Dispersal pattern of the sand fly Lutzomyia neivai (Diptera: Psychodidae) in a cutaneous leishmaniasis endemic rural area in Southeastern Brazil

The dispersal pattern of the sand fly Lutzomyia neivai was studied through mark-release-recapture experiments in an American cutaneous leishmaniasis endemic rural area in Southeastern Brazil. Over 6500 specimens were marked with fluorescent powder and released in forest edge and peridomicile habitats from August to November 1999, February and April 2000. Recapture attempts were made using Shannon and CDC traps up to eight successive nights after releases. A total of 493 (7.58%) specimens were recaptured. The number of recaptured males and females of L. neivai in CDC traps was not affected by the distance between the trap and the release points. Approximately 90% of males and females recaptured in CDC traps were caught up to 70 m from the release points. The maximum female flight range recorded was 128 m. The average flight range per day was less than 60 m for males and females. Of the flies released in forest edge, approximately 16% of the recaptured females were caught in Shannon traps in the peridomicile habitat. The results indicate that the movements of L. neivai are spatially focal and the possibility of dispersion from forest to peridomicile habitat may be an important way of contracting leishmaniasis in dwellings.

Améliorations et optimisation globale de la méthode des analogues pour la prévision statistique des précipitations. Développement d'un outil de prévision et application opérationnelle au bassin du Rhône à l'amont du Léman.

Le bassin du Rhône à l'amont du Léman peut être sujet à de fortes précipitations en mesure de provoquer des crues significatives. L'objectif du projet MINERVE dans lequel s'inscrit le présent travail consiste à fournir des outils pour la prévision et la gestion des crues par des actions préventives sur les aménagements hydroélectriques à accumulation. Pour satisfaire ce dernier, il est nécessaire de prévoir au mieux les cumuls de précipitations pour les jours suivants. Ceci est actuellement effectué par le modèle numérique de prévision de MétéoSuisse ; mais, en raison des grandes incertitudes liées à la quantification des événements extrêmes, il a été décidé qu'une approche parallèle de nature statistique pourrait compléter l'information disponible. Ainsi, nous avons adapté la méthode des analogues, qui est une technique de prévision statistique des précipitations, au contexte alpin du bassin d'étude. Pour ce faire, plusieurs paramétrisations de la méthode ont été documentées et calibrées. Afin de prendre en main la méthode, nous avons effectué de multiples analyses paramétriques sur les variables synoptiques, mais également sur la constitution de groupements pluviométriques. Une partie conséquente de cette étude a été consacrée à la programmation d'un logiciel de prévision automatique par la méthode des analogues, ainsi qu'à un outil de visualisation des résultats sous forme de cartes et graphiques. Ce logiciel, nommé Atmoswing, permet d'implémenter un grand nombre de méthodes différentes de prévision par analogie. L'outil est opérationnel depuis mi-2011 et nous a permis de confirmer l'intérêt de la prévision par analogie. La méthode étant ici appliquée à un nouveau contexte, un grand nombre de variables synoptiques ont été évaluées. Nous avons alors confirmé l'intérêt des deux niveaux d'analogie sur la circulation atmosphérique et sur le flux d'humidité, tout en apportant des améliorations à celles-ci. Il en résulte des paramétrisations présentant des scores de performance supérieurs aux méthodes de référence considérées. Nous avons également évalué d'autres améliorations, comme l'introduction d'une fenêtre temporelle glissante afin de rechercher de meilleures analogies synoptiques à d'autres heures de la journée, ce qui s'est avéré intéressant, tout comme une prévision infrajournalière à pas de temps de 6 h. Finalement, nous avons introduit une technique d'optimisation globale, les algorithmes génétiques, capable de calibrer la méthode des analogues en considérant tous les paramètres des différents niveaux d'analogie de manière conjointe. Avec cette technique, nous pouvons nous approcher objectivement d'une paramétrisation optimale. Le choix des niveaux atmosphériques et des fenêtres temporelles et spatiales étant automatisé, cette technique peut engendrer un gain de temps, même si elle est relativement exigeante en calculs. Nous avons ainsi pu améliorer la méthode des analogues, et y ajouter de nouveaux degrés de liberté, notamment des fenêtres spatiales et des pondérations différenciées selon les niveaux atmosphériques retenus.

Aspects of peridomiciliary ecotopes in rural areas of Northeastern Brazil associated to triatomine (Hemiptera, Reduviidae) infestation, vectors of Chagas disease

Artificial ecotopes of 121 peridomiciliary environments in four rural localities in the state of Ceará, Brazil, were studied and the type of material of the ecotopes was identified as triatomine infestation. Two thousand two hundred and four Triatoma brasiliensis Neiva, 340 Triatoma pseudomaculata Corrêa and Espínola, 121 Rhodnius nasutus Stall, and 5 Panstrongylus lutzi (Neiva and Pinto) were captured. Out of the 323 ecotopes found (X =2.0 ± 1.8 per dwelling) such as pigpens, henhouses, corrals, perches, dovecotes, piles of roofing tiles, bricks, wood, and straw 30.3% were infested by triatomines in all different developmental stages, including eggs. A substantial number of triatomines were found in perches, however the largest infestation took place in roofing materials used in the construction of goat/sheep corrals, henhouses, and pigpens, where 98% of them were captured: 1372 triatomines were located in the roofing tile covers, 285 in the straw, 187 in the perches, 77 in the coverings of roofing tiles and straw, and 13 in the straw and wood. Among all the different pile of materials, roofing tiles were the most infested (50%) followed by bricks (38.9%) and woods (36.1%). T. brasiliensis colonized mainly brick piles (chi2=16.539; p < 0.05) and roofing tiles (chi2=5,090.58; p < 0.05); T. pseudomaculata preferred wood perches (chi2= 472.39; p < 0.05) and woodpiles (chi2=126.0 p < 0.05), and R. nasutus was principally found in roofing straw (chi2=384.43; p < 0.05). These findings suggest that triatomines tend to colonize peridomiciliary ecotopes similar to their original habitats.

Related factors to human toxocariasis in a rural community of Argentina

The objective of this study was to evaluate the relationship between toxocariasis frequency and demographic, environmental, sanitary variables, eosinophylia, and other intestinal parasites in a rural population of Argentina. Serological examination of 100 individuals was carried out by using ELISA technique for the detection of anti-toxocara antibodies. Eosinophiles in peripheral blood, presence of intestinal parasites, and demographic, environmental, and socio-cultural data were evaluated. Eighty-one feces samples of dogs belonging to the studied people were analyzed to detect eggs of Toxocara canis. Thirty of them were from 30 dogs and 51 were pools from dog feces. Samples of dirt from around the homes (n: 47) and from public park (n: 4) were taken. To determine the associations, the c² and Fisher tests were used. The seroprevalence was 23%. Eosinophilia in peripheral blood was detected in 86.95% seropositive individuals and in 37.66% seronegative individuals (p < 0.001, OR = 11.03). Of the 23 people with positive serology, 69.56% had at least one intestinal parasite. All individuals with positive serology had dogs in their homes. Among the dog owners there was a significant association between the presence of anti-toxocara antibodies and home flooding. Eggs of T. canis were detected in the feces of 5/81 dogs and three of these dogs belonged to individuals with positive serology. Eggs of Toxocara spp. were found in 41.17% of the dirt samples, eight of which came from the area surrounding the homes of individuals with positive serology (p = 0.032; OR = 4.36). Taking into account all the variables influencing the frequency of toxocariasis in this population, the implementation of Public Health programs specifically focused on anti-parasitic treatment of dogs is recommended.

The impact of two education methods on knowledge of schistosomiasis transmission and prevention among schoolchildren in a rural community in northern Minas Gerais, Brazil

The objective of this study was to analyse the effect of using two health education approaches on knowledge of transmission and prevention of schistosomiasis of school children living in a rural endemic area in the state of Minas Gerais, Brazil. The 87 children participating in the study were divided into three groups based on gender, age and presence or absence of Schistosoma mansoni infection. In the first group the social representation model and illness experience was used. In the second group, we used the cognitive model based on the transmission of information. The third group, the control group, did not receive any information related to schistosomiasis. Ten meetings were held with all three groups that received a pre-test prior to the beginning of the educational intervention and a post-test after the completion of the program. The results showed that knowledge levels in Group 1 increased significantly during the program in regard to transmission (p = 0.038) and prevention (p = 0.001) of schistosomiasis. Groups 2 and 3 did not show significant increase in knowledge between the two tests. These results indicate that health education models need to consider social representation and illness experience besides scientific knowledge in order to increase knowledge of schistosomiasis transmission and prevention.

Infestation of rural houses by Triatoma infestans in the region of Los Llanos (La Rioja, Argentina)

Vectorial transmission of Chagas disease has been strongly reduced in most parts of the Southern Cone countries of South America, except in the Gran Chaco region of Argentina, Bolivia, and Paraguay. Given periodical interruptions of the vector control programmes in the endemic region of the Gran Chaco of Argentina, the vectorial transmission of the disease has been increasing during the last years. From the beginning of 2004, the provincial Ministry of Health of La Rioja, Argentina, started a vector control programme to cover the rural houses of the Los Llanos area in the southwestern area of the Gran Chaco region. This article reports the result of a standardized entomological survey and insecticide application against Chagas disease vectors in the intra and peridomestic structures of the rural houses of Los Llanos. A total of 4062 houses were inspected, of which 46.8% were found to be infested by Triatoma infestans. Infestation by vector species other than T. infestans was less than 0.5%(T. eratyrusiformis and T. platensis). Intradomestic infestation was found in 27.2%, whereas peridomestic infestation was found in 39.3% of the houses. The lowest figure of intradomestic infestation was 6.6% (Department F Varela), and the highest value of intradomestic infestation was 45.1% (Department Independencia). In spite of the demonstrated success of vector control elsewhere, this study shows that the vector populations are susceptible to pyrethroid insecticides in the southern area of the Gran Chaco of Argentina, that there still are regions where rural houses show heavy infestation by T. infestans associated with big peridomestic structures and that the vectorial transmission of the Chagas disease will continue, unless a sustained and well organized vector control effort is installed in the region.

Ecologie industrielle de l'aluminium, flux de matières et d'énergie : réalités et enjeux du recyclage

Dans les dernières années du 20ème siècle, l'aluminium a fait l'objet de beaucoup de communications outrancières et divergentes cautionnées par des scientifiques et des organismes faisant autorité. En 1986, la société PECHINEY le décrète perpétuel tel le mouvement « L'aluminium est éternel. Il est recyclable indéfiniment sans que ses propriétés soient altérées », ce qui nous avait alors irrité. Peu de temps après, en 1990, une communication tout aussi outrancière et irritante d'une grande organisation environnementale, le World Wild Fund, décrète que « le recyclage de l'aluminium est la pire menace pour l'environnement. Il doit être abandonné ». C'est ensuite à partir de la fin des années 1990, l'explosion des publications relatives au développement durable, le bien mal nommé. Au développement, synonyme de croissance obligatoire, nous préférons société ou organisation humaine et à durable, mauvaise traduction de l'anglais « sustainable », nous préférons supportable : idéalement, nous aurions souhaité parler de société durable, mais, pour être compris de tous, nous nous sommes limités à parler dorénavant de développement supportable. Pour l'essentiel, ces publications reconnaissent les très graves défauts de la métallurgie extractive de l'aluminium à partir du minerai et aussi les mérites extraordinaires du recyclage de l'aluminium puisqu'il représente moins de 10% de la consommation d'énergie de la métallurgie extractive à partir du minerai (on verra que c'est aussi moins de 10% de la pollution et du capital). C'est précisément sur le recyclage que se fondent les campagnes de promotion de l'emballage boisson, en Suisse en particulier. Cependant, les données concernant le recyclage de l'aluminium publiées par l'industrie de l'aluminium reflètent seulement en partie ces mérites. Dans les années 1970, les taux de croissance de la production recyclée sont devenus plus élevés que ceux de la production électrolytique. Par contre, les taux de recyclage, établis à indicateur identique, sont unanimement tous médiocres comparativement à d'autres matériaux tels le cuivre et le fer. Composante de l'industrie de l'aluminium, le recyclage bénéficie d'une image favorable auprès du grand public, démontrant le succès des campagnes de communication. A l'inverse, à l'intérieur de l'industrie de l'aluminium, c'est une image dévalorisée. Les opinions émises par tous les acteurs, commerçants, techniciens, dirigeants, encore recueillies pendant ce travail, sont les suivantes : métier de chiffonnier, métier misérable, métier peu technique mais très difficile (un recycleur 15 d'aluminium n'a-t-il pas dit que son métier était un métier d'homme alors que celui du recycleur de cuivre était un jeu d'enfant). A notre avis ces opinions appartiennent à un passé révolu qu'elles retraduisent cependant fidèlement car le recyclage est aujourd'hui reconnu comme une contribution majeure au développement supportable de l'aluminium. C'est bien pour cette raison que, en 2000, l'industrie de l'aluminium mondiale a décidé d'abandonner le qualificatif « secondaire » jusque là utilisé pour désigner le métal recyclé. C'est en raison de toutes ces données discordantes et parfois contradictoires qu'a débuté ce travail encouragé par de nombreuses personnalités. Notre engagement a été incontestablement facilité par notre connaissance des savoirs indispensables (métallurgie, économie, statistiques) et surtout notre expérience acquise au cours d'une vie professionnelle menée à l'échelle mondiale dans (recherche et développement, production), pour (recherche, développement, marketing, stratégie) et autour (marketing, stratégie de produits connexes, les ferro-alliages, et concurrents, le fer) de l'industrie de l'aluminium. Notre objectif est de faire la vérité sur le recyclage de l'aluminium, un matériau qui a très largement contribué à faire le 20ème siècle, grâce à une revue critique embrassant tous les aspects de cette activité méconnue ; ainsi il n'y a pas d'histoire du recyclage de l'aluminium alors qu'il est plus que centenaire. Plus qu'une simple compilation, cette revue critique a été conduite comme une enquête scientifique, technique, économique, historique, socio-écologique faisant ressortir les faits principaux ayant marqué l'évolution du recyclage de l'aluminium. Elle conclut sur l'état réel du recyclage, qui se révèle globalement satisfaisant avec ses forces et ses faiblesses, et au-delà du recyclage sur l'adéquation de l'aluminium au développement supportable, adéquation largement insuffisante. C'est pourquoi, elle suggère les thèmes d'études intéressant tous ceux scientifiques, techniciens, historiens, économistes, juristes concernés par une industrie très représentative de notre monde en devenir, un monde où la place de l'aluminium dépendra de son aptitude à satisfaire les critères du développement supportable. ABSTRACT Owing to recycling, the aluminium industry's global energetic and environmental prints are much lower than its ore extractive metallurgy's ones. Likewise, recycling will allow the complete use of the expected avalanche of old scraps, consequently to the dramatic explosion of aluminium consumption since the 50's. The recycling state is characterized by: i) raw materials split in two groups :one, the new scrap, internal and prompt, proportional to semi-finished and finished products quantities, exhibits a fairly good and regular quality. The other, the old scrap, proportional to the finished products arrivïng at their end-of--life, about 22 years later on an average, exhibits a variable quality depending on the collect mode. ii) a poor recycling rate, near by that of steel. The aluminium industry generates too much new internal scrap and doesn't collect all the availa~e old scrap. About 50% of it is not recycled (when steel is recycling about 70% of the old scrap flow). iii) recycling techniques, all based on melting, are well handled in spite of aluminium atiiníty to oxygen and the practical impossibility to purify aluminium from any impurity. Sorting and first collect are critical issues before melting. iv) products and markets of recycled aluminium :New scraps have still been recycled in the production lines from where there are coming (closed loop). Old scraps, mainly those mixed, have been first recycled in different production lines (open loop) :steel deoxidation products followed during the 30's, with the development of the foundry alloys, by foundry pieces of which the main market is the automotive industry. During the 80's, the commercial development of the beverage can in North America has permitted the first old scrap recycling closed loop which is developing. v) an economy with low and erratic margins because the electrolytic aluminium quotation fixes scrap purchasing price and recycled aluminium selling price. vi) an industrial organisation historically based on the scrap group and the loop mode. New scrap is recycled either by the transformation industry itself or by the recycling industry, the remelter, old scrap by the refiner, the other component of the recycling industry. The big companies, the "majors" are often involved in the closed loop recycling and very seldom in the open loop one. To-day, aluminium industry's global energetic and environmental prints are too unbeara~ e and the sustainaЫe development criteria are not fully met. Critical issues for the aluminium industry are to better produce, to better consume and to better recycle in order to become a real sustainaЫe development industry. Specific issues to recycling are a very efficient recycling industry, a "sustainaЫe development" economy, a complete old scrap collect favouring the closed loop. Also, indirectly connected to the recycling, are a very efficient transformation industry generating much less new scrap and a finished products industry delivering only products fulfilling sustainaЫe development criteria.

Sexually transmitted infections, bacterial vaginosis, and candidiasis in women of reproductive age in rural Northeast Brazil: a population-based study

Population-based data on sexually transmitted infections (STI), bacterial vaginosis (BV), and candidiasis reflect the epidemiological situation more accurately than studies performed in specific populations, but such data are scarce. To determine the prevalence of STI, BV, and candidiasis among women of reproductive age from a resource-poor community in Northeast Brazil, a population-based cross sectional study was undertaken. All women from seven hamlets and the centre of Pacoti municipality in the state of Ceará, aged 12 to 49 years, were invited to participate. The women were asked about socio-demographic characteristics and genital symptoms, and thereafter examined gynaecologically. Laboratory testing included polymerase chain reaction (PCR) for human papillomavirus (HPV), ligase chain reaction (LCR) for Chlamydia trachomatis and Neisseria gonorrhoeae, ELISA for human immunodeficiency virus (HIV), venereal disease research laboratory (VDRL) and fluorescent treponema antibody absorption test (FTA-ABS) for syphilis, and analysis of wet mounts, gram stains and Pap smears for trichomoniasis, candidiasis, and BV. Only women who had initiated sexual life were included in the analysis (n = 592). The prevalences of STI were: HPV 11.7% (95% confidence interval: 9.3-14.7), chlamydia 4.5% (3.0-6.6), trichomoniasis 4.1% (2.7-6.1), gonorrhoea 1.2% (0.5-2.6), syphilis 0.2% (0.0-1.1), and HIV 0%. The prevalence of BV and candidiasis was 20% (16.9-23.6) and 12.5% (10.0-15.5), respectively. The most common gynaecological complaint was lower abdominal pain. STI are common in women in rural Brazil and represent an important health threat in view of the HIV pandemic.

Risk-based modelling of diffuse land use impacts from rural landscapes upon salmonid fry abundance

Research has demonstrated that landscape or watershed scale processes can influence instream aquatic ecosystems, in terms of the impacts of delivery of fine sediment, solutes and organic matter. Testing such impacts upon populations of organisms (i.e. at the catchment scale) has not proven straightforward and differences have emerged in the conclusions reached. This is: (1) partly because different studies have focused upon different scales of enquiry; but also (2) because the emphasis upon upstream land cover has rarely addressed the extent to which such land covers are hydrologically connected, and hence able to deliver diffuse pollution, to the drainage network However, there is a third issue. In order to develop suitable hydrological models, we need to conceptualise the process cascade. To do this, we need to know what matters to the organism being impacted by the hydrological system, such that we can identify which processes need to be modelled. Acquiring such knowledge is not easy, especially for organisms like fish that might occupy very different locations in the river over relatively short periods of time. However, and inevitably, hydrological modellers have started by building up piecemeal the aspects of the problem that we think matter to fish. Herein, we report two developments: (a) for the case of sediment associated diffuse pollution from agriculture, a risk-based modelling framework, SCIMAP, has been developed, which is distinct because it has an explicit focus upon hydrological connectivity; and (b) we use spatially distributed ecological data to infer the processes and the associated process parameters that matter to salmonid fry. We apply the model to spatially distributed salmon and fry data from the River Eden, Cumbria, England. The analysis shows, quite surprisingly, that arable land covers are relatively unimportant as drivers of fry abundance. What matters most is intensive pasture, a land cover that could be associated with a number of stressors on salmonid fry (e.g. pesticides, fine sediment) and which allows us to identify a series of risky field locations, where this land cover is readily connected to the river system by overland flow. (C) 2010 Elsevier B.V. All rights reserved.