A influência da temperatura na secagem forçada da matéria-prima cerâmica da Formação Corumbataí na região do Polo de Santa Gertrudes (SP)

Pós-graduação em Geociências e Meio Ambiente - IGCE

Materiais híbridos argila-poli(metil metacrilato) obtidos através do método grafting

Pós-graduação em Química - IQ

Radarfacies and sedimentological analysis: study of sedimentary substrate from an archaeological site (shell mound), southern Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Variação da resistividade elétrica para três solos não saturados

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização hidrogeoquímica, isotópica e diagenética do sistema aquífero Bauru no Estado de São Paulo

Pós-graduação em Geociências e Meio Ambiente - IGCE

Caracterização hidrogeoquímica, isotópica e diagenética do sistema aquífero Bauru no Estado de São Paulo

Pós-graduação em Geociências e Meio Ambiente - IGCE

A note on a mineralogical analysis of the sediments associated with the Plata River and Patos Lagoon outflows

Riverine waters bring to seas a variety of suspended materials, which are ultimately deposited on the shelf or exported to the deep ocean. Investigation of the mineralogical contents of these continental-borne constituents on seafloors may reveal valuable information about the environmental conditions in the drainage basin. In this note we report results of X-ray diffraction and other analysis of sediments in bottom samples collected on the continental shelf under influence of the Plata River and the Patos Lagoon, in South America. The analysis reveals that non-clay materials are mostly concentrated south of 33 degrees S, while clay sediments are relatively more abundant further north. We propose that such distributions are controlled by the circulation pattern and water mass distribution of the lower and upper layers, respectively. (C) 2008 Elsevier Ltd. All rights reserved.

Hybrid Materials Based on Smectite Clays and Nutraceutical Anthocyanins from the Acai Fruit

Hybrid materials were prepared by combining clay mineral (montmorillonite SWy-2 and saponite SapCa-1) and dyes extracted from the acai (Euterpe oleracea Mart.) fruit, which contains mainly anthocyanins from the 3-glucoside class, to increase the stability of the dye and facilitate its handling and storage. Clay minerals are common ingredients in therapeutic and pharmaceutical products and acai phytochemicals show disease prevention properties. The extract of the acai fruit was mixed with water suspensions of layered silicates in different proportions. The dyeclay hybrids presented incorporated organic material in amounts up to 24 wt.-%. X ray diffractometry and vibrational (FTIR and Raman) and electronic spectroscopic data showed that flavylium cations were successfully intercalated between the inorganic layers. Mass-coupled thermogravimetric analysis (TGA-MS) data showed a significant gain in the thermostability of the organic species in relation to anthocyanins in the extract. MS curves related to CO2 release (m/z = 44) are ascendant above 200 degrees C when the dye cations are confined to the inorganic structure. The radical scavenging activity of the hybrid materials was monitored by electron paramagnetic resonance (EPR) toward the stable radical DPPH (1,1-diphenyl-2-picrylhydrazyl) and compared to the activity of the acai extract. In addition to the fact that interaction with clay minerals improves the stability of the acai dyes against heat, their properties as radical scavengers are preserved after intercalation. The improvement in the properties of the nutraceutical species by intercalation by using biocompatible inorganic structures can be valuable for human therapy.

Petrographie und Geochemie des Eckfelder Maares und von Hillscheid und die Einbindung in den Hocheifelvulkanismus

Tertiäre Vulkanite aus dem Eckfelder Maar, dem Hillscheider Diatrem und dem Hillscheid Basalt (Schlot) wurden petrologisch und geochemisch untersucht. Bis auf tonige Klasten aus dem Bohrkern des Eckfelder Maares handelt es sich bei allen weiteren Proben um undifferenzierte basische Vulkanite. Die tonigen Klasten aus dem Bohrkern müssen der ehemaligen Landoberfläche vor der Eruption des Eckfelder Maares zugerechnet werden, in dessen Krater sie während der Eruption hineingefallen sind. Bis auf die Proben des Hillscheid Basaltes sind die Proben alteriert. Die Alteration zeigt sich an der Bildung von Zeolithen und Calcitmineralisationen, die primär und sekundär gebildete Hohlräume aufgefüllt haben oder an einer vertonten Grundmasse der Proben, die daneben Mineraleinschlüsse (Spinell) und kantige Fremdgesteinsbruchstücke enthalten können. Bei den Proben mit vertonter Grundmasse handelt es sich um Palagonite, Umwandlungsprodukte aus Sideromelan (basaltischem Glas). Geochemische Analysen an Grundmassepräparaten der alterierten bis vertonten Proben zeigen, dass außer den immobilen Elementen Ti, Nb, Zr, Y alle weiteren Elemente teilweise bis vollständig abgereichert worden sind. Eine Ausnahme bildet Barium (Ba), welches z.T. in beträchtlichen Mengen in Zeolithen (Harmotom) angereichert wurde. Bei den Proben aus dem Eckfelder Maar kann die Alteration bis Vertonung der Proben alleine mit der Palagonitisierung und Verwitterung erklärt werden. Es gibt keine Hinweise auf Materialzufuhr und damit für sich anschließende hydrothermale Prozesse. Die Proben des Hillscheider Diatrem sind wesentlich geringer alteriert (glasige Grundmasse). Neuste Erkenntnisse aus einer Bohrung im Sommer 1999 im vermuteten Zentrum des Hillscheider Diatrems beschränken das Diatrem maximal auf einen kleineren Bereich im Nordosten der bisherigen Lokation. Bei der Bohrung stieß man nach 20 Meter auf Anstehendes. Im Hangschutt darüber fand man Blöcke des Hillscheid Basaltes. Eine geringere Größe der Lokation zusammen mit der geringen Alteration könnten auf deren Entstehung mit einer initialen Maarphase gefolgt von Schlackentätigkeit hinweisen. Die Schlacken könnten die ersten Ablagerungen vor Verwitterung geschützt haben. Allerdings gibt es keine Funde die eine Schlackentätigkeit belegen. Beim sogenannten 'Hillscheider Diatrem' könnte es sich aber auch um Hangschutt aus der Randbreccie des Hillscheider Basaltes handeln. Zusammen mit Bruchstücken aus dem Schlot des Hillscheid Basaltes wären die Palagonite des sogenannten 'Hillscheider Diatrem' erst in jüngster Zeit im Bereich einer Uferböschung zur Ablagerung gekommen. Dies würde allerdings das sogenannte 'Hillscheider Diatrem' in seiner Existenz in Frage stellen. Vergleiche der Proben des Hillscheid Basaltes mit basischen Hocheifelvulkaniten deuten auf kogenetische Beziehung aller Proben untereinander und ordnen die Proben des Hillscheid Basaltes geochemisch dem Hocheifelvulkanismus zu. REE- und weitere Spurenelementgehalte und auch deren Elementverhältnisse weisen für alle tertiären Eifelvulkanite gemeinsam auf Mantelschmelzen aus dem Bereich eines Granatperidotits mit niedrigen Aufschmelzgraden um ein Prozent hin. Vergleich der Elementverhältnisse hochinkompatibler Elemente im Bezug auf die Bildung mafischer Schmelzen mit primitivem Mantel deuten darauf hin, dass der Mantel im Bereich der Hocheifel verarmt ist an K, Rb, Sr und angereichert an Ba und eventuell an Nb. Ursachen für diese von typisch primären Mantelzusammensetzung abweichenden Verhältnisse könnten durch Mischungen von Mantelschmelzen mit lithosphärischem Mantel (K-Anomalie) und durch Anreicherungen mit fluiden Phasen (Ba-Anomalie) oder auch Schmelzen aus einem tieferliegenden Plume (Kelberger Hoch) verursacht worden sein. Englischer Zusammenfassung:

Speciation of Pu(III) in the environmental system humic substances-groundwater-kaolinite

For the safety assessments of nuclear waste repositories, the possible migration of the radiotoxic waste into environment must be considered. Since plutonium is the major contribution at the radiotoxicity of spent nuclear waste, it requires special care with respect to its mobilization into the groundwater. Plutonium has one of the most complicated chemistry of all elements. It can coexist in 4 oxidation states parallel in one solution. In this work is shown that in the presence of humic substances it is reduced to the Pu(III) and Pu(IV). This work has the focus on the interaction of Pu(III) with natural occurring compounds (humic substances and clay minerals bzw. Kaolinite), while Pu(IV) was studied in a parallel doctoral work by Banik (in preparation). As plutonium is expected under extreme low concentrations in the environment, very sensitive methods are needed to monitor its presence and for its speciation. Resonance ionization mass spectrometry (RIMS), was used for determining the concentration of Pu in environmental samples, with a detection limit of 106- 107 atoms. For the speciation of plutonium CE-ICP-MS was routinely used to monitor the behaviour of Pu in the presence of humic substances. In order to reduce the detection limits of the speciation methods, the coupling of CE to RIMS was proposed. The first steps have shown that this can be a powerful tool for studies of pu under environmental conditions. Further, the first steps in the coupling of two parallel working detectors (DAD and ICP_MS ) to CE was performed, for the enabling a precise study of the complexation constants of plutonium with humic substances. The redox stabilization of Pu(III) was studied and it was determined that NH2OHHCl can maintain Pu(III) in the reduced form up to pH 5.5 – 6. The complexation constants of Pu(III) with Aldrich humic acid (AHA) were determined at pH 3 and 4. the logß = 6.2 – 6.8 found for these experiments was comparable with the literature. The sorption of Pu(III) onto kaolinite was studied in batch experiments and it was determine dthat the pH edge was at pH ~ 5.5. The speciation of plutonium on the surface of kaolinite was studied by EXAFS/XANES. It was determined that the sorbed species was Pu(IV). The influence of AHA on the sorption of Pu(III) onto kaolinite was also investigated. It was determined that at pH < 5 the adsorption is enhanced by the presence of AHA (25 mg/L), while at pH > 6 the adsorption is strongly impaired (depending also on the adding sequence of the components), leading to a mobilization of plutonium in solution.

Using sulfur isotope fractionation to understand the atmospheric oxidation of SO 2

Sulfate aerosol plays an important but uncertain role in cloud formation and radiative forcing of the climate, and is also important for acid deposition and human health. The oxidation of SO2 to sulfate is a key reaction in determining the impact of sulfate in the environment through its effect on aerosol size distribution and composition. This thesis presents a laboratory investigation of sulfur isotope fractionation during SO2 oxidation by the most important gas-phase and heterogeneous pathways occurring in the atmosphere. The fractionation factors are then used to examine the role of sulfate formation in cloud processing of aerosol particles during the HCCT campaign in Thuringia, central Germany. The fractionation factor for the oxidation of SO2 by ·OH radicals was measured by reacting SO2 gas, with a known initial isotopic composition, with ·OH radicals generated from the photolysis of water at -25, 0, 19 and 40°C (Chapter 2). The product sulfate and the residual SO2 were collected as BaSO4 and the sulfur isotopic compositions measured with the Cameca NanoSIMS 50. The measured fractionation factor for 34S/32S during gas phase oxidation is αOH = (1.0089 ± 0.0007) − ((4 ± 5) × 10−5 )T (°C). Fractionation during oxidation by major aqueous pathways was measured by bubbling the SO2 gas through a solution of H2 O2

Investigating The Fate Of Positively Charged Nanoparticles In A Soil Environment

The recent increase in the amount of nanoparticles incorporated into commercial products is accompanied by a rising concern of the fate of these nanoparticles. Once released into the environment, it is inevitable that the nanoparticles will come into contact with the soil, introducing them to various routes of environmental contamination. One route that was explored in this research was the interaction between nanoparticles and clay minerals. In order to better define the interactions between clay minerals and positively charged nanoparticles, in situ atomic force microscopy (AFM) was utilized. In situ AFM experiments allowed interactions between clay minerals and positively charged nanoparticles to be observed in real time. The preliminary results demonstrated that in situ AFM was a reliable technique for studying the interactions between clay minerals and positively charged nanoparticles and showed that the nanoparticles affected the swelling (height) of the clay quasi-crystals upon exposure. The preliminary AFM data were complemented by batch study experiments which measured the absorbance of the nanoparticle filtrate after introduction to clay minerals in an effort to better determine the mobility of the positively charged nanoparticles in an environment with significant clay contribution. The results of the batch study indicated that the interactions between clay minerals and positively charged nanoparticles were size dependent and that the interactions of the different size nanoparticles with the clay may be occurring to different degrees. The degree to which the different size nanoparticles were interacting with the clay was further probed using FTIR (Fourier transform infrared) spectroscopy experiments. The results of these experiments showed that interactions between clay minerals and positively charged nanoparticles were size dependent as indicated by a change in the FTIR spectra of the nanoparticles upon introduction to clay.

Diffusion-driven transport in clayrock formations

Clay mineral-rich sedimentary formations are currently under investigation to evaluate their potential use as host formations for installation of deep underground disposal facilities for radioactive waste (e.g. Boom Clay (BE), Opalinus Clay (CH), Callovo-Oxfordian argillite (FR)). The ultimate safety of the corresponding repository concepts depends largely on the capacity of the host formation to limit the flux towards the biosphere of radionuclides (RN) contained in the waste to acceptably low levels. Data for diffusion-driven transfer in these formations shows extreme differences in the measured or modelled behaviour for various radionuclides, e. g. between halogen RN (Cl-36, I-129) and actinides (U-238,U-235, Np-237, Th-232, etc.), which result from major differences between RN of the effects on transport of two phenomena: diffusion and sorption. This paper describes recent research aimed at improving understanding of these two phenomena, focusing on the results of studies carried out during the EC Funmig IP on clayrocks from the above three formations and from the Boda formation (HU). Project results regarding phenomena governing water, cation and anion distribution and mobility in the pore volumes influenced by the negatively-charged surfaces of clay minerals show a convergence of the modelling results for behaviour at the molecular scale and descriptions based on electrical double layer models. Transport models exist which couple ion distribution relative to the clay-solution interface and differentiated diffusive characteristics. These codes are able to reproduce the main trends in behaviour observed experimentally, e.g. D-e(anion) < D-e(HTO) < D-e(cation) and D-e(anion) variations as a function of ionic strength and material density. These trends are also well-explained by models of transport through ideal porous matrices made up of a charged surface material. Experimental validation of these models is good as regards monovalent alkaline cations, in progress for divalent electrostatically-interacting cations (e.g. Sr2+) and still relatively poor for 'strongly sorbing', high K-d cations. Funmig results have clarified understanding of how clayrock mineral composition, and the corresponding organisation of mineral grain assemblages and their associated porosity, can affect mobile solute (anions, HTO) diffusion at different scales (mm to geological formation). In particular, advances made in the capacity to map clayrock mineral grain-porosity organisation at high resolution provide additional elements for understanding diffusion anisotropy and for relating diffusion characteristics measured at different scales. On the other hand, the results of studies focusing on evaluating the potential effects of heterogeneity on mobile species diffusion at the formation scale tend to show that there is a minimal effect when compared to a homogeneous property model. Finally, the results of a natural tracer-based study carried out on the Opalinus Clay formation increase confidence in the use of diffusion parameters measured on laboratory scale samples for predicting diffusion over geological time-space scales. Much effort was placed on improving understanding of coupled sorption-diffusion phenomena for sorbing cations in clayrocks. Results regarding sorption equilibrium in dispersed and compacted materials for weakly to moderately sorbing cations (Sr2+, Cs+, Co2+) tend to show that the same sorption model probably holds in both systems. It was not possible to demonstrate this for highly sorbing elements such as Eu(III) because of the extremely long times needed to reach equilibrium conditions, but there does not seem to be any clear reason why such elements should not have similar behaviour. Diffusion experiments carried out with Sr2+, Cs+ and Eu(III) on all of the clayrocks gave mixed results and tend to show that coupled diffusion-sorption migration is much more complex than expected, leading generally to greater mobility than that predicted by coupling a batch-determined K-d and Ficks law based on the diffusion behaviour of HTO. If the K-d measured on equivalent dispersed systems holds as was shown to be the case for Sr, Cs (and probably Co) for Opalinus Clay, these results indicate that these cations have a D-e value higher than HTO (up to a factor of 10 for Cs+). Results are as yet very limited for very moderate to strongly sorbing species (e.g. Co(II), Eu(III), Cu(II)) because of their very slow transfer characteristics. (C) 2011 Elsevier Ltd. All rights reserved.

Optimized Demineralization Technique for the Measurement of Stable Isotope Ratios of Nonexchangeable H in Soil Organic Matter

To make use of the isotope ratio of nonexchangeable hydrogen (δ2Hn (nonexchangeable)) of bulk soil organic matter (SOM), the mineral matrix (containing structural water of clay minerals) must be separated from SOM and samples need to be analyzed after H isotope equilibration. We present a novel technique for demineralization of soil samples with HF and dilute HCl and recovery of the SOM fraction solubilized in the HF demineralization solution via solid-phase extraction. Compared with existing techniques, organic C (Corg) and organic N (Norg) recovery of demineralized SOM concentrates was significantly increased (Corg recovery using existing techniques vs new demineralization method: 58% vs 78%; Norg recovery: 60% vs 78%). Chemicals used for the demineralization treatment did not affect δ2Hn values as revealed by spiking with deuterated water. The new demineralization method minimized organic matter losses and thus artificial H isotope fractionation, opening up the opportunity to use δ2Hn analyses of SOM as a new tool in paleoclimatology or geospatial forensics.