Targeting iron-mediated retinal degeneration by local delivery of transferrin.

Iron is essential for retinal function but contributes to oxidative stress-mediated degeneration. Iron retinal homeostasis is highly regulated and transferrin (Tf), a potent iron chelator, is endogenously secreted by retinal cells. In this study, therapeutic potential of a local Tf delivery was evaluated in animal models of retinal degeneration. After intravitreal injection, Tf spread rapidly within the retina and accumulated in photoreceptors and retinal pigment epithelium, before reaching the blood circulation. Tf injected in the vitreous prior and, to a lesser extent, after light-induced retinal degeneration, efficiently protected the retina histology and function. We found an association between Tf treatment and the modulation of iron homeostasis resulting in a decrease of iron content and oxidative stress marker. The immunomodulation function of Tf could be seen through a reduction in macrophage/microglial activation as well as modulated inflammation responses. In a mouse model of hemochromatosis, Tf had the capacity to clear abnormal iron accumulation from retinas. And in the slow P23H rat model of retinal degeneration, a sustained release of Tf in the vitreous via non-viral gene therapy efficently slowed-down the photoreceptors death and preserved their function. These results clearly demonstrate the synergistic neuroprotective roles of Tf against retinal degeneration and allow identify Tf as an innovative and not toxic therapy for retinal diseases associated with oxidative stress.

Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials

Rapid manufacturing is an advanced manufacturing technology based on layer-by-layer manufacturing to produce a part. This paper presents experimental work carried out to investigate the effects of scan speed, layer thickness, and building direction on the following part features: dimensional error, surface roughness, and mechanical properties for DMLS with DS H20 powder and SLM with CL 20 powder (1.4404/AISI 316L). Findings were evaluated using ANOVA analysis. According to the experimental results, build direction has a significant effect on part quality, in terms of dimensional error and surface roughness. For the SLM process, the build direction has no influence on mechanical properties. Results of this research support industry estimating part quality and mechanical properties before the production of parts with additive manufacturing, using iron-based powders

Markers of iron metabolism and metabolic syndrome in Swiss adults

Plusieurs études populationnelles ont montré l'existence d'une association entre des taux sanguins élevés de transferrine et le syndrome métabolique (SM). Bien que cette association soit bien établie, restent encore à être décrites les associations entre le SM et les autres marqueurs sanguins du métabolisme du fer, tels que le fer, la transferrine (Tsf), la capacité totale de fixation de la transferrine (CTF) ou la saturation de la transferrine (SaTsf) sanguins. Le but de notre étude a été d'identifier les associations entre les différents marqueurs du métabolisme du fer (fer, ferritine, Tsf, CTF et SaTsf) et le SM. Les données de l'étude CoLaus, récoltées entre 2003 et 2006, ont été utilisées. Le SM était défini selon les critères du National Cholesterol Education Program Adult Panel III. L'analyse statistique a été faite en stratifiant selon le genre ainsi que le status ménopausal chez les femmes. Des 6733 participants, 1235 (18%) ont été exclus de fait d'absence de données concernant les variables qui nous intéressaient, ou chez qui nous avons soupçonné une possible hémochromatose non diagnostiquée (SaTsf> 50%). Des 5498 participants restant (âge moyen ± écart-type: 53 ± 11 ans), 2596 étaient des hommes, 1285 des femmes pré- et 1617 des femmes postménopausées. La prévalence du SM était de 29,4% chez les hommes, 8,3% et 25,5% chez les femmes pré- et postménopausées, respectivement. Dans les trois groupes, la prévalence du SM était la plus haute dans les quartiles les plus élevés de ferritine, Tsf et CTF, ainsi que dans le quartile le plus bas de SaTsf. Après ajustement sur l'âge, l'indice de masse corporelle, la protéine C réactive, la consommation de tabac et/ou d'alcool, la prise de suppléments en fer et les marqueurs hépatiques, l'appartenance au quartile le plus élevé de ferritine, Tsf ou CTF était associée à un risque plus important de SM chez les hommes et les femmes postménopausées : Odds ratio (OR) et [intervalle de confiance à 95%] pour la ferritine 1.44 [1.07-1.94] et 1.47 [0.99-2.17]; pour la Tsf et la CTF, OR=1.43 [1.06-1.91] et 2.13 [1.44-3.15] pour les hommes et les femmes postménopausées, respectivement. Au contraire, l'appartenance au quartile le plus élevé de la SaTsf était associé à un risque moins important de SM: OR=0.77 [0.57-1.05] et 0.59 [0.39-0.90] pour les hommes et les femmes postménopausées, respectivement. Il n'y avait aucune association entre les marqueurs sanguins du métabolisme du fer et le SM chez les femmes préménopausées, ni entre le fer sanguin et le SM chez les trois groupes. En conclusion, la majorité des marqueurs sanguins du métabolisme du fer, mais pas le fer lui-même, sont associés de manière indépendante au SM chez les hommes et les femmes postménopausées. -- Context: Excessive iron storage has been associated with metabolic syndrome (MS). Objective: To assess the association between markers of iron metabolism and MS in a healthy population. Design: Cross-sectional study conducted between 2003 and 2006. Setting: Population-based study in Lausanne, Switzerland. Patients: 5,498 participants aged 35-75 years, stratified by sex and menopausal status. Participants with transferrin saturation (TSAT) >50% were excluded. Intervention: None. Main Outcome Measures: serum iron, ferritin, transferrin, total iron binding capacity (TIBC) and TSAT. MS was defined according to ATP-III criteria. Results: Prevalence of MS was 29.4% in men, 8.3% in premenopausal and 25.5% in postmenopausal women. On bivariate analysis, the highest prevalence of MS occurred in the highest quartiles of serum ferritin, transferrin and TIBC, and in the lowest quartile of TSAT. After multivariate adjustment for age, body mass index, C-reactive protein, smoking, alcohol, liver markers and iron supplementation, men and postmenopausal women in the highest quartile of serum ferritin, transferrin and TIBC had a higher risk of presenting with MS: for ferritin, Odds ratio and [95% CI]=1.44 [1.07-1.94] for men and 1.47 [0.99-2.17] for postmenopausal women; for transferrin and TIBC, OR=1.43 [1.06-1.91] and 2.13 [1.44-3.15], Participants in the highest quartile of TSAT had a lower risk of MS: OR=0.77 [0.57-1.05] for men and 0.59 [0.39-0.90] for postmenopausal women. No association was found between iron and MS and between markers of iron metabolism and MS in premenopausal women. Conclusion: Ferritin, transferrin, TIBC are positively and TSAT is negatively associated with MS in men and postmenopausal women.

Effects of oral supplementation of iron on hepcidin blood concentrations among non-anaemic female blood donors: a randomized controlled trial.

BACKGROUND AND OBJECTIVES: Hepcidin is the main hormone that regulates iron balance. Its lowering favours digestive iron absorption in cases of iron deficiency or enhanced erythropoiesis. The careful dosage of this small peptide promises new diagnostic and therapeutic strategies. Its measurement is progressively being validated and now its clinical value must be explored in different physiological situations. Here, we evaluate hepcidin levels among premenopausal female donors with iron deficiency without anaemia. MATERIALS AND METHODS: In a preceding study, a 4-week oral iron treatment (80 mg/day) was administered in a randomized controlled trial (n = 145), in cases of iron deficiency without anaemia after a blood donation. We subsequently measured hepcidin at baseline and after 4 weeks of treatment, using mass spectrometry. RESULTS: Iron supplementation had a significant effect on plasma hepcidin compared to the placebo arm at 4 weeks [+0·29 nm [95% CI: 0·18 to 0·40]). There was a significant correlation between hepcidin and ferritin at baseline (R(2) = 0·121, P < 0·001) and after treatment (R(2) = 0·436, P < 0·001). Hepcidin levels at baseline were not predictive of concentration changes for ferritin or haemoglobin. However, hepcidin levels at 4 weeks were significantly higher (0·79 nm [95% CI: 0·53 to 1·05]) among ferritin responders. CONCLUSIONS: This study shows that a 4-week oral treatment of iron increased hepcidin blood concentrations in female blood donors with an initial ferritin concentration of less than 30 ng/ml. Apparently, hepcidin cannot serve as a predictor of response to iron treatment but might serve as a marker of the iron repletion needed for erythropoiesis.

Supramolecular Gold Metallogelators: The Key Role of Metallophilic Interactions

Gold metallogelators is an emerging area of research. The number of results published in the literature is still scarce. The majority of these gels is observed in organic solvents, and the potential applications are still to be explored. In this work, we present an overview about gold metallogelators divided in two different groups depending on the type of solvent used in the gelation process (organogelators and hydrogelators). A careful analysis of the data shows that aurophilic interactions are a common motif directly involved in gelation involving Au(I) complexes. There are also some Au(III) derivatives able to produce gels but in this case the organic ligands determine the aggregation process. A last section is included about the potential applications that have been reported until now with this new and amazing class of supramolecular assemblies.

Modeling of Gold Cyanidation

The chemistry of gold dissolution in alkaline cyanide solution has continually received attention and new rate equations expressing the gold leaching are still developed. The effect of leaching parameters on gold gold cyanidation is studied in this work in order to optimize the leaching process. A gold leaching model, based on the well-known shrinking-core model, is presented in this work. It is proposed that the reaction takes place at the reacting particle surface which is continuously reduced as the reaction proceeds. The model parameters are estimated by comparing experimental data and simulations. The experimental data used in this work was obtained from Ling et al. (1996) and de Andrade Lima and Hodouin (2005). Two different rate equations, where the unreacted amount of gold is considered in one equation, are investigated. In this work, it is presented that the reaction at the surface is the rate controlling step since there is no internal diffusion limitation. The model considering the effect of non-reacting gold shows that the reaction orders are consistent with the experimental observations reported by Ling et al. (1996) and de Andrade Lima and Hodouin (2005). However, it should be noted that the model obtained in this work is based on assumptions of no side reactions, no solid-liquid mass transfer resistances and no effect from temperature.

Non-Linear Journal Bearing Model for Analysis of Superharmonic Vibrations of Rotor Systems

A rotating machine usually consists of a rotor and bearings that supports it. The nonidealities in these components may excite vibration of the rotating system. The uncontrolled vibrations may lead to excessive wearing of the components of the rotating machine or reduce the process quality. Vibrations may be harmful even when amplitudes are seemingly low, as is usually the case in superharmonic vibration that takes place below the first critical speed of the rotating machine. Superharmonic vibration is excited when the rotational velocity of the machine is a fraction of the natural frequency of the system. In such a situation, a part of the machine’s rotational energy is transformed into vibration energy. The amount of vibration energy should be minimised in the design of rotating machines. The superharmonic vibration phenomena can be studied by analysing the coupled rotor-bearing system employing a multibody simulation approach. This research is focused on the modelling of hydrodynamic journal bearings and rotorbearing systems supported by journal bearings. In particular, the non-idealities affecting the rotor-bearing system and their effect on the superharmonic vibration of the rotating system are analysed. A comparison of computationally efficient journal bearing models is carried out in order to validate one model for further development. The selected bearing model is improved in order to take the waviness of the shaft journal into account. The improved model is implemented and analyzed in a multibody simulation code. A rotor-bearing system that consists of a flexible tube roll, two journal bearings and a supporting structure is analysed employing the multibody simulation technique. The modelled non-idealities are the shell thickness variation in the tube roll and the waviness of the shaft journal in the bearing assembly. Both modelled non-idealities may cause subharmonic resonance in the system. In multibody simulation, the coupled effect of the non-idealities can be captured in the analysis. Additionally one non-ideality is presented that does not excite the vibrations itself but affects the response of the rotorbearing system, namely the waviness of the bearing bushing which is the non-rotating part of the bearing system. The modelled system is verified with measurements performed on a test rig. In the measurements the waviness of bearing bushing was not measured and therefore it’s affect on the response was not verified. In conclusion, the selected modelling approach is an appropriate method when analysing the response of the rotor-bearing system. When comparing the simulated results to the measured ones, the overall agreement between the results is concluded to be good.

Effect of adsorbed polyaniline on the thermal stability of iron and arsenic oxides

Iron and arsenic oxide grains are coated with the conducting organic polymer polyaniline. The obtained samples were characterized by infrared spectroscopy, SEM, conducting measurements and thermogravimetry. The thermal stability of both oxides are increased. For As2O3 the sublimation temperature is increased from 165ºC in the pure oxide to 206ºC in the polymer modified sample. The pure Fe3O4 sample exhibits sublimation at 780ºC whereas the polyaniline coated oxide is stable until at least 1000ºC.

Radio Frequency Measurement Method for Detecting Bearing Currents in Induction Motors

Induction motors are widely used in industry, and they are generally considered very reliable. They often have a critical role in industrial processes, and their failure can lead to significant losses as a result of shutdown times. Typical failures of induction motors can be classified into stator, rotor, and bearing failures. One of the reasons for a bearing damage and eventually a bearing failure is bearing currents. Bearing currents in induction motors can be divided into two main categories; classical bearing currents and inverter-induced bearing currents. A bearing damage caused by bearing currents results, for instance, from electrical discharges that take place through the lubricant film between the raceways of the inner and the outer ring and the rolling elements of a bearing. This phenomenon can be considered similar to the one of electrical discharge machining, where material is removed by a series of rapidly recurring electrical arcing discharges between an electrode and a workpiece. This thesis concentrates on bearing currents with a special reference to bearing current detection in induction motors. A bearing current detection method based on radio frequency impulse reception and detection is studied. The thesis describes how a motor can work as a “spark gap” transmitter and discusses a discharge in a bearing as a source of radio frequency impulse. It is shown that a discharge, occurring due to bearing currents, can be detected at a distance of several meters from the motor. The issues of interference, detection, and location techniques are discussed. The applicability of the method is shown with a series of measurements with a specially constructed test motor and an unmodified frequency-converter-driven motor. The radio frequency method studied provides a nonintrusive method to detect harmful bearing currents in the drive system. If bearing current mitigation techniques are applied, their effectiveness can be immediately verified with the proposed method. The method also gives a tool to estimate the harmfulness of the bearing currents by making it possible to detect and locate individual discharges inside the bearings of electric motors.

Novel neutral iron(II) isocyanide maleonitrile dithiolate [Fe(S2C2(CN)2)(t-BuNC) 4] compound

FeBr2 reacts with the S2C2(CN)2(2-) ion (1:1 ratio) in the presence of an excess of t-BuNC in THF to give the mixed ligand [Fe(S2C2(CN)2)(t-BuNC) 4] compound. This neutral product with a formal oxidation state of two for the iron atom was characterized by conductivity measurements, and, i.r., Mössbauer, 13C and ¹H n.m.r. spectroscopy. There is a Fe-C pi back-donation strengthened towards isocyanide ligands, according to the data of 13C, ¹H n.m.r. and Mössbauer spectroscopy.

Solid phase extraction of iron and lead in environmental matrices on amberlite xad-1180/pv

A solid phase extraction procedure using Amberlite XAD-1180/Pyrocatechol violet (PV) chelating resin for the determination of iron and lead ions in various environmental samples was established. The procedure is based on the sorption of lead(II) and iron(III) ions onto the resin at pH 9, followed by elution with 1 mol/L HNO3 and determination by flame atomic absorption spectrometry. The influence of alkaline, earth alkaline and some transition metals, as interferents, are discussed. The recoveries for the spiked analytes were greater than 95%. The detection limits for lead and iron by FAAS were 0.37 µg/L and 0.20 µg/L, respectively. Validation of the method described here was performed by using three certified reference materials (SRM 1515 Apple Leaves, SRM 2711 Montana Soil and NRCC-SLRS-4 Riverine Water). The procedure was successfully applied to natural waters and human hair.

Triggering the generation of an iron(IV)-oxo compound and its reactivity toward sulfides by RuII photocatalysis

The preparation of [FeIV(O)(MePy2tacn)]2+ (2, MePy2tacn = N-methyl-N,N-bis(2-picolyl)-1,4,7-triazacyclononane) by reaction of [FeII(MePy2tacn)(solvent)]2+ (1) and PhIO in CH3CN and its full characterization are described. This compound can also be prepared photochemically from its iron(II) precursor by irradiation at 447 nm in the presence of catalytic amounts of [Ru II(bpy)3]2+ as photosensitizer and a sacrificial electron acceptor (Na2S2O8). Remarkably, the rate of the reaction of the photochemically prepared compound 2 toward sulfides increases 150-fold under irradiation, and 2 is partially regenerated after the sulfide has been consumed; hence, the process can be repeated several times. The origin of this rate enhancement has been established by studying the reaction of chemically generated compound 2 with sulfides under different conditions, which demonstrated that both light and [Ru II(bpy)3]2+ are necessary for the observed increase in the reaction rate. A combination of nanosecond time-resolved absorption spectroscopy with laser pulse excitation and other mechanistic studies has led to the conclusion that an electron transfer mechanism is the most plausible explanation for the observed rate enhancement. According to this mechanism, the in-situ-generated [RuIII(bpy)3] 3+ oxidizes the sulfide to form the corresponding radical cation, which is eventually oxidized by 2 to the corresponding sulfoxide