871 resultados para Geographic information systems -- Data processing
Resumo:
Runtime management of distributed information systems is a complex and costly activity. One of the main challenges that must be addressed is obtaining a complete and updated view of all the managed runtime resources. This article presents a monitoring architecture for heterogeneous and distributed information systems. It is composed of two elements: an information model and an agent infrastructure. The model negates the complexity and variability of these systems and enables the abstraction over non-relevant details. The infrastructure uses this information model to monitor and manage the modeled environment, performing and detecting changes in execution time. The agents infrastructure is further detailed and its components and the relationships between them are explained. Moreover, the proposal is validated through a set of agents that instrument the JEE Glassfish application server, paying special attention to support distributed configuration scenarios.
Resumo:
Knowledge management is critical for the success of virtual communities, especially in the case of distributed working groups. A representative example of this scenario is the distributed software development, where it is necessary an optimal coordination to avoid common problems such as duplicated work. In this paper the feasibility of using the workflow technology as a knowledge management system is discussed, and a practical use case is presented. This use case is an information system that has been deployed within a banking environment. It combines common workflow technology with a new conception of the interaction among participants through the extension of existing definition languages.
Resumo:
A Digital Elevation Model (DEM) provides the information basis used for many geographic applications such as topographic and geomorphologic studies, landscape through GIS (Geographic Information Systems) among others. The DEM capacity to represent Earth?s surface depends on the surface roughness and the resolution used. Each DEM pixel depends on the scale used characterized by two variables: resolution and extension of the area studied. DEMs can vary in resolution and accuracy by the production method, although there are statistical characteristics that keep constant or very similar in a wide range of scales. Based on this property, several techniques have been applied to characterize DEM through multiscale analysis directly related to fractal geometry: multifractal spectrum and the structure function. The comparison of the results by both methods is discussed. The study area is represented by a 1024 x 1024 data matrix obtained from a DEM with a resolution of 10 x 10 m each point, which correspond with a region known as ?Monte de El Pardo? a property of Spanish National Heritage (Patrimonio Nacional Español) of 15820 Ha located to a short distance from the center of Madrid. Manzanares River goes through this area from North to South. In the southern area a reservoir is found with a capacity of 43 hm3, with an altitude of 603.3 m till 632 m when it is at the highest capacity. In the middle of the reservoir the minimum altitude of this area is achieved.
Resumo:
Los Sistemas de Información Geográfica están desarrollados para gestionar grandes volúmenes de datos, y disponen de numerosas funcionalidades orientadas a la captura, almacenamiento, edición, organización, procesado, análisis, o a la representación de información geográficamente referenciada. Por otro lado, los simuladores industriales para entrenamiento en tareas de conducción son aplicaciones en tiempo real que necesitan de un entorno virtual, ya sea geoespecífico, geogenérico, o combinación de ambos tipos, sobre el cual se ejecutarán los programas propios de la simulación. Este entorno, en última instancia, constituye un lugar geográfico, con sus características específicas geométricas, de aspecto, funcionales, topológicas, etc. Al conjunto de elementos que permiten la creación del entorno virtual de simulación dentro del cual se puede mover el usuario del simulador se denomina habitualmente Base de Datos del Visual (BDV). La idea principal del trabajo que se desarrolla aborda un tema del máximo interés en el campo de los simuladores industriales de formación, como es el problema que presenta el análisis, la estructuración, y la descripción de los entornos virtuales a emplear en los grandes simuladores de conducción. En este artículo se propone una metodología de trabajo en la que se aprovechan las capacidades y ventajas de los Sistemas de Información Geográfica para organizar, optimizar y gestionar la base de datos visual del simulador, y para mejorar la calidad y el rendimiento del simulador en general. ABSTRACT Geographic Information Systems are developed to handle enormous volumes of data and are equipped with numerous functionalities intended to capture, store, edit, organise, process and analyse or represent the geographically referenced information. On the other hand, industrial simulators for driver training are real-time applications that require a virtual environment, either geospecific, geogeneric or a combination of the two, over which the simulation programs will be run. In the final instance, this environment constitutes a geographic location with its specific characteristics of geometry, appearance, functionality, topography, etc. The set of elements that enables the virtual simulation environment to be created and in which the simulator user can move, is usually called the Visual Database (VDB). The main idea behind the work being developed approaches a topic that is of major interest in the field of industrial training simulators, which is the problem of analysing, structuring and describing the virtual environments to be used in large driving simulators. This paper sets out a methodology that uses the capabilities and benefits of Geographic Information Systems for organising, optimising and managing the visual Database of the simulator and for generally enhancing the quality and performance of the simulator.
Resumo:
One of the main problems in urban areas is the steady growth in car ownership and traffic levels. Therefore, the challenge of sustainability is focused on a shift of the demand for mobility from cars to collective means of transport. For this end, buses are a key element of the public transport systems. In this respect Real Time Passenger Information (RTPI) systems help citizens change their travel behaviour towards more sustainable transport modes. This paper provides an assessment methodology which evaluates how RTPI systems improve the quality of bus services in two European cities, Madrid and Bremerhaven. In the case of Madrid, bus punctuality has increased by 3%. Regarding the travellers perception, Madrid raised its quality of service by 6% while Bremerhaven increased by 13%. On the other hand, the users ́ perception of Public Transport (PT) image increased by 14%.
Resumo:
El objetivo de este proyecto es el estudio y creación de un mapa de susceptibilidad al alcance por caída de bloques en la Sierra de la Cabrera, provincia de Madrid. Por lo cual se ha realizado, primero, un reconocimiento de campo in situ y, a continuación, un estudio morfométrico del área, empleando sistemas de información geográfica (ArcGIS), así como un análisis cualitativo de las características estructurales de las discontinuidades seleccionando aquellas más determinantes para favorecer el desprendimiento de un bloque rocoso y aportar la información suficiente que permita evaluar la susceptibilidad. El análisis se ha llevado a cabo partiendo de los datos estructurales obtenidos en campo y cotejados con los realizados en otros trabajos. Así se han podido delimitar distintas áreas fuente, donde se puede producir el desprendimiento, y el perímetro de alcance a través de un modelo geométrico. A partir de este modelo, se determinarán las zonas de posible afección, generando una cartografía de susceptibilidad para el área de estudio. ABSTRACT The aim of this project is to study and create a susceptibility map of rockfalling reach in the Sierra de la Cabrera, Madrid. To achieve this goal it is been made, firstly, a field trip and, then, a morphometric study of the area, using geographic information systems (ArcGIS), and also a qualitative analysis of the structural characteristics of the discontinuities choosing those decisives contributing to the rock block’s detach and to provide enough information to evaluate the susceptibility. The analysis is been carried out using structural data got on field and from other studies. In this way, there have been defined different source areas, where rockfalling can occur, and a reaching perimeter using a geometric model. For this model, affected areas can be established and a susceptibility map can be created for the studied area.
Resumo:
En cumplimiento de la Directiva 2002/49/CE en lo referente a carreteras, se han llevado a cabo en España, en el año 2007, los mapas estratégicos de ruido (MER) de los grandes ejes viarios de más de 6 millones de vehículos / año (datos 2006). En esta categoría se encuentra la carretera A-3 a su paso por el Campus Sur de la U.P.M. De acuerdo con el pliego de prescripciones técnicas, estos MER se dividen en fase A o de estudio básico y fase B o de estudio de detalle. En el proyecto denominado “Realización de Mapa Estratégico de Ruido de las carreteras de la Red del Estado (A-3 - Zona Campus sur de la U.P.M.)” se muestran los resultados de información pública de fase A del Mapa Estratégico de Ruido (MER) para la carretera A-3 en la Comunidad de Madrid. Teniendo en cuenta dichos resultados y la no elección del Campus Sur en la fase B (detalle) de dicho MER; en el presente proyecto se realiza el Mapa Estratégico de fase B del Campus Sur de la U.P.M. para el gran ejes viarios (A-3), de cumplimiento de la Directiva 2002/49/CE y siguiendo las indicaciones del pliego de prescripciones técnicas para esta primera fase de entregas de 2007 y utilizando para ello Sistemas de Información Geográfica (SIG). Se justifica, según los resultados obtenidos, si hubiera sido necesaria su inclusión en esta fase de estudio. Una vez establecidas las diferencias entre Mapa Estratégico de Ruido (MER) y Mapa de Ruido (MR), se analizan los diversos criterios técnicos que debe tomar un consultor acústico durante la realización de un MER y cómo estos pueden afectar al resultado final siendo todos ellos válidos pero creando una falta de homogeneidad entre los diferentes MER según el autor del estudio. Se describen las diferentes acciones que se están tomando tras la entrega de 2007 para intentar solucionar este problema de cara a las nuevas entregas. ABSTRACT: The environmental Noise Directive 2002/49/EC has clear requirements to Member States in terms of Strategic Noise Maps according to roads. So, have been carried out in Spain, in 2007, Strategic Noise Maps of the major roads which have more than six million vehicle passages a year (2006 data) where the A-3 road near “Campus Sur U.P.M.” is included. In accord with the statement of technical requirements, these Strategic Noise Maps are divided into A phase (Basic study) and B phase (detailed study). The present project by the name of "Implementation of Strategic Noise Map of Spanish Roads (A-3 – Campus Sur U.P.M. area)" shows the results of Strategic Noise Map for the A-3 in the Community of Madrid (A phase, public information – EGRA project Spanish Ministry of Transport). According to de study results and the not election of “Campus Sur” to B phase (detail), in this project has been made the B phase of Strategic Map in compliance with Directive 2002/49/EC, following the technical requirements specifications for the first phase of deliveries (2007) and using Geographic Information Systems (GIS) to carry on them. Is justified, in accordance with the results, if it was necessary to include “Campus Sur” in this B phase of study. Once established the differences between Strategic Noise Map and Noise Map, the present project examines the technical criteria that must take an acoustic consultant for the realization of a Strategic Map and how these criteria could affect the quality of the final results being all of them valid but it generate a lack of homogeneity between the different Strategic Noise Map by the author of the study. There wasn’t so much experience in Spain in the methodology proposed by the European Noise Directive. The actions that are being taken after delivery of 2007 to try to solve this problem and get harmonized the results among the whole network for the new deliveries each five years are shown at the present project.
Resumo:
Information Technologies are complex and this is true even in the smallest piece of equipment. But this kind of complexity is nothing comparejwith the one that arises when this technology interact with society. Office Automation has been traditionally considered as a technical field but there is no way to find solutions from a technical point of view when the problems are primarily social in their origin. Technology management has to change its focus from a pure technical perspective to a sociotechnical point of view. To facilitate this change, we propose a model that allows a better understanding between the managerial and the technical world, offering a coherent, complete and integrated perspective of both. The base for this model is an unfolding of the complexity found in information Technologies and a matching of these complexities with several levels considered within the Office, Office Automation and Human Factors dimensions. Each one of these domains is studied trough a set of distinctions that create a new and powerful understanding of its reality. Using this model we build up a map of Office Automation to be use^not only by managers but also by technicians because the primaty advantage of such a framework is that it allows a comprehensive evaluation of technology without requhing extensive technical knowledge. Thus, the model can be seen as principle for design and diagnosis of Office Automation and as a common reference for managers and specialist avoiding the severe limitations arising from the language used by the last
Resumo:
Assets are interrelated in risk analysis methodologies for information systems promoted by international standards. This means that an attack on one asset can be propagated through the network and threaten an organization's most valuable assets. It is necessary to valuate all assets, the direct and indirect asset dependencies, as well as the probability of threats and the resulting asset degradation. These methodologies do not, however, consider uncertain valuations and use precise values on different scales, usually percentages. Linguistic terms are used by the experts to represent assets values, dependencies and frequency and asset degradation associated with possible threats. Computations are based on the trapezoidal fuzzy numbers associated with these linguistic terms.
Resumo:
We propose a fuzzy approach to deal with risk analysis for information systems. We extend MAGERIT methodology that valuates the asset dependencies to a fuzzy framework adding fuzzy linguistic terms to valuate the different elements (terminal asset values, asset dependencies as well as the probability of threats and the resulting asset degradation) in risk analysis. Computations are based on the trapezoidal fuzzy numbers associated with these linguistic terms and, finally, the results of these operations are translated into a linguistic term by means of a similarity function.
Resumo:
One of the main problems in urban areas is the steady growth in car ownership and traffic levels. Therefore, the challenge of sustainability is focused on a shift of the demand for mobility from cars to collective means of transport. For this purpose, buses are a key element of the public transport systems. In this respect Real Time Passenger Information (RTPI) systems help people change their travel behaviour towards more sustainable transport modes. This paper provides an assessment methodology which evaluates how RTPI systems improve the quality of bus services performance in two European cities, Madrid and Bremerhaven. In the case of Madrid, bus punctuality has increased by 3%. Regarding the travellers perception, Madrid raised its quality of service by 6% while Bremerhaven increased by 13%. On the other hand, the users¿ perception of Public Transport (PT) image increased by 14%.
Resumo:
This work highlights two critical taboos in organizations: 1)taking for granted the quality of certain capabilities and attitudes of the end-user representatives (EUR) in information systems development projects (ISDP), and 2) the EUR´s inherent accountability for losses in IS investments. These issues are neither addressed by theory nor research when assessing success/ failure. A triangulation approach was applied to combine quantitative and qualitative methods, having convergent results and showing that in problematic cases, paradoxically, the origin of IS rejection by end users (EU) points towards the EUR themselves. It has been evaluated to what extent some EUR factors impacted a macro ISDP involving an enterprise resource planning (ERP) package, ranking the ‘knowledge of the EUR’ as the main latent variable. The results validate some issues found throughout decades of praxis, confirming that when not properly managed the EUR role by itself has a direct relationship with IS rejection and significant losses in IS investments.