New multi-stage DC-DC converters for grid-connected photovoltaic systems

Renewable energy is high on international and national agendas. Currently, grid-connected photovoltaic (PV) systems are a popular technology to convert solar energy into electricity. Existing PV panels have a relatively low and varying output voltage so that the converter installed between the PVs and the grid should be equipped with high step-up and versatile control capabilities. In addition, the output current of PV systems is rich in harmonics which affect the power quality of the grid. In this paper, a new multi-stage hysteresis control of a step-up DC-DC converter is proposed for integrating PVs into a single-phase power grid. The proposed circuitry and control method is experimentally validated by testing on a 600W prototype converter. The developed technology has significant economic implications and could be applied to many distributed generation (DG) systems, especially for the developing countries which have a large number of small PVs connected to their single-phase distribution network. 

Performing 'The Tragedy of Mariam' and Constructing Stage History

Since the rediscovery of Elizabeth Cary’s drama, The Tragedy of Mariam, the play and its author have generated a veritable critical industry. Yet little has been written about performance, a lacuna explained by a reluctance to think about Mariam as a theatrical creation. This article challenges the current consensus by arguing for the play’s theatrical imprint and by analysing two 2013 performances – a site-specific production at Cary’s birthplace, and a production by the Lazarus Theatre Company. Throughout, Mariam is engaged with in terms of casting, costume, lighting, set and movement, issues that have mostly been bypassed in Cary studies.

An analysis of stage performance in automotive turbocharger centrifugal compressors

As the concept of engine downsizing becomes ever more integrated into automotive powertrain development strategies, so too does the pressure on turbocharger manufacturers to deliver improvements in map width and a reduction in the mass flow rate at which compressor surge occurs. A consequence of this development is the increasing importance of recirculating flows, both in the impeller inlet and outlet domains, on stage performance.
The current study seeks to evaluate the impact of the inclusion of impeller inlet recirculation on a meanline centrifugal compressor design tool. Using a combination of extensive test data, single passage CFD predictions, and 1-D analysis it is demonstrated how the addition of inlet recirculation modelling impacts upon stage performance close to the surge line. It is also demonstrated that, in its current configuration, the accuracy of the 1-D model prediction diminishes significantly with increasing blade tip speed.
Having ascertained that the existing model requires further work, an evaluation of the vaneless diffuser modelling method currently employed within the existing 1-D model is undertaken. The comparison of the predicted static pressure recovery coefficient with test data demonstrated the inherent inadequacies in the resulting prediction, in terms of both magnitude and variation with flow rate. A simplified alternative method based on an equivalent friction coefficient is also presented that, with further development, could provide a significantly improved stage performance prediction.

The Intersection of Religious Autonomy and Religious Symbols: Setting the Stage

Two sets of issues in the area of law and religion have generated a large share of attention and controversy across a wide number of countries and jurisdictions in recent years. The first set of issues relates to the autonomy of churches and other religiously affiliated entities such as schools and social service organisations in their hiring and personnel decisions, involving the question of how far, if at all, such entities should be free from the influence and oversight of the state. The second set of issues involves the presence of religious symbols in the public sphere, such as in state schools or on public lands, involving the question of how far the state should be free from the influence of religion. Although these issues – freedom of religion from the state, and freedom of the state from religion – could be viewed as opposite sides of the same coin, they are almost always treated as separate lines of inquiry, and the implications of each for the other have not been the subject of much scrutiny. In this Introduction, we consider whether insights might be drawn from thinking about these issues both from a comparative law perspective and also from considering these two lines of cases together.

Paediatricians' opinions of microneedle-mediated monitoring: a key stage in the translation of microneedle technology from laboratory into clinical practice

Microneedle (MN) arrays could offer an alternative method to traditional drug delivery and blood sampling methods. However, acceptance among key end-users is critical for new technologies to succeed. MNs have been advocated for use in children and so, paediatricians are key potential end-users. However, the opinions of paediatricians on MN use have been previously unexplored. The aim of this study was to investigate the views of UK paediatricians on the use of MN technology within neonatal and paediatric care. An online survey was developed and distributed among UK paediatricians to gain their opinions of MN technology and its use in the neonatal and paediatric care settings, particularly for MN-mediated monitoring. A total of 145 responses were obtained, with a completion response rate of 13.7 %. Respondents believed an alternative monitoring technique to blood sampling in children was required. Furthermore, 83 % of paediatricians believed there was a particular need in premature neonates. Overall, this potential end-user group approved of the MN technology and a MN-mediated monitoring approach. Minimal pain and the perceived ease of use were important elements in gaining favour. Concerns included the need for confirmation of correct application and the potential for skin irritation. The findings of this study provide an initial indication of MN acceptability among a key potential end-user group. Furthermore, the concerns identified present a challenge to those working within the MN field to provide solutions to further improve this technology. The work strengthens the rationale behind MN technology and facilitates the translation of MN technology from lab bench into the clinical setting.