Coastal Heritage

The South Carolina Sea Grant Consortium publishes Coastal Heritage, a quarterly publication that covers environmental policy, science, history, and culture.

Coastal Heritage

The South Carolina Sea Grant Consortium publishes Coastal Heritage, a quarterly publication that covers environmental policy, science, history, and culture.

Coastal Heritage

The South Carolina Sea Grant Consortium publishes Coastal Heritage, a quarterly publication that covers environmental policy, science, history, and culture.

Coastal Heritage

The South Carolina Sea Grant Consortium publishes Coastal Heritage, a quarterly publication that covers environmental policy, science, history, and culture.

Green mitigation strategy for cultural heritage: bacterial potential for biocide production

Several biosurfactants with antagonistic activity are produced by a variety of microorganisms. Lipopeptides (LPPs) produced by some Bacillus strains, including surfactin, fengycin and iturin are synthesized nonribosomally by mega-peptide synthetase (NRPS) units and they are particularly relevant as antifungal agents. Characterisation, identification and evaluation of the potentials of several bacterial isolates were undertaken in order to establish the production of active lipopeptides against biodeteriogenic fungi from heritage assets. Analysis of the iturin operon revealed four open reading frames (ORFs) with the structural organisation of the peptide synthetases. Therefore, this work adopted a molecular procedure to access antifungal potential of LPP production by Bacillus strains in order to exploit the bioactive compounds synthesis as a green natural approach to be applied in biodegraded cultural heritage context. The results reveal that the bacterial strains with higher antifungal potential exhibit the same morphological and biochemical characteristics, belonging to the genera Bacillus. On the other hand, the higher iturinic genetic expression, for Bacillus sp. 3 and Bacillus sp. 4, is in accordance with the culture antifungal spectra. Accordingly, the adopted methodology combining antifungal screening and molecular data is represent a valuable tool for quick identification of iturin-producing strains, constituting an effective approach for confirming the selection of lipopeptides producer strains.

A first insight on the biodegradation of limestone - the case of the World Heritage Convent of Christ

The present study is a multidisciplinary approach applied to architectural stone materials of the Convent of Christ in Tomar (Portugal) in order to understand and mitigate the active decay processes. The structure and appearance of the stonework from the Convent of Christ are strongly affected by stains, biofilms and structural degradation. To investigate these phenomena, a multianalytical approach comprising X-ray microdiffraction, scanning electron microscopy, microRaman and microinfrared spectroscopy was applied to the examination of altered outdoor stone areas being detected calcium oxalates, carotenoids and microbial proliferation. The presence of these alteration products seems to be correlated with the microbial activity of bacteria, microalgae, cyanobacteria and filamentous fungi. This work showed that the application of complementary methodologies is an efficient strategy to characterise the stone decay, and constitute a starting point for successful conservation intervention plans that are urgent to ensure the preservation and safeguard of this emblematic monument.

Toxicological assessment of novel green biocides for cultural heritage.

The damaging of buildings and monuments by biological contamination is a cause of serious concern. Biocides based on chemical toxic compounds have been used to mitigate this problem. However, in the past decade many of the most effective biocides have been banned due to their environmental and health hazards. Therefore, proper remediation actions for microbiologically contaminated historic materials based on environmentally safe solution is of vital importance. Bacillus species are emerging as a promising alternative for built heritage treatment. They produce a great diversity of secondary metabolites with biological activity, well known to possess antagonistic activities against many fungal pathogens. In order to evaluate the antifungal activity of the novel biocides produced in our laboratory by cultures of selected bacterial strains, liquid interaction assays using four biodeteriogenic fungi were achieved, revealing a nearly 100% of inhibitory capacity to fungal proliferation. To confirm their effective safe toxicological properties, in vivo tests using two different biological models were performed. The lyophilized supernatant of the Bacillus culture broth showed no lethality against brine shrimp and also no toxicological effects in Swiss mice through administration of acute dose of 5000 mg/kg by oral gavage. In fact, the bioactive compounds were no lethal at the tested dose unlike Preventol® (commercial biocide) that induced acute toxicity with 10 times minor concentration dose administrated in the same conditions. Therefore, the new bioactive compounds that suppress growth of biodeteriogenic fungi on historical artworks, presenting at the same time no toxicity against other living organisms, constituting an efficient and green safe solution for biodegradation/biodeterioration treatment of Cultural Heritage.

Industrial Heritage: Atarazanas Market’s squares in Málaga

This abstract tries to make known one of the first attempts to recuperate the buildings heritage at the end of the 19th century in Spain: It’s called Atarazanas Market’s squares in Málaga, a marvellous Joaquín Rucoba’s architect work. It is one of the first examples in iron architecture in Spain which opted preservation building heritage from the respect of the place memory even in his last restoration.

Expenditure pattern analysis of cultural tourists at World Heritage Sites: an empirical evidence based on CHAID analysis

Nowadays, World Heritage Sites (WHS) have been facing new challenges, partially due to a different tourism consumption patterns. As it is highlighted in a considerable amount of studies, visits to these sites are almost justified by this prestigious classification and motivations are closely associated with their cultural aspects and quality of the overall environment (among others, Marujo et al, 2012). However, a diversity of tourists’ profiles have been underlined in the literature. Starting from the results obtained in a previous study about cultural tourists’ profile, conducted during the year 2009 in the city of Évora, Portugal, it is our intend to compare the results with a recent survey applied to the visitors of the same city. Recognition of Évora by UNESCO in 1986 as “World Heritage” has fostered not only the preservation of heritage but also the tourist promotion of the town. This study compares and examined tourists’ profile, regarding from the tourists’ expenditure patterns in Évora. A total of 450 surveys were distributed in 2009, and recently, in 2015, the same numbers of surveys were collected. Chi-squared Automatic Interaction Detection (CHAID) was applied to model consumer patterns of domestic and international visitors, based on socio demographic, trip characteristics, length of stay and the degree of satisfaction of pull factors. CHAID allowed find a population classification in groups that able to describe the dependent variable, average daily tourist expenditure. Results revealed different patterns of daily average expenditure amongst the years, 2009 and 2015, even if primarily results not revealed significant variations in socio-demographic and trip characteristics among the visitors’ core profile. Local authorities should be aware of this changing expensive behavior of cultural visitors and should formulate strategies accordingly. Policy and managerial recommendations are discussed.

Expenditure pattern analysis of cultural tourists at World Heritage Sites: empirical evidence based on CHAID analysis

This study investigates tourists’ expenditure patterns in the city of Évora, a world heritage site (WHS) classified by UNESCO. The use of chi-squared automatic interaction detection (CHAID) was chosen, allowing the identification of distinct segments based on expenditure patterns. Visitors’ expenditure patterns have proven to be a pertinent element for a broader understanding of visitors’ behaviour at cultural destinations. Visitors’ expenditure patterns were revealed to be increasing within years studied.

Development and optimisation of protocols for surface cleaning of cultural heritage metals

The conservation and valorisation of cultural heritage is of fundamental importance for our society, since it is witness to the legacies of human societies. In the case of metallic artefacts, because corrosion is a never-ending problem, the correct strategies for their cleaning and preservation must be chosen. Thus, the aim of this project was the development of protocols for cleaning archaeological copper artefacts by laser and plasma cleaning, since they allow the treatment of artefacts in a controlled and selective manner. Additionally, electrochemical characterisation of the artificial patinas was performed in order to obtain information on the protective properties of the corrosion layers. Reference copper samples with different artificial corrosion layers were used to evaluate the tested parameters. Laser cleaning tests resulted in partial removal of the corrosion products, but the lasermaterial interactions resulted in melting of the desired corrosion layers. The main obstacle for this process is that the materials that must be preserved show lower ablation thresholds than the undesired layers, which makes the proper elimination of dangerous corrosion products very difficult without damaging the artefacts. Different protocols should be developed for different patinas, and real artefacts should be characterised previous to any treatment to determine the best course of action. Low pressure hydrogen plasma cleaning treatments were performed on two kinds of patinas. In both cases the corrosion layers were partially removed. The total removal of the undesired corrosion products can probably be achieved by increasing the treatment time or applied power, or increasing the hydrogen pressure. Since the process is non-invasive and does not modify the bulk material, modifying the cleaning parameters is easy. EIS measurements show that, for the artificial patinas, the impedance increases while the patina is growing on the surface and then drops, probably due to diffusion reactions and a slow dissolution of copper. It appears from these results that the dissolution of copper is heavily influenced by diffusion phenomena and the corrosion product film porosity. Both techniques show good results for cleaning, as long as the proper parameters are used. These depend on the nature of the artefact and the corrosion layers that are found on its surface.

3D Surveying and Data Management towards the Realization of a Knowledge System for Cultural Heritage

The research activities involved the application of the Geomatic techniques in the Cultural Heritage field, following the development of two themes: Firstly, the application of high precision surveying techniques for the restoration and interpretation of relevant monuments and archaeological finds. The main case regards the activities for the generation of a high-fidelity 3D model of the Fountain of Neptune in Bologna. In this work, aimed to the restoration of the manufacture, both the geometrical and radiometrical aspects were crucial. The final product was the base of a 3D information system representing a shared tool where the different figures involved in the restoration activities shared their contribution in a multidisciplinary approach. Secondly, the arrangement of 3D databases for a Building Information Modeling (BIM) approach, in a process which involves the generation and management of digital representations of physical and functional characteristics of historical buildings, towards a so-called Historical Building Information Model (HBIM). A first application was conducted for the San Michele in Acerboli’s church in Santarcangelo di Romagna. The survey was performed by the integration of the classical and modern Geomatic techniques and the point cloud representing the church was used for the development of a HBIM model, where the relevant information connected to the building could be stored and georeferenced. A second application regards the domus of Obellio Firmo in Pompeii, surveyed by the integration of the classical and modern Geomatic techniques. An historical analysis permitted the definitions of phases and the organization of a database of materials and constructive elements. The goal is the obtaining of a federate model able to manage the different aspects: documental, analytic and reconstructive ones.

Advanced Spectroscopy for the Study of Colourants in Cultural Heritage

Colourants are substances used to change the colour of something, and are classified in three typology of colorants: a) pigments, b) dyes, and c) lakes and hybrid pigments. Their identification is very important when studying cultural heritage; it gives information about the artistic technique, can help in dating, and offers insights on the condition of the object. Besides, the study of the degradation phenomena constitutes a framework for the preventive conservation strategies, provides evidence of the object's original appearance, and contributes to the authentication of works of art. However, the complexity of these systems makes it impossible to achieve a complete understanding using a single technique, making necessary a multi-analytical approach. This work focuses on the set-up and application of advanced spectroscopic methods for the study of colourants in cultural heritage. The first chapter presents the identification of modern synthetic organic pigments using Metal Underlayer-ATR (MU-ATR), and the characterization of synthetic dyes extracted from wool fibres using a combination of Thin Layer Chromatography (TLC) coupled to MU-ATR using AgI@Au plates. The second chapter presents the study of the effect of metallic Ag in the photo-oxidation process of orpiment, and the influence of the different factors, such as light and relative humidity. We used a combination of vibrational and synchrotron radiation-based X-ray microspectroscopy techniques: µ-ATR-FT-IR, µ-Raman, SR-µ-XRF, µ-XANES at S K-, Ag L3- and As K-edges and SR-µ-XRD. The third chapter presents the study of metal carboxylates in paintings, specifically on the formation of Zn and Pb carboxylates in three different binders: stand linseed oil, whole egg, and beeswax. We used micro-ATR-FT-IR, macro FT-IR in total reflection (rMA-FT-IR), portable Near-Infrared spectroscopy (NIR), macro X-ray Powder Diffraction (MA-XRPD), XRPD, and Gas Chromatography Mass-Spectrometry (GC-MS). For the data processing, we explored the data from rMA-FT-IR and NIR with the Principal Component Analysis (PCA).

Management Perspectives on Industrial Heritage: an Exploratory Research

The current research project focuses on the analysis of the critical issues of industrial heritage management in Italy and the preservation of organizational history within the reuse projects of former industrial sites. The organizational and managerial perspective is crucial on two levels. Firstly, it is important in the analysis of the original significance of the site, and in particular its organizational history, and its conservation within the new regeneration strategy. Secondly, it is crucial at the phase of management of reuse projects and its feasibility and sustainability analysis. Based on the analysis of the literature, a unique classification of the reuse strategies that can be implemented in order to regenerate former industrial sites has been formulated. The exploratory research thus adapts a multiple case study design. Eight Italian case studies have been chosen, one for each type of regeneration strategy. Each case study is explored as a stand-alone entity through the analysis of the local differences and idiosyncrasies of the specific context, the factors that stood behind the choice of the reuse strategy and the way the reuse project evolved through the years. Then, the current management of each reuse project is analysed. The narration and musealization of the organizational history is investigated through the spatial dimension, the level of content and the level of expression. Secondly, the case studies are compared through a cross-case analysis from three different perspectives: issues on the phase of preparation and implementation of the reuse projects, critical issues behind the current management of new projects and issues on the ways of preservation and narration of organizational history within the new project. The research shows that all regeneration strategies are affected by the conflict between preservation and change, by the issue of materiality and selectivity.

Synthesis, characterization, and application of PHB-based gels for cultural heritage conservation

The aim of my master thesis is developing novel, greener approaches for the cleaning of artworks: such treatment consists in the removal of old varnish layers which tend to discolor or darken with time, thus allowing replacement with a new protecting coat. While protocols presently applied can be effective in the cleaning of the artworks, none of them take into account conservators’ health safety and environmental issues. Thus, using biomass-derived components, which are non-toxic and reusable and/or compostable might bring into the heritage conservation an additional awareness about safety and environmental claiming. The laboratory work for the thesis is a collaborative work between different groups. The biggest part of the work was at the Polymer group where gels were synthesized using Polyhydroxybutyrate (PHB) from sustainable resources and green solvents. The use of the gels might help to reduce the volatilization of solvents and contributes to the localization of the cleaning action. After the preparation of the gels, different characterization methods were used in order to estimate their properties and shelf-life. Finally, the work was completed on the application of the gels on sculpture, coated with undesired layers to be removed. Here, pre-mapping of the areas of interest was realized with different optical techniques, followed by the application of the gels for the cleaning and analyzing the effectiveness of cleaning.