Screening for mutations in human alpha-globin genes by nonradioactive single-strand conformation polymorphism

Point mutations and small insertions or deletions in the human alpha-globin genes may produce alpha-chain structural variants and alpha-thalassemia. Mutations can be detected either by direct DNA sequencing or by screening methods, which select the mutated exon for sequencing. Although small (about 1 kb, 3 exons and 2 introns), the alpha-globin genes are duplicate (alpha2 and alpha1) and highy G-C rich, which makes them difficult to denature, reducing sequencing efficiency and causing frequent artifacts. We modified some conditions for PCR and electrophoresis in order to detect mutations in these genes employing nonradioactive single-strand conformation polymorphism (SSCP). Primers previously described by other authors for radioactive SSCP and phast-SSCP plus denaturing gradient gel electrophoresis were here combined and the resultant fragments (6 new besides 6 original per alpha-gene) submitted to silver staining SSCP. Nine structural and one thalassemic mutations were tested, under different conditions including two electrophoretic apparatus (PhastSystem™ and GenePhor™, Amersham Biosciences), different polyacrylamide gel concentrations, run temperatures and denaturing agents, and entire and restriction enzyme cut fragments. One hundred percent of sensitivity was achieved with four of the new fragments formed, using the PhastSystem™ and 20% gels at 15ºC, without the need of restriction enzymes. This nonradioactive PCR-SSCP approach showed to be simple, rapid and sensitive, reducing the costs involved in frequent sequencing repetitions and increasing the reliability of the results. It can be especially useful for laboratories which do not have an automated sequencer.

Pressurized hot water flow-through extraction of birch wood

Effective processes to fractionate the main compounds in biomass, such as wood, are a prerequisite for an effective biorefinery. Water is environmentally friendly and widely used in industry, which makes it a potential solvent also for forest biomass. At elevated temperatures over 100 °C, water can readily hydrolyse and dissolve hemicelluloses from biomass. In this work, birch sawdust was extracted using pressurized hot water (PHWE) flow-through systems. The hypothesis of the work was that it is possible to obtain polymeric, water-soluble hemicelluloses from birch sawdust using flow-through PHW extractions at both laboratory and large scale. Different extraction temperatures in the range 140–200 °C were evaluated to see the effect of temperature to the xylan yield. The yields and extracted hemicelluloses were analysed to obtain sugar ratios, the amount of acetyl groups, furfurals and the xylan yields. Higher extraction temperatures increased the xylan yield, but decreased the molar mass of the dissolved xylan. As the extraction temperature increased, more acetic acid was released from the hemicelluloses, thus further decreasing the pH of the extract. There were only trace amounts of furfurals present after the extractions, indicating that the treatment was mild enough not to degrade the sugars further. The sawdust extraction density was increased by packing more sawdust in the laboratory scale extraction vessel. The aim was to obtain extracts with higher concentration than in typical extraction densities. The extraction times and water flow rates were kept constant during these extractions. The higher sawdust packing degree decreased the water use in the extractions and the extracts had higher hemicellulose concentrations than extractions with lower sawdust degrees of packing. The molar masses of the hemicelluloses were similar in higher packing degrees and in the degrees of packing that were used in typical PHWE flow-through extractions. The structure of extracted sawdust was investigated using small angle-(SAXS) and wide angle (WAXS) x-ray scattering. The cell wall topography of birch sawdust and extracted sawdust was compared using x-ray tomography. The results showed that the structure of the cell walls of extracted birch sawdust was preserved but the cell walls were thinner after the extractions. Larger pores were opened inside the fibres and cellulose microfibrils were more tightly packed after the extraction. Acetate buffers were used to control the pH of the extracts during the extractions. The pH control prevented excessive xylan hydrolysis and increased the molar masses of the extracted xylans. The yields of buffered extractions were lower than for plain water extractions at 160–170 °C, but at 180 °C yields were similar to those from plain water and pH buffers. The pH can thus be controlled during extraction with acetate buffer to obtain xylan with higher molar mass than those obtainable using plain water. Birch sawdust was extracted both in the laboratory and pilot scale. The performance of the PHWE flow-through system was evaluated in the laboratory and the pilot scale using vessels with the same shape but different volumes, with the same relative water flow through the sawdust bed, and in the same extraction temperature. Pre-steaming improved the extraction efficiency and the water flow through the sawdust bed. The extracted birch sawdust and the extracted xylan were similar in both laboratory and pilot scale. The PHWE system was successfully scaled up by a factor of 6000 from the laboratory to pilot scale and extractions performed equally well in both scales. The results show that a flow-through system can be further scaled up and used to extract water-soluble xylans from birch sawdust. Extracted xylans can be concentrated, purified, and then used in e.g. films and barriers, or as building blocks for novel material applications.

Possibility of press forming wood films into primary packaging

In recent times the packaging industry is finding means to maximize profit. Wood used to be the most advantageous and everyday material for packaging, worktables, counters, constructions, interiors, tools and as materials and utensils in the food companies in the world. The use of wood has declined vigorously, and other materials like plastic, ceramic, stainless steel, concrete, and aluminum have taken its place. One way that the industry could reduce its cost is by finding possibilities of using wood for primary packaging after which it can be safely recycled or burned as a carbon source for energy. Therefore, the main objective of this thesis is to investigate the possibility of press-forming a wood film into primary packaging. In order to achieve the stated objectives, discussion on major characteristics of wood in terms of structure, types and application were studied. Two different wood species, pine and birch were used for the experimental work. These were provided by a local carpentry workshop in Lappeenranta and a workshop in Ruokolahti supervised by Professor Timo Kärki. Laboratory tests were carried out at Lappeenranta University of Technology FMS workshop on Stenhøj EPS40 M hydraulic C-frame press coupled with National Instruments VI Logger and on the Adjustable packaging line machine at LUT Packaging laboratory. The tests succeeded better on the LUT packaging line than on the Stenhoj equipment due to the integrated heating system in the machine. However, there is much work to be done before the quality of a tray produced from the wood film is comparable to that of the wood plastic composite tray.

Frequency of Werner helicase 1367 polymorphism and age-related morbidity in an elderly Brazilian population

Werner syndrome (WS) is a premature aging disease caused by a mutation in the WRN gene. The gene was identified in 1996 and its product acts as a DNA helicase and exonuclease. Some specific WRN polymorphic variants were associated with increased risk for cardiovascular diseases. The identification of genetic polymorphisms as risk factors for complex diseases affecting older people can improve their prevention, diagnosis and prognosis. We investigated WRN codon 1367 polymorphism in 383 residents in a district of the city of São Paulo, who were enrolled in an Elderly Brazilian Longitudinal Study. Their mean age was 79.70 ± 5.32 years, ranging from 67 to 97. This population was composed of 262 females (68.4%) and 121 males (31.6%) of European (89.2%), Japanese (3.3%), Middle Eastern (1.81%), and mixed and/or other origins (5.7%). There are no studies concerning this polymorphism in Brazilian population. These subjects were evaluated clinically every two years. The major health problems and morbidities affecting this cohort were cardiovascular diseases (21.7%), hypertension (83.7%), diabetes (63.3%), obesity (41.23%), dementia (8.0%), depression (20.0%), and neoplasia (10.8%). Their prevalence is similar to some urban elderly Brazilian samples. DNA was isolated from blood cells, amplified by PCR and digested with PmaCI. Allele frequencies were 0.788 for the cysteine and 0.211 for the arginine. Genotype distributions were within that expected for the Hardy-Weinberg equilibrium. Female gender was associated with hypertension and obesity. Logistic regression analysis did not detect significant association between the polymorphism and morbidity. These findings confirm those from Europeans and differ from Japanese population.

The P48T germline mutation and polymorphism in the CDKN2A gene of patients with melanoma

CDKN2A has been implicated as a melanoma susceptibility gene in some kindreds with a family history of this disease. Mutations in CDKN2A may produce an imbalance between functional p16ink4a and cyclin D causing abnormal cell growth. We searched for germline mutations in this gene in 22 patients with clinical criteria of hereditary cancer (early onset, presence of multiple primary melanoma or 1 or more first- or second-degree relatives affected) by secondary structural content prediction, a mutation scanning method that relies on the propensity for single-strand DNA to take on a three-dimensional structure that is highly sequence dependent, and sequencing the samples with alterations in the electrophoretic mobility. The prevalence of CDKN2A mutation in our study was 4.5% (1/22) and there was a correlation between family history and probability of mutation detection. We found the P48T mutation in 1 patient with 2 melanoma-affected relatives. The patient descends from Italian families and this mutation has been reported previously only in Italian families in two independent studies. This leads us to suggest the presence of a mutational "hotspot" within this gene or a founder mutation. We also detected a high prevalence (59.1%) of polymorphisms, mainly alleles 500 C/G (7/31.8%) or 540 C/T (6/27.3%), in the 3' untranslated region of exon 3. This result reinforces the idea that these rare polymorphic alleles have been significantly associated with the risk of developing melanoma.

Intensification of hemicellulose hot-water extraction from spruce wood by parameter tuning

The growing population on earth along with diminishing fossil deposits and the climate change debate calls out for a better utilization of renewable, bio-based materials. In a biorefinery perspective, the renewable biomass is converted into many different products such as fuels, chemicals, and materials, quite similar to the petroleum refinery industry. Since forests cover about one third of the land surface on earth, ligno-cellulosic biomass is the most abundant renewable resource available. The natural first step in a biorefinery is separation and isolation of the different compounds the biomass is comprised of. The major components in wood are cellulose, hemicellulose, and lignin, all of which can be made into various end-products. Today, focus normally lies on utilizing only one component, e.g., the cellulose in the Kraft pulping process. It would be highly desirable to utilize all the different compounds, both from an economical and environmental point of view. The separation process should therefore be optimized. Hemicelluloses can partly be extracted with hot-water prior to pulping. Depending in the severity of the extraction, the hemicelluloses are degraded to various degrees. In order to be able to choose from a variety of different end-products, the hemicelluloses should be as intact as possible after the extraction. The main focus of this work has been on preserving the hemicellulose molar mass throughout the extraction at a high yield by actively controlling the extraction pH at the high temperatures used. Since it has not been possible to measure pH during an extraction due to the high temperatures, the extraction pH has remained a “black box”. Therefore, a high-temperature in-line pH measuring system was developed, validated, and tested for hot-water wood extractions. One crucial step in the measurements is calibration, therefore extensive efforts was put on developing a reliable calibration procedure. Initial extractions with wood showed that the actual extraction pH was ~0.35 pH units higher than previously believed. The measuring system was also equipped with a controller connected to a pump. With this addition it was possible to control the extraction to any desired pH set point. When the pH dropped below the set point, the controller started pumping in alkali and by that the desired set point was maintained very accurately. Analyses of the extracted hemicelluloses showed that less hemicelluloses were extracted at higher pH but with a higher molar-mass. Monomer formation could, at a certain pH level, be completely inhibited. Increasing the temperature, but maintaining a specific pH set point, would speed up the extraction without degrading the molar-mass of the hemicelluloses and thereby intensifying the extraction. The diffusion of the dissolved hemicelluloses from the wood particle is a major part of the extraction process. Therefore, a particle size study ranging from 0.5 mm wood particles to industrial size wood chips was conducted to investigate the internal mass transfer of the hemicelluloses. Unsurprisingly, it showed that hemicelluloses were extracted faster from smaller wood particles than larger although it did not seem to have a substantial effect on the average molar mass of the extracted hemicelluloses. However, smaller particle sizes require more energy to manufacture and thus increases the economic cost. Since bark comprises 10 – 15 % of a tree, it is important to also consider it in a biorefinery concept. Spruce inner and outer bark was hot-water extracted separately to investigate the possibility to isolate the bark hemicelluloses. It was showed that the bark hemicelluloses comprised mostly of pectic material and differed considerably from the wood hemicelluloses. The bark hemicelluloses, or pectins, could be extracted at lower temperatures than the wood hemicelluloses. A chemical characterization, done separately on inner and outer bark, showed that inner bark contained over 10 % stilbene glucosides that could be extracted already at 100 °C with aqueous acetone.

Wood biochemicals for the protection of health. Focus on hemicellulose, stilbenoids and lignans

Trees produce an enormous amount of compounds that are still scantly utilized.However, the results obtained from structurally similar biochemicals suggest that wood-derived compounds could be used for the protection of health in various applications. Polyphenols, for instance, could be extracted from wood in high quantities. Similar polyphenols to those in wood include resveratrol, found in grapes, and secoisolariciresinol, present in flaxseeds. Their consumption has been inversely associated with the incidence of various diseases, especially certain cancers and obesity-related disorders. The aim of this study was to determine the health-promoting effects of woodderived biochemicals. The effect of spruce hemicellulose on the growth of probiotic intestinal bacteria was studied. The results suggest that the bifidobacteria and lactobacilli can utilize hemicellulose and thus it has potential as a prebiotic compound. In particular, the efficacy of pine polyphenols to inhibit the growth of prostate cancer was our main interest. It was found that stilbenoids and lignans inhibited the proliferation of various cancer cells, and reduced the growth of prostate cancer xenografts in mice. The polyphenol rich pine knot extract was well tolerated in diet and extract-derived polyphenols were rapidly absorbed after intake. Furthermore, we determined the effect of the dietary pine knot extract on the weight gain and the expression of aromatase gene in reporter mouse expressing the promoter region of a human aromatase gene. It was found that dietary pine knot extract alleviated the obesity-induced inflammation in adipose tissue and downregulated the expression of a human aromatase gene. Taken together, several components of spruce and pine may have a future role as health-promoting compounds.

A cost-effective melting temperature assay for the detection of single-nucleotide polymorphism in the MBL2 gene of HIV-1-infected children

We report a fast (less than 3 h) and cost-effective melting temperature assay method for the detection of single-nucleotide polymorphisms in the MBL2 gene. The protocol, which is based on the Corbett Rotor Gene real time PCR platform and SYBR Green I chemistry, yielded, in the cohorts studied, sensitive (100%) and specific (100%) PCR amplification without the use of costly fluorophore-labeled probes or post-PCR manipulation. At the end of the PCR, the dissociation protocol included a slow heating from 60º to 95ºC in 0.2ºC steps, with an 8-s interval between steps. Melting curve profiles were obtained using the dissociation software of the Rotor Gene-3000 apparatus. Samples were analyzed in duplicate and in different PCR runs to test the reproducibility of this technique. No supplementary data handling is required to determine the MBL2 genotype. MBL2 genotyping performed on a cohort of 164 HIV-1-positive Brazilian children and 150 healthy controls, matched for age and sex and ethnic origin, yielded reproducible results confirmed by direct sequencing of the amplicon performed in blind. The three MBL2 variants (Arg52Cys, Gly54Asp, Gly57Glu) were grouped together and called allele 0, while the combination of three wild-type alleles was called allele A. The frequency of the A/A homozygotes was significantly higher among healthy controls (0.68) than in HIV-infected children (0.55; P = 0.0234) and the frequency of MBL2 0/0 homozygotes was higher among HIV-1-infected children than healthy controls (P = 0.0296). The 0 allele was significantly more frequent among the 164 HIV-1-infected children (0.29) than among the 150 healthy controls (0.18; P = 0.0032). Our data confirm the association between the presence of the mutated MBL2 allele (allele 0) and HIV-1 infection in perinatally exposed children. Our results are in agreement with the literature data which indicate that the presence of the allele 0 confers a relative risk of 1.37 for HIV-1 infection through vertical transmission.

Identification of a new human mtDNA polymorphism (A14290G) in the NADH dehydrogenase subunit 6 gene

Leber's hereditary optic neuropathy (LHON) is a maternally inherited form of retinal ganglion cell degeneration leading to optic atrophy in young adults. Several mutations in different genes can cause LHON (heterogeneity). The ND6 gene is one of the mitochondrial genes that encodes subunit 6 of complex I of the respiratory chain. This gene is a hot spot gene. Fourteen Persian LHON patients were analyzed with single-strand conformational polymorphism and DNA sequencing techniques. None of these patients had four primary mutations, G3460A, G11788A, T14484C, and G14459A, related to this disease. We identified twelve nucleotide substitutions, G13702C, T13879C, T14110C, C14167T, G14199T, A14233G, G14272C, A14290G, G14365C, G14368C, T14766C, and T14798C. Eleven of twelve nucleotide substitutions had already been reported as polymorphism. One of the nucleotide substitutions (A14290G) has not been reported. The A14290G nucleotide substitution does not change its amino acid (glutamic acid). We looked for base conservation using DNA star software (MEGALIGN program) as a criterion for pathogenic or nonpathogenic nucleotide substitution in A14290G. The results of ND6 gene alignment in humans and in other species (mouse, cow, elegans worm, and Neurospora crassa mold) revealed that the 14290th base was not conserved. Fifty normal controls were also investigated for this polymorphism in the Iranian population and two had A14290G polymorphism (4%). This study provides evidence that the mtDNA A14290G allele is a new nonpathogenic polymorphism. We suggest follow-up studies regarding this polymorphism in different populations.

Polymorphism of the promoter region and exon 1 of the CTLA4 gene in endemic pemphigus foliaceus (fogo selvagem)

Endemic pemphigus foliaceus (EPF) is an autoimmune bullous skin disease characterized by acantholysis and antibodies against a desmosomal protein, desmoglein 1. Genetic and environmental factors contribute to development of this multifactorial disease. HLA class II and some cytokine gene polymorphisms are the only genetic markers thus far known to be associated with susceptibility to or protection from EPF. The cytotoxic T-lymphocyte antigen-4 gene (CTLA4) encodes a key immunoreceptor molecule that regulates and inhibits T-cell proliferation. It participates in the regulatory process controlling autoreactivity and therefore has been considered a strong candidate gene in autoimmune diseases. In the search for genes that might influence EPF pathogenesis, we analyzed variants of the CTLA4 gene in a sample of 118 patients and 291 controls from a Brazilian population. This is the first study investigating the possible role of polymorphisms of the 2q33 chromosomal region in differential susceptibility to pemphigus foliaceus. Promoter region and exon 1 single nucleotide polymorphisms -318 (C,T) and 49 (A,G) were genotyped using sequence-specific oligonucleotide probes after amplification by the polymerase chain reaction. The allelic and genotypic frequencies did not differ significantly between the patient and the control groups (-318T: 9.8 and 10.9%, 49G: 33.0 and 35.2% were the allelic frequencies in patients and controls, respectively). In addition, no significant difference was found when the patient and control population samples were stratified by the presence of HLA-DRB1 alleles. We conclude that the CTLA4 -318 (C,T) and 49 (A,G) polymorphisms do not play a major role in EPF development.

The clinical impact of MTHFR polymorphism on the vascular complications of sickle cell disease

Sickle cell disease (SCD) is one of the most common inherited diseases in the world and the patients present notorious clinical heterogeneity. It is known that patients with SCD present activation of the blood coagulation and fibrinolytic systems, especially during vaso-occlusive crises, but also during the steady state of the disease. We determined if the presence of the factor V gene G1691A mutation (factor V Leiden), the prothrombin gene G20210A variant, and methylenetetrahydrofolate reductase (MTHFR) C677T polymorphism may be risk factors for vascular complications in individuals with SCD. We studied 53 patients with SCD (60% being women), 29 with SS (sickle cell anemia; 28 years, range: 13-52 years) and 24 with SC (sickle-hemoglobin C disease; 38.5 years, range: 17-72 years) hemoglobinopathy. Factor V Leiden, MTHFR C677T polymorphism, and prothrombin G20210A variant were identified by PCR followed by further digestion of the PCR product with specific endonucleases. The following vascular complications were recorded: stroke, retinopathy, acute thoracic syndrome, and X-ray-documented avascular necrosis. Only one patient was heterozygous for factor V Leiden (1.8%) and there was no prothrombin G20210A variant. MTHFR 677TT polymorphism was detected in 1 patient (1.8%) and the heterozygous form 677TC was observed in 18 patients (34%, 9 with SS and 9 with SC disease), a prevalence similar to that reported by others. No association was detected between the presence of the MTHFR 677T allele and other genetic modulation factors, such as alpha-thalassemia, ß-globin gene haplotype and fetal hemoglobin. The presence of the MTHFR 677T allele was associated with the occurrence of vascular complications in SCD, although this association was not significant when each complication was considered separately. In conclusion, MTHFR C677T polymorphism might be a risk factor for vascular complications in SCD.

Analysis of polymorphism at site -174 G/C of interleukin-6 promoter region in multiple myeloma

It is well established that interleukin-6 (IL-6) is an essential growth factor for multiple myeloma (MM) and patients with increased IL-6 levels have a poor prognosis. In healthy subjects, the presence of the C allele at a polymorphic site (-174 G/C) of the IL-6 gene is related to low IL-6 levels. In view of the potential association of this particular polymorphism with IL-6 concentration, and the relevance of IL-6 in MM pathogenesis, the objective of the present study was to investigate the prevalence of IL-6 (-174 G/C) promoter polymorphism and its association with development of MM in Brazilian individuals. We investigated the prevalence of these alleles in 52 patients and 60 healthy subjects (matched by age, sex, and race) of a Brazilian population. Thirty patients were male (42.4%), 24 (46.2%) were white and the median age at diagnosis was 58.5 years (range: 28 to 84 years). To determine the IL-6 (-174 G/C) polymorphism, molecular analysis was performed by polymerase chain reaction followed by endonuclease restriction digestion. The genotype distributions observed in the group of patients were 4% CC, 42% GC and 54% GG. The C allele frequency was 0.25. These results were similar to the control group, suggesting no impact of this polymorphism on the susceptibility to MM.

Association of the 894G>T polymorphism of the endothelial constitutive nitric oxide synthase gene with unstable angina

The 894G>T polymorphism of the endothelial constitutive nitric oxide synthase gene consists of the substitution of a guanine base by a thymine at the 894th nucleotide of the gene. An association of this polymorphism with acute coronary syndromes has been described, only when in combination with other polymorphisms of this gene. The aim of the present study was to search for an association between this polymorphism and unstable angina in a southern Brazilian population. In a case-control study, 156 patients (group 1 (N = 83): unstable angina, group 2 (N = 73): stable angina) were genotyped by PCR and digestion of the product. Univariate analysis demonstrated that the minimal luminal diameter and the degree of stenosis of the culprit lesion differed between groups (P = 0.006 and 0.005, respectively). In addition, the frequencies of the T allele and of the T allele carriers (combined TT and TG genotypes) were significantly higher in the group with unstable angina (41.6 vs 28.8%; P = 0.025, Pearson chi-square test, and 73.5 vs 45.2%; P = 0.001, Pearson chi-square test, respectively). Multivariate logistic regression showed that the frequency of the T allele carriers was the only variable with a predictive value for unstable angina, when controlled for the other variables (6.1 (95% CI = 2.55-14.43); P < 0.001). Thus, in a homogenous group of patients, the endothelial constitutive nitric oxide synthase 894G>T polymorphism was associated with unstable angina. We suggest that this polymorphism may be a genetic risk factor for unstable angina.

Lipoprotein lipase PvuII polymorphism is associated with variations in serum lipid levels in non-diabetic pregnant women

The aim of the present study was to determine if there is an association between the single nucleotide polymorphisms (SNPs) of the lipoprotein lipase (LPL) and apolipoprotein E (apo E) genes and the serum lipid profile in pregnancy and puerperium. Non-diabetic women of European descent in the third semester of pregnancy (N = 120) were selected. Those with diseases or other condition that could modify their lipid profile were excluded from the study (N = 32). Serum lipids were measured by routine laboratory procedures and genomic DNA was extracted by a salting out method. LPL (PvuII and HindIII) and apo E (HhaI) SNPs were detected by the polymerase chain reaction and restriction fragment length polymorphism. Categorical and continuous variables were compared by the chi-square test and Student t-test or ANOVA, respectively. Women carrying the LPL P1P1 genotype had higher serum LDL cholesterol (N = 21; 155 ± 45 mg/dL) than women carrying the P1P2/P2P2 genotypes (N = 67; 133 ± 45 mg/dL; P = 0.032). During the puerperium period, serum levels of triglycerides and VLDL cholesterol were significantly reduced in women carrying the P1P1 (73%, P = 0.006) and P1P2 (51%, P = 0.002) genotypes but not in women carrying the P2P2 genotype (23%, P > 0.05). On the other hand, serum concentrations of lipids did not differ between the LPL HindIII and apo E genotypes during pregnancy and after delivery. We conclude that LPL PvuII SNP is associated with variations in serum lipids during pregnancy and the puerperal period in non-diabetic women.

Is there an association between T102C polymorphism of the serotonin receptor 2A gene and urinary incontinence?

The regulation of bladder function is influenced by central serotonergic modulation. Several genetic polymorphisms related to serotonin control have been described in the literature. T102C polymorphism of the serotonin receptor 2A gene (5-HT2A) has been shown to be associated with certain diseases such as non-fatal acute myocardial infarction, essential hypertension, and alcoholism. In the present study, we examined the association between 5-HT2A gene polymorphism and urinary incontinence in the elderly. A case-control study was performed in 298 elderly community dwellers enrolled in the Gravataí-GENESIS Project, Brazil, which studies gene-environmental interactions in aging and age-related diseases. Clinical, physical, biochemical, and molecular analyses were performed on volunteers. 5-HT2A genotyping was determined by PCR-RFLP techniques using the HpaII restriction enzyme. The subjects had a mean age of 68.05 ± 6.35 years (60-100 years), with 16.9% males and 83.1% females. The C allele frequency was 0.494 and the T allele frequency was 0.506. The CC genotype frequency was 21.78%, the CT genotype frequency was 55.24% and the TT genotype frequency was 22.98%. We found an independent significant association between the TT genotype (35.7%) and urinary incontinence (OR = 2.06, 95%CI = 1.16-3.65). Additionally, urinary incontinence was associated with functional dependence and systolic hypertension. The results suggest a possible genetic influence on urinary incontinence involving the serotonergic pathway. Further investigations including urodynamic evaluation will be performed to better explain our findings.