Perfiles profesionales y planes de formación. Contextualización, análisis y propuestas para la Facultad de Ingeniería en Alimentos de la Universidad Técnica de Ambato, Ecuador

El universo de las aulas actualmente está sometido a un sin número de factores que ponen en duda la pertinencia de los conocimientos adquiridos durante la formación de un profesional. La influencia de factores como la globalización del conocimiento dada por las nuevas tecnologías de la información, la diversificación de los sistemas de comercialización y producción, la participación activa de los actores involucrados en la vida ciudadana, así como, la modificación de la política, economía y sociedad que se manifiesta en Ecuador, en Latinoamérica y el mundo evidencian la necesidad de revisar las capacidades y logros de aprendizaje que deben poseer los futuros gestores del desarrollo de los pueblos. El objetivo del presente trabajo es identificar las funciones que debe desempeñar un ingeniero en Alimentos para satisfacer las actuales necesidades de la sociedad. Así como, los logros de aprendizaje que permitirán a la universidad monitorear el avance de la formación académica del estudiante. Para lo cual esta investigación se ha enfocado en el análisis del contexto que envuelve el desempeño de los profesionales “Iniciales” (Hawes y Corvalán, 2005) encargados de generar alimentos sanos, inocuos y no perecederos para una sociedad diversa de regímenes comunes y especiales que necesitan cubrir sus necesidades básicas, alimentarse correctamente, disponer del alimento económicamente accesible y asegurar la disponibilidad de alimentos para las futuras generaciones. La calidad de la educación y su contribución para el desarrollo de una sociedad ha sido estudiada y continuamente mejorada en todo el mundo; esta investigación aporta en este contexto. A continuación se sintetiza los contenidos de esta tesis. En el capítulo I, se analiza la evolución de la Educación Superior en Ecuador, la cual a lo largo de la historia presenta un comportamiento cíclico incluso en aspectos como investigación y desarrollo de la ciencia. Los gobernantes de turno han mostrado claramente su convencimiento por el impulso o no de la educación en el país, creando ambientes de avance, retroceso o estático desarrollo...

Retalho de reposicionamento coronal vs.técnica de tunelização para recobrimento radicular

Introdução: Ao longo da última década a procura por um sorriso estético (inclui harmonia e continuidade de forma) transformou-se numa preocupação relevante na Medicina Dentária e em particular nos tratamentos periodontais. As recessões gengivais com as consequentes exposições radiculares e alteração morfológica dos tecidos periodontais, podem constituir um problema estético importante podendo trazer outros problemas associados. Objetivo: O objetivo deste trabalho é identificar qual a técnica cirúrgica mais vantajosa para recobrimento radicular (RRC, RRC com ETC e TUN) e saber em que situações uma poderá ser melhor escolha que a outra, sabendo que ambas são técnicas de alta fiabilidade. Materiais e métodos: Para o cumprimento do objetivo, foi desenvolvida uma pesquisa entre Junho e Setembro de 2016, de artigos em português e inglês, sem limites temporais, recorrendo às bases de dados electrónicas: PUBMED e Google Académico utilizando para o efeito as seguintes “palavras-chave”: “tunnel technique”, “microsurgery”, “recession coverage”, “connective tissue graft”, “coronally advanced flap”, “coronally advanced flap vs. tunnel technique”. Foram utilizados 40 artigos científicos e duas obras literárias (Clinical Periodontology and Implant Dentistry e Plastic-Esthetic Periodontal and Implant Surgery) para complementar o tema. Conclusão: Segundo a literatura publicada e consultada, os procedimentos mais eficazes são aqueles que utilizam enxertos de tecido conjuntivo para o aumento da espessura gengival. Sendo que comparando as duas técnicas Retalho de Reposicionamento Coronal e Técnica de Tunelização, a segunda leva vantagem em relação à primeira, uma vez que, necessitando de menos incisões trará aspetos positivos quanto à cicatrização pois permite maior aporte sanguíneo, além de haver uma preservar das papilas.

La eficiencia del proceso formal de defensa de la floresta contra incendios en Portugal (El nivel de eficiencia real del Guía Técnico para la elaboración de Planes Municipales de Defensa de la Floresta Contra Incendios)

Tesis inédita presentada en la Universidad Europea de Madrid. Facultad de Ciencias Sociales. Programa de Doctorado en Economía y Empresa

2 Black Planes

Combined media on photographic paper. 78½" x 56" Ruth and Jake Bloom Collection

Based Planes by Facility

This is a list of airports in South Carolina and the kinds of planes that are based there. It is broken down by facility name, FAA ID, type, single, multi, jet, helicopter, glider, military and ultralight.

Based Planes by Facility

This is a list of airports in South Carolina and the kinds of planes that are based there. It is broken down by facility name, FAA ID, type, single, multi, jet, helicopter, glider, military and ultralight.

ORDENAMIENTO TERRITORIAL Y PLANES REGULADORES: NOTAS AL MARGEN DE NUESTRA EXPERIENCIA EN LA ECG – UNA

Esta presentación  tiene como objetivo sintetizar  la experiencia de  la participación de  la ECG en  las propuestas de ordenamiento territorial y la planificación urbana.Se trata es de evaluar la experiencia vista en su conjunto, es decir, nos interesa mas que las cuestiones técnicas, especificas, exponer cómo se ha desarrollado nuestra práctica frente a un objeto general que llamaremos “ordenamiento del territorio” desde la perspectiva de una geografía aplicada que opera en una formación socio política particular, es decir, en Costa Rica.Palabras Claves: Ordenamiento territorial. Planes reguladores. Urbanismo. Gobierno local. Interdisciplinariedad. Metodología positivista.AbstractThis presentation has as its objective to synthesize the experience of the ECG in participating in territorial organizational proposals and urban planning. It attempts to evaluate the experience viewed in its entirety, that is to say, the technical questions interest us less than showing how our practice has developed set against a general objective that we will call «territorial organization « from the perspective of applied geography that functions in a particular sociopolitical formation, that is to say, in Costa Rica.Key Words: Territorial Organization, Regulatory Plans, Urbanization, Local Government, Interdisciplinary, Positivist Methodology.

PROPUESTA PARA LA ELABORACIÓN DE UN PLAN DE TRANSPORTE URBANO, DENTRO DEL CONTEXTO DE LOS PLANES REGULADORES EN COSTA RICA

En este artículo se plantean los elementos fundamentales que deben contener un plan de transporte, dentro del contexto de los Planes Reguladores en Costa RicaSe pretende que este documento sirva de guía metodológica en la elaboración de los planes reguladores, en la sección correspondiente al transporte y la vialidad. Actualmente existe un vacío teórico metodológico que se refleja en una ambigüedad conceptual y en una falta de rigurosidad metodológica, provocada por la interpretación que cada uno hace de las diferentes leyes de la planificación urbana que existen en nuestro país. Con el traspaso de los recursos obtenidos de la ley de bienes inmuebles a las municipalidades, se hace imperativo que la mayoría de las municipalidades, que no han elaborado un plan regulador, se aboquen a hacerlo y que numerosos consultores privados e institutos y escuelas universitarias ofrezcan esos servicios.El trabajo recoge la experiencia de varios años de investigación en ese campo y la participación en numerosos congresos y conferencias a nivel nacional e internacional.ABSTRACT:This article dcals with the principal elements which a transportation plan should contain, within the context of regulatory plan in Costa Rica.It is hoped that thís document wilI gcncrally serve as a methological guide for the design of thosc rcgulatory plans, and particulary with regard to the scction dealing with transportation and roadways.There exists at prcsent a theoretical and methodological vacuum in this area which is reflected in a conceptual ambiguity and lack of methodological discipline, due to the various individual interpretations applied to ihose urban planning laws which do exist in this country.Statutory revisions now prov ide for the allocation of proceeds from real property taxes to the municipalities, thus making it emperative that those local governments which have not done so, promptly design their own regulatory plan, and that public and private consultants, as well as institutions of learning and research, offer their specialized expertise to this effort.Morever, this anide presents the results of many years of research in Ihis area in addition to the lessons learned from a continuing participation in conferences, seminars and events of a similar nature, heid at both national and international leveis.

PLAN PARA INCORPORAR EL RIESGO SISMICO A LOS PLANES DE USO DEL TERRENO.

Este artículo es parte de una tesis de maestría sobre el riesgo sísmico. Analiza para el caso de Puerto Rico los contenidos del modelo de intervención, la zonificación sísmica, el impacto sísmico y la mitigación de daños a estructuras existentes. Todo ello se relaciona con los planes del uso del terreno y los reglamentos de zonificación necesarios.

ESBOZO HISTÓRICO DE LA GEOMORFOLOGÍA Y SU PAPEL COMO CIENCIA APLICADA EN EL CONTEXTO DE LOS PELIGROS NATURALES Y LOS PLANES REGULADORES

En este artículo se realizan algunas consideraciones relacionadas con  los antecedentes históricos que han contribuido al nacimiento de la geomorfología como ciencia. Los enfoques y perspectivas de autores representativos se  insertan a manera de proveer un hilo conductor que sitúa y analiza estos aportes, de forma que se observen las etapas más relevantes tanto en su construcción episte-mológica como en el abordaje de los peligros naturales y su aplicación en los planes reguladores.

A new measure to quantify chest wall deformity in scoliosis patients : does rib hump measurement correlate with anterior chest wall deformity post surgery?

The primary aims of scoliosis surgery are to halt the progression of the deformity, and to reduce its severity (cosmesis). Currently, deformity correction is measured in terms of posterior parameters (Cobb angles and rib hump), even though the cosmetic concern for most patients is anterior chest wall deformity. In this study, we propose a new measure for assessing anterior chest wall deformity and examine the correlation between rib hump and the new measure. 22 sets of CT scans were retrieved from the QUT/Mater Paediatric Spinal Research Database. The Image J software (NIH) was used to manipulate formatted CT scans into 3-dimensional anterior chest wall reconstructions. A ‘chest wall angle’ was then measured in relation to the first sacral vertebral body. The chest wall angle was found to be a reliable tool in the analysis of chest wall deformity. No correlation was found between the new measure and rib hump angle. Since rib hump has been shown to correlate with vertebral rotation on CT, this suggests that there maybe no correlation between anterior and posterior deformity measures. While most surgical procedures will adequately address the coronal imbalance & posterior rib hump elements of scoliosis, they do not reliably alter the anterior chest wall shape. This implies that anterior chest wall deformity is to a large degree an intrinsic deformity, not directly related to vertebral rotation.

Lateral bone density variations in the scoliotic spine

Adolescent Idiopathic Scoliosis (AIS) is the most common deformity of the spine, affecting 2-4% of the population. Previous studies have shown that the vertebrae in scoliotic spines undergo abnormal shape changes, however there has been little exploration of how AIS affects bone density distribution within the vertebrae. Existing pre-operative CT scans of 53 female idiopathic scoliosis patients with right-sided main thoracic curves were used to measure the lateral (right to left) bone density profile at mid-height through each vertebral body. This study demonstrated that AIS patients have a marked convex/concave asymmetry in bone density for vertebral levels at or near the apex of the scoliotic curve. To the best of our knowledge, the only previous studies of bone density distribution in AIS are those of Périé et al [1,2], who reported a coronal plane ‘mechanical migration’ of 0.54mm toward the concavity of the scoliotic curve in the lumbar apical vertebrae of 11 scoliosis patients. This is comparable to the value of 0.8mm (4%) in our study, especially since our patients had more severe scoliotic curves. From a bone adaptation perspective, these results suggest that the axial loading on the scoliotic spine is strongly asymmetric.

Computer simulation in spine biomechanics : An application in adolescent idiopathic scoliosis

Scoliosis is a spinal deformity, involving a side-to-side curvature of the spine in the coronal plane as well as a rotation of the spinal column in the transverse plane. The coronal curvature is measured using a Cobb angle. If the deformity is severe, treatment for scoliosis may require surgical intervention whereby a rod is attached to the spinal column to correct the abnormal curvature. In order to provide surgeons with an improved ability to predict the likely outcomes following surgery, techniques to create patient-specific finite element models (FEM) of scoliosis patients treated at the Mater Children’s Hospital (MCH) in Brisbane are being developed and validated. This paper presents a comparison of the simulated and clinical data for a scoliosis patient treated at MCH.

Geological control of physiography in Southeast Queensland: A multi-scale analysis using GIS

The study reported here, constitutes a full review of the major geological events that have influenced the morphological development of the southeast Queensland region. Most importantly, it provides evidence that the region’s physiography continues to be geologically ‘active’ and although earthquakes are presently few and of low magnitude, many past events and tectonic regimes continue to be strongly influential over drainage, morphology and topography. Southeast Queensland is typified by highland terrain of metasedimentary and igneous rocks that are parallel and close to younger, lowland coastal terrain. The region is currently situated in a passive margin tectonic setting that is now under compressive stress, although in the past, the region was subject to alternating extensional and compressive regimes. As part of the investigation, the effects of many past geological events upon landscape morphology have been assessed at multiple scales using features such as the location and orientation of drainage channels, topography, faults, fractures, scarps, cleavage, volcanic centres and deposits, and recent earthquake activity. A number of hypotheses for local geological evolution are proposed and discussed. This study has also utilised a geographic information system (GIS) approach that successfully amalgamates the various types and scales of datasets used. A new method of stream ordination has been developed and is used to compare the orientation of channels of similar orders with rock fabric, in a topologically controlled approach that other ordering systems are unable to achieve. Stream pattern analysis has been performed and the results provide evidence that many drainage systems in southeast Queensland are controlled by known geological structures and by past geological events. The results conclude that drainage at a fine scale is controlled by cleavage, joints and faults, and at a broader scale, large river valleys, such as those of the Brisbane River and North Pine River, closely follow the location of faults. These rivers appear to have become entrenched by differential weathering along these planes of weakness. Significantly, stream pattern analysis has also identified some ‘anomalous’ drainage that suggests the orientations of these watercourses are geologically controlled, but by unknown causes. To the north of Brisbane, a ‘coastal drainage divide’ has been recognized and is described here. The divide crosses several lithological units of different age, continues parallel to the coast and prevents drainage from the highlands flowing directly to the coast for its entire length. Diversion of low order streams away from the divide may be evidence that a more recent process may be the driving force. Although there is no conclusive evidence for this at present, it is postulated that the divide may have been generated by uplift or doming associated with mid-Cenozoic volcanism or a blind thrust at depth. Also north of Brisbane, on the D’Aguilar Range, an elevated valley (the ‘Kilcoy Gap’) has been identified that may have once drained towards the coast and now displays reversed drainage that may have resulted from uplift along the coastal drainage divide and of the D’Aguilar blocks. An assessment of the distribution and intensity of recent earthquakes in the region indicates that activity may be associated with ancient faults. However, recent movement on these faults during these events would have been unlikely, given that earthquakes in the region are characteristically of low magnitude. There is, however, evidence that compressive stress is building and being released periodically and ancient faults may be a likely place for this stress to be released. The relationship between ancient fault systems and the Tweed Shield Volcano has also been discussed and it is suggested here that the volcanic activity was associated with renewed faulting on the Great Moreton Fault System during the Cenozoic. The geomorphology and drainage patterns of southeast Queensland have been compared with expected morphological characteristics found at passive and other tectonic settings, both in Australia and globally. Of note are the comparisons with the East Brazilian Highlands, the Gulf of Mexico and the Blue Ridge Escarpment, for example. In conclusion, the results of the study clearly show that, although the region is described as a passive margin, its complex, past geological history and present compressive stress regime provide a more intricate and varied landscape than would be expected along typical passive continental margins. The literature review provides background to the subject and discusses previous work and methods, whilst the findings are presented in three peer-reviewed, published papers. The methods, hypotheses, suggestions and evidence are discussed at length in the final chapter.

Development of a computer simulation tool for application in adolescent spinal deformity surgery

Scoliosis is a three-dimensional spinal deformity which requires surgical correction in progressive cases. In order to optimize correction and avoid complications following scoliosis surgery, patient-specific finite element models (FEM) are being developed and validated by our group. In this paper, the modeling methodology is described and two clinically relevant load cases are simulated for a single patient. Firstly, a pre-operative patient flexibility assessment, the fulcrum bending radiograph, is simulated to assess the model's ability to represent spine flexibility. Secondly, intra-operative forces during single rod anterior correction are simulated. Clinically, the patient had an initial Cobb angle of 44 degrees, which reduced to 26 degrees during fulcrum bending. Surgically, the coronal deformity corrected to 14 degrees. The simulated initial Cobb angle was 40 degrees, which reduced to 23 degrees following the fulcrum bending load case. The simulated surgical procedure corrected the coronal deformity to 14 degrees. The computed results for the patient-specific FEM are within the accepted clinical Cobb measuring error of 5 degrees, suggested that this modeling methodology is capable of capturing the biomechanical behaviour of a scoliotic human spine during anterior corrective surgery.