A structural method for the design of fault tolerant distributed control systems

Distributed digital control systems provide alternatives to conventional, centralised digital control systems. Typically, a modern distributed control system will comprise a multi-processor or network of processors, a communications network, an associated set of sensors and actuators, and the systems and applications software. This thesis addresses the problem of how to design robust decentralised control systems, such as those used to control event-driven, real-time processes in time-critical environments. Emphasis is placed on studying the dynamical behaviour of a system and identifying ways of partitioning the system so that it may be controlled in a distributed manner. A structural partitioning technique is adopted which makes use of natural physical sub-processes in the system, which are then mapped into the software processes to control the system. However, communications are required between the processes because of the disjoint nature of the distributed (i.e. partitioned) state of the physical system. The structural partitioning technique, and recent developments in the theory of potential controllability and observability of a system, are the basis for the design of controllers. In particular, the method is used to derive a decentralised estimate of the state vector for a continuous-time system. The work is also extended to derive a distributed estimate for a discrete-time system. Emphasis is also given to the role of communications in the distributed control of processes and to the partitioning technique necessary to design distributed and decentralised systems with resilient structures. A method is presented for the systematic identification of necessary communications for distributed control. It is also shwon that the structural partitions can be used directly in the design of software fault tolerant concurrent controllers. In particular, the structural partition can be used to identify the boundary of the conversation which can be used to protect a specific part of the system. In addition, for certain classes of system, the partitions can be used to identify processes which may be dynamically reconfigured in the event of a fault. These methods should be of use in the design of robust distributed systems.

Development of performance models for co-operative information systems in an organisational context

The thesis reports of a study into the effect upon organisations of co-operative information systems (CIS) incorporating flexible communications, group support and group working technologies. A review of the literature leads to the development of a model of effect based upon co-operative business tasks. CIS have the potential to change how co-operative business tasks are carried out and their principal effect (or performance) may therefore be evaluated by determining to what extent they are being employed to perform these tasks. A significant feature of CIS use identified is the extent to which they may be designed to fulfil particular tasks, or by contrast, may be applied creatively by users in an emergent fashion to perform tasks. A research instrument is developed using a survey questionnaire to elicit users judgements of the extent to which a CIS is employed to fulfil a range of co-operative tasks. This research instrument is applied to a longitudinal study of Novell GroupWise introduction at Northamptonshire County Council during which qualitative as well as quantitative data were gathered. A method of analysis of questionnaire results using principles from fuzzy mathematics and artificial intelligence is developed and demonstrated. Conclusions from the longitudinal study include the importance of early experiences in setting patterns for use for CIS, the persistence of patterns of use over time and the dominance of designed usage of the technology over emergent use.

An empirical investigation of the effect of rights issue announcements on share returns and the determinants of abnormal returns on the Kuala Lumpur Stock Exchange

This thesis examines the effect of rights issue announcements on stock prices by companies listed on the Kuala Lumpur Stock Exchange (KLSE) between 1987 to 1996. The emphasis is to report whether the KLSE is semi strongly efficient with respect to the announcement of rights issues and to check whether the implications of corporate finance theories on the effect of an event can be supported in the context of an emerging market. Once the effect is established, potential determinants of abnormal returns identified by previous empirical work and corporate financial theory are analysed. By examining 70 companies making clean rights issue announcements, this thesis will hopefully shed light on some important issues in long term corporate financing. Event study analysis is used to check on the efficiency of the Malaysian stock market; while cross-sectional regression analysis is executed to identify possible explanators of the rights issue announcements' effect. To ensure the results presented are not contaminated, econometric and statistical issues raised in both analyses have been taken into account. Given the small amount of empirical research conducted in this part of the world, the results of this study will hopefully be of use to investors, security analysts, corporate financial managements, regulators and policy makers as well as those who are interested in capital market based research of an emerging market. It is found that the Malaysian stock market is not semi strongly efficient since there exists a persistent non-zero abnormal return. This finding is not consistent with the hypothesis that security returns adjust rapidly to reflect new information. It may be possible that the result is influenced by the sample, consisting mainly of below average size companies which tend to be thinly traded. Nevertheless, these issues have been addressed. Another important issue which has emerged from the study is that there is some evidence to suggest that insider trading activity existed in this market. In addition to these findings, when the rights issue announcements' effect is compared to the implications of corporate finance theories in predicting the sign of abnormal returns, the signalling model, asymmetric information model, perfect substitution hypothesis and Scholes' information hypothesis cannot be supported.

The mechanical behaviour of cylindrical GRP panels

Glass reinforced plastic (GRP) is now an established material for the fabrication of sonar windows. Its good mechanical strength, light weight, resistance to corrosion and acoustic transparency, are all properties which fit it for this application. This thesis describes a study, undertaken at the Royal Naval Engineering College, Plymouth, into the mechanical behaviour of a circular cylindrical sonar panel. This particular type of panel would be used to cover a flank array sonar in a ship or submarine. The case considered is that of a panel with all of its edges mechanically clamped and subject to pressure loading on its convex surface. A comprehensive program of testing, to determine the orthotropic elastic properties of the laminated composite panel material is described, together with a series of pressure tests on 1:5 scale sonar panels. These pressure tests were carried out in a purpose designed test rig, using air pressure to provide simulated hydrostatic and hydrodynamic loading. Details of all instrumentation used in the experimental work are given in the thesis. The experimental results from the panel testing are compared with predictions of panel behaviour obtained from both the Galerkin solution of Flugge's cylindrical shell equations (orthotropic case), and finite element modelling of the panels using PAFEC. A variety of appropriate panel boundary conditions are considered in each case. A parametric study, intended to be of use as a preliminary design tool, and based on the above Galerkin solution, is also presented. This parametric study considers cases of boundary conditions, material properties, and panel geometry, outside of those investigated in the experimental work Final conclusions are drawn and recommendations made regarding possible improvements to the procedures for design, manufacture and fixing of sonar panels in the Royal Navy.

The response to and effects of microcomputers in the education sector:the introduction of an innovation in local authority secondary schools

The study addresses the introduction of an innovation of new technology into a bureaucratic profession. The organisational setting is that of local authority secondary schools at a time at which microcomputers were being introduced in both the organisational core (for teaching) and its periphery (school administration). The research studies innovation-adopting organisations within their sectoral context; key actors influencing the innovation are identified at the levels of central government, local government and schools.A review of the literature on new technology and innovation (including educational innovation), and on schools as organisations in a changing environment leads to the development of the conceptual framework of the study using a resource dependency model within a cycle of the acquisition, allocation and utilisation of financial, physical and intangible resources. The research methodology is longitudinal and draws from both positivist and interpretive traditions. lt includes an initial census of the two hundred secondary schools in four local education authorities, a final survey of the same population, and four case studies, using both interview methods and documentation. Two modes of innovation are discerned. In respect of administrative use a rationalising, controlling mode is identified, with local education authorities developing standardised computer-assisted administrative systems for use in schools. In respect of curricular use, in contrast, teachers have been able to maintain an indeterminate occupational knowledge base, derived from an ideology of professionalism in respect of the classroom use of the technology. The mode of innovation in respect of curricular use has been one of learning and enabling. The resourcing policies of central and local government agencies affect the extent of use of the technology for teaching purposes, but the way in which it is used is determined within individual schools, where staff with relevant technical expertise significantly affect the course of the innovation.

Evaluation and measurement of multiprocessor systems with shared memory

This study is concerned with several proposals concerning multiprocessor systems and with the various possible methods of evaluating such proposals. After a discussion of the advantages and disadvantages of several performance evaluation tools, the author decides that simulation is the only tool powerful enough to develop a model which would be of practical use, in the design, comparison and extension of systems. The main aims of the simulation package developed as part of this study are cost effectiveness, ease of use and generality. The methodology on which the simulation package is based is described in detail. The fundamental principles are that model design should reflect actual systems design, that measuring procedures should be carried out alongside design that models should be well documented and easily adaptable and that models should be dynamic. The simulation package itself is modular, and in this way reflects current design trends. This approach also aids documentation and ensures that the model is easily adaptable. It contains a skeleton structure and a library of segments which can be added to or directly swapped with segments of the skeleton structure, to form a model which fits a user's requirements. The study also contains the results of some experimental work carried out using the model, the first part of which tests• the model's capabilities by simulating a large operating system, the ICL George 3 system; the second part deals with general questions and some of the many proposals concerning multiprocessor systems.

Reacting and responding in TESOL Quarterly:a generic analysis of procedure and purpose in intertextual critical exchanges

A key feature of ‘TESOL Quarterly’, a leading journal in the world of TESOL/applied linguistics, is its ‘Forum’ section which invites ‘responses and rebuttals’ from readers to any of its articles. These ‘responses or rebuttals’ form the focus of this research. In the interchanges between readers reacting to earlier research articles in TESOL Quarterly and authors responding to the said reaction I – examine the texts for evidence of genre-driven structure, whether shared between both ‘reaction’ and ‘response’ sections, or peculiar to each section, and attempt to determine the precise nature of the intended communicative purpose in particular and the implications for academic debate in general. The intended contribution of this thesis is to provide an analysis of how authors of research articles and their critics pursue their efforts beyond the research article which precipitated these exchanges in order to be recognized by their discourse community as, in the terminology of Swales (1981:51), ‘Primary Knowers’. Awareness of any principled generic process identified in this thesis may be of significance to practitioners in the applied linguistics community in their quest to establish academic reputation and in their pursuit of professional development. These findings may also be of use in triggering productive community discussion as a result of the questions they raise concerning the present nature of academic debate. Looking beyond the construction and status of the texts themselves, I inquire into the kind of ideational and social organization such exchanges keep in place and examine an alternative view of interaction. This study breaks new ground in two major ways. To the best of my knowledge, it is the first exploration of a bipartite, intertextual structure laying claim to genre status. Secondly, in its recourse to the comments of the writers’ themselves rather than relying exclusively on the evidence of their texts, as is the case with most studies of genre, this thesis offers an expanded opportunity to discuss perhaps the most interesting aspects of genre analysis – the light it throws on social ends and the role of genre in determining the nature of current academic debate as it here emerges.

A dictionary of globalization

Globalization has become one of the most important topics within politics and economics. This new title explains some of the related terminology, summarizes the surrounding theories and examines the international organizations involved. With the proliferation of communications and the rise of the multi-national corporation, the concept of globalization is vitally important to the modern political environment. The structure of the modern economy, based on information production and diffusion, has made national boundaries largely irrelevant. A Dictionary of Globalization explains theories, philosophies and ideologies, and includes short biographies of leading activists, theorists and thinkers such as Noam Chomsky, Karl Marx and José Bové. Concepts, issues and terms key to the understanding of globalization also have clear and concise definitions, including democracy, civil society, non-governmental organizations and ethnicity. Cross-referenced for ease of use, this title aims to be of great benefit to anyone studying politics or sociology. It will prove essential to public and academic libraries, as well as to businesses, government departments, embassies and journalists.

Design of an expandable manufacturing simulator through the application of object-oriented principles

In analysing manufacturing systems, for either design or operational reasons, failure to account for the potentially significant dynamics could produce invalid results. There are many analysis techniques that can be used, however, simulation is unique in its ability to assess detailed, dynamic behaviour. The use of simulation to analyse manufacturing systems would therefore seem appropriate if not essential. Many simulation software products are available but their ease of use and scope of application vary greatly. This is illustrated at one extreme by simulators which offer rapid but limited application whilst at the other simulation languages which are extremely flexible but tedious to code. Given that a typical manufacturing engineer does not posses in depth programming and simulation skills then the use of simulators over simulation languages would seem a more appropriate choice. Whilst simulators offer ease of use their limited functionality may preclude their use in many applications. The construction of current simulators makes it difficult to amend or extend the functionality of the system to meet new challenges. Some simulators could even become obsolete as users, demand modelling functionality that reflects the latest manufacturing system design and operation concepts. This thesis examines the deficiencies in current simulation tools and considers whether they can be overcome by the application of object-oriented principles. Object-oriented techniques have gained in popularity in recent years and are seen as having the potential to overcome any of the problems traditionally associated with software construction. There are a number of key concepts that are exploited in the work described in this thesis: the use of object-oriented techniques to act as a framework for abstracting engineering concepts into a simulation tool and the ability to reuse and extend object-oriented software. It is argued that current object-oriented simulation tools are deficient and that in designing such tools, object -oriented techniques should be used not just for the creation of individual simulation objects but for the creation of the complete software. This results in the ability to construct an easy to use simulator that is not limited by its initial functionality. The thesis presents the design of an object-oriented data driven simulator which can be freely extended. Discussion and work is focused on discrete parts manufacture. The system developed retains the ease of use typical of data driven simulators. Whilst removing any limitation on its potential range of applications. Reference is given to additions made to the simulator by other developers not involved in the original software development. Particular emphasis is put on the requirements of the manufacturing engineer and the need for Ihe engineer to carrv out dynamic evaluations.

Bringing the High Seas into the Lab to Evaluate Speech Input Feasibility: A Case Study:SiMPE – 5th Workshop on Speech in Mobile and Pervasive Environments (part of ACM MobileHCI’2010)

As mobile technologies continue to penetrate increasingly diverse domains of use, we accordingly need to understand the feasibility of different interaction technologies across such varied domains. This case study describes an investigation into whether speechbased input is a feasible interaction option for use in a complex, and arguably extreme, environment of use – that is, lobster fishing vessels. We reflect on our approaches to bringing the “high seas” into lab environments for this purpose, comparing the results obtained via our lab and our field studies. Our hope is that the work presented here will go some way to enhancing the literature in terms of approaches to bringing complex real-world contexts into lab environments for the purpose of evaluating the feasibility of specific interaction technologies.

A comparison of microphone and speech recognition engine efficacy for mobile data entry

The research presented in this paper is part of an ongoing investigation into how best to incorporate speech-based input within mobile data collection applications. In our previous work [1], we evaluated the ability of a single speech recognition engine to support accurate, mobile, speech-based data input. Here, we build on our previous research to compare the achievable speaker-independent accuracy rates of a variety of speech recognition engines; we also consider the relative effectiveness of different speech recognition engine and microphone pairings in terms of their ability to support accurate text entry under realistic mobile conditions of use. Our intent is to provide some initial empirical data derived from mobile, user-based evaluations to support technological decisions faced by developers of mobile applications that would benefit from, or require, speech-based data entry facilities.

Speech recognition use in healthcare applications

Speech recognition technology is regarded as a key enabler for increasing the usability of applications deployed on mobile devices -- devices which are becoming increasingly prevalent in modern hospital-based healthcare. Although the use of speech recognition is not new to the hospital-based healthcare domain, its use with mobile devices has thus far been limited. This paper presents the results of a literature review we conducted in order to observe the manner in which speech recognition technology has been used in hospital-based healthcare and to gain an understanding of how this technology is being evaluated, in terms of its dependability and reliability, in healthcare settings. Our intent is that this review will help identify scope for future uses of speech recognition technologies in the healthcare domain, as well as to identify implications for the meaningful evaluation of such technologies given the specific context of use.

Strategy as practice:recursiveness, adaptation, and practices-in-use

In this article, a social theory framework is developed to explain the common themes of recursive and adaptive practice underpinning the existing strategic management literature. In practice, there is a coexistent tension between recursive and adaptive forms of strategic action that spans multiple levels from macro-institutional and competitive contexts to within-firm levels of analysis to individual cognition. This tension may be better understood by examining how management practices are used to put strategy into practice. Such practices span multiple levels of context and are adaptable to their circumstances of use, serving to highlight both general characteristics and localized idiosyncrasies of strategy as practice. The article develops the concept of management practices-in-use into a research agenda and nine broad research questions that may be used to investigate empirically strategy as practice.

Bringing the High Seas into the Lab to Evaluate Speech Input Feasibility: A Case Study : SiMPE – 5th Workshop on Speech in Mobile and Pervasive Environments (part of ACM MobileHCI’2010)

As mobile technologies continue to penetrate increasingly diverse domains of use, we accordingly need to understand the feasibility of different interaction technologies across such varied domains. This case study describes an investigation into whether speechbased input is a feasible interaction option for use in a complex, and arguably extreme, environment of use – that is, lobster fishing vessels. We reflect on our approaches to bringing the “high seas” into lab environments for this purpose, comparing the results obtained via our lab and our field studies. Our hope is that the work presented here will go some way to enhancing the literature in terms of approaches to bringing complex real-world contexts into lab environments for the purpose of evaluating the feasibility of specific interaction technologies.

An investigation into the acceptance of online banking in Saudi Arabia

Although a regional leader, Internet banking in Saudi Arabia is yet to be fully utilised as a value-adding tool to improve customer relationships and achieve cost advantages. The aim of this study was to identify the factors that encourage customers to adopt online banking in Saudi Arabia. The research constructs were developed based on the technology acceptance model (TAM) and incorporated some extra important control variables. The model was empirically verified to examine the factors influencing the online banking adoption behaviour of 400 customers. The findings of the study suggests that the quality of the Internet connection, the awareness of online banking and its benefits, the social influence and computer self-efficacy have significant effects on the perceived usefulness (PU) and perceived ease of use (PEOU) of online banking acceptance. Education, trust and resistance to change also have significant impact on the attitude towards the likelihood of adopting online banking. The implications of the findings are discussed and suggestions for future research are presented.