Physical water column observations during summer breeze winds

During summer seasons (from 2012 to 2015) high resolution observation were performed in the Civitavecchia coastal area (Northern Tyrrhenian sea, west coast). All sampling was carried out from a small boat (5m rigid inflatable) starting in the early morning typically around 06:00 a.m. , and lasting from 2 to 8 h, depending on the weather conditions. The purposes of the experiment was to observe the variations of both the coastal circulation and the water column in response to rotation of 180 ° in the wind direction. During surveys both current measurements and yo-yo time series were performed. Current data were acquired using an ADCP SonTeck (500 Khz, sampling interval from 20sec to 60 sec, average interval 50% sampling, cell thickness 1 meter) and the yo-yo time series employing a small instrument package (CTD). The CTD contained an Idronaut 316 Plus and a SeaPoint fluorometer. The sampling rate for the CTD was 10Hz, profiling with the CTD was done by allowing the instrument package to free-fall, at an average descent rate of 1 m/s. During the summer 2012, the sampling plan consisted in four stations spaced a quarter of a mile (St. 1 - 10 m; St. 2 - 20 m; St. 3 - 30 m; and St. 4 - 40 m), in which yo-yo time series were performed with an interval of 20 min. In order to study fluorescence of Chlorophyll a pathes distribution in coastal zone. Breeze induced circulation was the goal of the following summers surveys, in these current measurements and yo-yo time series were performed moored at a depth of 40 m. Offshore station (St. 1 -40m) has been chosen to perform measurement, basis of previously observations (2012 sampling surveys). It was decided as wind driven circulation and mixing phenomena are less influenced by seabed than the other stations. Acquired data have been processed by NEMO SeaDataNet software.

Numerical and Experimental Studies of Sail Aerodynamics

The purpose of this investigation was the determination of the aerodynamic performance of sails and gain knowledge of the phenomena involved in order to improve the aerody¬namic characteristics. In this research, the airflow around different sails in four scenarios was studied. The method to analyze these scenarios was the combination of numerical simulations and experimental tests by taking advantage of the best of each tool. Two different Com¬putational Fluid Dynamic codes were utilized: the ANSYS-CFX and the CD-Adapco’s STAR-CCM+. The experimental tests were conducted in the Atmospheric Boundary Layer Wind Tunnel at the Universidad de Granada (Spain), the Twisted Flow Wind Tunnel at the University of Auckland (New Zealand) and the A9 Wind Tunnel at the Universidad Polit´ecnica de Madrid (Spain). Through this research, it was found the three-dimensional effect of the mast on the aerodynamic performance of an IMS Class boat. The pressure distribution on a Transpac 52 Class mainsail was also determined. Moreover, the aerodynamic perfor¬mance of the 43ft and 60ft Dhow Classes was obtained. Finally, a feasibility study was conducted to use a structural wing in combination with conventional propulsions systems. The main conclusion was that this research clarified gaps on the knowledge of the aerodynamic performance of sails. Moreover, since commercial codes were not specifically designed to study sails, a procedure was developed. On the other hand, innovative experimental techniques were used and applied to model-scale sails. The achievements of this thesis are promising and some of the results are already in use by the industry on a daily basis. El propósito de este estudio era determinar el comportamiento aerodinámico de unas velas y mejorar el conocimiento de los fenómenos que suceden para optimizar las características aerodinámicas de dichas velas. En esta investigación se estudió el flujo de aire alrededor de diferentes velas en cuatro escenarios. El método para analizar estos escenarios fue la combinación de simulaciones numéricas y ensayos experimentales mediante el aprovechamiento de las ventajas de cada herramienta. Se utilizaron dos códigos de dinámica de fluidos computacional: el ANSYS-CFX y el STAR-CCM+ de la empresa CD-Adapco. Los ensayos experimentales se desarrollaron en el túnel de viento de capa límite de la Universidad de Granada (España), el túnel de viento de la Universidad de Auckland (Nueva Zelanda) y en el túnel A9 de la Universidad Politécnica de Madrid (España). Mediante esta investigación, se determinó el efecto tridimensional del mástil en un velero de la clase IMS. También se describió la distribución de presiones sobre una mayor de un Transpac 52. Además, se obtuvo el comportamiento aerodinámico de las clases 43ft y 60ft de los veleros Dhows. Finalmente, se llevó a cabo un estudio de viabilidad de la utilización de un ala estructural en combinación con sistemas de propulsión convencionales. La conclusión principal de esta investigación fue la capacidad de explicar ciertas lagunas en el conocimiento del comportamiento aerodinámico de las velas en diferentes escenarios. Además, dado que los códigos comerciales no están específicamente diseñados para el estudio de velas, se desarrolló un procedimiento a tal efecto. Por otro lado, se han utilizado innovadoras técnicas experimentales y se han aplicado a modelos de velas a escala. Los logros de esta investigación son prometedores y algunos de los resultados obtenidos ya están siendo utilizados por la industria en su día a día.

Desarrollo aplicación web y móvil para reservas en comedores

Este trabajo trata sobre el desarrollo de una “Start Up” de base tecnológica desde la universidad. La empresa creada comercializará un servicio software para comedores y restaurantes. La actualidad está marcada por la economía, y en estos momentos nos encontramos con una tasa de paro general del 26,7%, en ingenierías (la UPM) es del 31,2%. El sector de las TIC se salva por el momento (en informática la tasa de paro es del 4,8%), aunque el trabajo en muchos casos es precario y las oportunidades para desarrollar una carrera plena pasan por ir a trabajar a otros países que tienen una situación laboral más favorable. También tenemos la alternativa de trabajar como autónomos, creando empresas y, con suerte, generando un nuevo empleo. En España existen iniciativas de ayuda pública y privada que ayudan a convertir ideas en empresas, incubadoras, aceleradoras, ayudas públicas, ferias tecnológicas, concursos que ayudan a ganar visibilidad, etc. Este proyecto nació gracias a una de estas iniciativas, más en concreto a ACTUA UPM, iniciativa de la propia UPM a través de la unidad Creación de Empresas. Para crear una empresa no basta un buen servicio o un buen producto, es necesario poder venderlo. Por lo que el primer esfuerzo debe realizarse en comprobar que nuestro producto tiene características que pueden cubrir una necesidad que ya existe y que las condiciones indican que puede ser rentable. Esta es la primera fase, la creación de un plan de negocio y de marketing. A continuación basándonos en la manera en la que decidimos que venderemos nuestro producto, orientaremos el desarrollo para hacer hincapié en los puntos fuertes que pueden hacer nuestro producto diferente y deseado. La fase de desarrollo es mi caso es sobre todo una fase de aprendizaje, en la que aprenderé a fondo tecnologías web y móvil, y aplicaré los conocimientos adquiridos en mis estudios. A continuación, se ofrece mi experiencia desarrollando la empresa desde la idea hasta conseguir un producto preparado para ponerlo a prueba. ---ABSTRACT---This paper is about the development of a technological based “Start Up” from the college. The company will market a software service oriented to canteens and restaurants. Economy is what rules the world, and today we are facing a very strong crisis with a 26.7% of unemployment rate in Spain. However, the IT sector is less affected than others by this crisis (Informatics Engineers has a 4.8% unemployment rate). But in many cases jobs are precarious and young people have to leave our country for pursuing a decent career. Also we have the option of self-employment, launching a company, and with some luck, creating a new job. We have some tools for launching new technological base business. Many people hopes to create the new Facebook, and many investors are interested in being on the boat if that happens. Also at UPM we have ACTUA UPM, which promotes ideas into companies. My idea was born in it and managed to the final round. For launching a new company you need to do a business plan that studies the possible pitfalls of your idea and directs your development efforts to the way your product is going to be sold. So the first phase of this paper will talk about the development of the business plan. After it, the development phase is in essence a phase of learning in which I faced most problems in my own, giving the best solutions I could from my own experience and intuition. Then, we present the experience of developing a Start Up from the idea to the market testing.

SM Offices, Boadilla del Monte, Madrid (Spain) 2003

Like a lying steel giant. Like a train, like a boat. A building with a metal skin on the edge of the highway. = Como un gigante de acero tumbado. Como un tren, como un barco. Un edificio de piel metálica al borde de la carretera.

An analysis of installation of submarine pipelines

There are different methods of construction of outfall pipelines, all of them have to solve the problem of placing a tube over a known location in sea bed. This process has sometimes to be done in difficult conditions as waves, current or depths greater than 30 metres, where a diver cannot go safely beyond. Also the placement of the pipeline must be carried out without any damage to the tube, therefore a close control of the deflections and stresses in the structure must be performed. The importance of this control should be not diminished because a damage during the construction would imply a very difficult and expensive repair, that should be avoided with a proper design of the construction process. This paper is focused in the analysis of the tube during its placement according to a very well known construction method consisting in placing the tube from a boat, where all the connections between consecutive tube segments are performed, and also the whole process is controlled. This method is used for outfall as well as offshore pipelines, and it will be described in Section 2

Proyecto y lugar en la arquitectura doméstica de Jørn Utzon

En medio de un bosque danés, de altos arboles que se mueven al fuerte viento nórdico bajo el débil sol de las latitudes altas, y cargado de unos cuantos tableros de madera que consiguió de una exposición ya terminada, realizó Utzon su maqueta a escala real de su primera casa familiar en Hellebæk (1950-52) a la edad de treinta y dos años. De la misma manera que el pintor William Turner necesitó atarse a lo alto de un mástil de un barco, para vivir en directo una de las muchas tormentas que tantas y tantas veces había pintado en sus cuadros, el joven Utzon consideró indispensable introducirse dentro de la maqueta de su propia casa antes de construirla, para valorar in situ las potencialidades de aquel proyecto en relación al lugar. La obra de Jørn Utzon (1918-2008) es una arquitectura expectante y atenta del lugar donde se ubica. Jørn Utzon es un arquitecto de origen nórdico, que descubre su verdadera idiosincrasia en la cultura mediterránea, cultura en la que reside durante casi la mitad de toda su vida. Esta tesis se ha centrado en analizar exhaustivamente la relación de su arquitectura doméstica con el lugar donde se halla. Aspecto tan citado en la bibliografía existente de su obra, aunque nunca desarrollado de manera exhaustiva. El objetivo del análisis ha sido intentar encontrar invariantes o patrones que pudieran subyacer en su obra residencial en relación a ese tema. Para dicho análisis, se ha tomado una muestra suficientemente amplia de veinte viviendas o conjuntos residenciales (entre ellas sus cuatro viviendas familiares proyectadas), repartidas por cinco países (Suecia, Dinamarca, Reino Unido, España y Nueva Gales del Sur), que constituyen la tercera parte de su obra doméstica y la mitad de su obra construida residencial, así como las citas explícitas del autor sobre este tema en su obra escrita, y los planos o croquis de su obra gráfica. Como metodología de trabajo se ha recurrido a la consulta de las fuentes primarias: viajando y conociendo in-situ las casas seleccionadas en Dinamarca, Suecia, España y Australia; viviendo un mes en una de las casas (Can Lis) gracias a una beca del Gobierno danés y la Utzon Foundation; y realizando entrevistas a las personas que más cerca estuvieron del arquitecto en su entorno familiar y profesional. Asimismo, también se ha publicado parte de su contenido en medios internacionales: 4th International Utzon Symposium (7/3/2013-9/3/2014) y la página web oficial de Can Lis dependiente de la Utzon Foundation (www.canlis.dk). Las doce invariantes encontradas en relación al proyecto y lugar en los proyectos seleccionados, han sido agrupadas en torno a tres grandes elementos sobre los que Utzon constantemente reflexiona en sus escritos propios: horizonte, sol y material autóctono. Elementos que tienen su origen en la influencia que la navegación tuvo en su vida, y en su carácter espiritual y austero en lo material. La historia de Utzon es la de un nórdico, de vocación navegante, que encuentra su lugar en la cultura mediterránea, rodeado entre piedras de Marés, mientras divisa en silencio el horizonte marino en el umbral entre luz y sombra. ABSTRACT In the middle of a Danish forest, with high trees which move with the Nordic wind under the weak sun of high latitudes, and with the help of some wooden canvases acquired from an already completed exhibition, Jørn Utzon built a real-scale model of his first family house in Hellebæk (1950-52) at the age of thirty-two. In the same way that William Turner needed to be tied up on the top of a boat flagpole in order to have a first-hand experience of one of the many storms that he had depicted in his paintings so many times before, the young Utzon thought it was crucial to go into the model of his own house before building it, to evaluate in situ the potential of that project in relation to the place. Utzon’s work is architecture interested in and attentive of the place where it is situated. Jørn Utzon (1918-2008) is an architect of Nordic origin who discovered his own idiosyncrasy in the Mediterranean culture, in which he resided for half of his live. This thesis has focused on an exhaustive analysis of the relation between his domestic architecture and the place where it is located. This issue has been often cited in the existing bibliography, although it has never been exhaustively developed. The analysis objective has been to attempt to find invariants and patterns that could exist in his domestic work in relation to this subject. For this analysis, a sufficiently large sample has been selected: twenty houses or housing complexes (among others his own four family houses), distributed in five countries (Sweden, Denmark, United Kingdom, Spain and New South Wales), which constitute the third part of his domestic work, and half of his residential constructed projects, as well as Utzon’s written texts about this theme, and the drawings and sketches of his graphic work. The methodology used was based on consultation of primary sources: travelling and examining in situ the selected houses in Denmark, Sweden, Spain and Australia; living for a month in one of the houses (Can Lis) thanks to a research grant from the Danish Government and the Utzon Foundation; and interviewing people from his closest family and professional circles. Furthermore, part of the thesis has been published in international media: 4th International Utzon Symposium (7/3/2013-9/3/2014) and on the official web site of Can Lis, an Utzon Foundation subsidiary(www.canlis.dk). The twelve invariants discovered in relation to the project and the location of the selected projects, have been grouped according to three elements which Utzon continuously reflects upon in his own writings: the horizon, the sun and autochthonous material. Elements which originate from the influence that navigation had in his life, and from his spiritual and austere character. The story of Utzon is that of a Nordic person, with the vocation of a navigator, who found his place in the Mediterranean culture, surrounded with Marés stones, while silently making out the sea horizon on the threshold between light and shadow.

La transformación de la morada: una investigación sobre los invariantes arquitectónicos en la vivienda contemporánea

Le Corbusier denominó la nueva casa como la "machine à habiter / máquina de habitar", adaptándola a la revolución industrial que desde el inicio del siglo XX estaba cambiando el mundo. La casa, entendida como una máquina, sería un objeto útil, fabricado mediante el ensamblaje de piezas industrializadas al igual que un coche, un avión o un barco. Pero más adelante, en el prólogo del libro ‘Precisiones’, titulado ‘Prólogo americano’. Le Corbusier traslada sus ideas después del viaje a las Américas, escritas en el barco de regreso a Europa y en ellas encontramos la prueba más evidente de que algo está cambiando en él. En este nuevo enfoque contribuyen probablemente muchas cosas, tal vez algunas nunca lleguemos a saberlas, pero entre las que con toda probabilidad lo hacen de forma decisiva, están algunos de sus viajes. Norte de África, España o América del Sur. En los suburbios de Buenos Aires o en Río, llenos de casas hechas de plancha ondulada, sin corazón y sin alma, y que, a pesar de todo, tienen uno y otra; Le Corbusier recibe una lección de arquitectura que nunca olvidará y que le llevará a decir: “he visto una vivienda obrera de plancha ondulada, pero muy bien puesta, en la cual un rosal adornaba la puerta. Era todo un poema de los tiempos modernos” O bien “busco con verdadero afán esas casas que son casas de hombres y no casas de arquitectos". Al final de su vida, libre de un compromiso político o de una atadura excesivamente estricta con la construcción; sus propuestas son más orgánicas y no tan estructurales, basta ver la Cabanon que se construye para él y su mujer. En este trabajo; iniciado sobre la base de la conferencia que Martin Heidegger pronuncia el 5 de agosto de 1951 en Darmstadt, “Bauen Wohnen Denken”, apoyándose en el escrito de Santa Teresa de Cepeda (1515-1582), y guiados por sus siete Moradas del “Castillo Interior”, escrito del año 1577; se estudia la transformación de la casa y la invariancia de la morada. La casa posee uno de los mayores poderes de integración para los pensamientos, los recuerdos y los sueños del hombre. La casa en la vida del hombre, suplanta contingencias, multiplica sus consejos de continuidad. Sin ella el hombre sería un ser disperso. Es cuerpo y alma. Es el primer mundo del ser humano... Y siempre, en sus sueños, la casa es una gran cuna, como nos dice Bachelard. Ha habido una evidente evolución del concepto de vivienda, a lo largo del tiempo pero aún así todas las moradas siguen siendo reflejo de sus habitantes. La casa y la morada son dos cosas distintas. Cuando un hombre hace suya una casa, encuentra su morada. ABSTRACT Le Corbusier named the new house as the "machine à habiter / machine for living", adapting it to the industrial revolution that was changing the world from the beginning of the twentieth century. The house, resembled as a machine, was a useful object made by the assembly of industrial pieces like a car, an airplane or a boat. But later, after his trip to the Americas, and reflected at the preface, 'American Prologue', of his book called 'Clarifications', Le Corbusier evolved his ideas into a new way of thinking. Wrote on the boat back to Europe, the lines written in this book are the clear evidence that something has changed in him. We might never get to know all of the variables that influenced his new approach, but we can be certain that the trips to South America, North Africa and Spain played a pivotal role on the evolution of his thinking. In the suburbs of Buenos Aires or Rio, where he was exposed to roughly made houses, without any heart or soul, but nevertheless owned by men, Le Corbusier learnt an unforgettable lesson. Hence, he would retrospect: "I saw a corrugated iron worker house, but very well decorated with a rosebush garnishing the front door. It was a poem of the modern times" or "I deeply look forward for those houses that are people’s homes not architect’s ones". At the end of his life, free of political commitment or an overly strict attachment to the construction, his proposals are more organic and less structural, as represented by the Cabanon built for himself and his wife. In this paper, based on Martin’s Heidegger conference in Darmstadt “Bauen Wohnen Denken” (august 5th of 1951) and supported by Santa Teresa de Cepeda’s (1515-1582) letter and her Seven Mansions of the Interior Castle, transformation and invariance is studied. The house has one of the greatest powers of integration for the thoughts, memories and dreams of men. The house, in the life of an individual, overcome men contingencies and multiplies men advice for continuity. Without it, men would be a dispersed human being. The house is body and soul. It is the first world of the human being ... And always, in his dreams, “the house is a large cradle”, as said by Bachelard. There has been a clear evolution of the concept of housing over time. But after all, the house still remains as a reflection of its inhabitants. When a man makes a house his own, we can conclude, he has found what he can call his “morada”.

O nado de atletas de águas abertas: características do desempenho e da organização temporal das braçadas

A natação de águas abertas tem registrado aumento no número de competições e participantes em todo mundo. Acompanhando esta tendência têm sido desenvolvidos estudos para identificar as características físicas e as respostas fisiológicas dos atletas neste tipo de prova. Entretanto, são escassos estudos ao nível de análise comportamental, principalmente, em condições reais de distância e meio ambiente (mar). Foi objetivo deste estudo investigar as características de desempenho e da organização temporal das braçadas de nadadores de águas abertas. Mais especificamente, conhecer quais recursos os atletas de águas abertas lançam mão para atingir sua meta de vencer um percurso no mar no menor tempo possível. A amostra foi constituída por 23 atletas, com média de idade de 26,4(±3,2) anos. A tarefa foi nadar um trajeto de 1500 metros em forma de um circuito em mar aberto. Para a captação das variáveis relacionadas ao desempenho utilizou-se um GPS (Garmin modelo Fênix 3) e um cronômetro (FINIS modelo Accusplit Eagle AX602). O registro das imagens para captação dos dados relacionados à descrição da organização temporal das braçadas ocorreu em três pontos do trajeto: início (I) - 20 a 40 metros, meio (M) - 800 a 820 metros e final (F) - 1450 a 1470 metros. Foi utilizada uma filmadora (Nikon Coolpix S5300) afixada à embarcação. O software Kinovea 8.20 permitiu a análise quadro a quadro das braçadas. Foram consideradas variáveis dependentes relacionadas ao desempenho (tempo, velocidade e distância total percorrida, bem como, a frequência de braçadas em cada um dos três pontos do trajeto); aos aspectos variantes das braçadas (tempo total do ciclo, das braçadas, das fases aérea e aquática) e aos aspectos invariantes das braçadas (timing relativo das fases aérea e aquática e sua variabilidade). A análise de variância de medidas repetidas foi usada para comparar os três momentos da tarefa (I, M e F) para todas as variáveis, e a correlação de Pearson para analisar a magnitude das relações entre as variáveis de desempenho, enquanto o teste t de Student para medidas pareadas foi utilizado para comparar as possíveis diferenças entre os braços direito e esquerdo para cada um dos momentos e determinou-se como significância estatística α≤=0,05. Em relação ao desempenho, os resultados indicaram que os nadadores fizeram uso de frequência de braçada (Fb) diferente para os três momentos, sendo maior no I quando comparada ao M e F, e no M, menor que em F; estas mudanças foram acompanhadas por ajustes nos aspectos variantes como o tempo total do ciclo, das braçadas e das fases aérea e aquática. Ainda, nos três momentos os nadadores apresentaram simetria temporal entre as braçadas dos dois braços, apesar de as diferenças serem evidenciadas entre as fases das braçadas quando comparados os braços. Com relação aos aspectos invariantes detectou-se mudança do padrão de I para M e F da tarefa, sendo que em M e F os atletas utilizaram a mesma estrutura temporal. Quanto à variabilidade dos aspectos variantes e invariantes para as braçadas e as fases das braçadas, observou-se diminuição da magnitude ao longo da tarefa sendo que o braço esquerdo apresentou nos três momentos maior variabilidade que o direito. Assim, diante dos resultados, concluiu-se que os recursos utilizados por nadadores habilidosos para nadar em ambiente pouco estável, em condições reais de distância e meio ambiente (mar) compreendem a alteração do desempenho (Fb) associado a ajustes nos aspectos variantes, concomitantemente à alteração dos aspectos invariantes das braçadas, em função do momento da tarefa

Modelo computacional para avaliação do desempenho hidrodinâmico de embarcações de planeio em águas calmas.

Em geral, uma embarcação de planeio é projetada para atingir elevados níveis de velocidade. Esse atributo de desempenho está diretamente relacionado ao porte da embarcação e à potência instalada em sua planta propulsiva. Tradicionalmente, durante o projeto de uma embarcação, as análises de desempenho são realizadas através de resultados de embarcações já existentes, retirados de séries sistemáticas ou de embarcações já desenvolvidas pelo estaleiro e/ou projetista. Além disso, a determinação dos atributos de desempenho pode ser feita através de métodos empíricos e/ou estatísticos, onde a embarcação é representada através de seus parâmetros geométricos principais; ou a partir de testes em modelos em escala reduzida ou protótipos. No caso específico de embarcações de planeio, o custo dos testes em escala reduzida é muito elevado em relação ao custo de projeto. Isso faz com que a maioria dos projetistas não opte por ensaios experimentais das novas embarcações em desenvolvimento. Ao longo dos últimos anos, o método de Savitsky foi largamente utilizado para se realizar estimativas de potência instalada de uma embarcação de planeio. Esse método utiliza um conjunto de equações semi-empíricas para determinar os esforços atuantes na embarcação, a partir dos quais é possível determinar a posição de equilíbrio de operação e a força propulsora necessária para navegar em uma dada velocidade. O método de Savitsky é muito utilizado nas fases iniciais de projeto, onde a geometria do casco ainda não foi totalmente definida, pois utiliza apenas as características geométricas principais da embarcação para realização das estimativas de esforços. À medida que se avança nas etapas de projeto, aumenta o detalhamento necessário das estimativas de desempenho. Para a realização, por exemplo, do projeto estrutural é necessária uma estimativa do campo de pressão atuante no fundo do casco, o qual não pode ser determinado pelo método de Savitsky. O método computacional implementado nesta dissertação, tem o objetivo de determinar as características do escoamento e o campo de pressão atuante no casco de uma embarcação de planeio navegando em águas calmas. O escoamento é determinado através de um problema de valor de contorno, no qual a superfície molhada no casco é considerada um corpo esbelto. Devido ao uso da teoria de corpo esbelto o problema pode ser tratado, separadamente, em cada seção, onde as condições de contorno são forçadamente respeitadas através de uma distribuição de vórtices.

An account of my quarter bills, charges &c from July 11th 1743 to July 13th 1748 at Harvard College

Handwritten account book kept while Storer was a student at Harvard College. The well-organized volume is arranged by expense type and then date and was updated periodically, usually quarterly. The information offers a glimpse at the expenses of a Harvard student and provides information about the larger community that supported student life. The precise entries indicate the lifelong habits of Storer as a careful and methodical financial manager that would prove so valuable when he served as Harvard's treasurer more than thirty years later. Storer documents accounts with the steward, butler, sweeper, glazier, barber, and lists these individuals by name. The volume also includes notes on expenses for boarding, transportation, wood, and pocket expenses. While most entries do not list specific purchases, Storer provides details on the cost of a Harvard Commencement in 1747 (including the cost of a diploma, money to the President, hiring a house, a boat, a woman, and "2 Negroes"), and a specific accounting of the different food purchased for the event; Storer also lists expenses for an 1748 "supper for the graduates."

Letter from Samuel Willard, Brunswick, Maine, to William Willard and Katherine Willard, Petersham, Massachusetts, May 13, 1804

Willard complains about his eyesight, discusses upcoming plans to visit Penobscot, and describes river boat accident in which four of his neighbors drowned.

Boston Harbor, Massachusetts, 1865 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Boston Harbor : showing the steamboat routes to places of amusement, engraved by G.W. Boynton. It was published by J.H. Daniels in 1865. Scale [ca. 1:63,360]. Covers Boston Harbor and adjacent lands. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Massachusetts State Plane Coordinate System, Mainland Zone (in Feet) (Fipszone 2001). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows coastal features such as rocks, shoals, light houses, beacons, channels, steam boat routes and landings, points, coves, islands, and more. Depths are shown by shading. It also shows land features such as roads, settlements, forts, drainage, and more. Relief is shown by hachures. This layer is part of a selection of digitally scanned and georeferenced historic maps of Massachusetts from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of regions, originators, ground condition dates (1755-1922), scales, and purposes. The digitized selection includes maps of: the state, Massachusetts counties, town surveys, coastal features, real property, parks, cemeteries, railroads, roads, public works projects, etc.