A Bootstrap-Regression Procedure to Capture Unit Specific Effects in Data Envelopment Analysis

The Data Envelopment Analysis (DEA) efficiency score obtained for an individual firm is a point estimate without any confidence interval around it. In recent years, researchers have resorted to bootstrapping in order to generate empirical distributions of efficiency scores. This procedure assumes that all firms have the same probability of getting an efficiency score from any specified interval within the [0,1] range. We propose a bootstrap procedure that empirically generates the conditional distribution of efficiency for each individual firm given systematic factors that influence its efficiency. Instead of resampling directly from the pooled DEA scores, we first regress these scores on a set of explanatory variables not included at the DEA stage and bootstrap the residuals from this regression. These pseudo-efficiency scores incorporate the systematic effects of unit-specific factors along with the contribution of the randomly drawn residual. Data from the U.S. airline industry are utilized in an empirical application.

A standard operation procedure and a pilot water testing for herbicides in northwest Harris County, Texas

Herbicides are used to control the growth of weeds along highways, power lines, and many other urban locations. Exposure to herbicides has been linked to adverse health outcomes. This study was initiated to pretest for the presence of herbicides in multiple water sources near intersections in a corridor in the Northwest Harris County (specifically in the Highway 6/FM 1960, North Freeway 45, US 290 and S 99 corridor). Roadside water and tap water samples were collected and analyzed for herbicides using the established Environmental Protection Agency (EPA) Method 515.4: "Determination of Chlorinated Acids in Drinking Water by Liquid-Liquid Micro-extraction, Derivatization, and Fast Gas Chromatography with Electron Capture Detection." A standard operating procedure (adapted from the US EPA Method 515.4) was developed for subsequent, larger studies of environmental fate of herbicides and non-occupational exposure risks. Preliminary testing of 16 water samples was performed to pretest the existence of trace herbicides; all concentrations that were greater than the minimum reporting limits of each analyte are reported with a 99 percent confidence. This study failed to find concentrations above the limits of detection of the method in any of the samples collected on June 15, 2008. However, this does not indicate that the waters around the NW Harris County are free of herbicides and metabolites. A larger and repeated sampling in the region would be necessary to make that claim. ^

Procedure for the identification of population characteristics for targeting intervention services on the basis of outcome-goal priorities: Case management services for the chronic mentally ill

Although the processes involved in rational patient targeting may be obvious for certain services, for others, both the appropriate sub-populations to receive services and the procedures to be used for their identification may be unclear. This project was designed to address several research questions which arise in the attempt to deliver appropriate services to specific populations. The related difficulties are particularly evident for those interventions about which findings regarding effectiveness are conflicting. When an intervention clearly is not beneficial (or is dangerous) to a large, diverse population, consensus regarding withholding the intervention from dissemination can easily be reached. When findings are ambiguous, however, conclusions may be impossible.^ When characteristics of patients likely to benefit from an intervention are not obvious, and when the intervention is not significantly invasive or dangerous, the strategy proposed herein may be used to identify specific characteristics of sub-populations which may benefit from the intervention. The identification of these populations may be used both in further informing decisions regarding distribution of the intervention and for purposes of planning implementation of the intervention by identifying specific target populations for service delivery.^ This project explores a method for identifying such sub-populations through the use of related datasets generated from clinical trials conducted to test the effectiveness of an intervention. The method is specified in detail and tested using the example intervention of case management for outpatient treatment of populations with chronic mental illness. These analyses were applied in order to identify any characteristics which distinguish specific sub-populations who are more likely to benefit from case management service, despite conflicting findings regarding its effectiveness for the aggregate population, as reported in the body of related research. However, in addition to a limited set of characteristics associated with benefit, the findings generated, a larger set of characteristics of patients likely to experience greater improvement without intervention. ^

INTAKE VARIABLES AS PREDICTORS OF ASSESSMENT AND REFERRAL PROCEDURE OUTCOMES IN EMPLOYEE ASSISTANCE PROGRAMS

While reported prevalence rates of troubled employees vary considerably, even conservative estimates indicate a major public health problem. For example, alcohol and drug related problems alone cost U.S. industry more than 45 billion dollars annually.^ Of the alternatives available to deal with these problems, e.g., dismissal or disciplinary actions, the most viable and cost effective are employee assistance programs (EAP), designed to provide professional assistance to employees experiencing alcohol, drug, emotional or personal crisis.^ The principal component of an EAP is that of assessment and referral, and this study was developed to determine which EAP client intake variables are the most efficacious predictors of assessment and referral procedures.^ Although, specific client intake variables were statistically significant the discriminant classification analysis was demonstrably inadequate. Nevertheless, the identification of A/R procedure phases which were not efficacious, as well as EAP client populations for whom services were not effective, were extremely valuable discernments. Identifying the less efficacious components of the A/R process provided an opportunity to recommend alternatives to current program procedures and practices, which may ameliorate program effectiveness. ^

Development of a standard sign-out procedure for clinicians in a pediatric intensive care unit

Background: Poor communication among health care providers is cited as the most common cause of sentinel events involving patients. Sign-out of patient data at the change of clinician shifts is a component of communication that is especially vulnerable to errors. Sign-outs are particularly extensive and complex in intensive care units (ICUs). There is a paucity of validated tools to assess ICU sign-outs. ^ Objective: To design a valid and reliable survey tool to assess the perceptions of Pediatric ICU (PICU) clinicians about sign-out. ^ Design: Cross-sectional, web-based survey ^ Setting: Academic hospital, 31-bed PICU ^ Subjects: Attending faculty, fellows, nurse practitioners and physician assistants. ^ Interventions: A survey was designed with input from a focus group and administered to PICU clinicians. Test-retest reliability, internal consistency and validity of the survey tool were assessed. ^ Measurements and Main Results: Forty-eight PICU clinicians agreed to participate. We had 42(88%) and 40(83%) responses in the test and retest phases. The mean scores for the ten survey items ranged from 2.79 to 3.67 on a five point Likert scale with no significant test-retest difference and a Pearson correlation between pre and post answers of 0.65. The survey item scores showed internal consistency with a Cronbach's Alpha of 0.85. Exploratory factor analysis revealed three constructs: efficacy of sign-out process, recipient satisfaction and content applicability. Seventy eight % clinicians affirmed the need for improvement of the sign-out process and 83% confirmed the need for face- to-face verbal sign-out. A system-based sign-out format was favored by fellows and advanced level practitioners while attendings preferred a problem-based format (p=0.003). ^ Conclusions: We developed a valid and reliable survey to assess clinician perceptions about the ICU sign-out process. These results can be used to design a verbal template to improve and standardize the sign-out process.^

The dynamic evaluation of the learning potential: a procedure

Fil: Malbrán, María del Carmen. Universidad Nacional de La Plata. Facultad de Humanidades y Ciencias de la Educación; Argentina.

The dynamic evaluation of the learning potential: a procedure

Fil: Malbrán, María del Carmen. Universidad Nacional de La Plata. Facultad de Humanidades y Ciencias de la Educación; Argentina.

Analysis of the Fracture of Reinforced Concrete Flat Elements Subjected to Explosions. Experimental Procedure and Numerical Validation

Many of the material models most frequently used for the numerical simulation of the behavior of concrete when subjected to high strain rates have been originally developed for the simulation of ballistic impact. Therefore, they are plasticity-based models in which the compressive behavior is modeled in a complex way, while their tensile failure criterion is of a rather simpler nature. As concrete elements usually fail in tensión when subjected to blast loading, available concrete material models for high strain rates may not represent accurately their real behavior. In this research work an experimental program of reinforced concrete fíat elements subjected to blast load is presented. Altogether four detonation tests are conducted, in which 12 slabs of two different concrete types are subjected to the same blast load. The results of the experimental program are then used for the development and adjustment of numerical tools needed in the modeling of concrete elements subjected to blast.

Simplified Procedure for the Nonlinear Seismic Analysis of Bridges

The severe accidents suffered by bridges during recent earthquake show that more careful analysis are needed to guarantee their behaviour. In particular simplified non-linear analysis could be useful to bridge the gap between theoretical research and practical applications. This paper presents one of those simplified methods that can be applied for first designs or to retrofitting of groups of bridges.

A robust procedure for damage detection from strain measurements based on principal component analysis

FBGs are excellent strain sensors, because of its low size and multiplexing capability. Tens to hundred of sensors may be embedded into a structure, as it has already been demonstrated. Nevertheless, they only afford strain measurements at local points, so unless the damage affects the strain readings in a distinguishable manner, damage will go undetected. This paper show the experimental results obtained on the wing of a UAV, instrumented with 32 FBGs, before and after small damages were introduced. The PCA algorithm was able to distinguish the damage cases, even for small cracks. Principal Component Analysis (PCA) is a technique of multivariable analysis to reduce a complex data set to a lower dimension and reveal some hidden patterns that underlie.

Procedure for verification of sound source coverage over façades according to the International Standard ISO 140-5

This paper presents a new verification procedure for sound source coverage according to ISO 140?5 requirements. The ISO 140?5 standard applies to the measurement of façade insulation and requires a sound source able to achieve a sufficiently uniform sound field in free field conditions on the façade under study. The proposed method involves the electroacoustic characterisation of the sound source in laboratory free field conditions (anechoic room) and the subsequent prediction by computer simulation of the sound free field radiated on a rectangular surface equal in size to the façade being measured. The loudspeaker is characterised in an anechoic room under laboratory controlled conditions, carefully measuring directivity, and then a computer model is designed to calculate the acoustic free field coverage for different loudspeaker positions and façade sizes. For each sound source position, the method provides the maximum direct acoustic level differences on a façade specimen and therefore determines whether the loudspeaker verifies the maximum allowed level difference of 5 dB (or 10 dB for façade dimensions greater than 5 m) required by the ISO standard. Additionally, the maximum horizontal dimension of the façade meeting the standard is calculated and provided for each sound source position, both with the 5 dB and 10 dB criteria. In the last section of the paper, the proposed procedure is compared with another method used by the authors in the past to achieve the same purpose: in situ outdoor measurements attempting to recreate free field conditions. From this comparison, it is concluded that the proposed method is able to reproduce the actual measurements with high accuracy, for example, the ground reflection effect, at least at low frequencies, which is difficult to avoid in the outdoor measurement method, and it is fully eliminated with the proposed method to achieve the free field requisite.

A FEM-BEM coupling procedure through the Steklov-Poincarè operator

Many advantages can be got in combining finite and boundary elements.It is the case, for example, of unbounded field problems where boundary elements can provide the appropriate conditions to represent the infinite domain while finite elements are suitable for more complex properties in the near domain. However, in spite of it, other disadvantages can appear. It would be, for instance, the loss of symmetry in the finite elements stiffness matrix, when the combination is made. On the other hand, in our days, with the strong irruption of the parallel proccessing the techniques of decomposition of domains are getting the interest of numerous scientists. With their application it is possible to separate the resolution of a problem into several subproblems. That would be beneficial in the combinations BEM-FEM as the loss of symmetry would be avoided and every technique would be applicated separately. Evidently for the correct application of these techniques it is necessary to establish the suitable transmission conditions in the interface between BEM domain and FEM domain. In this paper, one parallel method is presented which is based in the interface operator of Steklov Poincarè.

Identification procedure of mealy apples by instrumental means. Extraction of storage features.

Mealiness is a negative attribute of sensory texture that combines the sensation of a disaggregated tissue with the sensation of lack of juiciness. Since January 1996, a wide EC Project entitled : "Mealiness in fruits. Consumers perception and means for detection'" is being carried out. Within it, three sensory panels have been trained at : the Institute of Food Research (IFR, United Kingdom), the Instituto de Agroquímica y Tecnología de los Alimentos (IATA, Spain) and the Institut voor Agrotechnologisch Onderzoek (ATO-DLO, Netherlands) to assess mealiness in apples. In all three cases, mealiness has been described as a multidimensional sensory descriptor capable of gathering the loss of consistency (of crispness and of hardness) and of juiciness. Also within the EC Project several instrumental procedures have been tested for mealiness assessment. In this sense the Physical Properties Laboratory (ETS1A-UPM) has focused its aims in a first stage on performing instrumental tests for assessing some textural descriptors as crispiness, hardness and juiciness. The results obtained within these tests have shown to correlate well with the sensory measurements (Barreiro et Ruiz-Altisent, 1997) in apples, but also have succeed when trying to generate several texture degradation levels on peaches from which mealiness appears to be the last stage (Ortiz et al. 1997).