Processi integrati per l’intensificazione di processo: reazione di fotocatalisi accoppiata alla pervaporazione, la dialisi e all’ozonizzazione

L’accoppiamento di diverse operazioni unitarie può in certi casi portare ad una cosiddetta “intensificazione di processo”, cioè ad un aumento sostanziale delle rese, dell’efficienza e della sostenibilità. Nel presente lavoro sono state pertanto analizzate le potenzialità di accoppiamento della fotocatalisi, il più studiato tra i “processi di ossidazione avanzata”, sia con alcuni processi a membrana per la sintesi verde di aromi sia con l’ozonizzazione per la depurazione di acque. È stato dimostrato che in entrambi i casi l’ottenimento di una significativa intensificazione di processo dipende in gran parte dai parametri operativi, in particolare dal rapporto, delta, tra la velocità caratteristica di fotocatalisi e quella del processo accoppiato. Nel caso della sintesi di aromi, in cui la fotocatalisi viene accoppiata con la pervaporazione o con la dialisi ricircolando al reattore il retentato dalla cella con la membrana. Il parametro delta dipende dalla velocità di reazione, dalle proprietà di trasporto delle membrane e naturalmente dal volume del rettore e dall’area della membrana. La reazione fotocatalitica produce l’aroma, ad esempio vanillina da acido ferulico, per ossidazione parziale e grazie al recupero del prodotto se ne evita l’ulteriore ossidazione aumentandone pertanto la resa. L’operare in apparati separati offre diversi vantaggi come la possibilità di variare senza vincoli il rapporto tra area della membrana e volume del reattore, ma impone di considerare anche il grado effettivo di accoppiamento dei processi. In questo caso, come evidenziato dal modello matematico, un sufficientemente elevato rapporto di ricircolo consente comunque di integrare efficacemente i processi. Nell’ozonizzazione fotocatalitica si hanno due importanti vantaggi: l’aumento della velocità di degradazione grazie alla sinergia tra i processi e la capacità di controllare la formazione di prodotti pericolosi. La sinergia viene massimizzata ad un valore ottimale di delta, mentre la formazione dei prodotti indesiderati viene controllata operando secondo le procedure che sono state individuate.

Strumenti di prevenzione e riduzione degli sprechi alimentari. Un piano nazionale per l'Italia

Negli ultimi anni lo spreco alimentare ha assunto un’importanza crescente nel dibattito internazionale, politico ed accademico, nel contesto delle tematiche sulla sostenibilità dei modelli di produzione e consumo, sull’uso efficiente delle risorse e la gestione dei rifiuti. Nei prossimi anni gli Stati Membri dell’Unione Europea saranno chiamati ad adottare specifiche strategie di prevenzione degli sprechi alimentari all’interno di una cornice di riferimento comune. Tale cornice è quella che si va delineando nel corso del progetto Europeo di ricerca “FUSIONS” (7FP) che, nel 2014, ha elaborato un framework di riferimento per la definizione di “food waste” allo scopo di armonizzare le diverse metodologie di quantificazione adottate dai paesi membri. In questo scenario, ai fini della predisposizione di un Piano Nazionale di Prevenzione degli Sprechi Alimentari per l’Italia, il presente lavoro applica per la prima volta il “definitional framework” FUSIONS per l’analisi dei dati e l’identificazione dei principali flussi nei diversi anelli della filiera e svolge un estesa consultazione degli stakeholder (e della letteratura) per identificare le possibili misure di prevenzione e le priorità di azione. I risultati ottenuti evedenziano (tra le altre cose) la necessità di predisporre e promuovere a livello nazionale l’adozione di misure uniformi di quantificazione e reporting; l’importanza del coinvolgimento degli stakeholder nel contesto di una campagna nazionale di prevenzione degli sprechi alimentari; l’esigenza di garantire una adeguata copertura economica per le attività di pianificazione e implementazione delle misure di prevenzione da parte degli enti locali e di un coordinamento a livello nazionale della programmazione regionale; la necessità di una armonizzazione/semplificazione del quadro di riferimento normativo (fiscale, igienico-sanitario, procedurale) che disciplina la donazione delle eccedenze alimentari; l’urgenza di approfondire il fenomeno degli sprechi alimentari attraverso la realizzazione di studi di settore negli stadi a valle della filiera.

A mesoscopic simulation method for electrolyte solutions

This thesis deals with the development of a novel simulation technique for macromolecules in electrolyte solutions, with the aim of a performance improvement over current molecular-dynamics based simulation methods. In solutions containing charged macromolecules and salt ions, it is the complex interplay of electrostatic interactions and hydrodynamics that determines the equilibrium and non-equilibrium behavior. However, the treatment of the solvent and dissolved ions makes up the major part of the computational effort. Thus an efficient modeling of both components is essential for the performance of a method. With the novel method we approach the solvent in a coarse-grained fashion and replace the explicit-ion description by a dynamic mean-field treatment. Hence we combine particle- and field-based descriptions in a hybrid method and thereby effectively solve the electrokinetic equations. The developed algorithm is tested extensively in terms of accuracy and performance, and suitable parameter sets are determined. As a first application we study charged polymer solutions (polyelectrolytes) in shear flow with focus on their viscoelastic properties. Here we also include semidilute solutions, which are computationally demanding. Secondly we study the electro-osmotic flow on superhydrophobic surfaces, where we perform a detailed comparison to theoretical predictions.

Il linguaggio valutativo nel bilancio di sostenibilità: analisi trilingue basata su corpora

The aim of this dissertation is to analyze the language of evaluation in Italian, English and French sustainability reports in order to observe how firms build their corporate image and to investigate the kind of relationship they develop with their stakeholders. The analysis is carried out by applying Martin & White's Appraisal theory and corpus linguistics methods. For the purposes of this research, a multilingual specialized corpus of sustainability reports has been created, which is the result of two different levels of compilation. At the first level, three sub-corpora have been created with the aim of representing three different languages (Italian, English and French): at this level, the research on evaluative language will show that a standardization process of sustainability reports is underway. At the second level of compilation, each of the three sub-corpora has been split in two further sub-corpora, representative of two different business sectors: at this level, the research will show how the sector where firms operate directly influences the choice of the topics to be discussed. The first chapter of this dissertation introduces the concept of evaluative language, with a particular focus on the framework of Appraisal theory. The second chapter deals with corpus linguistics and describes different types of corpora, the search methods and the criteria for the compilation of corpora. The third chapter discusses the concepts of Corporate Social Responsibility and sustainability reports, focusing mainly on the reporting principles and the linguistic patterns of this genre, and provides an overview of the main guidelines and certifications for the reporting of sustainability actions. Chapter four is dedicated to the description of the methodology used for this research, while the last chapter presents and discusses the results of the analysis, in an attempt to draw generalizations on the use of evaluative language in this emerging genre.

Chapter II: Diagnostic methods

Non-invasive vascular studies can provide crucial information on the presence, location, and severity of critical limb ischaemia (CLI), as well as the initial assessment or treatment planning. Ankle-brachial index with Doppler ultrasound, despite limitations in diabetic and end-stage renal failure patients, is the first-line evaluation of CLI. In this group of patients, toe-brachial index measurement may better establish the diagnosis. Other non-invasive measurements, such as segmental limb pressure, continuous-wave Doppler analysis and pulse volume recording, are of limited accuracy. Transcutaneous oxygen pressure (TcPO(2)) measurement may be of value when rest pain and ulcerations of the foot are present. Duplex ultrasound is the most important non-invasive tool in CLI patients combining haemodynamic evaluation with imaging modality. Computed tomography angiography (CTA) and magnetic resonance angiography (MRA) are the next imaging studies in the algorithm for CLI. Both CTA and MRA have been proven effective in aiding the decision-making of clinicians and accurate planning of intervention. The data acquired with CTA and MRA can be manipulated in a multiplanar and 3D fashion and can offer exquisite detail. CTA results are generally equivalent to MRA, and both compare favourably with contrast angiography. The individual use of different imaging modalities depends on local availability, experience, and costs. Contrast angiography represents the gold standard, provides detailed information about arterial anatomy, and is recommended when revascularisation is needed.

High activity of sorafenib in FLT3-ITD-positive acute myeloid leukemia synergizes with allo-immune effects to induce sustained responses

Preliminary evidence suggests that the multikinase inhibitor sorafenib has clinical activity in FLT3-ITD-positive (FLT3-ITD) acute myeloid leukemia (AML). However, the quality and sustainability of achievable remissions and clinical variables that influence the outcome of sorafenib monotherapy are largely undefined. To address these questions, we evaluated sorafenib monotherapy in 65 FLT3-ITD AML patients treated at 23 centers. All but two patients had relapsed or were chemotherapy-refractory after a median of three prior chemotherapy cycles. Twenty-nine patients (45%) had undergone prior allogeneic stem cell transplantation (allo-SCT). The documented best responses were: hematological remission in 24 patients (37%), bone marrow remission in 5 patients (8%), complete remission (with and without normalization of peripheral blood counts) in 15 patients (23%) and molecular remission with undetectable FLT3-ITD mRNA in 10 patients (15%), respectively. Seventeen of the patients without prior allo-SCT (47%) developed sorafenib resistance after a median treatment duration of 136 days (range, 56-270 days). In contrast, allo-SCT patients developed sorafenib resistance less frequently (38%) and significantly later (197 days, range 38-225 days; P=0.03). Sustained remissions were seen exclusively in the allo-SCT cohort. Thus, sorafenib monotherapy has significant activity in FLT3-ITD AML and may synergize with allogeneic immune effects to induce durable remissions.Leukemia advance online publication, 8 May 2012; doi:10.1038/leu.2012.105.

The effects of isoflurane minimum alveolar concentration on withdrawal reflex activity evoked by repeated transcutaneous electrical stimulation in ponies

The aim of this study was to quantify the effects of isoflurane at approximately the minimum alveolar concentration (peri-MAC) on the temporal summation (TS) of reflex activity in ponies. TS was evoked by repeated electrical stimulations applied at 5 Hz for 2 s on the digital nerve of the left forelimb of seven ponies. Surface electromyographic activity was recorded from the deltoid and common digital extensor muscles. TS thresholds and amplitude of response to stimulations of increasing intensities were assessed during anaesthesia at 0.85, 0.95 and 1.05 times the individual MAC, and after anaesthesia in standing animals. Under isoflurane anaesthesia, TS thresholds increased significantly in a concentration-dependent fashion and at each isoflurane MAC, the responses increased significantly for increasing stimulation intensities. A concentration-dependent depression of evoked reflexes with a reduction in the slopes of the stimulus-response function was observed for both muscles. The results demonstrated that with this model it is possible to describe and quantify the effects of anaesthetics on spinal sensory-motor processing in ponies.

Forced-use therapy for children with cerebral palsy in the community setting: a single-blinded randomized controlled pilot trial

The aim of this study was to elucidate the feasibility, efficacy, and sustainability of a home-based, two-week, forced-use therapy (FUT) program for children with hemiplegic cerebral palsy (CP).

Women's Dress as an Expression of Social Development in Bohemia in the Years 1850-1950"

The nature of Czech fashion was shaped both by the social environment - not particularly wealthy, modest, influenced by the Protestant tradition - and by efforts towards women's emancipation. This resulted in a rejection of unnecessarily quirky elements in fashion as early as the 1870s. As far as style was concerned, Czech fashion followed the Viennese, German and French, and from the 1890s also the English models, and also found inspiration in contemporary aesthetic principles. National political ambitions appeared in inspiration drawn from folk costume. Feminist struggles and sports paved the way for the acceptance of reformist and practical dress, in which Czech designers took an active part. These trends reached a peak around 1929, with the design of a complete "civilised" women's apparel, based on trouser suits. The peak periods in the development of Czech fashion were the 1920s and 1930s, when a number of top fashion houses were established and both fashion and society magazines with original fashion designs, photographs and articles were published. These produced a specifically Czech fashion, showing French inspiration but opting rather for an English style, which was artistically advanced, practical, luxurious and democratic. After 1948, fashion too fell under the centralised control of the communist regime.

Will International Pursuit of the Millenium Development Goals Alleviate Poverty in Mountains?

Since September 2000, when world leaders agreed on time-bound, measurable goals to reduce extreme poverty, hunger, illiteracy, and disease while fostering gender equality and ensuring environmental sustainability, the Millennium Development Goals (MDGs) have increasingly come to dominate the policy objectives of many states and development agencies. The concern has been raised that the tight timeframe and financial restrictions might force governments to invest in the more productive sectors, thus compromising the quality and sustainability of development efforts. In the long term, this may lead to even greater inequality, especially between geographical regions and social strata. Hence people living in marginal areas, for example in remote mountain regions, and minority peoples risk being disadvantaged by this internationally agreed agenda. Strategies to overcome hunger and poverty in their different dimensions in mountain areas need to focus on strengthening the economy of small-scale farmers, while also fostering the sustainable use of natural resources, taking into consideration their multifunctionality.

Twelve factors influencing sustainable recycling of municipal solid waste in developing countries

Sustainable management of solid waste is a global concern, as exemplified by the United Nations Millennium Development Goals (MDG) that 191 member states support. The seventh MDG indirectly advocates for municipal solid waste management (MSWM) by aiming to ensure environmental sustainability into countries’ policies and programs and reverse negative environmental impact. Proper MSWM will likely result in relieving poverty, reducing child mortality, improving maternal health, and preventing disease, which are MDG goals one, four, five, and six, respectively (UNMDG, 2005). Solid waste production is increasing worldwide as the global society strives to obtain a decent quality of life. Several means exist in which the amount of solid waste going to a landfill can be reduced, such as incineration with energy production, composting of organic wastes, and material recovery through recycling, which are all considered sustainable methods by which to manage MSW. In the developing world, composting is already a widely-accepted method to reduce waste fated for the landfill, and incineration for energy recovery can be a costly capital investment for most communities. Therefore, this research focuses on recycling as a solution to the municipal solid waste production problem while considering the three dimensions of sustainability environment, society, and economy. First, twenty-three developing country case studies were quantitatively and qualitatively examined for aspects of municipal solid waste management. The municipal solid waste (MSW) generation and recovery rates, as well as the composition were compiled and assessed. The average MSW generation rate was 0.77 kg/person/day, with recovery rates varying from 5 – 40%. The waste streams of nineteen of these case studies consisted of 0 – 70% recyclable material and 17 – 80% organic material. All twenty-three case studies were analyzed qualitatively by identifying any barriers or incentives to recycling, which justified the creation of twelve factors influencing sustainable municipal solid waste management (MSWM) in developing countries. The presence of regulations, enforcement of laws, and use of incentive schemes constitutes the first factor, Government Policy. Cost of MSWM operations, the budget allocated to MSWM by local to national governments, as well as the stability and reliability of funds comprise the Government Finances factor influencing recycling in the third world. Many case studies indicated that understanding features of a waste stream such as the generation and recovery rates and composition is the first measure in determining proper management solutions, which forms the third factor Waste Characterization. The presence and efficiency of waste collection and segregation by scavengers, municipalities, or private contractors was commonly addressed by the case studies, which justified Waste Collection and Segregation as the fourth factor. Having knowledge of MSWM and an understanding of the linkages between human behavior, waste handling, and health/sanitation/environment comprise the Household Education factor. Individuals’ income influencing waste handling behavior (e.g., reuse, recycling, and illegal dumping), presence of waste collection/disposal fees, and willingness to pay by residents were seen as one of the biggest incentives to recycling, which justified them being combined into the Household Economics factor. The MSWM Administration factor was formed following several references to the presence and effectiveness of private and/or public management of waste through collection, recovery, and disposal influencing recycling activity. Although the MSWM Personnel Education factor was only recognized by six of the twenty-two case studies, the lack of trained laborers and skilled professionals in MSWM positions was a barrier to sustainable MSWM in every case but one. The presence and effectiveness of a comprehensive, integrative, long-term MSWM strategy was highly encouraged by every case study that addressed the tenth factor, MSWM Plan. Although seemingly a subset of private MSWM administration, the existence and profitability of market systems relying on recycled-material throughput, involvement of small businesses, middlemen, and large industries/exporters is deserving of the factor Local Recycled-Material Market. Availability and effective use of technology and/or human workforce and the safety considerations of each were recurrent barriers and incentives to recycling to warrant the Technological and Human Resources factor. The Land Availability factor takes into consideration land attributes such as terrain, ownership, and development which can often times dictate MSWM. Understanding the relationships among the twelve factors influencing recycling in developing countries, made apparent the collaborative nature required of sustainable MSWM. Factors requiring the greatest collaborative inputs include waste collection and segregation, MSWM plan, and local recycled-material market. Aligning each factor to the societal, environmental, and economic dimensions of sustainability revealed the motives behind the institutions contributing to each factor. A correlation between stakeholder involvement and sustainability existed, as supported by the fact that the only three factors driven by all three dimensions of sustainability were the same three that required the greatest collaboration with other factors. With increasing urbanization, advocating for improved health for all through the MDG, and changing consumption patterns resulting in increasing and more complex waste streams, the utilization of the collaboration web offered by this research is ever needed in the developing world. Through its use, the institutions associated with each of the twelve factors can achieve a better understanding of the collaboration necessary and beneficial for more sustainable MSWM.