Longitudinal distribution and lateral pattern of megalopal settlement and juvenile recruitment of Carcinus maenas (L.) (Brachyura, Portunidae) in the Mira River Estuary, Portugal

Settlement is a critical process in the life history of crabs, and thus affecting the abundance, distribution and structure of estuarine communities. The spatial pattern of settlement of megalopae of the shore crab Carcinus maenas along a longitudinal estuarine gradient (Mira River Estuary, Portugal) was examined, as well as its effects on the juvenile population. To measure megalopal settlement, four replicate collectors were deployed in six equally spaced stations along the estuarine axis. Juveniles were collected on the same locations with a quadrat randomly deployed on the substrate. To assess fine-scale megalopal settlement within a curved region of the estuary, replicate collectors were deployed on both margins along Moinho da Asneira curve. Megalopae settled differently along the six longitudinal points, with a tendency to attenuate their settlement upstream. Within the curved region, megalopae preferentially settled on the left margin collectors, probably due to the weaker velocity speeds felt on this margin. Concerning the overall juvenile density, there were significant differences among the stations distributed along the estuary, but they did no reflect a longitudinal dispersion attenuation pattern. Size-frequency distribution of the juvenile population showed that the average size is higher on the left margin. Recruits (carapace length between 1.0 mm and 3.4 mm) were more abundant on the upstream stations. Density of early juveniles (3.4 mm-6.5 mm) and juveniles (6.5 mm-10 mm) was more stable throughout the estuary axis than that of recruits. This distribution pattern may result from tidal excursion processes or mechanisms to avoid biotic interactions, such as predation and competition. (c) 2006 Elsevier Ltd. All rights reserved.

Morfologia de frutos e sementes de espécies arbóreas do gênero Solanum L.

O objetivo do trabalho foi caracterizar a morfologia do fruto e da semente de três espécies florestais nativas do Brasil, Solanum granuloso-leprosum Dunal, S. lycocarpum A.St.-Hil. e S. pseudoquina A.St.-Hil., recomendadas para plantações destinadas à recuperação de áreas degradadas. Os frutos são indeiscentes, carnosos, do tipo baga, globosos, polispérmicos e constituídos por dois ou mais lóculos. As sementes são estenospérmicas, campilótropas, elipsóides, comprimidas, apresentando seção longitudinal largo-ovalada ou achatado-ovalada e seção transversal elíptica. Hilo mediano-marginal localizado em uma depressão e micrópila arredondada. Sementes albuminosas, com endosperma abundante, periférico, carnoso-firme, semitransparente e de coloração esbranquiçada. Embrião axial, linear, contínuo e curvado. em Solanum lycocarpum e S. pseudoquina o embrião é circinado e em S. granuloso-leprosum é espiralado.

Morphology of beak and tongue of partrigde Rhynchotus rufescens

Vinte perdizes Rhynchotus rufescens foram utilizadas para estudar a morfologia do bico e da língua. Os comprimentos do bico e da língua foram avaliados, e secções histológicas foram coradas com Hematoxilina-Eosina (HE), ácido periódico de Schiff (PAS) e tricromo de Masson, posteriormente analisadas e descritas. O bico da perdiz em ambos os sexos são curvos, duros e com uma extremidade pontiaguda tendo em média de 4,90cm de comprimento para as fêmeas e 4,80 para os machos. A língua é caracterizada por um formato triangular e possui em média 1cm de comprimento para ambos os sexos, sendo sua extremidade pontiaguda. A organização histológica da língua apresenta epitélio estratificado queratinizado com papilas filiformes em toda a superfície, glândulas mucosas com ductos que se projetam na superfície epitelial e cartilagem hialina em todo o comprimento, localizada sobre a musculatura esquelética, a qual é orientada em várias direções.

Descrição anátomo-topográfica do coração da paca (Agouti paca)

Background: The domestic animals heart is a conical hollow viscera, surrounded by pericardium, laterally compressed, accompanying the thorax shape. Atriums constituted the heart basis and their auricles partially bound the initial portion of the aorta and pulmonary trunk. In mammals, heart is kept suspended in the thoracic cavity and the pericardic sac is fixed dorsally by great veins and arteries roots, and ventrally fixed to the sternum, although its fixation to the diaphragm varies among species. This paper aimed to describe morphological aspects of the heart of the paca, the second biggest Brazilian rodent.Materials, Methods & Results: There were used 12 hearts of adult pacas for this study, obtained from the UNESP, Jaboticabal, SP, which died due fights or anesthesia during bandages or radiograph exams. The thoracic aorta was filled with colored latex and the animal was set in a 10% formaldehyde solution for at least 72 hours. The thoracic cavity was dissected and hearts individualized and measured with a paquimeter, lateromedially, craniocaudally and dorsoventrally. The paca heart is placed between the first and fifth intercostal space (ICS), in a craniocaudal oblique position; its basis is craniodorsally positioned, on the middle third between the first and second ICS and its apex is located near the sternodiaphragmatic joint, on the fifth ICS, tilted to the left antimere. The heart is surrounded by pericardium, which from ventrocaudally is originated the sternopericardic ligament, that continues as phrenopericardic ligament. At the heart basis, the rising of the pulmonary trunk was observed and the conus arteriosus formed a typical projection. The aorta also rised from the heart basis and its arch, which was caudally curved, crossed dorsally the pulmonary trunk; the right cranial and caudal cava veins drained to the right atrium. There is a left cranial cava vein, which surrounded the left atrium and joined the right caudal cava vein on the right atrium. The azygos vein joins the right cranial cava vein and four pulmonary veins drained to the left atrium. At palpation, a hard structure on the rising of the aorta was observed, similarly to a cartilaginous tissue, which would be part of the cardiac skeleton. The left and right coronary arteries were observed in all hearts.Discussion: The paca heart is anatomica and topographically similar to those of domestic mammals, differing from them for being placed one intercostal space more cranial and due to the presence of two cranial cava veins, the left and the right ones, besides the presence of the caudal cava vein. This vascular description is similar to that of small rodents, as rats and mice. In paca heart, the sinus venous, the terminal crest, the oval fossa, the atrioventricular valvae, the papillary muscles and tendinous cords, besides smooth atriums and auricles covered by pectinate muscles, were observed. The sternopericardic ligament, which is dorsally elongated as phrenopericardic ligament, is similar to the one present in humans, pigs, castors, and different from the one observed in carnivorous, that presents the phrenopericardic ligament and from the one of horses and ruminants, which present the sternopericardic ligament.

Síntese e caracterização do carbeto de molibdênio nanoestruturado para fins catalíticos na reação de oxidação parcial do metano

The nanostructures materials are characterized to have particle size smaller than 100 nm and could reach 1 nm. Due to the extremely reduced dimensions of the grains, the properties of these materials are significantly modified relatively when compared with the conventional materials. In the present work was accomplished a study and characterization of the molybdenum carbide, seeking obtain it with particles size in the nanometers order and evaluate its potential as catalyst in the reaction of partial methane oxidation. The method used for obtaining the molybdenum carbide was starting from the precursor ammonium heptamolybdate of that was developed in split into two oven, in reactor of fixed bed, with at a heating rate of 5ºC/min, in a flow of methane and hydrogen whose flow was of 15L/h with 5% of methane for all of the samples. The studied temperatures were 350, 500, 600, 650, 660, 675 and 700ºC and were conducted for 0, 60, 120 and 180 minutes, and the percent amount and the crystallite size of the intermediate phases were determined by the Rietveld refinement method. The carbide obtained at 660ºC for 3 hours of reaction showed the best results, 24 nm. Certain the best synthesis condition, a passivating study was accomplished, in these conditions, to verify the stability of the carbide when exposed to the air. The molybdenum carbide was characterized by SEM, TEM, elemental analysis, ICP-AES, TG in atmosphere of hydrogen and TPR. Through the elemental analysis and ICP-AES the presence carbon load was verified. TG in atmosphere of hydrogen proved that is necessary the passivating of the molybdenum carbide, because occur oxidation in room temperature. The catalytic test was accomplished in the plant of Fischer-Tropsch of CTGAS, that is composed of a reactor of fixed bed. Already the catalytic test showed that the carbide presents activity for partial oxidation, but the operational conditions should be adjusted to improve the conversion

Pyrolysis and auto-gasification of black liquor in presence of ZnO: An integrated process for Zn/ZnO nanostructure production and bioenergy generation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Molecular and morphological characterization of bis benzimidazo perylene films and surface-enhanced phenomena

Thin solid films of bis benzimidazo perylene (AzoPTCD) were fabricated using physical vapor deposition (PVD) technique. Thermal stability and integrity of the AzoPTCD PVD films during the fabrication (similar to 400 degrees C at 10(-6) Torr) were monitored by Raman scattering. Complementary thermogravimetric results showed that thermal degradation of AzoPTCD occurs at 675 degrees C. The growth of the PVD films was established through UV-vis absorption spectroscopy, and the surface morphology was surveyed by atomic force microscopy (AFM) as a function of the mass thickness. The AzoPTCD molecular organization in these PVD films was determined using the selection rules of infrared absorption spectroscopy (transmission and reflection-absorption modes). Despite the molecular packing, X-ray diffraction revealed that the PVD films are amorphous. Theoretical calculations (density functional theory, B3LYP) were used to assign the vibrational modes in the infrared and Raman spectra. Metallic nanostructures, able to sustain localized surface plasmons (LSP) were used to achieve surface-enhanced resonance Raman scattering (SERRS) and surface-enhanced fluorescence (SEF).

Portable smart films for ultrasensitive detection and chemical analysis using SERS and SERRS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Implementação da técnica de difração de elétrons de baixa energia

The purpose of this study is to describe the implementation of the Low Energy Electron Diffaction (LEED) technique in the Laboratory of Magnetic Nanostructures and Semiconductors of the Department of Theoretical and Experimental Physics of the Universidade Federal do Rio Grande do Norte (UFRN), Natal, Brazil. During this work experimental apparatus were implemented for a complete LEED set-up. A new vacuum system was also set up. This was composed of a mechanical pump, turbomolecular pump and ionic pump for ultra-high vacuum and their respective pressure measurement sensors (Pirani gauge for low vacuum measures and the wide range gauge -WRG); ion cannon maintenance, which is basically mini-sputtering, whose function is sample cleaning; and set-up, maintenance and handling of the quadrupole mass spectrometer, whose main purpose is to investigate gas contamination inside the ultra-high vacuum chamber. It should be pointed out that the main contribution of this Master's thesis was the set-up of the sample heating system; that is, a new sample holder. In addition to the function of sample holder and heater, it was necessary to implement the function of sustaining the ultra-high vacuum environment. This set of actions is essential for the complete functioning of the LEED technique

Multicamadas Ferromagnéticas Nanométricas Periódicas e Quasiperiódicas

We present a study of nanostructured magnetic multilayer systems in order to syn- thesize and analyze the properties of periodic and quasiperiodic structures. This work evolved from the deployment and improvement of the sputtering technique in our labora- tories, through development of a methodology to synthesize single crystal ultrathin Fe (100) films, to the final goal of growing periodic and quasiperiodic Fe/Cr multilayers and investi- gating bilinear and biquadratic exchange coupling between ferromagnetic layer dependence for each generation. Initially we systematically studied the related effects between deposition parameters and the magnetic properties of ultrathin Fe films, grown by DC magnetron sput- tering on MgO(100) substrates. We modified deposition temperature and film thickness, in order to improve production and reproduction of nanostructured monocrystalline Fe films. For this set of samples we measured MOKE, FMR, AFM and XPS, with the aim of investi- gating their magnocrystalline and structural properties. From the magnetic viewpoint, the MOKE and FMR results showed an increase in magnetocrystalline anisotropy due to in- creased temperature. AFM measurements provided information about thickness and surface roughness, whereas XPS results were used to analyze film purity. The best set of parame- ters was used in the next stage: investigation of the structural effect on magnetic multilayer properties. In this stage multilayers composed of interspersed Fe and Cr films are deposited, following the Fibonacci periodic and quasiperiodic growth sequence on MgO (100) substrates. The behavior of MOKE and FMR curves exhibit bilinear and biquadratic exchange coupling between the ferromagnetic layers. By computationally adjusting magnetization curves, it was possible to determine the nature and intensity of the interaction between adjacent Fe layers. After finding the global minimum of magnetic energy, we used the equilibrium an- gles to obtain magnetization and magnetoresistance curves. The results observed over the course of this study demonstrate the efficiency and versatility of the sputtering technique in the synthesis of ultrathin films and high-quality multilayers. This allows the deposition of magnetic nanostructures with well-defined magnetization and magnetoresistance parameters and possible technological applications

Columnar microstructure of nanocrystalline Ga1-xMnxN films deposited by reactive sputtering

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Hyperfine interaction in Zn-Al layered double hydroxides intercalated with conducting polymers

Organic-inorganic hybrid materials based on the assembly between inorganic 2D host structure and polymer have received considerable attention in the last few years. This emerging class of materials presents several applications according to their structural and functional properties. Particularly, among others, layered double hydroxides (LDHs) provide the opportunity of preparing new organically modified 2D nanocomposites. Pyrrole carboxylic acid derivatives, namely 4-(lH-pyrrol-1-yl)benzoate, 3-(pyrrol-i-yl)-propanoate,7-(pyrrol-1-yl)-heptanoate, and aniline carboxylic acid derivative, namely 3-aminobenzoic acid, have been intercalated in LDHs of intralamellar composition Zn2Al(OH)(6). The LDHs were synthesized by the co-precipitation method at constant pH followed by hydrothermal treatment for 72 h. The materials were characterized by powder X-ray diffraction patterns (PXRD), transmission electron microscopy (TEM) thermogravimetric analysis (TGA), and electron spin resonance (ESR). The basal spacing found by the PXRD technique gives evidence of the formation of bilayers of the intercalated anions. ESR spectra present a typical signal with a superhyperfine structure with 6 + 1 lines (g = 2.005 +/- 0.0004), which is assigned to the interaction between a carboxylate radical from the guest molecules and a nearby aluminium nucleus (I = 5/2) from the host structure. Additionally, the ESR data suggest that the monomers are connected to each other in limited number after thermal treatment. (c) 2007 Elsevier Ltd. All rights reserved.

ZnO-TiO2 composite formed by mixed oxides via polyol

Among the researches on preparation and test of nanostructured materials, titanium dioxide and zinc oxide have been the most frequent studied oxides. In order to extend their properties, composites have been prepared using three different methods: Polyol Method, Sol-gel Process and a combination of the two processes (hybrid process). Recent research showed best properties in composite materials than in pure oxides. In this work is presented the preparation and the structural characterization of ZnO-TiO2 composite nanostructures to be tested for their performance in electrocatalysis and in further trial on photovoltaic cells.

Thermodynamic and electronic study of Ga-1 _ xMnxN films. A theoretical study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Exotic dark spinor fields

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)