Influence of homeopathic treatment with comfrey on bone density around titanium implants. A digital subtraction radiography study in rats

Objective: The objective of this study was to evaluate the influence of homeopathic treatment with comfrey (Shymphytum officinalis 6CH) on radiographic bone density and area around titanium implants.Material and methods: Forty-eight rats were divided into two groups of 24 animals each: a control group (C) and a test group (SO). Each animal received one titanium micro-implant placed in the tibia. The animals in Group SO were subjected to 10 drops of comfrey 6CH per day mixed into their drinking water until the day of sacrifice. Eight animals of each group were sacrificed at 7, 14 and 28 days post-surgery, respectively.Standardized digital radiographs were obtained on the day of implant installation (baseline images) and on the day of sacrifice (final images). Digital subtraction of the two corresponding images was performed to evaluate changes in bone density and the area related to change around the implant between baseline and final images.Results: Subtraction images demonstrated that a significant difference existed in mean shade of gray at 14 days post-surgery between Group SO (mean 175.3 +/- 14.4) and Group C (mean 146.2 +/- 5.2). Regarding the area in pixels corresponding to the bone gain in Group SO, the differences observed between the sacrifice periods and groups were only significant at 7 days sacrifice between Group SO (mean 171.2 +/- 21.9) and Group C (mean 64.5 +/- 60.4).Conclusion: Within the limits of this study, comfrey administration promotes an increase in radiographic bone density around titanium implants in the initial period of bone healing.

The center of the incisive papilla for the selection of complete denture maxillary anterior teeth in 4 racial groups

Objectives: To evaluate the use of the center of the incisive papilla as a guide for the selection of the proper width of maxillary dentures in 4 racial groups. Method and Materials: One hundred sixty stone casts were obtained from impressions of the maxillary arch of white, black, mixed, and Asian subjects. The occlusal surfaces of the casts were photocopied and the images placed on a digitizer. The most anterior and posterior points of the papilla and cusp tips of the canines were digitized. Dentofacial Planner Plus software was used to calculate the distance from a line passing through the cusp tips of the canines to the center of the papilla, defined as the midpoint of the anterior and posterior points of the papilla. The selection error (in millimeters) due to the clinical application of the method of the incisive papilla was calculated and analyzed. Results: In all studied racial groups, there was no coincidence between the center of the incisive papilla and the canine line. The utilization of the center of the papilla would lead to the selection of wider artificial teeth. In 24.9% of the white, 19.3% of the mixed, 32.9% of the black, and 15.5% of the Asian populations, errors greater than 4 mm would be present with the utilization of the papilla. Conclusion: The method of the center of the incisive papilla is not accurate, but may aid in initial artificial teeth selection for the racial groups studied. (Quintessence Int 2008;39:841-845)

Phase-Locked loops lock-in range in Frequency Modulated-Atomic Force Microscope nonlinear control system

Since the mid 1980s the Atomic Force Microscope is one the most powerful tools to perform surface investigation, and since 1995 Non-Contact AFM achieved true atomic resolution. The Frequency-Modulated Atomic Force Microscope (FM-AFM) operates in the dynamic mode, which means that the control system of the FM-AFM must force the micro-cantilever to oscillate with constant amplitude and frequency. However, tip-sample interaction forces cause modulations in the microcantilever motion. A Phase-Locked loop (PLL) is used to demodulate the tip-sample interaction forces from the microcantilever motion. The demodulated signal is used as the feedback signal to the control system, and to generate both topographic and dissipation images. As a consequence, a proper design of the PLL is vital to the FM-AFM performance. In this work, using bifurcation analysis, the lock-in range of the PLL is determined as a function of the frequency shift (Q) of the microcantilever and of the other design parameters, providing a technique to properly design the PLL in the FM-AFM system. (C) 2011 Elsevier B.V. All rights reserved.

River avulsions on the Taquari megafan, Pantanal wetland, Brazil

The Pantanal wetland is located in a tectonically active interior sedimentary basin in west-central Brazil. The south-flowing Paraguay River is the trunk-river of an alluvial constructional landform comprising several large alluvial fans, the largest one of which is the Taquari megafan. The Taquari River flows in two distinct geomorphologic zones within the megafan. Entrenched on sediments of Pleistocene fan lobes, the Taquari River flows in a 3 to 5 km wide meander belt in the upper fan, where avulsion is hindered by entrenchment. Downstream of the intersection point, stream discharge progressively decreases and the Taquari River becomes narrow and shallow toward the Paraguay River plain. Within the distributary fan lobe, the channel-levee sandy complex is topographically higher than the adjacent floodplains and avulsion is a natural consequence of crevasses in the natural levees. Many channel avulsions have occurred during the last decades and documented cases show that significant channel changes may take place in a few years. Beginning with crevassing in 1988 and ending with the abandonment of the former channel in 1998, the river completely changed course in the lower fan. Presently, a major avulsion is occurring in the upper portion of the growing fan lobe, where many crevasses have appeared in the natural levees with associated splays onto the floodbasin. New anastomosed channels have formed north of the Taquari River, but downstream of them the flow is unconfined and the water spreads into natural floodbasins. This avulsion is still in process and allows observation of channel evolution, the geomorphic features produced, the sedimentary processes involved, and resulting effects. If the new channels do not rejoin the main channel, the river mouth may abandon its present master channel and shift to a position a hundred kilometers north from its present position. A large volume of sediment has been transferred to the floodbasin, with progradation of crevasse splay deposits over fine overbank sediments. Many geomorphic features, recognizable in satellite and radar images, clearly show that avulsion has occurred many limes before in the Taquari River. Avulsion belt deposits and former diverted channels testify to ancient avulsion events within the fan lobe and show that progradation of splays onto the floodbasin is the most important infilling process within the Taquari distributary fan lobe. The avulsion process in the lower Taquari River has accelerated in the last 30 years, along with the magnitude of flooding. Pasture and intensive agriculture in the catchment area has increased the sediment supply to the wetland, but larger floods are also a consequence of higher rainfall since 1973. Avulsion and floods have been a cause of great concern among the local population and landowners. Before human intervention in attempting to control floods, however, a better understanding of the avulsive river system is needed, especially because a major navigation project including the channelization of the Paraguay River was recently proposed. (c) 2005 Elsevier B.V. All rights reserved.

Radiografia intraoral e convencional da hemiarcada superior direita de gatos domésticos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência do cetoprofeno na consolidação óssea de ulnas osteotomizadas de coelhos: estudo qualitativo e quantitativo através de programas computacionais

OBJETIVO: Acompanhar o processo de consolidação óssea de ulnas osteotomizadas de coelhos tratados com cetoprofeno, por meio de programas computacionais. MÉTODOS: Os coelhos foram submetidos a osteotomia da ulna e divididos em dois grupos. No grupo A (n=10) os animais foram tratados com cetoprofeno (2mg.kg-1) durante cinco dias. O grupo B (n=5) serviu como controle. Os animais foram radiografados um dia após a operação e a cada 7 dias até perfazer 28 dias. No ato da tomada radiográfica, junto à região a ser estudada, foram colocadas uma escada e uma cunha de alumínio que serviram como referencial de densidade óptica. As imagens radiográficas foram digitalizadas através de um scanner. O programa ODR forneceu imagens tridimensionais e coloridas. Outro programa, CROMOX, avaliou a densidade mineral óssea da região da ostetotomia. RESULTADOS: As imagens fornecidas pelo ODR proporcionaram melhor visualização da lesão e do processo de consolidação óssea. O programa CROMOX forneceu uma análise quantitativa ao calcular a densidade mineral do calo ósseo formado ao longo dos 28 dias de observação. Não houve diferença estatisticamente significante entre os valores de densidade mineral óssea das ulnas osteotomizadas dos coelhos tratados com cetoprofeno e do grupo controle, nas radiografias realizadas ao longo de 28 dias de pós-operatório. CONCLUSÃO: O cetoprofeno não interferiu no processo de formação do calo ósseo de ulnas osteotomizadas de coelhos.

Repetibilidade da mensuração de imagens das características de carcaça obtidas por ultrassonografia em fêmeas Nelore

Avaliou-se a repetibilidade da mensuração de imagens de ultrassom da área do músculo longissimus dorsi (AOL) e das espessuras de gordura subcutânea do lombo (EGL) e da garupa (EGG). Imagens de ultrassom tomadas no lombo (entre a 12ª e a 13ª costela) e na garupa (entre os músculos gluteus medium e biceps femoris) de novilhas Nelore de 14 a 22 meses de idade foram classificadas em aceitáveis, marginais e rejeitáveis. As imagens aceitáveis e marginais foram mensuradas duas vezes por três técnicos em diferentes níveis de treinamento. Foram estimadas as repetibilidades entre e dentro de técnicos por classe de qualidade da imagem, para determinação do efeito da qualidade da imagem e do técnico no valor absoluto da diferença entre a primeira e a segunda mensuração dessas características. A repetibilidade para as imagens aceitáveis foi maior que para imagens marginais, tanto entre como dentro de técnicos. Na análise da diferença absoluta entre a primeira e a segunda interpretação, foram significativos os efeitos de técnico para AOL e EGL e de classe de qualidade da imagem para AOL. em geral, o técnico com maior experiência apresentou maiores valores de repetibilidade. É recomendável que a mensuração de imagens de animais de mesmo grupo contemporâneo seja feita por um único técnico.

Fotointerpretacao comparativa de fotografias pancromaticas, imagens de radar e de satelite

Three types of imagery were evaluated for mapping drainage patterns and vegetation in a 100 000 ha area of Sao Paulo State, Brazil. The drainage measurements were drainage density, frequency of channels and texture ratio, studied on circular samples of 10 km2 for panchromatic photography and 100 km2 for radar and satellite images. The vegetation types were forest, pasture, sugar cane and rice, studied on circular samples of 100 km2. Radar images were the most convenient method to study drainage patterns and the land forms of large areas, while Landsat imagery was most efficient for the study of vegetative cover, although panchromatic photographs were the most accurate method.-from Field Crop Abstracts

Aspectos fisico-geograficos da Regiao Administrativa de Aracatuba.

In this region there are exposures of sandstones, siltstones, and argillites of the Adamantina Formation, belonging to the Bauru Group. Using satellite and radar images, superposition of drainage maps, toposheets geologic and pedologic maps and field trips, it was possible to discern (three geomorphological domains; a) hilly and interfluvial plateau in the divisories areas of Tiete - Aguapei and Tiete - Sao Jose dos Dourados mainrivers; b) colluvial surfaces located around the interfluvial plateau; and c) fluvial terraces and floodplains. The indiscriminant use of the soils is accelerating the erosive process, increasing the sedimentation of the river beds, the size of the floodplains and prejudicing the water quality, used to supply the rural and urban population. -from English summary

Dinâmica da ocupação do solo bacia do Rio Itiquira, Mato Grosso, Brasil

The study area corresponds to the basin of the Itiquira river high course, totalling 5,361km2. In this area a study of the environmental dynamics was made, applying SIG techniques and satellite images of the years 1966, 1985 and 1996. In 1966 the areas of natural vegetation (forests and groves) occupied 90.64% of the total of the area, which was diminished to 60.57% in 1985 and to only 36.66% in 1996. In this process, 289,382ha of a total of 485,928ha of natural vegetal covering had been lost. At the same time, the agrarian surfaces (agriculture and pasture) that occupied only 0.52% of the total area in 1966, increased to 34.89% in 1985 and to 59.04% in 1996. In 30 years there was an increase of 313,725ha of cultivated lands, corresponding to about 113 times the land occupation of the year of 1966 (2,798ha). The areas classified as urban show a gradual increase since 1966, from 39ha in 1996 to 58ha in 1985, and to 178ha in 1996. The other classes of soil use and occupation (reforestement areas, uncovered and affected by fire and humid areas) added were smaller than 4,27% in 1996.

Spontaneous eye blink analysis in the normal individual

Purpose: Spontaneous eye blink activity in the primary eye position and its relationship to age and gender were assessed using digital image processing techniques to quantify blink opening and closing time. Methods: One hundred-and-eighty healthy volunteers (90 males and 90 females), divided into the age groups 0-3, 4-12, 13-20, 21-40, 41-60 and ≥60 years old, were evaluated prospectively. They were videotaped digitally in a standard setting and the images were transferred to a personal computer (Macintosh 400) and processed with the iMovie software. Blink opening and closing time were measured at 30 frames/second. The data were then subjected to statistical analysis. Results: The closing time was significantly longer than the opening time for all ages and both genders. Elderly individuals (≥41 years old) and women had significantly longer closing times. Conclusion: Image processing techniques made possible the observation of differences in spontaneous eye blink opening and closing time in relation to age and gender. Copyright © 2005 Taylor & Francis LLC.

Does the thickness of the resin cement affect the bond strength of a fiber post to the root dentin?

This study aimed to evaluate the influence of cement thickness on the bond strength of a fiber-reinforced composite (FRC) post system to the root dentin. Eighteen single-rooted human teeth were decoronated (length: 16 mm), the canals were prepared, and the specimens were randomly allocated to 2 groups (n = 9): group 1 (low cement thickness), in which size 3 FRC posts were cemented using adhesive plus resin cement; and group 2 (high cement thickness), in which size 1 FRC posts were cemented as in group 1. Specimens were sectioned, producing 5 samples (thickness: 1.5 mm). For cement thickness evaluation, photographs of the samples were taken using an optical microscope, and the images were analyzed. Each sample was tested in push-out, and data were statistically analyzed. Bond strengths of groups 1 and 2 did not show significant differences (P = .558), but the cement thicknesses for these groups were significantly different (P < .0001). The increase in cement thickness did not significantly affect the bond strength (r2 = 0.1389, P = .936). Increased cement thickness surrounding the FRC post did not impair the bond strength.

Accuracy of impression techniques for implants. Part 1 - Influence of transfer copings surface abrasion

Purpose: This study evaluated the influence of surface abrasion of transfer copings to obtain a precise master cast for a partially edentulous restoration with different inclinations. Materials and Methods: Replicas (N = 30) of a metal matrix (control group) containing two implants at 90° and 65° in relation to the benchtop were obtained using a polyether impression material and three impression techniques: square impression copings splint with dental floss and autopolymerizing acrylic resin (TRS), square impression copings abraded with aluminum oxide (TA), and square impression copings abraded with aluminum oxide and adhesive-coated (TAA). The replicas obtained in type V stone were digitalized, and the images were exported to AutoCAD software to perform the readings of possible degree alterations in implant inclinations. The results were submitted to analysis of variance (ANOVA) and Tukey test (α < 0.05). Results: Comparing the techniques with regard to the 90° implant inclination, no statistical difference was observed between the three techniques and the control group. Analyzing the three techniques with regard to the 65° implant inclination, no significant difference was seen between technique TA and the control group. Conclusions: Technique TA presented more accurate master casts than TRS and TAA techniques. The angulated implant (65°) tended to generate more imprecise master casts than implants perpendicular to the surface. © 2008 by The American College of Prosthodontists.

Improving synthetic aperture image by image compounding in beamforming process

In this work, signal processing techniques are used to improve the quality of image based on multi-element synthetic aperture techniques. Using several apodization functions to obtain different side lobes distribution, a polarity function and a threshold criterium are used to develop an image compounding technique. The spatial diversity is increased using an additional array, which generates complementary information about the defects, improving the results of the proposed algorithm and producing high resolution and contrast images. The inspection of isotropic plate-like structures using linear arrays and Lamb waves is presented. Experimental results are shown for a 1-mm-thick isotropic aluminum plate with artificial defects using linear arrays formed by 30 piezoelectric elements, with the low dispersion symmetric mode S0 at the frequency of 330 kHz. © 2011 American Institute of Physics.

Effect of airborne particle abrasion protocols on surface topography of Y-TZP ceramic

This study aimed to evaluate Y-TZP surface after different airborne particle abrasion protocols. Seventy-six Y-TZP ceramic blocks (5×4×4) mm3 were sintered and polished. Specimens were randomly divided into 19 groups (n=4) according to control group and 3 factors: a) protocol duration (2 and 4 s); b) particle size (30 μm, alumina coated silica particle; 45 μm, alumina particle; and 145 μm, alumina particle) and; c) pressure (1.5, 2.5 and 4.5 bar). Airborne particle abrasion was performed following a strict protocol. For qualitative and quantitative results, topography surfaces were analyzed in a digital optical profilometer (Interference Microscopic), using different roughness parameters (Ra, Rq, Rz, X-crossing, Mr1, Mr2 and Sdr) and 3D images. Surface roughness also was analyzed following the primer and silane applications on Y-TZP surfaces. One-way ANOVA revealed that treatments (application period, particle size and pressure of particle blasting) provided significant difference for all roughness parameters. The Tukey test determined that the significant differences between groups were different among roughness parameters. In qualitative analysis, the bonding agent application reduced roughness, filing the valleys in the surface. The protocols performed in this study verified that application period, particle size and pressure influenced the topographic pattern and amplitude of roughness.