An intelligent system to detect drilling problems through drilled cuttings return analysis

Cuttings return analysis is an important tool to detect and prevent problems during the petroleum well drilling process. Several measurements and tools have been developed for drilling problems detection, including mud logging, PWD and downhole torque information. Cuttings flow meters were developed in the past to provide information regarding cuttings return at the shale shakers. Their use, however, significantly impact the operation including rig space issues, interferences in geological analysis besides, additional personel required. This article proposes a non intrusive system to analyze the cuttings concentration at the shale shakers, which can indicate problems during drilling process, such as landslide, the collapse of the well borehole walls. Cuttings images are acquired by a high definition camera installed above the shakers and sent to a computer coupled with a data analysis system which aims the quantification and closure of a cuttings material balance in the well surface system domain. No additional people at the rigsite are required to operate the system. Modern Artificial intelligence techniques are used for pattern recognition and data analysis. Techniques include the Optimum-Path Forest (OPF), Artificial Neural Network using Multilayer Perceptrons (ANN-MLP), Support Vector Machines (SVM) and a Bayesian Classifier (BC). Field test results conducted on offshore floating vessels are presented. Results show the robustness of the proposed system, which can be also integrated with other data to improve the efficiency of drilling problems detection. Copyright 2010, IADC/SPE Drilling Conference and Exhibition.

A methodological approach to gender analysis in natural disaster assessment: a guide for the Caribbean

Includes bibliography

Methodology analysis of a computational tool used in electronic circuit design

This paper considers the importance of using a top-down methodology and suitable CAD tools in the development of electronic circuits. The paper presents an evaluation of the methodology used in a computational tool created to support the synthesis of digital to analog converter models by translating between different tools used in a wide variety of applications. This tool is named MS 2SV and works directly with the following two commercial tools: MATLAB/Simulink and SystemVision. Model translation of an electronic circuit is achieved by translating a mixed-signal block diagram developed in Simulink into a lower level of abstraction in VHDL-AMS and the simulation project support structure in SystemVision. The method validation was performed by analyzing the power spectral of the signal obtained by the discrete Fourier transform of a digital to analog converter simulation model. © 2011 IEEE.

Harmonic propagation analysis in electric energy distribution systems

An important alteration of the equivalent loads profile has been observed in the electrical energy distribution systems, for the last years. Such fact is due to the significant increment of the electronic processors of electric energy that, in general, behave as nonlinear loads, generating harmonic distortions in the currents and voltages along the electric network. The effects of these nonlinear loads, even if they are concentrated in specific sections of the network, are present along the branch circuits, affecting the behavior of the entire electric network. For the evaluation of this phenomenon it is necessary the analysis of the harmonic currents flow and the understanding of the causes and effects of the consequent voltage harmonic distortions. The usual tools for calculation the harmonic flow consider one-line equivalent networks, balanced and symmetrical systems. Therefore, they are not tools appropriate for analysis of the operation and the influence/interaction of mitigation elements. In this context, this work proposes the development of a computational tool for the analysis of the three-phase harmonic propagation using Norton modified models and considering the real nature of unbalanced electric systems operation. © 2011 IEEE.

Power Electronics course: Analysis and evaluation of the educational software and the environment learning

This paper presents the analysis and evaluation of the Power Electronics course at So Paulo State University-UNESP-Campus of Ilha Solteira(SP)-Brazil, which includes the usage of interactive Java simulations tools and an educational software to aid the teaching of power electronic converters. This platform serves as an oriented course for the lectures and supplementary support for laboratory experiments in the power electronics courses. The simulation tools provide an interactive and dynamic way to visualize the power electronics converters behavior together with the educational software, which contemplates the theory and a list of subjects for circuit simulations. In order to verify the performance and the effectiveness of the proposed interactive educational platform, it is presented a statistical analysis considering the last three years. © 2011 IEEE.

Analysis on turning Ti-6Al-4V with different cooling methods

The aim of this paper is to optimize the machining of Ti-6Al-4V alloy, by studying the chip formation, roughness and tool wear for different cooling conditions. The results were compared between cooling methods, minimal quantity of fluid (MQF) and flooding, and also without fluid for the tool H13A. The turning of Ti-6Al-4V has shown good results on roughness (0, 8μm) and tool life, which was 11% lower with MQF than with the flooding method. The tool wear causes variation of the shear angle, which promotes strength hardening of the chip. As a result, the machined surface could be damaged. The use of the cutting fluid helps to save the cutting edge and could reduce the strength hardening. Nevertheless, it could also facilitate the formation of built-up edge. The nucleation of alpha lamellar colonies can occur due to a combination of deformation rates and temperature, mainly when the flooding is used, but it's not conclusive. The lamellar colonies were also found with the MQF in some regions, however, this structure did not show hardness variation compared to equiaxial. For all this reasons, the machining parameters might be carefully chosen.

Outbreak of fungemia caused by Candida parapsilosis in a neonatal intensive care unit: Molecular investigation through microsatellite analysis

Background: Opportunistic infections are an increasingly common problem in hospitals, and the yeast Candida parapsilosis has emerged as an important nosocomial pathogen, especially in neonatal intensive care units (NICUs) where it has been responsible for outbreak cases. Risk factors for C. parapsilosis infection in neonates include prematurity, very low birth weight, prolonged hospitalization, indwelling central venous catheters, hyperalimentation, intravenous fatty emulsions and broad spectrum antibiotic therapy. Molecular methods are widely used to elucidate these hospital outbreaks, establishing genetic variations among strains of yeast. Aims: The aim of this study was to detect an outbreak of C. parapsilosis in an NICU at the Hospital das Clinicas , Faculty of Medicine of Botucatu, a tertiary hospital located in São Paulo, Brazil, using the molecular genotyping by the microsatellite markers analysis. Methods: A total of 11 cases of fungemia caused by C. parapsilosis were identified during a period of 43 days in the NICU. To confirm the outbreak all strains were molecularly typed using the technique of microsatellites. Results: Out of the 11 yeast samples studied, nine showed the same genotypic profile using the technique of microsatellites. Conclusions: Our study shows that the technique of microsatellites can be useful for these purposes. In conclusion, we detected the presence of an outbreak of C. parapsilosis in the NICU of the hospital analyzed, emphasizing the importance of using molecular tools, for the early detection of hospital outbreaks, and for the introduction of effective preventive measures, especially in NICUs. © 2012 Revista Iberoamericana de Micología.

The use of Gramian matrices for aeroelastic stability analysis

Most of the established procedures for analysis of aeroelastic flutter in the development of aircraft are based on frequency domain methods. Proposing new methodologies in this field is always a challenge, because the new methods need to be validated by many experimental procedures. With the interest for new flight control systems and nonlinear behavior of aeroelastic structures, other strategies may be necessary to complete the analysis of such systems. If the aeroelastic model can be written in time domain, using state-space formulation, for instance, then many of the tools used in stability analysis of dynamic systems may be used to help providing an insight into the aeroelastic phenomenon. In this respect, this paper presents a discussion on the use of Gramian matrices to determine conditions of aeroelastic flutter. The main goal of this work is to introduce how observability gramian matrix can be used to identify the system instability. To explain the approach, the theory is outlined and simulations are carried out on two benchmark problems. Results are compared with classical methods to validate the approach and a reduction of computational time is obtained for the second example. © 2013 Douglas Domingues Bueno et al.

A critical analysis of the ubiquity of linear local-regional richness relationships

Synthesis Despite theoretical criticisms, the ubiquity of linear relationships between local and regional species richness has long been used to justify it as a valid framework to conclude that local communities are not saturated with species. However, we reanalyzed published studies with a new unbiased method and found no prevalence of linear relationships and more than 40% of misclassifications, including textbook examples. We thus conclude that the prevailing argument in favor of associating a valid ecological interpretation to local-regional species richness plots, its ubiquity, is not sustained, and that ecologists could use for instance metacommunity theory to make inference on the strength of local and regional processes. Identifying the relative importance of regional and local processes to local species diversity is a central issue to many questions in basic and applied ecology. One widely-used method is to plot local species richness against its regional richness to infer whether regional or local processes determine local diversity. However, this method increases the tendency to find regional prevalence as suggested by a recent simulation. We reanalyzed studies in the literature with an unbiased method and found no prevalence of either regional or local processes. In addition, almost 40% of the studies and 50% of the ecology textbook examples using the traditional method were misclassified. Our findings reinforce the need of alternative, novel tools identified by for instance metacommunity theory to go beyond the studies of local-regional relationships in the ecological literature that focus on the interdependence of regional and local processes.© 2013 The Authors. Oikos © 2013 Nordic Society Oikos.

Different tools for estimating cardiovascular risk in Brazilian postmenopausal women

Objective: To compare estimation of cardiovascular risk using the Framinghan Risk Score (FRS) and the presence of the metabolic syndrome (MetS) in postmenopausal women to prevent primary cardiovascular disease (CVD). Methods: This cross-sectional study included 497 Brazilian women (aged 45 years and amenorrhea >12months). Cardiovascular risk was calculated using the FRS that includes age, total cholesterol, HDL, systolic blood pressure and smoking status. Women showing three or more of the following criteria were diagnosed with MetS: waist circumference (WC) >88cm, blood pressure 130/85mmHg, triglycerides 150mg/dl, HDL<50mg/dl and glucose 100mg/dl. For statistical analysis, the Chi-square, Fisher's exact, and logistic regression (odds ratio-OR) were used. Results: The mean age was 55.3±7.0 years and time since menopause 7.2±5.9 years. Based on FRS, 72.4% of women were classified as low-risk, 16.5% moderate risk and 11.1% a high-risk. MetS was identified in 40% of the women, and 46.2% were considered of moderate risk for CVD, while 84.9% of those without MetS were classified as low-risk (p<0.001). The risk for CVD increased significantly with age at menopause (OR1.10; 95% CI, 1.04-1.17), time since menopause (OR1.13; 95% CI, 1.08-1.18), elevated triglycerides (OR1.03; 95% CI, 1.0-1.10) and presence of MetS (OR1.72; 95% CI 1.48-1.84). Conclusions: By using only FRS to estimate cardiovascular risk, a substantial number of postmenopausal women showing evidence of MetS were not identified, even though women with MetS are at higher risk of CVD. © 2013 Informa UK Ltd.

Análise por técnica de RDA (Representational Difference Analysis) da expressão gênica diferencial, para a identificação de fatores genéticos associados à produção de etanol em linhagem de Saccharomyces cerevisae

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

International technological dynamics in production sectors: An empirical analysis

A new methodology is proposed for evaluating the economic development opportunities associated with the different industries making up a country’s economic structure. To this end, neo-Schumpeterian concepts are used to reinterpret the tools afforded by the “product space” literature in an attempt to assess the technological pervasiveness and sophistication of different production sectors. The ultimate objective is to develop a description of today’s techno-productive paradigm and the differential role that the various sectors play in it. An analysis of export data from 113 countries and territories for 2005-2009 indicates that the key sectors in the world economy are: industrial machinery, scientific and medical instruments, and pharmaceuticals. The strong performance of sectors based on mature technologies suggests that key sectors originating in different stages in history can survive and overlap one another, much like geological strata, owing to the persistence of older technological systems.

Use of Chemometric Tools to Determine the Source of Metals in Sediments of the Rivers of the Turvo/Grande Hydrographical Basin, Sao Paulo State, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Identification of species of the Euterpe genus by rare earth elements using inductively coupled plasma mass spectrometry and linear discriminant analysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sustainable development in the BRICS countries: an efficiency analysis by data envelopment

There is much concern about the social and environmental impacts caused by the economic growth of nations. Thus, to evaluate the socio-economic performance of nations, economists have increasingly addressed matters related to social welfare and the environment. It is within the scope of this context that this work discusses the performance of countries in the BRICS group regarding sustainable development. The objective of this study regards evaluating the efficiency of these countries in transforming productive resources and technological innovation into sustainable development. The proposed objective was achieved by using econometric tools as well as the data envelopment analysis method to then create economic, environmental, and social efficiency rankings for the BRICS countries, which enabled to carry out comparative analyses on the sustainable development of those countries. The results of such assessments can be of interest for more specific scientific explorations.