Efeito do teor metálico em catalisadores Co/Al2O3 aplicados à reação de reforma a vapor de etanol

The development of cobalt catalysts to produce hydrogen from ethanol is the goal of this investigation. Co/Al2O3 catalysts were prepared by impregnation and characterized by atomic absorption, nitrogen adsorption, X-ray diffraction, Raman spectroscopy, temperature programmed reduction and carbon analysis. The catalysts contained Co3O4 oxide and Co3+ and Co2+ species interacting with alumina. The cobalt load affects the crystal size and the crystalline structure and higher Co loads influence the reaction mechanism, changing the selectivity of the catalysts, decreasing the amount of CO produced and avoiding the formation of products catalyzed by the support. The ethanol conversion was 50-70% with 10-<1% of CO in the hydrogen.

Estudos Cinéticos da aquação do trans-[Co(en)2Cl2]Cl

The trans-dichlorobis(ethylenediamine)cobalt(III) chloride was synthesized in an undergraduate laboratory and its aquation reaction was carried out at different temperatures. This reaction follows pseudo-first-order kinetics and the rate constants, determined at 25, 35, 45, 55 and 70 º C, are 1.44 x 10-3; 5.14 x 10-3; 1.48 x 10-2; 4.21 x 10-2 and 2.21 x 10-1 s-1, respectively. The activation energy is 93.99 ± 2.88 kJ mol-1.

Recuperação de metais de catalisadores de hidrorrefino usados via fusão com KHSO4

This work describes a process for metal recovery from spent NiMo and CoMo/Al2O3 commercial hydrorefining catalysts. The samples were treated by fusion with potassium hydrogen sulfate (5 h, 600 ºC) with a KHSO4/catalyst mass ratio of 10:1. After fusion the solid was solubilized in water (100 ºC), leaving silicon compounds as residue. Losses of nickel and cobalt may reach 16 wt% of the amount present in the sample, depending on the silicon content. Soluble metals were isolated by selective precipitation techniques (nickel, cobalt, aluminum) or by solvent extraction with methyl-isobutyl ketone (molybdenum) in a hydrochloric acid medium. All metals were recovered in very good yields except for nickel and cobalt in the presence of considerable amounts of silicon. Soluble wastes consist of potassium/sodium sulfates/chlorides. Solid wastes correspond to about 4 wt% of the catalyst and can be discarded in industrial dumps.

Tempo de vida útil de propelentes base-simples

The purpose of this work was to determine the safe shelf life of single-base propellants. The kinetic parameters relative to the consumption of the stabilizer diphenylamine (DPA) added to the propellant were determined as a function of the storage and ageing time. High Performance Liquid Chromatography (HPLC) with spectrophotometric detection was used to determine the DPA percentage before and after the artificial ageing at 60, 70 and 80 ºC. The experimental data were very well adjusted to a pseudo-first order kinetic model and the respective kinetic constants are 8.0-10-3 day-1 (60 ºC); 1.9-10-2 day-1 (70 ºC); 1.2-10-1 day-1 (80 ºC). The activation energy was calculated as 130 kJ mol-1 and the half-time for depletion of the DPA at the hypothetical temperature of 40 ºC of storage was estimated as being 6 years.

Stereoselective syntheses of (+)- isoretronecanol and (+)-5-epi-tashiromine via addition of chiral titanium (iv) enolates to cyclic n-acyliminium ions

The stereoselective addition of the titanium (IV) enolates derived from (S)-4-isopropyl-N-4-chlorobutyryl-1,3-thiazolidine-2-thione (8) and from (S)-4-isopropyl-N-4-chloropentanoyl-1,3-thiazolidine-2-thione (9) to N-Boc-2-methoxypyrrolidine (5b) afforded the addition products (+)-10 and (+)-11 in 84% yield in both cases, as 8.6:1 and 10:1 diastereoisomeric mixtures, respectively. A three-step sequence allowed to convert these adducts to (+)-isoretronecanol (1) and (+)-5-epi-tashiromine (2) in 43% and 49% overall yield, respectively.

Aplicação da metodologia de superfície de resposta no estudo da produção e extração da poligalacturonase

The aim of this work was to verify the effects of initial medium moisture content (U), addition of ammonium sulphate (N) and of potassium phosphate (P) in the production of the polygalacturonase through the solid-state fermentation, using cashew apple husk as substrate and Aspergillus niger CCT0916 as transformation agent. We also studied the best extraction conditions of the produced enzyme. The best condition of production was with U of 40%, 1% of N and 0% of P being reached an activity of the poligalacturonase of 10.1 U/g. The best extraction condition is an agitation system with a time of 100 min and a solvent-fermented medium volume ratio of 5 mL/g.

Volatile compounds of Nectandra salicina (lauraceae) from Costa Rica and their cytotoxic activity on cell lines

The chemical composition of the volatiles of Nectandra salicina growing wild in Costa Rica was determined by capillary GC/FID and GC/MS. Thirty-seven and forty-two compounds were identified in the leaf and branch oils respectively corresponding to about 92.6 and 86.2% of the total amount of the oils. The major components of the leaf oil were: atractylone (14.6%), viridiflorene (10.1%), α-pinene (9.4%), β-caryophyllene (7.2%), α-humulene (7.0%), δ-cadinene (6.1%), β-pinene (6.0%) and germacrene D (5.8%). The major components of the branch oil were: atractylone (21.1%), germacrene D (10.7%), viridiflorene (7.9%) and 7-epi-α-selinene (5.0%). When the oils were tested on different cell lines, all the LD50 values were higher than 150 µg/mL, with values very similar for the leaf and branch oils. Low toxicity could be explained by antagonistic effects among the main compounds present in the oils.

Effect of dye structure and redox mediators on anaerobic azo and anthraquinone dye reduction

We investigated the biological decolourisation of dyes with different molecular structures. The kinetic constant values (k1) achieved with azo dye Reactive Red 120 were 7.6 and 10.1 times higher in the presence of RM (redox mediators) AQDS and riboflavin, respectively, than the assays lacking RM. The kinetic constant achieved with the azo dye Congo Red was 42 times higher than that obtained with the anthraquinone dye Reactive Blue 4. The effect of RM on dye reduction was more evident for azo dyes resistant to reductive processes, and ineffective for anthraquinone dyes because of the structural stability of the latter.

Biomonitoramento de Cr e Pb em peixes de água doce

Trace metal content of three fish species harvested from a tank located in the City of Guarapuava-PR, Brazil were determined by digestion and voltametry. Trace metal content in fish samples were 0.10-1.30 µg/g (muscle) and 0.45-15.90 µg/g (liver) for chromium, 0.35-2.56 µg/g (muscle) and 2.32-34.30 µg/g (liver) for lead. The levels of lead and chromium in fish samples were higher than the recommended legal limits for human consumption. To assess the dietary intake of Cr and Pb by fish, weekly intake was calculated based on average metals contents and weekly consumption of fish and it compared with PTWI (Provisional Tolerable Weekly Intake). The Cr and Pb have achieved up to 25 and 45%, respectively, of PTWI recommended by WHO/FAO.

Decaimento de íons cianato e a formação de carbamato de etila

Cyanate ion stability was studied in aqueous/ethanolic solutions, pH = 4.5 (CH3COOH/NaCH3COO), at different temperatures. Following the decay [(OCN)-] versus time, in the presence of excess C2H5OH, the rate constant for this reaction (k1) was calculated as (2.5 ± 0.3) x 10-4 s-1 at 25 ºC, for 0 < [C2H5OH] < 13.7 x 10-1 mol L-1. For [C2H5OH] > 2.0 mol L-1 a decrease in the numerical value of k1 was observed, reaching 5.2 x 10-5 s-1 when [CH3CH2OH] = 13.7 mol L-1. Variations in the kinetic parameter values ΔH1‡, ΔS1‡ and ΔG1‡ for the cyanate ion decay reaction were observed for solutions at different ethanol concentrations.

Enanismo y podredumbre basal de eustoma grandiflorum y su relación con la densidad de fusarium solani en el suelo

En cultivos comerciales de lisianthus de La Plata y alrededores (Argentina), se observó que Fusarium solani afecta al 100% de los establecimientos productivos provocando enanismo y podredumbre basal. Se realizó un ensayo para analizar la densidad de F. solani del suelo bajo el efecto de distintos tratamientos y relacionarla con la evolución de ambas patologías. Los análisis del suelo se hicieron en 3 épocas: antes del transplante (octubre), al inicio (enero) y al final (marzo) de la floración. En enero y marzo se evaluó la incidencia de cada enfermedad y se cuantificaron las plantas cosechadas. La población de F. solani no varió en las 3 épocas y se redujo significativamente con los fumigantes y el vapor. Esto determinó una incidencia del enanismo (enero) de 0 a 9,5% con los primeros y de 31,4% con el vapor. Para el testigo y los fungicidas la incidencia varió entre el 87,9 y el 100%, disminuyendo las plantas cosechadas. La podredumbre basal comenzó con el ingreso del patógeno a través de las heridas producidas por la cosecha. Ésta fue significativamente mayor con los fumigantes (90,7 a 99%) y también con el vapor (76,8%), produciéndose la mayor incidencia en marzo (15,7 a 22,2 y 10,1% respectivamente), reduciéndose el período productivo. Se destaca la importancia de disminuir la densidad de F. solani en el momento del transplante. Entre los métodos de control el Metam sodio y Dazomet podrían ser eficaces sustitutos del Bromuro de metilo, seguidos por el vapor.

Caracterização fisiomorfológica de isolados de Colletotrichum musae

Isolados de Colletotrichum musae obtidos de quatro cultivares de banana (Musa spp.) 'Comprida', 'Maçã', 'Pacovan' e 'Prata' foram estudados quanto ao aspecto morfológico dos conídios, apressórios, características culturais, diâmetro das colônias em meio BDA, germinação dos conídios em água destilada esterilizada e meio líquido BD, como também, quanto ao efeito da combinação de C/N no crescimento micelial, esporulação e peso da matéria seca, sob alternância luminosa, a aproximadamente, 25 ºC. No estudo da relação C/N, as fontes de carbono foram dextrose, sacarose e sorbitol e as de nitrogênio asparagina, peptona e nitrato de potássio combinadas na proporção 10:1 (10 g de carbono para 1 g de nitrogênio). Os resultados mostraram conídios hialinos, com forma e tamanhos característicos da espécie, variando dentro dos limites estabelecidos para a espécie. A relação comprimento/largura foi menor para os isolados Iso-1, Iso-6 e Iso-8 oriundos de banana 'Comprida'. A germinação de conídios ocorreu a partir de 8 h de incubação, havendo diferença significativa entre os isolados, quanto ao percentual de conídios germinados. Foram observados apressórios em todos os isolados, variando em quantidade. Houve diversidade nas características culturais e diâmetro das colônias dos isolados, em BDA. Com relação às combinações C/N, a análise estatística revelou diferença significativa entre os isolados, sob efeito da interação C/N, bem como dos fatores independentes, sobre o crescimento micelial, produção de esporos e peso seco do micélio. De um modo geral, as combinações de carbono com peptona favoreceram esses três processos fisiológicos, porém com diferença significativa entre os isolados de C. musae dentro de cada processo considerado.

Fatigue analysis of brackets with and without scallop for bridge and other deck structure using effective notch stress.

Due to functional requirement of a structural detail brackets with and without scallop are frequently used in bridges, decks, ships and offshore structure. Scallops are designed to serve as passage way for fluids, to reduce weld length and plate distortions. Moreover, scallops are used to avoid intersection of two or more welds for the fact that there is the presence of inventible inherent initial crack except for full penetrated weld and the formation of multi-axial stress state at the weld intersection. Welding all around the scallop corner increase the possibility of brittle fracture even for the case the bracket is not loaded by primary load. Avoiding of scallop will establish an initial crack in the corner if bracket is welded by fillet welds. If the two weld run pass had crossed, this would have given a 3D residual stress situation. Therefore the presences and absence of scallop necessitates the 3D FEA fatigue resistance of both types of brackets using effective notch stress approach ( ). FEMAP 10.1 with NX NASTRAN was used for the 3D FEA. The first and main objective of this research was to investigate and compare the fatigue resistance of brackets with and without scallop. The secondary goal was the fatigue design of scallops in case they cannot be avoided for some reason. The fatigue resistance for both types of brackets was determined based on approach using 1 mm fictitiously rounded radius based on IIW recommendation. Identical geometrical, boundary and loading conditions were used for the determination and comparison of fatigue resistance of both types of brackets using linear 3D FEA. Moreover the size effect of bracket length was also studied using 2D SHELL element FEA. In the case of brackets with scallop the flange plate weld toe at the corner of the scallop was found to exhibit the highest and made the flange plate weld toe critical for fatigue failure. Whereas weld root and weld toe at the weld intersections were the highly stressed location for brackets without scallop. Thus weld toe for brackets with scallop, and weld root and weld toe for brackets without scallop were found to be the critical area for fatigue failure. Employing identical parameters on both types of brackets, brackets without scallop had the highest except for full penetrated weld. Furthermore the fatigue resistance of brackets without scallop was highly affected by the lack of weld penetration length and it was found out that decreased as the weld penetration was increased. Despite the fact that the very presence of scallop reduces the stiffness and also same time induce stress concentration, based on the 3D FEA it is worth concluding that using scallop provided better fatigue resistance when both types of brackets were fillet welded. However brackets without scallop had the highest fatigue resistance when full penetration weld was used. This thesis also showed that weld toe for brackets with scallop was the only highly stressed area unlike brackets without scallop in which both weld toe and weld root were the critical locations for fatigue failure when different types of boundary conditions were used. Weld throat thickness, plate thickness, scallop radius, lack of weld penetration length, boundary condition and weld quality affected the fatigue resistance of both types of brackets. And as a result, bracket design procedure, especially welding quality and post weld treatment techniques significantly affect the fatigue resistance of both type of brackets.

Análise química inorgânica de leite esimulação do reagente CFA-C

Na análise de leite por espectrometria de emissão ótica com plasma induzido (ICP-OES) o produto comercial CFA-C, constituído por aminas terciárias, vêm sendo usado com sucesso como diluente em fase única. Devido ao custo do produto e possibilidades de contaminação durante o armazenamento, decidiu-se desenvolver um outro reagente de propriedades equivalentes ao referido produto. Testes qualitativos mostraram que o produto não contém ácido bórico nem EDTA. Em uma titulação potenciométrica de uma solução aquosa 10% v/v CFA-C com HCl obtiveram-se dois picos potenciométricos e deduziu-se que 90% do ácido foi consumido para neutralização da amina livre e 10% foi gasto para protonar um ânion de ácido fraco usado para formar um tampão de razão molar 10:1, do tipo R3N/R3NH+. Em uma simulação desse reagente preparou-se uma solução 6,06 mol L-1 de monoetanolamina (MEA) e 0,20 mol L-1 ácido cítrico, triprótico, para formar um tampão do mesmo tipo, 10:1, baseado na propriedade do íon citrato em complexar Ca(II). Outro tampão citrato mais diluído (1,52 mol L-1) foi preparado usando trishidroximetilaminometano (TRIS), que é uma amina menos solúvel. Essas misturas foram caracterizadas por análise potenciométrica e termoanalítica. O comportamento desses novos tampões amina/citrato foi adequado e comparável ao produto comercial.