Report of the regional workshop in transboundary aquatic animal health issues, Bangkok, Thailand, 12-13 January, 2012

This workshop was implemented as part of the Transboundary Diagnostic Analysis (TDA). The main focus was on the shrimp and fish aquaculture sectors and addressed issues such as aquatic animal health and transfers of aquatic animals and plants.

Report of the Marine Protected Areas Working Group meeting, Penang, Malaysia, 11-12 February, 2014

The objectives of the workshop were to review and update Marine Protected Area (MPA) data, finalise policy briefs for each country and recommend future actions and policies for sustainable management of MPAs.

Report of the BOBLME ecosystem characterisation workshop, Phuket, Thailand, 10-12 February, 2014

The goals of the workshop were to: present verified data, draft a report containing visual descriptors and information on the structure and function of BOBLME ecosystems; identify information gaps and transboundary issues and develop capacity of national scientists on data integration techniques.

Report of the training workshop on the application of Ecopath with Ecosim to BOBLME, Phuket, Thailand, 8-12 September, 2014

The workshop's objective was to provide information to improve a regional Ecopath with Ecoism (EwE) model.The workshop described the basis and principles underlying the software, encompassing the basics of Ecopath to Ecospace, economics and management strategy evaluation.

Report of the essential EAFM training course, Chittagong, Bangladesh, 12-20 November, 2014

Participants were exposed to concepts and information about Ecosystem Approach to Fisheries Management (EAFM) using a structured, participatory method of delivery. The learning strategy involved specifically designed exercises, using real examples, to consolidate learning. Daily monitoring and reviews were conducted together with pre-and post-course assessment.

Report of the BOBLME fishing capacity workshop, Phuket, Thailand, 12-13 January, 2015

The workshop focused on capacity utilisation estimation using Data Envelopment Analysis (DEA) to assess the fishing capacity of fleets.

Aquatic ecology monitoring: water quality, fish, fish catch, sanitation and disease vectors: monitoring no.12, 25th-30th April 2013

Bujagali hydropower dam construction is now completed and a reservoir behind the dam has been created, extending all the way up to Kalange-Makwanzi, an upstream transects. During the 10th monitoring survey-April 2012, a third transect was established in the mid of the reservoir where it runs up to 30 m deep and sampled similarly as at the two original sampling transects, Kalange-Makwanzi and Buyala-Kikubamutwe for comparative purposes. This monitoring survey No. 12 undertaken between 25th and 30th April 2013 is the third one to be conducted after completion of construction of Bujagali Hydropower Dam. Two pre-construction baseline surveys in April 2000 and April 2006 were conducted and during construction phase, eight monitoring surveys (September 2007, April 2008, April 2009, October 2009, April 2010, September 2010, April 2011, September 2011) were conducted. Since 2009 biannual monitoring surveys have been conducted at an upstream and a downstream transect of the BHPP with emphasis on the following aspects: water quality determinants, biology and ecology of fishes and food webs, fish stock and fish catch including economic aspects of catch and sanitation/vector studies (bilharzias and river blindness). In the post-construction monitoring surveys, the assessments of algae, zooplankton and benthic macro-invertebrates which had been restrained since April 2008 were also included.

Report of the baseline survey undertaken on the Chinese cage site in Napoleon Gulf, Northern Lake Victoria, 12 March 2012

The government of the People's Republic of China through a 2007 agreement with the Government of the Republic of Uganda, has establishment of an Agricultural Technology Demonstration Center (ATDC). The first phase covering the building of aquaculture infrastructure at Kajjansi ARDC is complete and the second operation phase has started in which facilities for cage culture have been set up in the Napoleon gulf, northern Lake Victoria near Jinja. The cage facility is aimed at boosting fish farming within the lake as a diversification to the traditional pond fish culture technology. NaFIRRI scientists as well as Chinese experts undertook a baseline survey in the chosen cage site on 12 March 2012. The survey covered determination of water depth, water transparency, measurement of selected physical-chemical parameters (temperature,dissolved oxygen, conductivity and pH; determination of the nutrient status and study of algae, invertebrate and fish communities at the site. Materials and methodologies used in the survey were based on the Standard Operating Procedures (SOPs) of NaFIRRI. The study area was divided into three study sites. Site 1 (upstream) was at 8.9 metre depth while site 2 (proposed cage site) and site 3 (downstream) were 6 and 4.3 metres deep respectively. Water transparency was lowest at site 1 (1.58 m) and highest at site 3 (1.64 m). Dissolved oxygen at the three sites ranged from 6.0 to 8 mg/I. Water temperature profiles fluctuated within narrow limits between 26.5 and 27.5 DC. Measurements of pH were between 7 (neutral) and 8 (alkaline) while electrical conductivity was between 98 and 101 uS/em. These observed physical-chemical parameters at the study site were considered suitable for cage fish rearing purposes. Nitrite-nitrogen levels varied within narrow limits from 0.043 to 0.0453 mgtl. Similarly, Ammonia-nitrogen varied between 0.015 and 0.0185 mg/1. Soluble reactive phosphorus (SRP) level was highest at site 3 (O.012mgll) compared to that at sites 1 and 2 (0.009mgll). Total suspended solids (TSS) were higher at site 1 (83.3mgll), thereafter decreasing to lower levels at sites 2 (24.8mgtl) and 3 (19.8mgl) respectively. The nutrient level results observed here all fall below the maximum permissible limits by NEMA and therefore the site is recommended for cage culture The algal community was constituted by four major groups: Blue greens,Greens, Cryptophytes, and Diatoms with blue greens as the common and dominant group. High algal biomass (19944961 ugtL) of the dominant blue green algae was observed at site 1 compared site 2 and 3 (58655.2 & 27487. 7 ugtL) respectively. Occurrence of toxicin producing algae: microsytis and cylindrospermopsis in the proposed cage area was considered to be of not much significance as their concentrations were below harmful levels. However, monitoring their presence, biomass and seasonality will be critical in order to follow when and where they occur and at what time of the year for ease of management of the cages

Fiber laser processing of amorphous rare earth NeFeB magnetic materials

Since the exchange coupling theory was proposed by Kneller and Hawig in 1991 there has been a significant effort within the magnetic materials community to enhance the performance of rare earth magnets by utilising nano-composite meta-materials. Inclusions of magnetically soft iron smaller than approximately 10 nm in diameter are exchange coupled to a surrounding magnetically hard Nd2Fe14B matrix and provide an enhanced saturisation magnetisation without reducing coercivity. For such a fine nanostructure to be produced, close control over the thermal history of the material is needed. A processing route which provides this is laser annealing from an amorphous alloy precursor. In the current work, relationships between laser parameters, thermal histories of laser processed amorphous stoichiometric NdFeB ribbons and the magnetic properties of the resulting nanocrystalline products have been determined with a view to applying the process to thick film nanocomposite magnet production.

Hardfacing using supersonic laser depostion of stellite-6

The capability of manufacturing coatings is of central importance in engineering design. Many components require nowadays the application of additional layers, to enhance mechanical properties and protect against hostile environments. Supersonic Laser Deposition (SLD) is a novel coating method, based upon Cold Spray (CS) principles. In this technique the deposition velocities can be significantly lower than those required for effective bonding in CS applications. The addition of laser heat energy permits a change in the thermodynamic experience of impacting particles, thereby offering a greater opportunity for metallurgical bonding at lower velocities compared to the CS process technology. The work reported in this paper demonstrates the ability of the SLD process to deliver hard facing materials to engineering surfaces. Stellite-6 has been deposited on low carbon steel tubes over a range of process parameters, determining the appropriate target power and traverse speeds for coating deposition. Coating properties and parameters were examined to determine the main properties, micro-structure and processing cost. Their morphology was studied through optical microscopy, SEM and X-Ray Diffraction. The results have shown that SLD is capable of depositing Stellite-6, with enhanced properties compared to laser clad counterparts.

Mode-locked and single-longitudinal-mode waveguide lasers fabricated by femtosecond laser pulses in Er:Yb-doped phosphate glass

Mode-locked and single-longitudinal-mode waveguide lasers, manufactured by femtosecond laser writing in Er-Yb-doped phosphate glasses, are presented. Transform-limited 1.6-ps pulses and a cw output power exceeding 50 mW have been obtained in the two regimes. © 2007 Optical Society of America.