Competitive Solar Heating Systems for Residential Buildings (REBUS)

Research on solar combisystems for the Nordic and Baltic countries have been carriedout. The aim was to develop competitive solar combisystems which are attractive tobuyers and to educate experts in the solar heating field.The participants of the projects were the universities: Technical University of Denmark,Dalarna University, University of Oslo, Riga Technical University and Lund Institute ofTechnology, as well as the companies: Metro Therm A/S (Denmark), Velux A/S(Denmark), Solentek AB (Sweden), SolarNor (Norway) and SIA Grandeg (Latvia).The project included education, research, development and demonstration. Theactivities started in 2003 and were finished by the end of 2006. A number of Ph.D.studies in Denmark, Sweden and Latvia, and a post-doc. study in Norway were carriedout. Close cooperation between the researchers and the industry partners ensured thatthe results of the projects can be utilized. The industry partners will soon be able tobring the developed systems into the market.In Denmark and Norway the research and development focused on solarheating/natural gas systems, and in Sweden and Latvia the focus was on solarheating/pellet systems. Additionally, Lund Institute of Technology and University ofOslo studied solar collectors of various types being integrated into the building.

Passive crosslaminated timber buildings : Final report Cerbof-project no. 76

In this project, Stora Enso’s newly developed building system has been further developed to allow building to the Swedish passive house standard for the Swedish climate. The building system is based on a building framework of CLT (Cross laminated timber) boards. The concept has been tested on a small test building. The experience gained from this test building has also been used for planning a larger building (two storeys with the option of a third storey) with passive house standard with this building system. The main conclusions from the project are:  It is possible to build airtight buildings with this technique without using traditional vapour barriers. Initial measurements show that this can be done without reaching critical humidity levels in the walls and roof, at least where wood fibre insulation is used, as this has a greater capacity for storing and evening out the moisture than mineral wool. However, the test building has so far not been exposed to internal generation of moisture (added moisture from showers, food preparation etc.). This needs to be investigated and this will be done during the winter 2013-14.  A new fixing method for doors and windows has been tested without traditional fibre filling between them and the CLT panel. The door or window is pressed directly on to the CLT panel instead, with an expandable sealing strip between them. This has been proved to be successful.  The air tightness between the CLT panels is achieved with expandable sealing strips between the panels. The position of the sealing strips is important, both for the air tightness itself and to allow rational assembly.  Recurrent air tightness measurements show that the air tightness decreased somewhat during the first six months, but not to such an extent that the passive house criteria were not fulfilled. The reason for the decreased air tightness is not clear, but can be due to small movements in the CLT construction and also to the sealing strips being affected by changing outdoor temperatures.  Long term measurements (at least two years) have to be carried out before more reliable conclusions can be drawn regarding the long term effect of the construction on air tightness and humidity in the walls.  An economic analysis comparing using a concrete frame or the studied CLT frame for a three storey building shows that it is probably more expensive to build with CLT. For buildings higher than three floors, the CLT frame has economic advantages, mainly because of the shorter building time compared to using concrete for the frame. In this analysis, no considerations have been taken to differences in the influence on the environment or the global climate between the two construction methods.

Energy efficient and economic renovation of residential buildings with low-temperature heating and air heat recovery

With the building sector accounting for around 40% of the total energy consumption in the EU, energy efficiency in buildings is and continues to be an important issue. Great progress has been made in reducing the energy consumption in new buildings, but the large stock of existing buildings with poor energy performance is probably an even more crucial area of focus. This thesis deals with energy efficiency measures that can be suitable for renovation of existing houses, particularly low-temperature heating systems and ventilation systems with heat recovery. The energy performance, environmental impact and costs are evaluated for a range of system combinations, for small and large houses with various heating demands and for different climates in Europe. The results were derived through simulation with energy calculation tools. Low-temperature heating and air heat recovery were both found to be promising with regard to increasing energy efficiency in European houses. These solutions proved particularly effective in Northern Europe as low-temperature heating and air heat recovery have a greater impact in cold climates and on houses with high heating demands. The performance of heat pumps, both with outdoor air and exhaust air, was seen to improve with low-temperature heating. The choice between an exhaust air heat pump and a ventilation system with heat recovery is likely to depend on case specific conditions, but both choices are more cost-effective and have a lower environmental impact than systems without heat recovery. The advantage of the heat pump is that it can be used all year round, given that it produces DHW. Economic and environmental aspects of energy efficiency measures do not always harmonize. On the one hand, lower costs can sometimes mean larger environmental impact; on the other hand there can be divergence between different environmental aspects. This makes it difficult to define financial subsidies to promote energy efficiency measures.

Policy instruments to improve energy efficiency in buildings

The newly adopted energy efficiency directive (2012/27/EU) highlights the importance of energy efficiency in reaching the Union’s 2020 targets. The directive commits member states to defining national energy efficiency targets (art. 3), achieving yearly energy savings of 1.5% of the annual energy sales through the energy efficiency obligation scheme (art. 7), and providing a long-term strategy for the building sector that aims at a 3% refurbishment rate for public buildings (art. 4+5). Buildings currently account for 40% of energy use in most countries, putting them among the largest end-use sectors. This report takes a closer look at the best practices for implementing increasing energy efficiency in different regions and countries in Europe. The final aim is to identify some policy tools to be suggested to the region of Dalarna (Dalarna having been chosen as the pilot county in Sweden) as a means of implementing energy efficiency in the building sector. The final objective is to give analysts and decision-makers a better analytical foundation to explore future policy development in the area of buildings to be proposed and tested at the regional level in Dalarna and later at the national level in Sweden.

Using national input-output data for embodied energy analysis of individual residential buildings

Embodied energy (EE) analysis has become an important area of energy research, in attempting to trace the direct and indirect energy requirements of products and services throughout their supply chain. Typically, input-output (I-O) models have been used to calculate EE because they are considered to be comprehensive in their analysis. However, a major deficiency of using I-O models is that they have inherent errors and therefore cannot be reliably applied to individual cases. Thus, there is a need for the ability to disaggregate an I-O model into its most important 'energy paths', for the purpose of integrating case-specific data. This paper presents a new hybrid method for conducting EE analyses for individual buildings, which retains the completeness of the I-O model. This new method is demonstrated by application to an Australian residential building. Only 52% of the energy paths derived from the I-O model were substituted using case-specific data. This indicates that previous system boundaries for EE studies of individual residential buildings are less than optimal. It is envisaged that the proposed method will provide construction professionals with more accurate and reliable data for conducting life cycle energy analysis of buildings. Furthermore, by analysing the unmodified energy paths, further data collection can be prioritized effectively.

Net Energy Analysis of Double Glazing for Residential Buildings in Temperate Climates

Energy used in buildings is a major contributor to Australia’s energy consumption and associated environmental impacts. The advent of complex glazing systems such as double glazing, particularly in northern America and Europe, has partially closed a weak thermal link in the building envelope. In milder climates, however, building envelope features may not be as effective in life cycle energy terms, i.e. including the embodied energy of their manufacture. A net energy analysis compares the savings in operational energy to the additional requirements for embodied energy, in terms of the energy payback period and energy return on investment. The effectiveness of double glazing is determined for an Australian residential building. A wide range of building operation regimes was simulated. These results support the principle of installing double glazing in residential buildings in Melbourne, Australia, at least in terms of net primary energy savings.

An analysis of embodied energy of office buildings by height

Aims to compare the energy embodied in office buildings varying in height from a few storeys to over 50 storeys. The energy embodied in substructure, superstructure and finishes elements was investigated for five Melbourne office buildings of the following heights: 3, 7, 15, 42 and 52 storeys. The two high-rise buildings have approximately 60 percent more energy embodied per unit gross floor area (GFA) in their materials than the low-rise buildings. While building height was found to dictate the amount of energy embodied in the “structure group” elements (upper floors, columns, internal walls, external walls and staircases), other elements such as substructure, roof, windows and finishes seemed uninfluenced.

An analysis of factors influencing waste minimisation and use of recycled materials for the construction of residential buildings

Residential building construction activities, whether it is new build, repair or maintenance, consumes a large amount of natural resources. This has a negative impact on the environment in the form depleting natural resources, increasing waste production and pollution. Previous research has identified the benefits of preventing or reducing material waste, mainly in terms of the limited available space for waste disposal, and escalating costs associated with landfills, waste management and disposal and their impact on a  building company's profitability. There has however been little development internationally of innovative waste management strategies aimed at reducing the resource requirement of the construction process. The authors contend that embodied energy is a useful indicator of resource value. Using data provided by a regional high-volume residential builder in the State of Victoria, Australia, this paper identifies the various types of waste that are generated from the construction of a typical standard house. It was found that in this particular case, wasted amounts of materials were less than those found previously by others for cases in capital cities (5-10 per cent), suggesting that waste minimisation strategies are successfully being implemented. Cost and embodied energy savings from using materials with recycled content are potentially more beneficial in terms of embodied energy and resource depletion than waste minimisation strategies.

Estimating demolition costs for single residential buildings

With the increasing stock of aging structures, building
demolition is becoming achallenging research field from
the perspective of management. As the converse of
construction, management of demolition puts forward some
new management themes or adds some new contents
even though the same issues are faced in construction
management. This research aims to develop a quantitative
approach to estimate the costs of a demolition project. A
cost analysis method is presented to systematically break
down the cost components involved in the demolition of
a structure. Due to the lack of robust research in theory
and systematic summary in practice to date, the economic
performances of demolition will be studied through acase
study, and the majority of parameters are derived from
actual experiences in practice. The proposed demolition cost
estimation method is applied to the actual form of building
elimination (Scenario 1), and further comparison is carried
out with two other elimination methods, which are the newly
developed deconstruction (Scenario 2) and mechanical
demolition (Scenario 3). Deconstruction is found to be the
most profitable in this particular instance, and is closely
followed by the actual form.

Case study of demolition costs of residential buildings

Building demolition is one of the most common activities in the construction industry. Several demolition techniques are commonly used, including mechanical demolition, deconstruction and hybrid demolition. Although deconstruction has been advocated for its environmentally friendly approaches, the cost comparison of a demolition project under different techniques is rarely researched. In this paper, the cost of a demolition project is broken down to input and output costs, which are further broken down to more countable sections. Through an empirical study in Victoria, Australia, project costs of mechanical demolition, hybrid demolition and deconstruction are investigated. It is found that deconstruction has the greatest profitability among the three techniques. Hybrid demolition, which is the actual technique adopted by the contractor, has a slightly lower profit, and mechanical demolition is the most expensive. Although deconstruction has the best overall economical performance, the small extra gain comes with increased complexity and risk that deters demolition contractors from its attempt. It is found in the paper that an optimized demolition project strategy exists between hybrid demolition and deconstruction with the greatest profitability among various building demolition techniques.

UNESCO and cultural heritage practice in Australia in the 1950s: The international touring exhibition Australian Aboriginal Culture, 1948-55

This article investigates aspects of the production, dissemination and consumption of UNESCO’s first international touring exhibition, Australian Aboriginal Culture, in order to explore the relationship between UNESCO and Australia in the development of a key cultural heritage program. It argues that the exhibition indicates a national and international spirit of universalism that attempted to address crosscultural ignorance in a period of post-war optimism.

Staging modernity: the Semarang international colonial exhibition, 1914

The international exhibitions of the late nineteenth and early twentieth centuries are now generally seen as sites for the dissemination of an evolving discourse on modernity's primary theme: progress. These technological and cultural spectacles represented 'the self-congratulatory pride' of the bourgeoisie in their attainment of world power (Corbey 1994:60). The didactic function of international exhibitions lay embedded in their carefully arranged, itemised and annotated displays, as well as in the very architecture within which such displays were housed. It was a pedagogy palely echoed in every elementary classroom and school textbook of the newly created mass education systems of the day (Cote 2000a). The exhibitions were also modern in their embrace of the mass audience and their intentionally populist focus. An exhibition was intended to provide the visitor, already touched by a modern curiosity, with personal access to the wonders of modernity.

Environmental benchmarking of Hong Kong buildings

A method for assessing the environmental performance of Hong Kong’s buildings has been developed, known as the Hong Kong Building Environmental Assessment Method or HK-BEAM. The assessment is a type of expert-based survey, either of the design, in the case of proposed buildings, or an evaluation of building performance for newly built or existing buildings. The assessment essentially provides a benchmark of environmental performance against a series of qualitative and quantitative measures that earn “credits”. Buildings can be rated as “excellent”, “very good”, “good” or “fair”. The assessment covers global, local and indoor issues. The original assessment has been in use since 1996 and allowed appraisal of new and existing air-conditioned offices. A new version has been recently produced for residential buildings. The latest version has addressed some of the criticisms of the earlier versions and covers a wider range of issues, taking a life-cycle approach. Reviews the latest new residential version, making comparisons with the earlier new offices scheme.