941 resultados para Charging and discharging control


Relevância:

100.00% 100.00%

Publicador:

Resumo:

This work studies the optimization and control of a styrene polymerization reactor. The proposed strategy deals with the case where, because of market conditions and equipment deterioration, the optimal operating point of the continuous reactor is modified significantly along the operation time and the control system has to search for this optimum point, besides keeping the reactor system stable at any possible point. The approach considered here consists of three layers: the Real Time Optimization (RTO), the Model Predictive Control (MPC) and a Target Calculation (TC) that coordinates the communication between the two other layers and guarantees the stability of the whole structure. The proposed algorithm is simulated with the phenomenological model of a styrene polymerization reactor, which has been widely used as a benchmark for process control. The complete optimization structure for the styrene process including disturbances rejection is developed. The simulation results show the robustness of the proposed strategy and the capability to deal with disturbances while the economic objective is optimized.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This paper presents the new active absorption wave basin, named Hydrodynamic Calibrator (HC), constructed at the University of São Paulo (USP), in the Laboratory facilities of the Numerical Offshore Tank (TPN). The square (14 m 14 m) tank is able to generate and absorb waves from 0.5 Hz to 2.0 Hz, by means of 148 active hinged flap wave makers. An independent mechanical system drives each flap by means of a 1HP servo-motor and a ball-screw based transmission system. A customized ultrasonic wave probe is installed in each flap, and is responsible for measuring wave elevation in the flap. A complex automation architecture was implemented, with three Programmable Logic Computers (PLCs), and a low-level software is responsible for all the interlocks and maintenance functions of the tank. Furthermore, all the control algorithms for the generation and absorption are implemented using higher level software (MATLAB /Simulink block diagrams). These algorithms calculate the motions of the wave makers both to generate and absorb the required wave field by taking into account the layout of the flaps and the limits of wave generation. The experimental transfer function that relates the flap amplitude to the wave elevation amplitude is used for the calculation of the motion of each flap. This paper describes the main features of the tank, followed by a detailed presentation of the whole automation system. It includes the measuring devices, signal conditioning, PLC and network architecture, real-time and synchronizing software and motor control loop. Finally, a validation of the whole automation system is presented, by means of the experimental analysis of the transfer function of the waves generated and the calculation of all the delays introduced by the automation system.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The use of tendons for the transmission of the forces and the movements in robotic devices has been investigated from several researchers all over the world. The interest in this kind of actuation modality is based on the possibility of optimizing the position of the actuators with respect to the moving part of the robot, in the reduced weight, high reliability, simplicity in the mechanic design and, finally, in the reduced cost of the resulting kinematic chain. After a brief discussion about the benefits that the use of tendons can introduce in the motion control of a robotic device, the design and control aspects of the UB Hand 3 anthropomorphic robotic hand are presented. In particular, the tendon-sheaths transmission system adopted in the UB Hand 3 is analyzed and the problem of force control and friction compensation is taken into account. The implementation of a tendon based antagonistic actuated robotic arm is then investigated. With this kind of actuation modality, and by using transmission elements with nonlinear force/compression characteristic, it is possible to achieve simultaneous stiffness and position control, improving in this way the safety of the device during the operation in unknown environments and in the case of interaction with other robots or with humans. The problem of modeling and control of this type of robotic devices is then considered and the stability analysis of proposed controller is reported. At the end, some tools for the realtime simulation of dynamic systems are presented. This realtime simulation environment has been developed with the aim of improving the reliability of the realtime control applications both for rapid prototyping of controllers and as teaching tools for the automatic control courses.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Recently in most of the industrial automation process an ever increasing degree of automation has been observed. This increasing is motivated by the higher requirement of systems with great performance in terms of quality of products/services generated, productivity, efficiency and low costs in the design, realization and maintenance. This trend in the growth of complex automation systems is rapidly spreading over automated manufacturing systems (AMS), where the integration of the mechanical and electronic technology, typical of the Mechatronics, is merging with other technologies such as Informatics and the communication networks. An AMS is a very complex system that can be thought constituted by a set of flexible working stations, one or more transportation systems. To understand how this machine are important in our society let considerate that every day most of us use bottles of water or soda, buy product in box like food or cigarets and so on. Another important consideration from its complexity derive from the fact that the the consortium of machine producers has estimated around 350 types of manufacturing machine. A large number of manufacturing machine industry are presented in Italy and notably packaging machine industry,in particular a great concentration of this kind of industry is located in Bologna area; for this reason the Bologna area is called “packaging valley”. Usually, the various parts of the AMS interact among them in a concurrent and asynchronous way, and coordinate the parts of the machine to obtain a desiderated overall behaviour is an hard task. Often, this is the case in large scale systems, organized in a modular and distributed manner. Even if the success of a modern AMS from a functional and behavioural point of view is still to attribute to the design choices operated in the definition of the mechanical structure and electrical electronic architecture, the system that governs the control of the plant is becoming crucial, because of the large number of duties associated to it. Apart from the activity inherent to the automation of themachine cycles, the supervisory system is called to perform other main functions such as: emulating the behaviour of traditional mechanical members thus allowing a drastic constructive simplification of the machine and a crucial functional flexibility; dynamically adapting the control strategies according to the different productive needs and to the different operational scenarios; obtaining a high quality of the final product through the verification of the correctness of the processing; addressing the operator devoted to themachine to promptly and carefully take the actions devoted to establish or restore the optimal operating conditions; managing in real time information on diagnostics, as a support of the maintenance operations of the machine. The kind of facilities that designers can directly find on themarket, in terms of software component libraries provides in fact an adequate support as regard the implementation of either top-level or bottom-level functionalities, typically pertaining to the domains of user-friendly HMIs, closed-loop regulation and motion control, fieldbus-based interconnection of remote smart devices. What is still lacking is a reference framework comprising a comprehensive set of highly reusable logic control components that, focussing on the cross-cutting functionalities characterizing the automation domain, may help the designers in the process of modelling and structuring their applications according to the specific needs. Historically, the design and verification process for complex automated industrial systems is performed in empirical way, without a clear distinction between functional and technological-implementation concepts and without a systematic method to organically deal with the complete system. Traditionally, in the field of analog and digital control design and verification through formal and simulation tools have been adopted since a long time ago, at least for multivariable and/or nonlinear controllers for complex time-driven dynamics as in the fields of vehicles, aircrafts, robots, electric drives and complex power electronics equipments. Moving to the field of logic control, typical for industrial manufacturing automation, the design and verification process is approached in a completely different way, usually very “unstructured”. No clear distinction between functions and implementations, between functional architectures and technological architectures and platforms is considered. Probably this difference is due to the different “dynamical framework”of logic control with respect to analog/digital control. As a matter of facts, in logic control discrete-events dynamics replace time-driven dynamics; hence most of the formal and mathematical tools of analog/digital control cannot be directly migrated to logic control to enlighten the distinction between functions and implementations. In addition, in the common view of application technicians, logic control design is strictly connected to the adopted implementation technology (relays in the past, software nowadays), leading again to a deep confusion among functional view and technological view. In Industrial automation software engineering, concepts as modularity, encapsulation, composability and reusability are strongly emphasized and profitably realized in the so-calledobject-oriented methodologies. Industrial automation is receiving lately this approach, as testified by some IEC standards IEC 611313, IEC 61499 which have been considered in commercial products only recently. On the other hand, in the scientific and technical literature many contributions have been already proposed to establish a suitable modelling framework for industrial automation. During last years it was possible to note a considerable growth in the exploitation of innovative concepts and technologies from ICT world in industrial automation systems. For what concerns the logic control design, Model Based Design (MBD) is being imported in industrial automation from software engineering field. Another key-point in industrial automated systems is the growth of requirements in terms of availability, reliability and safety for technological systems. In other words, the control system should not only deal with the nominal behaviour, but should also deal with other important duties, such as diagnosis and faults isolations, recovery and safety management. Indeed, together with high performance, in complex systems fault occurrences increase. This is a consequence of the fact that, as it typically occurs in reliable mechatronic systems, in complex systems such as AMS, together with reliable mechanical elements, an increasing number of electronic devices are also present, that are more vulnerable by their own nature. The diagnosis problem and the faults isolation in a generic dynamical system consists in the design of an elaboration unit that, appropriately processing the inputs and outputs of the dynamical system, is also capable of detecting incipient faults on the plant devices, reconfiguring the control system so as to guarantee satisfactory performance. The designer should be able to formally verify the product, certifying that, in its final implementation, it will perform itsrequired function guarantying the desired level of reliability and safety; the next step is that of preventing faults and eventually reconfiguring the control system so that faults are tolerated. On this topic an important improvement to formal verification of logic control, fault diagnosis and fault tolerant control results derive from Discrete Event Systems theory. The aimof this work is to define a design pattern and a control architecture to help the designer of control logic in industrial automated systems. The work starts with a brief discussion on main characteristics and description of industrial automated systems on Chapter 1. In Chapter 2 a survey on the state of the software engineering paradigm applied to industrial automation is discussed. Chapter 3 presentes a architecture for industrial automated systems based on the new concept of Generalized Actuator showing its benefits, while in Chapter 4 this architecture is refined using a novel entity, the Generalized Device in order to have a better reusability and modularity of the control logic. In Chapter 5 a new approach will be present based on Discrete Event Systems for the problemof software formal verification and an active fault tolerant control architecture using online diagnostic. Finally conclusive remarks and some ideas on new directions to explore are given. In Appendix A are briefly reported some concepts and results about Discrete Event Systems which should help the reader in understanding some crucial points in chapter 5; while in Appendix B an overview on the experimental testbed of the Laboratory of Automation of University of Bologna, is reported to validated the approach presented in chapter 3, chapter 4 and chapter 5. In Appendix C some components model used in chapter 5 for formal verification are reported.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Nanotechnology entails the manufacturing and manipulation of matter at length scales ranging from single atoms to micron-sized objects. The ability to address properties on the biologically-relevant nanometer scale has made nanotechnology attractive for Nanomedicine. This is perceived as a great opportunity in healthcare especially in diagnostics, therapeutics and more in general to develop personalized medicine. Nanomedicine has the potential to enable early detection and prevention, and to improve diagnosis, mass screening, treatment and follow-up of many diseases. From the biological standpoint, nanomaterials match the typical size of naturally occurring functional units or components of living organisms and, for this reason, enable more effective interaction with biological systems. Nanomaterials have the potential to influence the functionality and cell fate in the regeneration of organs and tissues. To this aim, nanotechnology provides an arsenal of techniques for intervening, fabricate, and modulate the environment where cells live and function. Unconventional micro- and nano-fabrication techniques allow patterning biomolecules and biocompatible materials down to the level of a few nanometer feature size. Patterning is not simply a deterministic placement of a material; in a more extended acception it allows a controlled fabrication of structures and gradients of different nature. Gradients are emerging as one of the key factors guiding cell adhesion, proliferation, migration and even differentiation in the case of stem cells. The main goal of this thesis has been to devise a nanotechnology-based strategy and tools to spatially and temporally control biologically-relevant phenomena in-vitro which are important in some fields of medical research.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This thesis presents some different techniques designed to drive a swarm of robots in an a-priori unknown environment in order to move the group from a starting area to a final one avoiding obstacles. The presented techniques are based on two different theories used alone or in combination: Swarm Intelligence (SI) and Graph Theory. Both theories are based on the study of interactions between different entities (also called agents or units) in Multi- Agent Systems (MAS). The first one belongs to the Artificial Intelligence context and the second one to the Distributed Systems context. These theories, each one from its own point of view, exploit the emergent behaviour that comes from the interactive work of the entities, in order to achieve a common goal. The features of flexibility and adaptability of the swarm have been exploited with the aim to overcome and to minimize difficulties and problems that can affect one or more units of the group, having minimal impact to the whole group and to the common main target. Another aim of this work is to show the importance of the information shared between the units of the group, such as the communication topology, because it helps to maintain the environmental information, detected by each single agent, updated among the swarm. Swarm Intelligence has been applied to the presented technique, through the Particle Swarm Optimization algorithm (PSO), taking advantage of its features as a navigation system. The Graph Theory has been applied by exploiting Consensus and the application of the agreement protocol with the aim to maintain the units in a desired and controlled formation. This approach has been followed in order to conserve the power of PSO and to control part of its random behaviour with a distributed control algorithm like Consensus.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

In this thesis two approaches were applied to achieve a double general objective. The first chapter was dedicated to the study of the distribution of the expression of genes of several bitter and fat receptor in several gastrointestinal tracts. A set of 7 genes for bitter taste and for 3 genes for fat taste was amplified with real-time PCR from mRNA extracted from 5 gastrointestinal segments of weaned pigs. The presence of gene expression for several chemosensing receptors for bitter and fat taste in different compartments of the stomach confirms that this organ should be considered a player for the early detection of bolus composition. In the second chapter we investigated in young pigs the distribution of butyrate-sensing olfactory receptor (OR51E1) receptor along the GIT, its relation with some endocrine markers, its variation with age, and after interventions affecting the gut environment and intestinal microbiota in piglets and in different tissues. Our results indicate that OR51E1 is strictly related to the normal GIT enteroendocrine activity. In the third chapter we investigated the differential gene expression between oxyntic and pyloric mucosa in seven starter pigs. The obtained data indicate that there is significant differential gene exression between oxintic of the young pig and pyloric mucosa and further functional studies are needed to confirm their physiological importance. In the last chapter, thymol, that has been proposed as an oral alternative to antibiotics in the feed of pigs and broilers, was introduced directly into the stomach of 8 weaned pigs and sampled for gastric oxyntic and pyloric mucosa. The analysis of the whole transcript expression shoes that the stimulation of gastric proliferative activity and the control of digestive activity by thymol can influence positively gastric maturation and function in the weaned pigs.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Combined modality treatment (CMT) of chemotherapy followed by localized radiotherapy is standard treatment for patients with early stage Hodgkin's lymphoma. However, the role of radiotherapy has been questioned recently and some clinical study groups advocate chemotherapy only for this indication. We thus performed a systematic review with meta-analysis of randomized controlled trials comparing chemotherapy alone with CMT in patients with early stage Hodgkin's lymphoma with respect to response rate, tumor control and overall survival (OS). We searched Medline, EMBASE and the Cochrane Library as well as conference proceedings from January 1980 to February 2009 for randomized controlled trials comparing chemotherapy alone versus the same chemotherapy regimen plus radiotherapy. Progression free survival and similar outcomes were analyzed together as tumor control. Effect measures used were hazard ratios for OS and tumor control as well as relative risks for complete response (CR). Meta-analyses were performed using RevMan5. Five randomized controlled trials involving 1,245 patients were included. The hazard ratio (HR) was 0.41 (95% confidence interval (CI) 0.25 to 0.66) for tumor control and 0.40 (95% CI 0.27 to 0.59) for OS for patients receiving CMT compared to chemotherapy alone. CR rates were similar between treatment groups. In sensitivity analyses another 6 trials were included that did not fulfill the inclusion criteria of our protocol but were considered relevant to the topic. These trials underlined the results of the main analysis. In conclusion, adding radiotherapy to chemotherapy improves tumor control and OS in patients with early stage Hodgkin's lymphoma.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Restriction of proteins to discrete subcellular regions is a common mechanism to establish cellular asymmetries and depends on a coordinated program of mRNA localization and translation control. Many processes from the budding of a yeast to the establishment of metazoan embryonic axes and the migration of human neurons, depend on this type of cell polarization. How factors controlling transport and translation assemble to regulate at the same time the movement and translation of transported mRNAs, and whether these mechanisms are conserved across kingdoms is not yet entirely understood. In this review we will focus on some of the best characterized examples of mRNA transport machineries, the "yeast locasome" as an example of RNA transport and translation control in unicellular eukaryotes, and on the Drosophila Bic-D/Egl/Dyn RNA localization machinery as an example of RNA transport in higher eukaryotes. This focus is motivated by the relatively advanced knowledge about the proteins that connect the localizing mRNAs to the transport motors and the many well studied proteins involved in translational control of specific transcripts that are moved by these machineries. We will also discuss whether the core of these RNA transport machineries and factors regulating mRNA localization and translation are conserved across eukaryotes.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This report presents the research results of battery modeling and control for hybrid electric vehicles (HEV). The simulation study is conducted using plug-and-play powertrain and vehicle development software, Autonomie. The base vehicle model used for testing the performance of battery model and battery control strategy is the Prius MY04, a power-split hybrid electric vehicle model in Autonomie. To evaluate the battery performance for HEV applications, the Prius MY04 model and its powertrain energy flow in various vehicle operating modes are analyzed. The power outputs of the major powertrain components under different driving cycles are discussed with a focus on battery performance. The simulation results show that the vehicle fuel economy calculated by the Autonomie Prius MY04 model does not match very well with the official data provided by the department of energy (DOE). It is also found that the original battery model does not consider the impact of environmental temperature on battery cell capacities. To improve battery model, this study includes battery current loss on coulomb coefficient and the impact of environmental temperature on battery cell capacity in the model. In addition, voltage losses on both double layer effect and diffusion effect are included in the new battery model. The simulation results with new battery model show the reduced fuel economy error to the DOE data comparing with the original Autonomie Prius MY04 model.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

BACKGROUND: Interaction refers to the situation in which the effect of 1 exposure on an outcome differs across strata of another exposure. We did a survey of epidemiologic studies published in leading journals to examine how interaction is assessed and reported. METHODS: We selected 150 case-control and 75 cohort studies published between May 2001 and May 2007 in leading general medicine, epidemiology, and clinical specialist journals. Two reviewers independently extracted data on study characteristics. RESULTS: Of the 225 studies, 138 (61%) addressed interaction. Among these, 25 (18%) presented no data or only a P value or a statement of statistical significance; 40 (29%) presented stratum-specific effect estimates but no meaningful comparison of these estimates; and 58 (42%) presented stratum-specific estimates and appropriate tests for interaction. Fifteen articles (11%) presented the individual effects of both exposures and also their joint effect or a product term, providing sufficient information to interpret interaction on an additive and multiplicative scale. Reporting was poorest in articles published in clinical specialist articles and most adequate in articles published in general medicine journals, with epidemiology journals in an intermediate position. CONCLUSIONS: A majority of articles reporting cohort and case-control studies address possible interactions between exposures. However, in about half of these, the information provided was unsatisfactory, and only 1 in 10 studies reported data that allowed readers to interpret interaction effects on an additive and multiplicative scale.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

BACKGROUND: Clinical evidence suggests a link between vestibular dysfunctions and mood disorders. No study has yet investigated mood and affective control during vestibular stimulation in healthy participants. OBJECTIVE: We predicted a modulating effect of caloric vestibular stimulation (CVS) on affective control measured in an affective Go/NoGo task (AGN). METHODS: Thirty-two participants performed an AGN task while they were exposed to cold left or right ear CVS (20 °C) and sham stimulation (37 °C). In each block, either positive or negative pictures (taken from the International Affective Picture System) were defined as targets. Participants had to respond to targets (Go), and withhold responses to distractors (NoGo). RESULTS: The sensitivity index d' (hits - false alarms) was used to measure affective control. Affective control improved during right ear CVS when viewing positive stimuli (P = .005), but decreased during left ear CVS when compared to sham stimulation (P = .009). CVS had a similar effect on positive mood ratings (Positive and Negative Affect Schedule). Positive mood ratings decreased during left ear CVS when compared to sham stimulation, but there was no effect after right ear CVS. DISCUSSION: The results suggest that CVS, depending on side of stimulation, has a modulating effect on mood and affective control. The results complement previous findings in manic patients and provide new evidence for the clinical potential of CVS.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A common form of social regulation of an individual’s health behavior is social control. The contextual model of social control assumes that higher relationship quality goes along with more beneficial effects of social control on health behavior. This study examined potential differential moderating effects of different dimensions of relationship quality on the associations between positive and negative social control and smoking behavior and hiding smoking. The sample consisted of 144 smokers (n = 72 women; mean age = 31.78, SD = 10.04) with a nonsmoking partner. Positive and negative social control, dimensions of relationship quality consensus, cohesion and satisfaction, numbers of cigarettes smoked (NCS), hiding smoking (HS), and control variables were assessed at baseline. Four weeks later NCS and HS were assessed again. Only for smokers with high consensus, but not cohesion and satisfaction, a negative association between positive control and NCS emerged. Moreover, smokers with high consensus tended to report more HS when being positively and negatively socially controlled. This also emerged for cohesion and positive control. Satisfaction with the relationship did not display any interaction effects. This study’s results emphasize the importance of differentiating not only between positive and negative social control but also between different dimensions of relationship quality in order to gain a comprehensive understanding of the dynamics in romantic dyads with regard to social regulation of behavioral change.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Due to widespread development of anthelmintic resistance in equine parasites, recommendations for their control are currently undergoing marked changes with a shift of emphasis toward more coprological surveillance and reduced treatment intensity. Denmark was the first nation to introduce prescription-only restrictions of anthelmintic drugs in 1999, but other European countries have implemented similar legislations over recent years. A questionnaire survey was performed in 2008 among Danish horse owners to provide a current status of practices and perceptions with relation to parasite control. Questions aimed at describing the current use of coprological surveillance and resulting anthelmintic treatment intensities, evaluating knowledge and perceptions about the importance of various attributes of parasite control, and assessing respondents' willingness to pay for advice and parasite surveillance services from their veterinarians. A total of 1060 respondents completed the questionnaire. A large majority of respondents (71.9%) were familiar with the concept of selective therapy. Results illustrated that the respondents' self-evaluation of their knowledge about parasites and their control associated significantly with their level of interest in the topic and their type of education (P<0.0001). The large majority of respondents either dewormed their horses twice a year and/or performed two fecal egg counts per horse per year. This approach was almost equally pronounced in foals, horses aged 1-3 years old, and adult horses. The respondents rated prevention of parasitic disease and prevention of drug resistance as the most important attributes, while cost and frequent fecal testing were rated least important. Respondents' actual spending on parasite control per horse in the previous year correlated significantly with the amount they declared themselves willing to spend (P<0.0001). However, 44.4% declared themselves willing to pay more than what they were spending. Altogether, results indicate that respondents were generally familiar with equine parasites and the concept of selective therapy, although there was some confusion over the terms small and large strongyles. They used a large degree of fecal surveillance in all age groups, with a majority of respondents sampling and/or treating around twice a year. Finally, respondents appeared willing to spend money on parasite control for their horses. It is of concern that the survey suggested that foals and young horses are treated in a manner very similar to adult horses, which is against current recommendations. Thus, the survey illustrates the importance of clear communication of guidelines for equine parasite control.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The goal of the current investigation was to compare two monitoring processes (judgments of learning [JOLs] and confidence judgments [CJs]) and their corresponding control processes (allocation of study time and selection of answers to maximize accuracy, respectively) in 5- to 7-year-old children (N=101). Children learned the meaning of Japanese characters and provided JOLs after a study phase and CJs after a memory test. They were given the opportunity to control their learning in self-paced study phases, and to control their accuracy by placing correct answers into a treasure chest and incorrect answers into a trash can. All three age groups gave significantly higher CJs for correct compared to incorrect answers, with no age-related differences in the magnitude of this difference, suggesting robust metacognitive monitoring skills in children as young as 5. Furthermore, a link between JOLs and study time was found in the 6- and 7-year-olds, such that children spent more time studying items with low JOLs compared to items with high JOLs. Also, 6- and 7-year-olds but not 5-year-olds spent more time studying difficult items compared to easier items. Moreover, age-related improvements were found in children's use of CJs to guide their selection of answers: although children as young as 5 placed their most confident answers in the treasure chest and least confident answers in the trash can, this pattern was more robust in older children. Overall, results support the view that some metacognitive judgments may be acted upon with greater ease than others among young children.