Wannier-function approach to electron states in superlattices under an electric field

Electron quasi-stationary states in a periodic semiconductor superlattice are calculated, as linear combinations of Wannier-Kohn functions, for different values of an electric field applied along the heterostructure. A comparison with an alternative approach, which is based on the localization of quasi-stationary states, is performed. (C) 2004 Elsevier Ltd. All rights reserved.

DFT study of alpha-alanine as a function of the medium polarity

The zwitterionic (Z) form, neutral (N) form and transition structure (TS) connecting N to Z, have been studied at the B3LYP/6-31++G** level of calculation by using the SCRF methodology. The intramolecular proton transfer from oxygen to nitrogen atoms of alpha -alanine and vibrational spectrum were analyzed in the different environments employed: acetonitrile, ethanol, carbon tetrachloride and gas phase. The Z species is a stationary point in acetonitrile and ethanol, but not in carbon tetrachloride and gas phase media. The geometry of N, Z and TS was similar in acetonitrile and ethanol. The vibrational spectrum of Z was similar in the two solvents studied. (C) 2001 Elsevier B.V. B.V. All lights reserved.

Optimal reactive power flow via the modified barrier Lagrangian function approach

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Expressão imuno-histoquimica de colagenase-1 e gelatinases A e B em mixomas odontogênicos e papilas de germes dentários

The odontogenic myxoma shares cellular and structural aspects with dental papilla, which has been implicated as probable origin of this neoplasm. The aim of the present study was to perform a comparative immunohistochemical analysis for the expression of collagenase-1 (MMP-1) and gelatinases A (MMP-2) and B (MMP-9) in odontogenic myxomas and dental papilla of teeth germs. Twelve cases of odontogenic myxomas and eight specimens of teeth germs were selected. It was taken into consideration the presence or absence of immunoreactivity, the pattern of immunohistochemical distribution of proteases within extracellular matrix, as well as, the number of cells revealing immunostaining for matrix metalloproteinases (MMPs). It was verified a significant difference (p<0,05) in relation to MMP-2 immunoexpression, which was observed only within extracellular matrix of myxomas. Nevertheless, MMP-1 labeling was revealed by most of the cases of odontogenic myxoma, at levels close to those observed in dental papilla. In relation to the pattern of distribution, a significant difference was obtained between specimens (p<0,05), with neoplasms predominantly exhibiting a focal pattern for MMP-1. The quantitative analysis of neoplastic cells labeled for MMPs denoted a significant difference (p<0,05), demonstrating a higher proportion of MMP-1 in comparison to MMPs-2 and -9. It can be concluded that immunohistochemical expression of MMP-1 at levels comparable to those observed in dental papilla and quantitatively superior in relation to MMPs-2 and -9, suggest an implication of this protease on extracellular matrix degradation of odontogenic myxomas. Moreover, the possibility of interactions with receptors involved in cellular adhesion, particularly with integrins, suggests a plausible function on local invasiveness of such neoplasms. Additionally, the presence of a descent immunoexpression gradient for these MMPs on odontogenic myxomas, associated to substrate specificity inherent in each enzyme, suggest the existence of a coordinated mechanism between interstitial collagenase and gelatinases A and B in order to allow an efficient degradation of extracellular matrix and local invasion by neoplastic cells

Efeito de aditivos no valor nutritivo de silagens feitas com subproduto da extração do palmito de pupunha (Bactris gasipaes H.B.K.)

O objetivo deste experimento foi determinar a qualidade e o valor nutritivo de silagens do subproduto da pupunha, produzidas com aditivos, conforme os tratamentos: T1 - Testemunha (sem aditivo); T2 - Adição de 2,5% de açúcar; T3 - Adição de 10,0% de polpa cítrica e T4 - Adição de 10,0% de milho moído, base da matéria natural. Verificou-se que a adição 10% de polpa cítrica (PC) ou milho moído (MM) elevou o teor de matéria seca da massa a ser ensilada, bem como da silagem, em 6,5 e 8,0 unidades percentuais, respectivamente. Silagens com aditivos apresentaram menores valores de nitrogênio amoniacal (N-NH3 / NT) e pH. O consumo de matéria seca foi maior para as silagens feitas com PC ou MM, atingindo 85 g/kg PV0,75 ou 2,1% do PV, contra 44,7 g/kgPV0,75 ou 1,12%, para as silagens sem aditivo ou com 2,5% de açúcar. O coeficiente de digestibilidade aparente da matéria seca, também foi superior para as silagens contendo 10% de PC ou MM (65,0%) em relação à média das demais (52,0%). A digestibilidade da parede celular não mostrou tendência definida em função dos tratamentos. A silagem de subproduto da pupunha feita com a adição de 10% de polpa cítrica ou milho moído, apresentou valor nutritivo semelhante às silagens de forrageiras convencionais.

Pole placement method using the system matrix transfer function and sparsity

This paper presents a pole placement method using both the augmented Jacobian and the corresponding system transfer function matrices. From the manipulation of these matrices a straightforward approach results to get the coefficients of a non-linear system, whose solution gives the parameters of the stabilizers that can provide a pre-specified minimum damping to the system. (C) 2001 Elsevier B.V. Ltd. All rights reserved.

Morphology variation as a function of composition for blends of PVDF and a polyaniline derivative

Blends of poly(vinylidene fluoride), PVDF, and poly(o-methoxyaniline), POMA doped with toluene sulfonic acid, TSA, were prepared by casting at various compositions and studied by scanning electron microscopy, X-ray diffraction and differential scanning calorimetry. The blend composition has a great influence on the morphology obtained. As the concentration of POMA-TSA is increased in the blend an interconnecting fibrillar-like morphology is formed and the spherulites characteristic of pure PVDF are destroyed. The variation of blend morphology is further discussed based on X-ray diffraction and differential scanning calorimetry analysis. (C) 1998 Elsevier B.V. Ltd. All rights reserved.

The temperature coefficient of the optical path length as a function of the temperature in different optical glasses

An interferometric technique was used to determine the temperature coefficient of the optical path length (dS/dT) as a function of the temperature in several optical glasses. The temperature range was between 25degreesC and 180degreesC. The studied samples included undoped and doped oxide glasses, such as low silica calcium aluminosilicate, phosphates, borates and also chalcogenides. The oxide glasses had dS/dT between 10 X 10(-6) K-1 and 20x10(-6) K-1, while for the chalcogenides, these were around 70 x 10(-6)K(-1). The results showed that dS/dTs increased with the temperature in all samples. For samples doped with Nd the dS/dT values were found to be independent of concentration. on the other hand, for the phosphate glass doped with Cr, dS/dT increased about 5% when compared with the Nd doped one. In conclusion, the used interferometric method, which is a considerably simpler and a lower cost technique, and is a useful tool to measure dS/dT in semi-transparent glasses as a function of the composition and temperature. (C) 2004 Elsevier B.V. All rights reserved.

Quantitative comparison of mobility and gross motor function in Brazilian children with cerebral palsy

Background: Cerebral palsy (CP) presents changes in posture and movement as a core characteristic, which requires therapeutic monitoring during the habilitation or rehabilitation of children. Besides clinical treatment, it is fundamental that professionals use systems of evaluation to quantify the difficulties presented to the individual and assist in the organization of a therapeutic program. The aim of this study was to quantitatively verify the performance of children with spastic di-paresia type CP.Methods: The Pediatric Evaluation of Disability Inventory (PEDI) and Gross Motor Function Classification System (GMFM) tests were used and classification made through the GMFCS in the assessment of 7 patients with CP, 4 females and 3 males, average age of 9 years old.Results: According to GMFCS scales, 17% (n=1) were level II and 83% (n=6) were level III. The PEDI test and 88 GMFM items were used in the area of mobility. We observed that there was high correlation between mobility and gross motor function with Pearson's correlation coefficient =0.929) showing the likely impact of these areas in the functional skills and the quality of life of these patients.Conclusion: We suggest the impact of the limitation of the areas in functional skills and quality of life of these patients.

Especificação do micronúcleo FreeRTOS utilizando o método B

This paper presents a contribution to the international Verified Software Repository effort through the formal specification of the microkernel FreeRTOS real-time system. Such specification was made in abstract level making use of the B method . For thus, properties of the microkernel were chosen and selected as specification requisites, which was constructed centered at the functionalities responsible for the utilization of these properties. This properties weres setting as specification requirements. The specification was constructed modeling the function of microkernel that implement this properties. This work intended to encourage the formal verification of FreeRTOS and also contribute to the formal creation of a microkernel real-time systems, based in FreeRTOS. Furthermore, this model brings a formal documentation point view of the microkernel, demonstrating features and how this internal states is changing. Finally, this work could be an example of specification of the actual system by the B method.

NF-kappa B signaling modulation by EBV and KSHV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ovarian function in cows submitted to acute stress during proestrus

Studies in which ACTH was administrated in heifers after the occurrence of luteolysis showed a delay in the onset of estrus and the estrus duration was shortened. This study evaluated the effect of acute stress by road transportation on estrous behavior and ovulation, monitored by serum progesterone and cortisol concentrations in cows at the periovulatory period, using a crossover design. Eleven crossbred cows, divided into Control and Transport groups had their estrus cycle synchronized with GnRH, an intravaginal progesterone device, and cloprostenol. Thirty hours after withdrawal of the device, the animals of the Transport group were transported for 60 min by truck and those from the Control group remained at pasture. Ovarian ultrasound examination was performed every 12 h from device withdrawal until ovulation in every cow. From the day after removal of the device until ovulation estrous behavior was monitored 24 h a day. Blood samples for serum cortisol and progesterone concentrations were taken at -90, -60, 0, 30, 60 and 180 min in relation to the end of transportation. Transportation during the estrous period induced stress in cows as reflected by changes in serum concentrations of progesterone and cortisol. However, we did not detect impairment in estrus expression, estrus duration or ovulation (P>0.05). (C) 2010 Elsevier B.V. All rights reserved.

Recovering the function and esthetics of fractured teeth using several restorative cosmetic approaches. Three clinical cases

The teeth most commonly affected by trauma are the maxillary central incisors. The most frequent types of traumatic dental injuries to permanent teeth are enamel fractures, enamel and dentine fractures, and enamel and dentine fractures with pulp involvement. This article describes three clinical cases with different levels of traumatized maxillary incisors and several cosmetic approaches for recovery of the esthetics and the masticatory function, as well as the social/psychological aspects of treatment. All cases involved young adult men. The three clinical cases involve dentin and enamel fractures, dentin and enamel fractures with pulp exposure, and dentin and enamel fractures with pulp exposure associated with root fracture. The cosmetic treatments used to resolve fractures were direct composite resin by layering technique, indirect all-ceramic restorations (laminate veneer and ceramic crowns over the teeth), and immediate implant after extraction followed by immediate loading (ceramic abutments with ceramic crown over implant). In all three cases, excellent functional and esthetic results were achieved by use of these treatment modalities. The patients were very satisfied with the results.