EMD performance comparison: single vs double floating points

Empirical mode decomposition (EMD) is a data-driven method used to decompose data into oscillatory components. This paper examines to what extent the defined algorithm for EMD might be susceptible to data format. Two key issues with EMD are its stability and computational speed. This paper shows that for a given signal there is no significant difference between results obtained with single (binary32) and double (binary64) floating points precision. This implies that there is no benefit in increasing floating point precision when performing EMD on devices optimised for single floating point format, such as graphical processing units (GPUs).

Objective Empirical Mode Decomposition metric

Empirical Mode Decomposition (EMD) is a data driven technique for extraction of oscillatory components from data. Although it has been introduced over 15 years ago, its mathematical foundations are still missing which also implies lack of objective metrics for decomposed set evaluation. Most common technique for assessing results of EMD is their visual inspection, which is very subjective. This article provides objective measures for assessing EMD results based on the original definition of oscillatory components.

Regulation of early steps of GPVI signal transduction by phosphatases: a systems biology approach

We present a data-driven mathematical model of a key initiating step in platelet activation, a central process in the prevention of bleeding following Injury. In vascular disease, this process is activated inappropriately and causes thrombosis, heart attacks and stroke. The collagen receptor GPVI is the primary trigger for platelet activation at sites of injury. Understanding the complex molecular mechanisms initiated by this receptor is important for development of more effective antithrombotic medicines. In this work we developed a series of nonlinear ordinary differential equation models that are direct representations of biological hypotheses surrounding the initial steps in GPVI-stimulated signal transduction. At each stage model simulations were compared to our own quantitative, high-temporal experimental data that guides further experimental design, data collection and model refinement. Much is known about the linear forward reactions within platelet signalling pathways but knowledge of the roles of putative reverse reactions are poorly understood. An initial model, that includes a simple constitutively active phosphatase, was unable to explain experimental data. Model revisions, incorporating a complex pathway of interactions (and specifically the phosphatase TULA-2), provided a good description of the experimental data both based on observations of phosphorylation in samples from one donor and in those of a wider population. Our model was used to investigate the levels of proteins involved in regulating the pathway and the effect of low GPVI levels that have been associated with disease. Results indicate a clear separation in healthy and GPVI deficient states in respect of the signalling cascade dynamics associated with Syk tyrosine phosphorylation and activation. Our approach reveals the central importance of this negative feedback pathway that results in the temporal regulation of a specific class of protein tyrosine phosphatases in controlling the rate, and therefore extent, of GPVI-stimulated platelet activation.

Aspects of particle filtering in high-dimensional spaces

Nonlinear data assimilation is high on the agenda in all fields of the geosciences as with ever increasing model resolution and inclusion of more physical (biological etc.) processes, and more complex observation operators the data-assimilation problem becomes more and more nonlinear. The suitability of particle filters to solve the nonlinear data assimilation problem in high-dimensional geophysical problems will be discussed. Several existing and new schemes will be presented and it is shown that at least one of them, the Equivalent-Weights Particle Filter, does indeed beat the curse of dimensionality and provides a way forward to solve the problem of nonlinear data assimilation in high-dimensional systems.

Seasonality of westerly moisture transport in the East Asian summer monsoon and its implications for interpreting precipitation δ18O

East Asian summer monsoon (EASM) rainfall impacts the world's most populous regions. Accurate EASM rainfall prediction necessitates robust paleoclimate reconstructions from proxy data and quantitative linkage to modern climatic conditions. Many precisely dated oxygen isotope records from Chinese stalagmites have been interpreted as directly reflecting past EASM rainfall amount variability, but recent research suggests that such records instead integrate multiple hydroclimatic processes. Using a Lagrangian precipitation moisture source diagnostic, we demonstrate that EASM rainfall is primarily derived from the Indian Ocean. Conversely, Pacific Ocean moisture export peaks during winter, and the moisture uptake area does not differ significantly between summer and winter and is thus a minor contributor to monsoonal precipitation. Our results are substantiated by an accurate reproduction of summer and winter spatial rainfall distributions across China. We also correlate modern EASM rainfall oxygen isotope ratios with instrumental rainfall amount and our moisture source data. This analysis reveals that the strength of the source effect is geographically variable, and differences in atmospheric moisture transport may significantly impact the isotopic signature of EASM rainfall at the Hulu, Dongge, and Wanxiang Cave sites. These results improve our ability to isolate the rainfall amount signal in paleomonsoon reconstructions and indicate that precipitation across central and eastern China will directly respond to variability in Indian Ocean moisture supply.

The impact of the elderly on inflation rates in developed countries

What explains the cross-national variation in inflation rates in developed countries? Previous literature has emphasised the role of ideas and institutions, and to a lesser extent interest groups, while leaving the role of electoral politics comparatively unexplored. This paper seeks to redress this neglect by focusing on one case where electoral politics matters for inflation: the share of the population above 65 years old in a country. I argue that countries with a larger share of elderly have lower inflation because older people are both more inflation averse and politically powerful, forcing governments to pursue lower inflation. I test my argument in three steps. First, logistic regression analysis of survey data confirms older people are more inflation averse. Second, panel data regression analysis of party manifesto data reveals that European countries with more old people have more economically orthodox political parties. Third, time series cross-section regression analyses demonstrate that the share of the elderly is negatively correlated with inflation in both a sample of 21 advanced OECD economies and a larger sample of 175 countries. Ageing may therefore push governments to adopt a low inflation regime.

Doing well by talking good? A topic modelling-assisted discourse study of corporate social responsibility

Using the novel technique of topic modelling, this paper examines thematic patterns and their changes over time in a large corpus of corporate social responsibility (CSR) reports produced in the oil sector. Whereas previous research on corporate communications has been small-scale or interested in selected lexical aspects and thematic categories identified ex ante, our approach allows for thematic patterns to emerge from the data. The analysis reveals a number of major trends and topic shifts pointing to changing practices of CSR. Nowadays ‘people’, ‘communities’ and ‘rights’ seem to be given more prominence, whereas ‘environmental protection’ appears to be less relevant. Using more established corpus-based methods, we subsequently explore two top phrases - ‘human rights’ and ‘climate change’ that were identified as representative of the shifting thematic patterns. Our approach strikes a balance between the purely quantitative and qualitative methodologies and offers applied linguists new ways of exploring discourse in large collections of texts.

Water quality assessment of Toledo River and determination of metal concentrations by using SR-TXRF technique

The region of Toledo River, Parana, Brazil is characterized by intense anthropogenic activities. Hence, metal concentrations and physical-chemical parameters of Toledo River water were determined in order to complete an environmental evaluation catalog. Samples were collected monthly during one year period at seven different sites from the source down the river mouth, physical-chemical variables were analyzed, and major metallic ions were measured. Metal analysis was performed by using the synchrotron radiation total reflection X-ray fluorescence technique. A statistical analysis was applied to evaluate the reliability of experimental data. The analysis of obtained results have shown that a strong correlation between physical-chemical parameters existed among sites 1 and 7, suggesting that organic pollutants were mainly responsible for decreasing the Toledo River water quality.

Evaluation of a high temperature solar thermal seasonal borehole storage

A solar thermal system with seasonal borehole storage for heating of a residential area in Anneberg, Sweden, approximately 10 km north of Stockholm, has been in operation since late 2002. Originally, the project was part of the EU THERMIE project “Large-scale Solar Heating Systems for Housing Developments” (REB/0061/97) and was the first solar heating plant in Europe with borehole storage in rock not utilizing a heat pump. Earlier evaluations of the system show lower performance than the preliminary simulation study, with residents complaining of a high use of electricity for domestic hot water (DHW) preparation and auxiliary heating. One explanation mentioned in the earlier evaluations is that the borehole storage had not yet reached “steady state” temperatures at the time of evaluation. Many years have passed since then and this paper presents results from a new evaluation. The main aim of this work is to evaluate the current performance of the system based on several key figures, as well as on system function based on available measurement data. The analysis show that though the borehole storage now has reached a quasi-steady state and operates as intended, the auxiliary electricity consumption is much higher than the original design values largely due to high losses in the distribution network, higher heat loads as well as lower solar gains.

The core characteristics and nursing care activities in psychiatric intensive care units in Sweden

Internationally, research on psychiatric intensive care units (PICUs) commonly reportsresults from demographic studies such as criteria for admission, need for involuntary treatment, andthe occurrence of violent behaviour. A few international studies describe the caring aspect of thePICUs based specifically on caregivers’ experiences. The concept of PICU in Sweden is not clearlydefined. The aim of this study is to describe the core characteristics of a PICU in Sweden and todescribe the care activities provided for patients admitted to the PICUs. Critical incident techniquewas used as the research method. Eighteen caregivers at a PICU participated in the study bycompleting a semistructured questionnaire. In-depth interviews with three nurses and two assistantnurses also constitute the data. An analysis of the content identified four categories that characterizethe core of PICU: the dramatic admission, protests and refusal of treatment, escalating behaviours, andtemporarily coercive measure. Care activities for PICUs were also analysed and identified as controlling– establishing boundaries, protecting – warding off, supporting – giving intensive assistance, andstructuring the environment. Finally, the discussion put focus on determining the intensive aspect ofpsychiatric care which has not been done in a Swedish perspective before. PICUs were interpreted asa level of care as it is composed by limited structures and closeness in care.

Decision Tree Classification Model In Water Supply Network

With the service life of water supply network (WSN) growth, the growing phenomenon of aging pipe network has become exceedingly serious. As urban water supply network is hidden underground asset, it is difficult for monitoring staff to make a direct classification towards the faults of pipe network by means of the modern detecting technology. In this paper, based on the basic property data (e.g. diameter, material, pressure, distance to pump, distance to tank, load, etc.) of water supply network, decision tree algorithm (C4.5) has been carried out to classify the specific situation of water supply pipeline. Part of the historical data was used to establish a decision tree classification model, and the remaining historical data was used to validate this established model. Adopting statistical methods were used to access the decision tree model including basic statistical method, Receiver Operating Characteristic (ROC) and Recall-Precision Curves (RPC). These methods has been successfully used to assess the accuracy of this established classification model of water pipe network. The purpose of classification model was to classify the specific condition of water pipe network. It is important to maintain the pipeline according to the classification results including asset unserviceable (AU), near perfect condition (NPC) and serious deterioration (SD). Finally, this research focused on pipe classification which plays a significant role in maintaining water supply networks in the future.

Evaluation Of Reservoir Model Integration With Deterministic And Probabilistic Streamflow Forecasts

Due to the increase in water demand and hydropower energy, it is getting more important to operate hydraulic structures in an efficient manner while sustaining multiple demands. Especially, companies, governmental agencies, consultant offices require effective, practical integrated tools and decision support frameworks to operate reservoirs, cascades of run-of-river plants and related elements such as canals by merging hydrological and reservoir simulation/optimization models with various numerical weather predictions, radar and satellite data. The model performance is highly related with the streamflow forecast, related uncertainty and its consideration in the decision making. While deterministic weather predictions and its corresponding streamflow forecasts directly restrict the manager to single deterministic trajectories, probabilistic forecasts can be a key solution by including uncertainty in flow forecast scenarios for dam operation. The objective of this study is to compare deterministic and probabilistic streamflow forecasts on an earlier developed basin/reservoir model for short term reservoir management. The study is applied to the Yuvacık Reservoir and its upstream basin which is the main water supply of Kocaeli City located in the northwestern part of Turkey. The reservoir represents a typical example by its limited capacity, downstream channel restrictions and high snowmelt potential. Mesoscale Model 5 and Ensemble Prediction System data are used as a main input and the flow forecasts are done for 2012 year using HEC-HMS. Hydrometeorological rule-based reservoir simulation model is accomplished with HEC-ResSim and integrated with forecasts. Since EPS based hydrological model produce a large number of equal probable scenarios, it will indicate how uncertainty spreads in the future. Thus, it will provide risk ranges in terms of spillway discharges and reservoir level for operator when it is compared with deterministic approach. The framework is fully data driven, applicable, useful to the profession and the knowledge can be transferred to other similar reservoir systems.

Leakage Detection And Localization Method Based On A Hybrid Inverse/Direct Modelling Approach Suitable For Handling Multiple-Leak Scenarios

When an accurate hydraulic network model is available, direct modeling techniques are very straightforward and reliable for on-line leakage detection and localization applied to large class of water distribution networks. In general, this type of techniques based on analytical models can be seen as an application of the well-known fault detection and isolation theory for complex industrial systems. Nonetheless, the assumption of single leak scenarios is usually made considering a certain leak size pattern which may not hold in real applications. Upgrading a leak detection and localization method based on a direct modeling approach to handle multiple-leak scenarios can be, on one hand, quite straightforward but, on the other hand, highly computational demanding for large class of water distribution networks given the huge number of potential water loss hotspots. This paper presents a leakage detection and localization method suitable for multiple-leak scenarios and large class of water distribution networks. This method can be seen as an upgrade of the above mentioned method based on a direct modeling approach in which a global search method based on genetic algorithms has been integrated in order to estimate those network water loss hotspots and the size of the leaks. This is an inverse / direct modeling method which tries to take benefit from both approaches: on one hand, the exploration capability of genetic algorithms to estimate network water loss hotspots and the size of the leaks and on the other hand, the straightforwardness and reliability offered by the availability of an accurate hydraulic model to assess those close network areas around the estimated hotspots. The application of the resulting method in a DMA of the Barcelona water distribution network is provided and discussed. The obtained results show that leakage detection and localization under multiple-leak scenarios may be performed efficiently following an easy procedure.

Meteomap: Generation Of Meteorological Variables For Distributed Physically-Based Hydrological Modeling

Distributed energy and water balance models require time-series surfaces of the meteorological variables involved in hydrological processes. Most of the hydrological GIS-based models apply simple interpolation techniques to extrapolate the point scale values registered at weather stations at a watershed scale. In mountainous areas, where the monitoring network ineffectively covers the complex terrain heterogeneity, simple geostatistical methods for spatial interpolation are not always representative enough, and algorithms that explicitly or implicitly account for the features creating strong local gradients in the meteorological variables must be applied. Originally developed as a meteorological pre-processing tool for a complete hydrological model (WiMMed), MeteoMap has become an independent software. The individual interpolation algorithms used to approximate the spatial distribution of each meteorological variable were carefully selected taking into account both, the specific variable being mapped, and the common lack of input data from Mediterranean mountainous areas. They include corrections with height for both rainfall and temperature (Herrero et al., 2007), and topographic corrections for solar radiation (Aguilar et al., 2010). MeteoMap is a GIS-based freeware upon registration. Input data include weather station records and topographic data and the output consists of tables and maps of the meteorological variables at hourly, daily, predefined rainfall event duration or annual scales. It offers its own pre and post-processing tools, including video outlook, map printing and the possibility of exporting the maps to images or ASCII ArcGIS formats. This study presents the friendly user interface of the software and shows some case studies with applications to hydrological modeling.

Impacto dos investimentos em tecnologia da informação nas variáveis estratégicas e na eficiência dos bancos brasileiros

Esta tese objetiva identificar os impactos dos investimentos em Tecnologia de Informação (TI) nas variáveis estratégicas e na eficiência dos bancos brasileiros. Para a realização da investigação, utilizaram-se vários métodos e técnicas de pesquisa: (1) entrevista com executivos para identificar o papel da TI nos bancos; (2) survey com executivos dos bancos para selecionar as variáveis estratégicas organizacionais em que os efeitos da TI são mais significativos; (3) entrevista com executivos para adaptar as variáveis como input e output observáveis em contas de balanço; e (4) método de Pesquisa Operacional para elaborar um modelo de análise de eficiência e aplicar a técnica de Data Envelopment Analysis (DEA) para avaliar a efetividade de conversão dos investimentos em TI. A entrevista exploratória com os executivos dos bancos permitiu identificar como os bancos utilizam a TI e o seu papel como ferramenta estratégica. O processo de validação e purificação do instrumento (questionário) e dos constructos utilizados na survey fez uso de procedimentos qualitativos e quantitativos, como: validade de face e conteúdo, card sorting, análise de fidedignidade (coeficiente alfa de Cronbach), análise de correlação item- total corrigido (CITC), análise fatorial exploratória nos blocos e entre blocos, e análise fatorial confirmatória. O instrumento também foi validado externamente com executivos de bancos americanos. A partir do conjunto final de construtos, foram identificados variáveis de input e output observáveis em contas de balanço visando à elaboração e à definição do modelo de análise de eficiência. O modelo de eficiência estrutura-se no conceito de efetividade de conversão, que pressupõe que os investimentos em TI, combinados com outras variáveis de input (despesas com pessoal, outras despesas administrativas, e despesas de internacionalização) transformam-se em output (receitas líquidas de intermediação financeira, de prestação de serviços e de operações internacionais). Uma característica adicional do modelo é a representação em dois estágios: os investimentos em TI geram incremento nas receitas, mas esta relação é intermediada pela acumulação de ativos, financeiros e não financeiros. Os dados de balanço dos 41 bancos incluídos na amostra, de 1995 a 1999, foram fornecidos pelo Banco Central do Brasil. A aplicação do modelo na amostra selecionada indica claramente que apenas investir em TI não proporciona efetiva eficiência. Por outro lado, os bancos que mais investiram em TI no período analisado ganharam eficiência relativamente ao conjunto de bancos analisados. Dentre os resultados desta tese, podem ser destacados: o modelo de pesquisa, o conjunto de constructos e o instrumento (questionário), o processo de observação de input e output em contas de balanço e o modelo de análise de eficiência.