Beel fishery and livelihood of the local community in Rajdhala, Netrakona, Bangladesh

Baseline survey and Participatory Rural Appraisal (PRA) during January 2003 to December 2004 on the fishing community revealed that unregulated fishing, use of destructive fishing gears, poaching of fishes, difficulties encountered in enforcing fisheries regulation and the helplessness of fishers to find alternative sources of income during banned fishing period (June to October) were the major management problems. CBFM (Community Based Fisheries Management) system as an alternative management strategy has been introduced to ensure active participation of the target group-the poor fishers living around the beet who were previously deprived to get access to the beet. Establishing a leasing system for controlled access, ensuring greater user-group participation through equitable distribution of all resource benefits among members, attempting to enforce penalties for illegal fishing linked with surprise checks to enforce management regulations are some of the recent steps taken by the BMC (Beel Management Committee). Chapila fish intake by the community was 31.25 g/head/day before stocking the beel by carp fingerlings. After stocking, they consumed chapila as fish protein from 8.33 g to 20.8 g/head/day during the fishing season (November to May) indicating that due to introduction of carp fingerlings, chapila production has been decreased in 2003-2004. About 77.5% families around the beel were found to be dependent directly and/or indirectly on chapila and other indigenous fishes of the beel for their livelihood, through fishing, marketing and other activities like net and boat preparation and nets mending etc. Particularly fishers' families were found to face serious problem during non-fishing period like June to October for their livelihood. Analyzing the present research result it was also observed that other than declination in biodiversity, the fishing pressure on promising chapila of the beel was found high and that is why the production of chapila has also been decreased. To get sustainable chapila production from the heel, it is suggested to ensure successful spawning and recruitment as juveniles, and hence the chapila should be undisturbed during its breeding period from March to July, and fishing pressure on the same species needs to be reduced for obtaining sustainable fish production.

Social sensing in the field: Challenges in detecting social interactions in construction sites

Construction industry is a sector that is renowned for the slow uptake of new technologies. This is usually due to the conservative nature of this sector that relies heavily on tried and tested and successful old business practices. However, there is an eagerness in this industry to adopt Building Information Modelling (BIM) technologies to capture and record accurate information about a building project. But vast amounts of information and knowledge about the construction process is typically hidden within informal social interactions that take place in the work environment. In this paper we present a vision where smartphones and tablet devices carried by construction workers are used to capture the interaction and communication between workers in the field. Informal chats about decisions taken in the field, impromptu formation of teams, identification of key persons for certain tasks, and tracking the flow of information across the project community, are some pieces of information that could be captured by employing social sensing in the field. This information can not only be used during the construction to improve the site processes but it can also be exploited by the end user during maintenance of the building. We highlight the challenges that need to be overcome for this mobile and social sensing system to become a reality. © 2012 ACM.

An approach to multi-fidelity optimization of aeroengine compression systems

The aerodynamic design of turbomachinery presents the design optimisation community with a number of exquisite challenges. Chief among these are the size of the design space and the extent of discontinuity therein. This discontinuity can serve to limit the full exploitation of high-fidelity computational fluid dynamics (CFD): such codes require detailed geometric information often available only sometime after the basic configuration of the machine has been set by other means. The premise of this paper is that it should be possible to produce higher performing designs in less time by exploiting multi-fidelity techniques to effectively harness CFD earlier in the design process, specifically by facilitating its participation in configuration selection. The adopted strategy of local multi-fidelity correction, generated on demand, combined with a global search algorithm via an adaptive trust region is first tested on a modest, smooth external aerodynamic problem. Speed-up of an order of magnitude is demonstrated, comparable to established techniques applied to smooth problems. A number of enhancements aimed principally at effectively evaluating a wide range of configurations quickly is then applied to the basic strategy, and the emerging technique is tested on a generic aeroengine core compression system. A similar order of magnitude speed-up is achieved on this relatively large and highly discontinuous problem. A five-fold increase in the number of configurations assessed with CFD is observed. As the technique places constraints neither on the underlying physical modelling of the constituent analysis codes nor on first-order agreement between those codes, it has potential applicability to a range of multidisciplinary design challenges. © 2012 by Jerome Jarrett and Tiziano Ghisu.

Achievements and challenges in machine vision-based inspection of large concrete structures

Large concrete structures need to be inspected in order to assess their current physical and functional state, to predict future conditions, to support investment planning and decision making, and to allocate limited maintenance and rehabilitation resources. Current procedures in condition and safety assessment of large concrete structures are performed manually leading to subjective and unreliable results, costly and time-consuming data collection, and safety issues. To address these limitations, automated machine vision-based inspection procedures have increasingly been proposed by the research community. This paper presents current achievements and open challenges in vision-based inspection of large concrete structures. First, the general concept of Building Information Modeling is introduced. Then, vision-based 3D reconstruction and as-built spatial modeling of concrete civil infrastructure are presented. Following that, the focus is set on structural member recognition as well as on concrete damage detection and assessment exemplified for concrete columns. Although some challenges are still under investigation, it can be concluded that vision-based inspection methods have significantly improved over the last 10 years, and now, as-built spatial modeling as well as damage detection and assessment of large concrete structures have the potential to be fully automated.

Soil microbial community analysis using denaturing gradient gel electrophoresis

The most biological diversity on this planet is probably harbored in soils. Understanding the diversity and function of the microbiological component of soil poses great challenges that are being overcome by the application of molecular biological approaches. This review covers one of many approaches being used: separation of polymerase chain reaction (PCR) amplicons using denaturing gradient gel electrophoresis (DGGE). Extraction of nucleic acids directly from soils allows the examination of a community without the limitation posed by cultivation. Polymerase chain reaction provides a means to increase the numbers of a target for its detection on gels. Using the rRNA genes as a target for PCR provides phylogenetic information on populations comprising communities. Fingerprints produced by this method have allowed spatial and temporal comparisons of soil communities within and between locations or among treatments. Numerous samples can be compared because of the rapid high throughput nature of this method. Scientists now have the means to begin addressing complex ecological questions about the spatial, temporal, and nutritional interactions faced by microbes in the soil environment.

Computer-Mediated Communication and Ecclesiological Challenges To and From the Reformed Tradition

Communities of faith have appeared online since the inception of computer -­ mediated communication (CMC)and are now ubiquitous. Yet the character and legitimacy of Internet communities as ecclesial bodies is often disputed by traditional churches; and the Internet's ability to host the church as church for online Christians remains a question. This dissertation carries out a practical theological conversation between three main sources: the phenomenon of the church online; ecclesiology (especially that characteristic of Reformed communities); and communication theory. After establishing the need for this study in Chapter 1, Chapter 2 investigates the online presence of Christians and trends in their Internet use, including its history and current expressions. Chapter 3 sets out an historical overview of the Reformed Tradition, focusing on the work of John Calvin and Karl Barth, as well as more contemporary theologians. With a theological context in which to consider online churches in place, Chapter 4 introduces four theological themes prominent in both ecclesiology and CMC studies: authority; community; mediation; and embodiment. These themes constitute the primary lens through which the dissertation conducts a critical-­confessional interface between communication theory and ecclesiology in the examination of CMC. Chapter 5 continues the contextualization of online churches with consideration of communication theories that impact CMC, focusing on three major communication theories: Narrative Theory; Interpretive Theory; and Speech Act Theory. Chapter 6 contains the critical conversation between ecclesiology and communication theory by correlating the aforementioned communication theories with Narrative Theology, Communities of Practice, and Theo-­Drama, and applying these to the four theological themes noted above. In addition, new or anticipated developments in CMC investigated in relationship to traditional ecclesiologies and the prospect of cyber-­ecclesiology. Chapter 7 offers an evaluative tool consisting of a three-­step hermeneutical process that examines: 1) the history, tradition, and ecclesiology of the particular community being evaluated; 2) communication theories and the process of religious-­social shaping of technology; and 3) CMC criteria for establishing the presence of a stable, interactive, and relational community. As this hermeneutical process unfolds, it holds the church at the center of the process, seeking a contextual yet faithful understanding of the church.

Revisiting Irish poetic modernisms

This thesis discusses Irish Modernist poetry written between 1905 and 1970, specifically the poetry of Joseph Campbell (1879-1944), Thomas MacGreevy (1893-1967), Denis Devlin (1908-1959) and Brian Coffey (1905-1995). All four poets have been largely neglected in criticism until a growth of interest encouraged by Michael Smith and Trevor Joyce’s New Writers’ Press during the 1970s. J.C.C. Mays, Stan Smith, Susan Schreibman, Terence Brown, Patricia Coughlan and Alex Davis published subsequent critical support during the ‘80s and ‘90s. My research aims to highlight poetry previously omitted from the canon of Irish literature, those with connections to British or continental European literary movements as well as poetry by women writers and writers from the North. Part of this exploration of Irish Poetic Modernisms involves an investigation of intersections between poetic modernisms and Irish war poetry and of depictions of Irish masculinity in the poetry of Devlin and Coffey. My discussion of Campbell’s poetry focuses on links between the early regional modernism of his poetry and later Irish modernist poetry, including his participation in the Ulster Literary Theatre, with the Literary Revival community in Dublin and his association with the proto-Imagist movement in London. My examination of connections between Irish war poetry and Irish modernism allows me to discuss the writing of several underrecognized Irish poets who are contemporaries and near contemporaries of the main subjects of my thesis. Thomas MacGreevy’s poetry is the most clear case study of the links between Irish modernist poetry and poetry about Ireland’s participation in the Great War. MacGreevy’s writing reveals his multiple allegiances: he both elegizes and challenges the increasing cultural inhibitions of Free State Ireland. Denis Devlin’s poetic portrayals of Ireland reveal his rejection both of the Literary Revival’s fascination with Celticism and of Dublin’s literary community while upholding tradition poetic gender roles. My research explores representations of masculinity and Irish politics, including heroic masculine imagery, in the long poems of Devlin and Coffey. My discussion of Brian Coffey considers the importance of the figure of the “poet as maker” to his writing and his relationship with Ireland during his long writing career. I also consider his role as the editor and executor of Devlin’s literary estate and the impact that had on both the latter’s posthumous reputation and Coffey’s later writing.

Lack of cross-scale linkages reduces robustness of community-based fisheries management.

Community-based management and the establishment of marine reserves have been advocated worldwide as means to overcome overexploitation of fisheries. Yet, researchers and managers are divided regarding the effectiveness of these measures. The "tragedy of the commons" model is often accepted as a universal paradigm, which assumes that unless managed by the State or privatized, common-pool resources are inevitably overexploited due to conflicts between the self-interest of individuals and the goals of a group as a whole. Under this paradigm, the emergence and maintenance of effective community-based efforts that include cooperative risky decisions as the establishment of marine reserves could not occur. In this paper, we question these assumptions and show that outcomes of commons dilemmas can be complex and scale-dependent. We studied the evolution and effectiveness of a community-based management effort to establish, monitor, and enforce a marine reserve network in the Gulf of California, Mexico. Our findings build on social and ecological research before (1997-2001), during (2002) and after (2003-2004) the establishment of marine reserves, which included participant observation in >100 fishing trips and meetings, interviews, as well as fishery dependent and independent monitoring. We found that locally crafted and enforced harvesting rules led to a rapid increase in resource abundance. Nevertheless, news about this increase spread quickly at a regional scale, resulting in poaching from outsiders and a subsequent rapid cascading effect on fishing resources and locally-designed rule compliance. We show that cooperation for management of common-pool fisheries, in which marine reserves form a core component of the system, can emerge, evolve rapidly, and be effective at a local scale even in recently organized fisheries. Stakeholder participation in monitoring, where there is a rapid feedback of the systems response, can play a key role in reinforcing cooperation. However, without cross-scale linkages with higher levels of governance, increase of local fishery stocks may attract outsiders who, if not restricted, will overharvest and threaten local governance. Fishers and fishing communities require incentives to maintain their management efforts. Rewarding local effective management with formal cross-scale governance recognition and support can generate these incentives.

Ethics Standards (HRPP) and Public Partnership (PARTAKE) to Address Clinical Research Concerns in India: Moving Toward Ethical, Responsible, Culturally Sensitive, and Community-Engaging Clinical Research.

Like other emerging economies, India's quest for independent, evidence-based, and affordable healthcare has led to robust and promising growth in the clinical research sector, with a compound annual growth rate (CAGR) of 20.4% between 2005 and 2010. However, while the fundamental drivers and strengths are still strong, the past few years witnessed a declining trend (CAGR -16.7%) amid regulatory concerns, activist protests, and sponsor departure. And although India accounts for 17.5% of the world's population, it currently conducts only 1% of clinical trials. Indian and international experts and public stakeholders gathered for a 2-day conference in June 2013 in New Delhi to discuss the challenges facing clinical research in India and to explore solutions. The main themes discussed were ethical standards, regulatory oversight, and partnerships with public stakeholders. The meeting was a collaboration of AAHRPP (Association for the Accreditation of Human Research Protection Programs)-aimed at establishing responsible and ethical clinical research standards-and PARTAKE (Public Awareness of Research for Therapeutic Advancements through Knowledge and Empowerment)-aimed at informing and engaging the public in clinical research. The present article covers recent clinical research developments in India as well as associated expectations, challenges, and suggestions for future directions. AAHRPP and PARTAKE provide etiologically based solutions to protect, inform, and engage the public and medical research sponsors.

Clinical Research Environment in India: Challenges and Proposed Solutions.

India has compelling need and keen aspirations for indigenous clinical research. Notwithstanding this need and previously reported growth the expected expansion of Indian clinical research has not materialized. We reviewed the scientific literature, lay press reports, and ClinicalTrials.gov data for information and commentary on projections, progress, and impediments associated with clinical trials in India. We also propose targeted solutions to identified challenges. The Indian clinical trial sector grew by (+) 20.3% CAGR (compound annual growth rate) between 2005 and 2010 and contracted by (-) 14.6% CAGR between 2010 and 2013. Phase-1 trials grew by (+) 43.5% CAGR from 2005-2013, phase-2 trials grew by (+) 19.8% CAGR from 2005-2009 and contracted by (-) 12.6% CAGR from 2009-2013, and phase-3 trials grew by (+) 13.0% CAGR from 2005-2010 and contracted by (-) 28.8% CAGR from 2010-2013. This was associated with a slowing of the regulatory approval process, increased media coverage and activist engagement, and accelerated development of regulatory guidelines and recuperative initiatives. We propose the following as potential targets for restorative interventions: Regulatory overhaul (leadership and enforcement of regulations, resolution of ambiguity in regulations, staffing, training, guidelines, and ethical principles [e.g., compensation]).Education and training of research professionals, clinicians, and regulators.Public awareness and empowerment. After a peak in 2009-2010, the clinical research sector in India appears to be experiencing a contraction. There are indications of challenges in regulatory enforcement of guidelines; training of clinical research professionals; and awareness, participation, partnership, and the general image amongst the non-professional media and public. Preventative and corrective principles and interventions are outlined with the goal of realizing the clinical research potential in India.

Design and modeling challenges for high density packaging

Today most of the IC and board designs are undertaken using two-dimensional graphics tools and rule checks. System-in-package is driving three-dimensional design concepts and this is posing a number of challenges for electronic design automation (EDA) software vendors. System-in-package requires three-dimensional EDA tools and design collaboration systems with appropriate manufacturing and assembly rules for these expanding technologies. Simulation and Analysis tools today focus on one aspect of the design requirement, for example, thermal, electrical or mechanical. System-in-Package requires analysis and simulation tools that can easily capture the complex three dimensional structures and provided integrated fast solutions to issues such as thermal management, reliability, electromagnetic interference, etc. This paper discusses some of the challenges faced by the design and analysis community in providing appropriate tools to engineers for System-in-Package design

Multi-physics modelling for microelectronics and microsystems - current capabilities and future challenges

At present the vast majority of Computer-Aided- Engineering (CAE) analysis calculations for microelectronic and microsystems technologies are undertaken using software tools that focus on single aspects of the physics taking place. For example, the design engineer may use one code to predict the airflow and thermal behavior of an electronic package, then another code to predict the stress in solder joints, and then yet another code to predict electromagnetic radiation throughout the system. The reason for this focus of mesh-based codes on separate parts of the governing physics is essentially due to the numerical technologies used to solve the partial differential equations, combined with the subsequent heritage structure in the software codes. Using different software tools, that each requires model build and meshing, leads to a large investment in time, and hence cost, to undertake each of the simulations. During the last ten years there has been significant developments in the modelling community around multi- physics analysis. These developments are being followed by many of the code vendors who are now providing multi-physics capabilities in their software tools. This paper illustrates current capabilities of multi-physics technology and highlights some of the future challenges

The food multimix concept: new innovative approach to meeting nutritional challenges in Sub-Saharan Africa

Food insecurity, chronic hunger, starvation and malnutrition continue to affect millions of individuals throughout the developing world, especially Sub-Saharan Africa. Various initiatives by African governments and International Agencies such as the UN, the industrial nations, the International Monetary Fund, the World Bank and the World Trade Organisation to boost economic development, have failed to provide the much-needed solution to these challenges. The impact of these economic shifts and the failures of structural adjustment programmes on the nutritional well-being and health of the most vulnerable members of poor communities cannot be over-emphasised. The use of ad hoc measures as an adjunct to community-based rural integrated projects have provided little success and will be unsustainable unless they are linked to harnessing available local resources. The present paper therefore focuses on exploring alternative ways of harnessing the scant agricultural resources by employing a scientific approach to food-related problem-solving. The food multimix (FMM) concept offers a scientific contribution alongside other attempts currently in use by the World Food Programme, WHO and FAO to meet the food insecurity challenges that confront most of the developing world in the twenty-first century. It is an innovative approach that makes better use of traditional food sources as a tool for meeting community nutritional needs. The FMM concept employs a food-based approach using traditional methods of food preparation and locally-available, cheap and affordable staples (fruits, pulses, vegetables and legumes) in the formulation of nutrient-enriched multimixes. Developed recipes can provide >= 40% of the daily nutritional requirements of vulnerable groups, including patients with HIV/AIDS and children undergoing nutrition rehabilitation. The FMM approach can also be used as a medium- to long-term adjunct to community-based rural integration projects aimed at health improvement and economic empowerment in Sub-Saharan Africa.

Challenges in integrative approaches to modelling the marine ecosystems of the North Atlantic: Physics to fish and coasts to ocean

It has long been recognised that there are strong interactions and feedbacks between climate, upper ocean biogeochemistry and marine food webs, and also that food web structure and phytoplankton community distribution are important determinants of variability in carbon production and export from the euphotic zone. Numerical models provide a vital tool to explore these interactions, given their capability to investigate multiple connected components of the system and the sensitivity to multiple drivers, including potential future conditions. A major driver for ecosystem model development is the demand for quantitative tools to support ecosystem-based management initiatives. The purpose of this paper is to review approaches to the modelling of marine ecosystems with a focus on the North Atlantic Ocean and its adjacent shelf seas, and to highlight the challenges they face and suggest ways forward. We consider the state of the art in simulating oceans and shelf sea physics, planktonic and higher trophic level ecosystems, and look towards building an integrative approach with these existing tools. We note how the different approaches have evolved historically and that many of the previous obstacles to harmonisation may no longer be present. We illustrate this with examples from the on-going and planned modelling effort in the Integrative Modelling Work Package of the EURO-BASIN programme.

Can benthic community structure be used to predict the process of bioturbation in real ecosystems

Disentangling the roles of environmental change and natural environmental variability on biologically mediated ecosystem processes is paramount to predict future marine ecosystem functioning. Bioturbation, the biogenic mixing of sediments, has a regulating role in marine biogeochemical processes. However, our understanding of bioturbation as a community level process and of its environmental drivers is still limited by loose use of terminology, and a lack of consensus about what bioturbation is. To help resolve these challenges, this empirical study investigated the links between four different attributes of bioturbation (bioturbation depth, activity and distance, and biodiffusive transport); the ability of an index of bioturbation (BPc) to predict each of them; and their relation to seasonality, in a shallow coastal system – the Western Channel Observatory, UK. Bioturbation distance depended on changes in benthic community structure, while the other three attributes were more directly influenced by seasonality in food availability. In parallel, BPc successfully predicted bioturbation distance but not the other attributes of bioturbation. This study therefore highlights that community bioturbation results from this combination of processes responding to environmental variability at different time-scales. However, community level measurements of bioturbation across environmental variability are still scarce, and BPc is calculated using commonly available data on benthic community structure and the functional classification of invertebrates. Therefore, BPc could be used to support the growth of landscape scale bioturbation research, but future uses of the index need to consider which bioturbation attributes the index actually predicts. As BPc predicts bioturbation distance, estimated here using a random-walk model applicable to community settings, studies using either of the metrics should be directly comparable and contribute to a more integrated future for bioturbation research.