How does household energy consumption contribute to PM10 emissions?

Particle Pollution (PM) is a major problem in urban environments. There is serious health risks associated with exposure to PM. In addition, particulate matter also contributes to greenhouse effects and global warming. PM originates mainly from fuel combustion. In this paper, we attempt to study household energy use contributions to experienced levels of PM concentrations. We find that there is a strong positive association between household gasoline consumption and urban air pollution. Residential natural gas use is also associated with poor air quality.

Valorization of grape pomace through hot compressed water extraction/hydrolysis

The world energy consumption is expected to increase strongly in coming years, because of the emerging economies. Biomass is the only renewable carbon resource that is abundant enough to be used as a source of energy Grape pomace is one of the most abundant agro-industrial residues in the world, being a good biomass resource. The aim of this work is the valorization of grape pomace from white grapes (WWGP) and from red grapes (RWGP), through the extraction of phenolic compounds with antioxidant activity, as well as through the extraction/hydrolysis of carbohydrates, using subcritical water, or hot compressed water (HCW). The main focus of this work is the optimization of the process for WWGP, while for RWGP only one set of parameters were tested. The temperatures used were 170, 190 and 210 °C for WWGP, and 180 °C for RWGP. The water flow rates were 5 and 10 mL/min, and the pressure was always kept at 100 bar. Before performing HCW assays, both residues were characterized, revealing that WWGP is very rich in free sugars (around 40%) essentially glucose and fructose, while RWGP has higher contents of structural sugars, lignin, lipids and protein. For WWGP the best results were achieved at 210 °C and 10 mL/min: higher yield in water soluble compounds (69 wt.%), phenolics extraction (26.2 mg/g) and carbohydrates recovery (49.3 wt.% relative to the existing 57.8%). For RWGP the conditions were not optimized (180 °C and 5 mL/min), and the values of the yield in water soluble compounds (25 wt.%), phenolics extraction (19.5 mg/g) and carbohydrates recovery (11.4 wt.% relative to the existing 33.5%) were much lower. The antioxidant activity of the HCW extracts from each assay was determined, the best result being obtained for WWGP, namely for extracts obtained at 210 °C (EC50=20.8 μg/mL; EC50 = half maximum effective concentration; EC50 = 22.1 μg/mL for RWGP, at 180 ºC).

Secondary transmission of cryptosporidiosis associated with well water consumption: two case studies

Abstract: Cryptosporidiosis is a very prominent disease in the field of public health, and usually causes diarrhea. We describe two immunocompetent patients who presented with chronic diarrhea that was ultimately found to be caused by continuous exposure to well water contaminated with the microbial cysts (oocysts) of the Cryptosporidium spp parasite. We describe the patients' histories and possible explanations for their prolonged symptoms.

Measuring the effects of price movements on private consumption

This paper studies how shocks in the prices of Food, Energy and Financial Assets affect private consumption using a VAR Model. Then, the total effects are broken into direct and indirect effects, using the coefficients taken from the previous model. We use quarterly data for the Portuguese economy from the last 20 years. We found that energy prices and financial assets have a strong connection with consumption, suggesting that the economy may be too exposed to shocks in these markets.

`When I'm sixty-four': old age, family values, and private financial transfers

Private financial transfers are becoming more and more important as ageing levels increase in Europe, with elders acting as both givers and receivers. Our study is divided in two main parts. In the first part we analyse the determinants of private financial transfers, using the Survey of Health, Ageing, and Retirement in Europe (SHARE). In the second part we analyse the importance of family values for these transfers, combining SHARE with European Values Study. We show that family functions as the main agent of private transfers. We conclude that family values drive financial transfers, mainly gifts provided by elderly individuals. We find that receipts by old-aged people are more related with need cases, such as illness and poorness; moreover, for these particular cases, family network plays a very important role, working as a safety net.

What Fidelidade group should do to convey its human centric brand identity values to millennial insurance consumers

Companies are concerned in attracting and retaining Millennial consumers, especially if their relation with this target audience is weak. This happens in the insurance industry in Portugal and in Fidelidade group specifically. The aim of this study is to recommend a strategy for the insurance group to improve its relationship with these consumers, by conveying its human centric values. In order to address this goal, we developed a qualitative research. The main insight is that Millennials may perceive those values in the industry but do not associate them with insurance brands.

The effects of cultural heritage on residential property values: Evidence from Lisbon, Portugal

This paper examines the impact of historic amenities on residential housing prices in the city of Lisbon, Portugal. Our study is directed towards identifying the spatial variation of amenity values for churches, palaces, lithic (stone) architecture and other historic amenities via the housing market, making use of both global and local spatial hedonic models. Our empirical evidence reveals that different types of historic and landmark amenities provide different housing premiums. While having a local non-landmark church within 100 meters increases housing prices by approximately 4.2%, higher concentrations of non-landmark churches within 1000 meters yield negative effects in the order of 0.1% of prices with landmark churches having a greater negative impact around 3.4%. In contrast, higher concentration of both landmark and non-landmark lithic structures positively influence housing prices in the order of 2.9% and 0.7% respectively. Global estimates indicate a negative effect of protected zones, however this significance is lost when accounting for heterogeneity within these areas. We see that the designation of historic zones may counteract negative effects on property values of nearby neglected buildings in historic neighborhoods by setting additional regulations ensuring that dilapidated buildings do not damage the city’s beauty or erode its historic heritage. Further, our results from a geographically weighted regression specification indicate the presence of spatial non-stationarity in the effects of different historic amenities across the city of Lisbon with variation between historic and more modern areas.

The consumption of beauty products on famale young adults in Portugal. Recommenrations for the brand Lancôme to improve its store trafic

This project aims to explore the Portuguese Beauty and Cosmetics market, and to discuss the usage and purchase behaviour of young female adults, between 18 and 26 years old. After a market analysis based on secondary data, it evaluates the results of qualitative and quantitative research based on 9 interviews and 126 online questionnaires to explore the consumers’ reasoning when choosing products from this category – fragrances, skin care or make-up – as well as their attitude towards brands, with a special focus on the premium cosmetics brand Lancôme. Contrary to our expectations there was no statistically significant positive influence of the online touchpoints within this age segment’s purchase intention. However, results indicate that Lancôme is already being perceived by some as young and modern, but is still suffering the threat of Mass Market brands that are valued by this target, mainly due to a price sensitivity towards premium beauty brands.

Community indentification in peer-t-peer collaborative consumption services

Even though collaborative consumption (CC) is gaining economic importance, research in CC is still in its infancy. Consumers’ reasons for participating have already been investigated but little research on consequences of participation has been conducted. This article examines whether interactions between customers in peer-to-peer CC services influence the willingness to coproduce service outcomes. Drawing on social exchange theory, it is proposed that this effect is mediated by consumers’ identification with the brand community. Furthermore, continuance intention in CC is introduced as a second stage moderator. In a cross-sectional study, customers of peer-to-peer accommodation sharing are surveyed. While customer-to-customer interactions were found to have a positive effect on brand community identification, brand community identification did not positively affect co-production intention. Surprisingly, the effect of brand community identification on co-production intention was negative. Moreover, continuance intention of customers did not moderate this relationship. Bearing in mind current challenges for researchers and companies, theoretical and managerial implications are discussed.

Forest biomass and wood consumption In the lower course of the Amazon: a case study of rhe Urubueua Island

Várzea and terra-firme forests in the lower course of the Amazon were compared in terms of forest structure, wood volume increments and forest biomass. The wood volume of várzea forests was smaller than that of terra-firme forests, particularly when severe human intervention such as the cultivation of açaí palm occurred. The difference was even greater in the forest weight comparison because of the lower wood density of várzea trees. These trees are not directly influenced by water stress during the dry season, while late wood with a high density is formed in the terra-firme trees. The annual forest disappearance area due to firewood for tile factories was estimated to be about 276 ha on the island investigated, which had an area of 36,200 ha. Assuming that the forests are rotatively cultivated every 25 to 30 years, the total deforestation area is 6,870-6,948 ha in 25 years and 8,244~8,337 ha in 30 years. This result means that the balance between forest biomass and utilization is not in crisis, however, this balance might be lost as long as substitutive energy such as electricity is not supplied.

Development of benchmarks for operating costs and resources consumption to be used in healthcare building sustainability assessment methods

Since the last decade of the twentieth century, the healthcare industry is paying attention to the environmental impact of their buildings and therefore new regulations, policy goals and Buildings Sustainability Assessment (HBSA) methods are being developed and implemented. At the present, healthcare is one of the most regulated industries and it is also one of the largest consumers of energy per net floor area. To assess the sustainability of healthcare buildings it is necessary to establish a set of benchmarks related with their life-cycle performance. They are both essential to rate the sustainability of a project and to support designers and other stakeholders in the process of designing and operating a sustainable building, by allowing the comparison to be made between a project and the conventional and best market practices. This research is focused on the methodology to set the benchmarks for resources consumption, waste production, operation costs and potential environmental impacts related to the operational phase of healthcare buildings. It aims at contributing to the reduction of the subjectivity found in the definition of the benchmarks used in Building Sustainability Assessment (BSA) methods, and it is applied in the Portuguese context. These benchmarks will be used in the development of a Portuguese HBSA method.

Characterization of pesticide consumption in the county of Santarém, Pará, Brazil

Many potentially harmful pesticides for both human health and the environment are used in Brazilian Amazon. However, no scientific datum on pesticide usage is presently available for this region. Consequently, it is difficult to assess which substances arc used and in which quantities. As an important premise for future work on pesticide contamination in the county of Santarém (State of Pará, Brazil), a survey was conducted in order to qualify and quantify the use of some pesticides in this region. This investigation was made between January and March 1997 and August and October 1998 and revealed use of several organophosphates, synthetic pyrethroids and carbamates insecticides. Furthermore, many herbicides and fungicides were listed. These pesticides are used for agriculture, domestic, and sanitary programs. This paper also provides a first estimation of quantities of some insecticides commonly used in agriculture (chlorpyrifos, malathion, metamidophos and methyl-parathion). The annual consumption for these four compounds is estimated at ca. 1 910 kg. Organophosphate insecticide consumption in the county of Santarém seems to be lower than the Brazilian average in terms of «per capita» and «per agricultural area» consumptions. Nevertheless, this county uses toxic substances on sensitive environments such as floodplains (várzeas), making relevant a thorough study on the potential contamination of this environment and its biota.

Transport of Pirarucu Arapaima gigas juveniles in plastic bag

This study examined the stress response of pirarucu juveniles in a closed system transport. Pirarucu (Arapaima gigas) is a native Amazonian fish species from the Osteoglossidae family and an obligated air breather. A short duration transport trial (6h) was undertaken comparing closed polyethylene bags filled with atmospheric air (Air group) and bags filled with pure oxygen (Oxi group). Dissolved oxygen was the only water parameter that presented a difference between fish groups, and was saturated in the oxi group as expected. There was no mortality in either group after transport. Fish feeding was observed 36 h after transport for all fish, and normal feeding consumption was observed at 72 h. In both groups physiological responses were similar. Cortisol did not show any significant alteration during the sampled period. Unlike most fish species, cortisol values were unaltered in both groups during sampling, while glucose presented a significant change up to 12 h after transport. The results showed that pirarucu transport in plastic bags could be made with either atmospheric air or pure oxygen, since physiological response to stress, water quality and feeding behavior after 36 h were similar in both groups.

Monitoring energy consumption in android applications

Dissertação de Mestrado em Engenharia Informática

Producing LFT composite parts for large consumption markets from thermoplastic powder-coated towpregs

Thermoplastic matrix composites are receiving increasing interest in last years. This is due to several advantageous properties and speed of processing of these materials as compared to their thermoset counterparts. Among thermoplastic composites, Long Fibre Thermoplastics (LFTs) have seen the fastest growth, mainly due to developments in the automotive sector. LFTs combine the (semi-)structural material properties of long (>1 cm) fibres, with the ease and speed of thermoplastic processing. This paper reports a study of a novel low-cost LFT technology and resulting composites. A patented powder-coating machine able to produce continuously pre-impregnated materials directly from fibre rovings and polymer powders was used to process glass-fibre reinforced polypropylene (GF/PP) towpregs. Such pre-impregnated materials were then chopped and used to make LFTs in a patented low-cost piston-blender developed by the Centre of Lightweight Structures, TUD-TNO, the Netherlands. The work allowed studying the most relevant towpreg production parameters and establishing the processing window needed to obtain a good quality GF/PP powder coated material. Finally, the processing window that allows producing LFTs of good quality in the piston-blender and the mechanical properties of final stamped GF/PP composite parts were also determined.