Feature Extraction from Whole-Sky Ground-Based Images for Cloud-Type Recognition

Several features that can be extracted from digital images of the sky and that can be useful for cloud-type classification of such images are presented. Some features are statistical measurements of image texture, some are based on the Fourier transform of the image and, finally, others are computed from the image where cloudy pixels are distinguished from clear-sky pixels. The use of the most suitable features in an automatic classification algorithm is also shown and discussed. Both the features and the classifier are developed over images taken by two different camera devices, namely, a total sky imager (TSI) and a whole sky imager (WSC), which are placed in two different areas of the world (Toowoomba, Australia; and Girona, Spain, respectively). The performance of the classifier is assessed by comparing its image classification with an a priori classification carried out by visual inspection of more than 200 images from each camera. The index of agreement is 76% when five different sky conditions are considered: clear, low cumuliform clouds, stratiform clouds (overcast), cirriform clouds, and mottled clouds (altocumulus, cirrocumulus). Discussion on the future directions of this research is also presented, regarding both the use of other features and the use of other classification techniques

Inferring transport characteristics in a fractured rock aquifer by combining single-hole ground-penetrating radar reflection monitoring and tracer test data

Investigations of solute transport in fractured rock aquifers often rely on tracer test data acquired at a limited number of observation points. Such data do not, by themselves, allow detailed assessments of the spreading of the injected tracer plume. To better understand the transport behavior in a granitic aquifer, we combine tracer test data with single-hole ground-penetrating radar (GPR) reflection monitoring data. Five successful tracer tests were performed under various experimental conditions between two boreholes 6 m apart. For each experiment, saline tracer was injected into a previously identified packed-off transmissive fracture while repeatedly acquiring single-hole GPR reflection profiles together with electrical conductivity logs in the pumping borehole. By analyzing depth-migrated GPR difference images together with tracer breakthrough curves and associated simplified flow and transport modeling, we estimate (1) the number, the connectivity, and the geometry of fractures that contribute to tracer transport, (2) the velocity and the mass of tracer that was carried along each flow path, and (3) the effective transport parameters of the identified flow paths. We find a qualitative agreement when comparing the time evolution of GPR reflectivity strengths at strategic locations in the formation with those arising from simulated transport. The discrepancies are on the same order as those between observed and simulated breakthrough curves at the outflow locations. The rather subtle and repeatable GPR signals provide useful and complementary information to tracer test data acquired at the outflow locations and may help us to characterize transport phenomena in fractured rock aquifers.

Grado de impacto en el suelo y la vegetación en áreas de uso público del Parque Nacional de Tierra del Fuego (Argentina)

En los últimos años, el uso turístico de las áreas protegidas ha aumentado considerablemente, y con él, el grado de impacto. Es por este motivo que se requieren medidas de gestión adecuadas para identificar, conocer y evaluar estos impactos potenciales y así poder actuar ofreciendo un uso recreativo de estas áreas a la vez que se asegura su conservación. El objetivo del presente trabajo fue establecer el grado de impacto que sufre la vegetaciòn y el suelo del Parque Nacional de Tierra del Fuego en las zonas de acampada y compararlas con las áreas adyacentes, como controles. Asimismo, se buscó establecer cuales son los indicadores de impacto de mayor relevancia para poder ser usados como herramientas de gestión. La evaluación se efectuó mediante el muestreo de 40 parcelas, transectas y intertransectas en donde se analizaron variables vegetacionales (cobertura arbórea, arbustiva y herbácea, porcentaje de suelo desnudo, daño en árboles y arbustos, y presencia de raíces expuestas) y del suelo (pH, materia orgánica, densidad aparente y humedad). El grado de impacto se estableció numéricamente con una fórmula matemática en donde se seleccionaron los parámetros evaluados y se corrigieron con factores de correción, dando un impacto clasificado como “compatible” en el área de Río Pipo y “moderado” en el área de Laguna Verde. También se formularon propuestas de manejo para prevenir y/o minimizar los impactos producidos en las zonas de camping.

Enhanced radar precipitation estimates using a combined clutter and beam blockage correction technique

Weather radar observations are currently the most reliable method for remote sensing of precipitation. However, a number of factors affect the quality of radar observations and may limit seriously automated quantitative applications of radar precipitation estimates such as those required in Numerical Weather Prediction (NWP) data assimilation or in hydrological models. In this paper, a technique to correct two different problems typically present in radar data is presented and evaluated. The aspects dealt with are non-precipitating echoes - caused either by permanent ground clutter or by anomalous propagation of the radar beam (anaprop echoes) - and also topographical beam blockage. The correction technique is based in the computation of realistic beam propagation trajectories based upon recent radiosonde observations instead of assuming standard radio propagation conditions. The correction consists of three different steps: 1) calculation of a Dynamic Elevation Map which provides the minimum clutter-free antenna elevation for each pixel within the radar coverage; 2) correction for residual anaprop, checking the vertical reflectivity gradients within the radar volume; and 3) topographical beam blockage estimation and correction using a geometric optics approach. The technique is evaluated with four case studies in the region of the Po Valley (N Italy) using a C-band Doppler radar and a network of raingauges providing hourly precipitation measurements. The case studies cover different seasons, different radio propagation conditions and also stratiform and convective precipitation type events. After applying the proposed correction, a comparison of the radar precipitation estimates with raingauges indicates a general reduction in both the root mean squared error and the fractional error variance indicating the efficiency and robustness of the procedure. Moreover, the technique presented is not computationally expensive so it seems well suited to be implemented in an operational environment.

Mass conservative three-dimensional water tracer distribution from Markov chain Monte Carlo inversion of time-lapse ground-penetrating radar data

Time-lapse geophysical measurements are widely used to monitor the movement of water and solutes through the subsurface. Yet commonly used deterministic least squares inversions typically suffer from relatively poor mass recovery, spread overestimation, and limited ability to appropriately estimate nonlinear model uncertainty. We describe herein a novel inversion methodology designed to reconstruct the three-dimensional distribution of a tracer anomaly from geophysical data and provide consistent uncertainty estimates using Markov chain Monte Carlo simulation. Posterior sampling is made tractable by using a lower-dimensional model space related both to the Legendre moments of the plume and to predefined morphological constraints. Benchmark results using cross-hole ground-penetrating radar travel times measurements during two synthetic water tracer application experiments involving increasingly complex plume geometries show that the proposed method not only conserves mass but also provides better estimates of plume morphology and posterior model uncertainty than deterministic inversion results.

The effects of a non-woven cover in combination with different soil mulches in strawberry cultivation

Selostus: Katteiden käyttö mansikanviljelyssä

Integration of ground-penetrating radar and microgravimetric methods to map shallow caves

Ground-penetrating radar (GPR) and microgravimetric surveys have been conducted in the southern Jura mountains of western Switzerland in order to map subsurface karstic features. The study site, La Grande Rolaz cave, is an extensive system in which many portions have been mapped. By using small station spacing and careful processing for the geophysical data, and by modeling these data with topographic information from within the cave, accurate interpretations have been achieved. The constraints on the interpreted geologic models are better when combining the geophysical methods than when using only one of the methods, despite the general limitations of two-dimensional (2D) profiling. For example, microgravimetry can complement GPR methods for accurately delineating a shallow cave section approximately 10 X 10 mt in size. Conversely, GPR methods can be complementary in determining cavity depths and in verifying the presence of off-line features and numerous areas of small cavities and fractures, which may be difficult to resolve in microgravimetric data.

Physical quality of an Oxisol cultivated with maize submited to cover crops in the pre-cropping period

The intensive use of land alters the distribution of the pore size which imparts consequences on the soil physical quality. The Least Limiting Water Range (LLWR) allows for the visualization of the effects of management systems upon either the improvement or the degradation of the soil physical quality. The objective of this study was to evaluate the physical quality of a Red Latosol (Oxisol) submited to cover crops in the period prior to the maize crop in a no-tillage and conventional tillage system, using porosity, soil bulk density and the LLWR as attributes. The treatments were: conventional tillage (CT) and a no-tillage system with the following cover crops: sunn hemp (Crotalaria juncea L.) (NS), pearl millet (Pennisetum americanum (L.) Leeke) (NP) and lablab (Dolichos lablab L.) (NL). The experimental design was randomized blocks in subdivided plots with six replications, with the plots being constituted by the treatments and the subplots by the layers analyzed. The no-tillage systems showed higher total porosity and soil organic matter at the 0-0.5 m layer for the CT. The CT did not differ from the NL or NS in relation to macroporosity. The NP showed the greater porosity, while CT and NS presented lower soil bulk density. No < 10 % airing porosity was found for the treatments evaluated, and value for water content where soil aeration is critical (θPA) was found above estimated water content at field capacity (θFC) for all densities. Critical soil bulk density was of 1.36 and 1.43 Mg m-3 for NP and CT, respectively. The LLWR in the no-tillage systems was limited in the upper part by the θFC, and in the bottom part, by the water content from which soil resistance to penetration is limiting (θPR). By means of LLWR it was observed that the soil presented good physical quality.

Uso de sistema GPR (Ground Penetring Radar) na avaliação de atributos de um solo sob plantio de cana-de-açúcar

O GPR utiliza técnica indireta para investigação das estruturas de subsuperfície, sendo caracterizado como método não-invasivo, o qual permite extrair informações ao longo do perfil de solo sem perfurar, sondar ou escavar. Este trabalho teve o objetivo de avaliar a utilização do GPR no estabelecimento de atributos físicos do solo em área de cultivo com cana-de-açúcar, além de estabelecer sua correlação com o método do cilindro volumétrico. A área de estudo está localizada no município de Bom Sucesso - PR, sendo utilizada com cultura da cana há mais de 20 anos. Foram obtidas amostras de solos indeformadas com cilindro volumétrico nas profundidades de 0-0,1, 0,1-0,2, 0,2-0,3, 0,3-0,4 e 0,4-0,5 m, ao longo de três transeptos paralelos, sendo o central referente à linha de plantio (transepto 2) e os outros dois correspondentes às entrelinhas laterais (transeptos 1 e 3). Os valores de densidade e porosidade total, obtidos por meio das amostras físicas, foram inicialmente interpretados para verificar o estado do solo nas linhas e nas entrelinhas de cana, nas cinco profundidades. Posteriormente, foram correlacionados com os valores das constantes dielétricas (K) adquiridos pelo georradar, porém apenas para a camada de 0,4-0,5 m, uma vez que as camadas superficiais até a profundidade de 0,4 m não puderam ser avaliadas devido às limitações técnicas do equipamento, aliadas às condições físicas e químicas do solo, que acabaram por prejudicar as reflexões. A densidade mostrou-se menor nas linhas, quando comparada às entrelinhas, para as camadas de 0-0,1 e 0,2-0,3 m. A porosidade total foi menor nas entrelinhas do que nas linhas na camada de 0-0,1 m. Os valores de K foram maiores nas linhas, onde a umidade e a porosidade total foram maiores, e menores nas entrelinhas, onde as densidades encontravam se próximas ao limite crítico. A correlação de K com a densidade e porosidade total não foi significativa. Pequenas modificações na porosidade do solo em função do aumento da densidade foram suficientes para diminuir o valor de K nas entrelinhas, devido à redução na quantidade de água nos poros. Esse fato pode ser confirmado pela correlação de K com a umidade. Assim, pode-se dizer que o georradar foi extremamente sensível à variação de umidade no solo, apresentando melhores resultados para esta variável do que para a densidade e porosidade total determinada por meio do cilindro volumétrico.

Morphostructural characterization of soil conventionally tilled with mechanized and animal traction with and without cover crop

The structural stability and restructuring ability of a soil are related to the methods of crop management and soil preparation. A recommended strategy to reduce the effects of soil preparation is to use crop rotation and cover crops that help conserve and restore the soil structure. The aim of this study was to evaluate and quantify the homogeneous morphological units in soil under conventional mechanized tillage and animal traction, as well as to assess the effect on the soil structure of intercropping with jack bean (Canavalia ensiformis L.). Profiles were analyzed in April of 2006, in five counties in the Southern-Central region of Paraná State (Brazil), on family farms producing maize (Zea mays L.), sometimes intercropped with jack bean. The current structures in the crop profile were analyzed using Geographic Information Systems (GIS) and subsequently principal component analysis (PCA) to generate statistics. Morphostructural soil analysis showed a predominance of compact units in areas of high-intensity cultivation under mechanized traction. The cover crop did not improve the structure of the soil with low porosity and compact units that hamper the root system growth. In areas exposed to animal traction, a predominance of cracked units was observed, where roots grew around the clods and along the gaps between them.