation des processus. Dans une série d'expériences associées, un autre mutant spontané, YL2, qui a un phénotype similaire à YL1, a été testé pour la croissance dans un milieu contenant de l'ammonium. Les résultats ont montré que YL2 ne peut croître que avec de l'acétate comme source de carbone, encore une fois, sans produire de H2. Une incubation prolongée dans les milieux qui ne supportent pas la croissance de YL2 a permis l'isolement de deux mutants spontanés secondaires intéressants, YL3 et YL4. L'analyse par empreint du pied Western a montré que les deux souches ont, dans une gamme de concentrations d'ammonium, l'expression constitutive de la nitrogénase. Les génomes d’YL2, YL3 et YL4 ont été séquencés afin de trouver les mutations responsables de ce phénomène. Fait intéressant, les mutations de nifA1 et nifA2 ont été trouvés dans les deux YL3 et YL4. Il est probable qu'un changement conformationnel de NifA modifie l'interaction protéine-protéine entre NifA et PII protéines (telles que GlnB ou GlnK), lui permettant d'échapper à la régulation par l'ammonium, et donc d'être capable d'activer la transcription de la nitrogénase en présence d'ammonium. On ignore comment le nitrogénase synthétisé est capable de maintenir son activité parce qu’en théorie, il devrait également être soumis à une régulation post-traductionnelle par ammonium. Une autre preuve pourrait être obtenue par l'étude du transcriptome d’YL3 et YL4. Une première étude sur la production d’ H2 par YL3 et YL4 ont montré qu'ils sont capables d’une beaucoup plus grande production d'hydrogène que JP91 en milieu d'ammonium, qui ouvre la porte pour les études futures avec ces souches en utilisant des déchets contenant de l'ammonium en tant que substrats. Enfin, le reformage biologique de l'éthanol à H2 avec la bactérie photosynthétique, Rhodopseudomonas palustris CGA009 a été examiné. La production d'éthanol avec fermentation utilisant des ressources renouvelables microbiennes a été traitée comme une technique mature. Cependant, la plupart des études du reformage de l'éthanol à H2 se sont concentrés sur le reformage chimique à la vapeur, ce qui nécessite généralement une haute charge énergetique et résultats dans les émissions de gaz toxiques. Ainsi le reformage biologique de l'éthanol à H2 avec des bactéries photosynthétiques, qui peuvent capturer la lumière pour répondre aux besoins énergétiques de cette réaction, semble d’être plus prometteuse. Une étude précédente a démontré la production d'hydrogène à partir d'éthanol, toutefois, le rendement ou la durée de cette réaction n'a pas été examiné. Une analyse RSM (méthode de surface de réponse) a été réalisée dans laquelle les concentrations de trois facteurs principaux, l'intensité lumineuse, de l'éthanol et du glutamate ont été variés. Nos résultats ont montré que près de 2 moles de H2 peuvent être obtenus à partir d'une mole d'éthanol, 33% de ce qui est théoriquement possible.

Therapeutic commitment for general nurses in dealing with mental health problems of People Living with HIV/AIDS in Blantyre, Malawi

Introduction Therapeutic commitment of general nurses influences their provision of mental health care to clients. It is the general nurses’ predisposition for working therapeutically with clients who have mental health problems (MHPs). In Malawi, general nurses are the majority of health care professionals who care for people living with HIV/AIDS (PLWHA) and they are expected to deal with the mental health problems of these patients. The provision of mental health care to PLWHA is vital because apart from the physical illnesses associated with the virus, these people are also affected by mental health problems. However, most general nurses, feel neither confident nor competent when dealing with the mental health problems of their clients in Malawi. This may negatively influence their therapeutic commitment in dealing with mental health problems of PLWHA. However, therapeutic commitment of general nurses in providing mental health care to PLWHA in Malawi remains unknown. Materials and Methods The study used a quantitative descriptive survey design. a convenient sample comprising of 136 general nurses was used and data was collected using Mental Health Problems Perception Questionnaire. Permission to use the tool in this study was granted by Prof. Lauder. Ethical approval to conduct the study was granted by Ethics Committees at University of KwaZulu Natal and University of Malawi. Data were analysed using Statistical Package for Social Sciences version 15.0. Results The study findings revealed that there is a linear relationship between general nurses’ levels of knowledge and skills and their therapeutic commitment (r=.40, n=136, p<.05) to provide mental health care of PLWHA. Conclusion This study suggests general nurses’ levels of therapeutic commitment in dealing with MHPs of PLWHA vary and their levels of knowledge and skill to deal with MHPs influence their willingness to provide mental health care to PLWHA.

Ontology-Based Workflow Design for the Coordination of Homecare Interventions

Part 20: Health and Care Networks

NUTRITION AND HEALTH STATUS OF HIV-INFECTED ADULTS ON ARVS AT AMREF CLINIC KIBERA URBAN SLUM, KENYA

The health of people living with HIV and AIDS (PLWHA) is nutritionally challenged in many nations of the world. The scourge has reduced socio-economic progress globally and more so in sub-Saharan Africa (SSA) where its impact has been compounded by poverty and food insecurity. Good nutrition with proper drug use improves the quality of life for those infected but it is not known how PLWHA exposed to chronic malnutrition and food shortages from developing nations adjust their nutrition with use of Anti-Retro-viral Drugs (ARVs). This study assessed nutritional status, dietary practices, and dietary management of common illnesses that hinder daily food intake by the patients and use of ARVs with food recommendations provided by the health care givers. A descriptive case study design was used to sample 120 HIV-infected patients using systematic sampling procedure. These patients sought health care from an urban slum, Kibera AMREF clinic. Data were collected by anthropometric measurements, bio-chemical analysis, semi-structured questionnaire and secondary data. The Statistical Package for Social Sciences (SPSS) and the Nutri-Survey software packages were used to analyze data. Dietary intakes of micro-nutrients were inadequate for >70% of the patients when compared to the Recommended Daily Requirements. When Body Mass Indices (BMI) were used, only 6.7% of the respondents were underweight (BMI<18.5kg/m2) and 9.2% were overweight (BMI> 25kg/m2), serum albumin test results (mean 3.34±0.06g/dl) showed 60.8% of the respondents were protein deficient and this was confirmed by low dietary protein intakes. The BMI was not related to dietary nutrient intakes, serum albumin and CD4 cell counts (p>0.05). It appeared that there was no significant difference in BMI readings at different categories of CD4 cell count (p>0.05) suggesting that the level of immunity did not affect weight gain with ARV as observed in many studies from developed countries. Malnutrition was, therefore, evident among the 60.8% of the cases as identified by serum albumin tests and food intake was not adequate (68%) for the patients as they ate once a day due to lack of food. National food and nutrition policy should incorporate food security boosting guidelines for the poor people infected with HIV and using ARVs.

A systems approach to cardiovascular health and disease with a focus on aortic wave dynamics

Cardiovascular diseases (CVDs) have reached an epidemic proportion in the US and worldwide with serious consequences in terms of human suffering and economic impact. More than one third of American adults are suffering from CVDs. The total direct and indirect costs of CVDs are more than $500 billion per year. Therefore, there is an urgent need to develop noninvasive diagnostics methods, to design minimally invasive assist devices, and to develop economical and easy-to-use monitoring systems for cardiovascular diseases. In order to achieve these goals, it is necessary to gain a better understanding of the subsystems that constitute the cardiovascular system. The aorta is one of these subsystems whose role in cardiovascular functioning has been underestimated. Traditionally, the aorta and its branches have been viewed as resistive conduits connected to an active pump (left ventricle of the heart). However, this perception fails to explain many observed physiological results. My goal in this thesis is to demonstrate the subtle but important role of the aorta as a system, with focus on the wave dynamics in the aorta.

The operation of a healthy heart is based on an optimized balance between its pumping characteristics and the hemodynamics of the aorta and vascular branches. The delicate balance between the aorta and heart can be impaired due to aging, smoking, or disease. The heart generates pulsatile flow that produces pressure and flow waves as it enters into the compliant aorta. These aortic waves propagate and reflect from reflection sites (bifurcations and tapering). They can act constructively and assist the blood circulation. However, they may act destructively, promoting diseases or initiating sudden cardiac death. These waves also carry information about the diseases of the heart, vascular disease, and coupling of heart and aorta. In order to elucidate the role of the aorta as a dynamic system, the interplay between the dominant wave dynamic parameters is investigated in this study. These parameters are heart rate, aortic compliance (wave speed), and locations of reflection sites. Both computational and experimental approaches have been used in this research. In some cases, the results are further explained using theoretical models.

The main findings of this study are as follows: (i) developing a physiologically realistic outflow boundary condition for blood flow modeling in a compliant vasculature; (ii) demonstrating that pulse pressure as a single index cannot predict the true level of pulsatile workload on the left ventricle; (iii) proving that there is an optimum heart rate in which the pulsatile workload of the heart is minimized and that the optimum heart rate shifts to a higher value as aortic rigidity increases; (iv) introducing a simple bio-inspired device for correction and optimization of aortic wave reflection that reduces the workload on the heart; (v) deriving a non-dimensional number that can predict the optimum wave dynamic state in a mammalian cardiovascular system; (vi) demonstrating that waves can create a pumping effect in the aorta; (vii) introducing a system parameter and a new medical index, Intrinsic Frequency, that can be used for noninvasive diagnosis of heart and vascular diseases; and (viii) proposing a new medical hypothesis for sudden cardiac death in young athletes.

Early consumption of liquids different to breast milk in Mexican infants under 1 year: results of the probabilistic National Health and Nutrition Survey 2012

Introduction: Studies on infant dietary intake do not generally focus on the types of liquids consumed. Objective: To document by age and breastfeeding status, the types of liquids present in the diet of Mexican children under 1 year of age (< 1 y) who participated in the National Health and Nutrition Survey 2012 (ENSANUT-2012). Methods: Analysis of the infant < 1 y feeding practices from the ENSANUT-2012 survey in non-breastfed (non-BF) and breastfed (BF) infants by status quo for the consumption of liquids grouped in: water, formula, fortified LICONSA milk, nutritive liquids (NL; thin cereal-based gruel with water or milk and coffee with milk) and non-nutritive liquids (non-NL) as sugared water, water-based drinks, tea, beans or chicken broth, aguamiel and coffee. In this infants < 1 y we analyzed the not grouped consumption of liquids in the first three days of life (newborns) from the mother's recall. Percentage and confidence intervals (95% CI) were calculated adjusting for survey design. Statistical differences were analyzed by Z test. Results: We observed a high consumption of human milk followed by formula (56.7%) and water (51.1%) in infants under 6 months of age (< 6 mo). The proportion of non-BF infants consuming non-NL was higher than for BF infants (p < 0.05). More than 60% of older infants (6 mo and < 1 y) consumed formula and were non-BF. In newborns formula consumption was predominant, followed by tea or infusion and water. Conclusions: Non-breast milk liquids are present undesirably in Mexican infants' diet and non-NL are consumed earlier than NL, revealing inadequate early dietary practices.

Design de equipamento médico

Dissertação de Mestrado para obtenção do grau de Mestre em Design de Produto, apresentada na Universidade de Lisboa - Faculdade de Arquitectura.

Subject response rates in case-control studies of cancer : time trends, study design determinants, and quality of reporting

Objectifs: Examiner les tendances temporelles, les déterminants en lien avec le design des études et la qualité des taux de réponse rapportés dans des études cas-témoins sur le cancer publiées lors des 30 dernières années. Méthodes: Une revue des études cas-témoins sur le cancer a été menée. Les critères d'inclusion étaient la publication (i) dans l’un de 15 grands périodiques ciblés et (ii) lors de quatre périodes de publication (1984-1986, 1995, 2005 et 2013) couvrant trois décennies. 370 études ont été sélectionnées et examinées. La méthodologie en lien avec le recrutement des sujets et la collecte de données, les caractéristiques de la population, les taux de participation et les raisons de la non-participation ont été extraites de ces études. Des statistiques descriptives ont été utilisées pour résumer la qualité des taux de réponse rapportés (en fonction de la quantité d’information disponible), les tendances temporelles et les déterminants des taux de réponse; des modèles de régression linéaire ont été utilisés pour analyser les tendances temporelles et les déterminants des taux de participation. Résultats: Dans l'ensemble, les qualités des taux de réponse rapportés et des raisons de non-participation étaient très faible, particulièrement chez les témoins. La participation a diminué au cours des 30 dernières années, et cette baisse est plus marquée dans les études menées après 2000. Lorsque l'on compare les taux de réponse dans les études récentes a ceux des études menées au cours de 1971 à 1980, il y a une plus grande baisse chez les témoins sélectionnés en population générale ( -17,04%, IC 95%: -23,17%, -10,91%) que chez les cas (-5,99%, IC 95%: -11,50%, -0,48%). Les déterminants statistiquement significatifs du taux de réponse chez les cas étaient: le type de cancer examiné, la localisation géographique de la population de l'étude, et le mode de collecte des données. Le seul déterminant statistiquement significatif du taux de réponse chez les témoins hospitaliers était leur localisation géographique. Le seul déterminant statistiquement significatif du taux de participation chez les témoins sélectionnés en population générale était le type de répondant (sujet uniquement ou accompagné d’une tierce personne). Conclusion: Le taux de participation dans les études cas-témoins sur le cancer semble avoir diminué au cours des 30 dernières années et cette baisse serait plus marquée dans les études récentes. Afin d'évaluer le niveau réel de non-participation et ses déterminants, ainsi que l'impact de la non-participation sur la validité des études, il est nécessaire que les études publiées utilisent une approche normalisée pour calculer leurs taux de participation et qu’elles rapportent ceux-ci de façon transparente.

Mercury in Gas Operations - Occupational Health Risk Assessment

The project goal was to determine plant operations and maintenance worker’s level of exposure to mercury during routine and non-routine (i.e. turnarounds and inspections) maintenance events in eight gas processing plants. The project team prepared sampling and analysis plans designed to each plant’s process design and scheduled maintenance events. Occupational exposure sampling and monitoring efforts were focused on the measurement of mercury vapor concentration in worker breathing zone air during specific maintenance events including: pipe scrapping, process filter replacement, and process vessel inspection. Similar exposure groups were identified and worker breathing zone and ambient air samples were collected and analyzed for total mercury. Occupational exposure measurement techniques included portable field monitoring instruments, standard passive and active monitoring methods and an emerging passive absorption technology. Process sampling campaigns were focused on inlet gas streams, mercury removal unit outlets, treated gas, acid gas and sales gas. The results were used to identify process areas with increased potential for mercury exposure during maintenance events. Sampling methods used for the determination of total mercury in gas phase streams were based on the USEPA Methods 30B and EPA 1631 and EPA 1669. The results of four six-week long sampling campaigns have been evaluated and some conclusions and recommendations have been made. The author’s role in this project included the direction of all field phases of the project and the development and implementation of the sampling strategy. Additionally, the author participated in the development and implementation of the Quality Assurance Project Plan, Data Quality Objectives, and Similar Exposure Groups identification. All field generated data was reviewed by the author along with laboratory reports in order to generate conclusions and recommendations.

Computer Aided Design Algorithmic Technique for Very Large Scale Integrated Circuit Design and Smart Home Embedded System Design

To tackle the challenges at circuit level and system level VLSI and embedded system design, this dissertation proposes various novel algorithms to explore the efficient solutions. At the circuit level, a new reliability-driven minimum cost Steiner routing and layer assignment scheme is proposed, and the first transceiver insertion algorithmic framework for the optical interconnect is proposed. At the system level, a reliability-driven task scheduling scheme for multiprocessor real-time embedded systems, which optimizes system energy consumption under stochastic fault occurrences, is proposed. The embedded system design is also widely used in the smart home area for improving health, wellbeing and quality of life. The proposed scheduling scheme for multiprocessor embedded systems is hence extended to handle the energy consumption scheduling issues for smart homes. The extended scheme can arrange the household appliances for operation to minimize monetary expense of a customer based on the time-varying pricing model.

Structural Health Monitoring Inside Concrete and Grout Using the Wireless Identification and Sensing Platform (WISP)

This research investigates the implementation of battery-less RFID sensing platforms inside lossy media, such as, concrete and grout. Both concrete and novel grouts can be used for nuclear plant decommissioning as part of the U.S. Department of Energy’s (DOE’s) cleanup projects. Our research examines the following: (1) material characterization, (2) analytical modeling of transmission and propagation losses inside lossy media, (3) maximum operational range of RFID wireless sensors embedded inside concrete and grout, and (4) best positioning of antennas for achieving longer communication range between RFID antennas and wireless sensors. Our research uses the battery-less Wireless Identification and Sensing Platform (WISP) which can be used to monitor temperature, and humidity inside complex materials. By using a commercial Agilent open-ended coaxial probe (HP8570B), the measurements of the dielectric permittivity of concrete and grout are performed. Subsequently, the measured complex permittivity is used to formulate analytical Debye models. Also, the transmission and propagation losses of a uniform plane wave inside grout are calculated. Our results show that wireless sensors will perform better in concrete than grout. In addition, the maximum axial and radial ranges for WISP are experimentally determined. Our work illustrates the feasibility of battery-less wireless sensors that are embedded inside concrete and grout. Also, our work provides information that can be used to optimize the power management, sampling rate, and antenna design of such sensors.