Anther culture properties of oat x wild red oat progenies and a search for RAPD markers associated with anther culture ability

Selostus: Ponsiviljeltävyys ja siihen liittyvät geenimerkit peltokauran ja susikauran risteytysjälkeläisissä

All-sky search algorithms for monochromatic signals in bar gravitational wave detector data

In this paper we design and develop several filtering strategies for the analysis of data generated by a resonant bar gravitational wave (GW) antenna, with the goal of assessing the presence (or absence) therein of long-duration monochromatic GW signals, as well as the eventual amplitude and frequency of the signals, within the sensitivity band of the detector. Such signals are most likely generated in the fast rotation of slightly asymmetric spinning stars. We develop practical procedures, together with a study of their statistical properties, which will provide us with useful information on the performance of each technique. The selection of candidate events will then be established according to threshold-crossing probabilities, based on the Neyman-Pearson criterion. In particular, it will be shown that our approach, based on phase estimation, presents a better signal-to-noise ratio than does pure spectral analysis, the most common approach.

Caída de bloques de hielo en los frentes del glaciar de casquete de la Isla Livingston (Archipiélago de la Shetland del Sur). Detección por métodos sísmicos. Influencia de las variables ambientales.

Se han utilizado los datos procedentes de una red (array) sísmica situada en la isla Livingston para estudiar la evolución de las caídas de bloques de hielo en los frentes de los glaciares (calving). Pa rtiendo de que la causa fundamental de las caídas de bloques es el flujo del hielo, se ha estudiado la influencia de la temperatura ambiental, la variación del nivel de la marea, la humedad y la velocidad del viento sobre este fenómeno. Como principal conclusión se deduce que la temperatura ambiental es el factor que ejerce una mayor y más directa influencia sobre las caídas de los bloques de hielo.

Synergies between optical and physical variables in intercepting parabolic targets.

Interception requires precise estimation of time-to-contact (TTC) information. A long-standing view posits that all relevant information for extracting TTC is available in the angular variables, which result from the projection of distal objecs on to the retina. The diferent timing models rooted in this tradition have consequently relied on combining visual angle and its rate of expansion in diferent ways with tau being the most well-known solution for TTC...

Evolutionary computing in search-based software engineering

This master’s thesis aims to study and represent from literature how evolutionary algorithms are used to solve different search and optimisation problems in the area of software engineering. Evolutionary algorithms are methods, which imitate the natural evolution process. An artificial evolution process evaluates fitness of each individual, which are solution candidates. The next population of candidate solutions is formed by using the good properties of the current population by applying different mutation and crossover operations. Different kinds of evolutionary algorithm applications related to software engineering were searched in the literature. Applications were classified and represented. Also the necessary basics about evolutionary algorithms were presented. It was concluded, that majority of evolutionary algorithm applications related to software engineering were about software design or testing. For example, there were applications about classifying software production data, project scheduling, static task scheduling related to parallel computing, allocating modules to subsystems, N-version programming, test data generation and generating an integration test order. Many applications were experimental testing rather than ready for real production use. There were also some Computer Aided Software Engineering tools based on evolutionary algorithms.

Quest for Orthologs Entails Quest for Tree of Life: In Search of the Gene Stream.

Quest for Orthologs (QfO) is a community effort with the goal to improve and benchmark orthology predictions. As quality assessment assumes prior knowledge on species phylogenies, we investigated the congruency between existing species trees by comparing the relationships of 147 QfO reference organisms from six Tree of Life (ToL)/species tree projects: The National Center for Biotechnology Information (NCBI) taxonomy, Opentree of Life, the sequenced species/species ToL, the 16S ribosomal RNA (rRNA) database, and trees published by Ciccarelli et al. (Ciccarelli FD, et al. 2006. Toward automatic reconstruction of a highly resolved tree of life. Science 311:1283-1287) and by Huerta-Cepas et al. (Huerta-Cepas J, Marcet-Houben M, Gabaldon T. 2014. A nested phylogenetic reconstruction approach provides scalable resolution in the eukaryotic Tree Of Life. PeerJ PrePrints 2:223) Our study reveals that each species tree suggests a different phylogeny: 87 of the 146 (60%) possible splits of a dichotomous and rooted tree are congruent, while all other splits are incongruent in at least one of the species trees. Topological differences are observed not only at deep speciation events, but also within younger clades, such as Hominidae, Rodentia, Laurasiatheria, or rosids. The evolutionary relationships of 27 archaea and bacteria are highly inconsistent. By assessing 458,108 gene trees from 65 genomes, we show that consistent species topologies are more often supported by gene phylogenies than contradicting ones. The largest concordant species tree includes 77 of the QfO reference organisms at the most. Results are summarized in the form of a consensus ToL (http://swisstree.vital-it.ch/species_tree) that can serve different benchmarking purposes.

Assessing positive mental health in people with chronic physical health problems: correlations with socio-demographic variables and physical health status

Background: A holistic perspective on health implies giving careful consideration to the relationship between physical and mental health. In this regard the present study sought to determine the level of Positive Mental Health (PMH) among people with chronic physical health problems, and to examine the relationship between the observed levels of PMH and both physical health status and socio-demographic variables. Methods: The study was based on the Multifactor Model of Positive Mental Health (Lluch, 1999), which comprises six factors: Personal Satisfaction (F1), Prosocial Attitude (F2), Self-control (F3), Autonomy (F4), Problem-solving and Self-actualization (F5), and Interpersonal Relationship Skills (F6). The sample comprised 259 adults with chronic physical health problems who were recruited through a primary care center in the province of Barcelona (Spain). Positive mental health was assessed by means of the Positive Mental Health Questionnaire (Lluch, 1999). Results: Levels of PMH differed, either on the global scale or on specific factors, in relation to the following variables: age: global PMH scores decreased with age (r=-0.129; p=0.038); b) gender: men scored higher on F1 (t=2.203; p=0.028) and F4 (t=3.182; p=0.002), while women scored higher on F2 (t -3.086; p=0.002) and F6 (t=-2.744; p=0.007); c) number of health conditions: the fewer the number of health problems the higher the PMH score on F5 (r=-0.146; p=0.019); d) daily medication: polymedication patients had lower PMH scores, both globally and on various factors; e) use of analgesics: occasional use of painkillers was associated with higher PMH scores on F1 (t=-2.811; p=0.006). There were no significant differences in global PMH scores according to the type of chronic health condition. The only significant difference in the analysis by factors was that patients with hypertension obtained lower PMH scores on the factor Autonomy (t=2.165; p=0.032). Conclusions: Most people with chronic physical health problems have medium or high levels of PMH. The variables that adversely affect PMH are old age, polypharmacy and frequent consumption of analgesics. The type of health problem does not influence the levels of PMH. Much more extensive studies with samples without chronic pathology are now required in order to be able to draw more robust conclusions.

Localized prostate cancer in Norway, the United States, and Spain: between-country differences of variables before treatment among patients eligible for curative treatment

Between-country differences in medical and sociodemographic variables, and patient-related outcomes (PROs) before treatment might explain published variations of side effects after radical prostatecomy (RP) or radiotherapy (RAD) for prostate cancer (PCa). This hypothesis was tested among 1908 patients from the United States, Spain, and Norway. Significant between-country differences were observed for most factors investigated before treatment. The observations should be considered in comparison of the frequency and severity of internationally published studies. Background: In men with PCa, large variations of PROs after RP or high-dose RAD might be related to betweencountry differences of medical and sociodemographic variables, and differences in PROs before treatment in the sexual and urinary domains. Patients and Methods: In 1908 patients with localized PCa from Norway, the United States, or Spain, the relation between medical (prostate-specific antigen, Gleason score, cT-category) and sociodemographic variables (age, education, marital status) before treatment was investigated. Using the Expanded Prostate Cancer Index Composite questionnaire, PROs before treatment within the sexual and urinary domains were also considered. Results: Compared with the European patients, American patients were younger, fewer had comorbid conditions, and more had a high education level. Fifty-three percent of the US men eligible for RP had low-risk tumors compared with 42% and 31% among the Norwegian and the Spanish patients, respectively. Among the Spanish RAD patients, 54% had had low-risk tumors compared with 34% of the American and 21% of the Norwegian men planned for RAD, respectively. Compared with the European patients, significantly fewer US patients reported moderate or severe sexual dysfunction and related problems. In most subgroups, the number of patients with sexual or urinary dysfunction exceeded that of patients with bother related to the reported dysfunction. Conclusion: Statistically significant between-country differences were observed in medical and sociodemographic variables, and in PROs before treatment within the sexual and urinary domains. Large differences between reported dysfunction and related problems within the sexual and urinary domains indicate that dysfunction and bother should be reported separately in addition to calculation of summary scores. The documented differences, not at least regarding PROs, might in part explain the large variation of side effects after treatment evident in the medical literature

Trust region versus line search for computing the optical flow

We consider the numerical treatment of the optical flow problem by evaluating the performance of the trust region method versus the line search method. To the best of our knowledge, the trust region method is studied here for the first time for variational optical flow computation. Four different optical flow models are used to test the performance of the proposed algorithm combining linear and nonlinear data terms with quadratic and TV regularization. We show that trust region often performs better than line search; especially in the presence of non-linearity and non-convexity in the model.

Las emociones como variables relacionadas con el cambio de hábitos de salud en familiares y amigos próximos de enfermos de cáncer

Study of the changes in health habits of 105 cancer patients’ relatives and close friends after the diagnosis. The aim is to try to verify whether the knowledge of the disease has got some impact in the modification of their life styles. The emotional alterations influence in this change of behaviour has been analysed futhermore. An interview of own creation and HADS (Anxiety Hospital and Depression Scale of Zigmond and Snaith, 1983) instrument, in a Spanish and a Catalan version, were used with this aim. The results show that 21.1% of the participants presented positive changes in their health habits after the diagnosis of the relative or close friend and 11.5% showed negative changes. In relation to the role of the emotions, averages of anxiety (14,33; d.t.=4,98) and depressive (10,17; d.t.=4,93) symptoms were higher in those subjects who made negative changes than in those who did not make any change (9,32; d.t.=5,37 and 6,33; d.t.=4,64). In addition, the youngest participants, with more depressive symptoms and who visit the subject more often, are those who become more assets modifying health habits. The results suggest that emotional alterations, mainly depressive symptoms, are associated with negative change and, therefore, it would be suitable to lend some type of attention to these alterations in the population studied with the purpose of improving their present and future health

The effects of some variables on CO2 laser-MAG hybrid welding

The CO2-laser-MAG hybrid welding process has been shown to be a productive choice for the welding industry, being used in e.g. the shipbuilding, pipe and beam manufacturing, and automotive industries. It provides an opportunity to increase the productivity of welding of joints containing air gaps compared with autogenous laser beam welding, with associated reductions in distortion and marked increases in welding speeds and penetration in comparison with both arc and autogenous laser welding. The literature study indicated that the phenomena of laser hybrid welding are mostly being studied using bead-on-plate welding or zero air gap configurations. This study shows it very clearly that the CO2 laser-MAG hybrid welding process is completely different, when there is a groove with an air gap. As in case of industrial use it is excepted that welding is performed for non-zero grooves, this study is of great importance for industrial applications. The results of this study indicate that by using a 6 kW CO2 laser-MAG hybrid welding process, the welding speed may also be increased if an air gap is present in the joint. Experimental trials indicated that the welding speed may be increased by 30-82% when compared with bead-on-plate welding, or welding of a joint with no air gap i.e. a joint prepared as optimum for autogenous laser welding. This study demonstrates very clearly, that the separation of the different processes, as well as the relative configurations of the processes (arc leading or trailing) affect welding performance significantly. These matters influence the droplet size and therefore the metal transfer mode, which in turn determined the resulting weld quality and the ability to bridge air gaps. Welding in bead-onplate mode, or of an I butt joint containing no air gap joint is facilitated by using a leading torch. This is due to the preheating effect of the arc, which increases the absorptivity of the work piece to the laser beam, enabling greater penetration and the use of higher welding speeds. With an air gap present, air gap bridging is more effectively achieved by using a trailing torch because of the lower arc power needed, the wider arc, and the movement of droplets predominantly towards the joint edges. The experiments showed, that the mode of metal transfer has a marked effect on gap bridgeability. Transfer of a single droplet per arc pulse may not be desirable if an air gap is present, because most of the droplets are directed towards the middle of the joint where no base material is present. In such cases, undercut is observed. Pulsed globular and rotational metal transfer modes enable molten metal to also be transferred to the joint edges, and are therefore superior metal transfer modes when bridging air gaps. It was also found very obvious, that process separation is an important factor in gap bridgeability. If process separation is too large, the resulting weld often exhibits sagging, or no weld may be formed at all as a result of the reduced interaction between the component processes. In contrast, if the processes are too close to one another, the processing region contains excess molten metal that may create difficulties for the keyhole to remain open. When the distance is optimised - i.e. a separation of 0-4 mm in this study, depending on the welding speed and beam-arc configuration - the processes act together, creating beneficial synergistic effects. The optimum process separation when using a trailing torch was found to be shorter (0-2 mm) than when a leading torch is used (2-4 mm); a result of the facilitation of weld pool motion when the latter configuration is adopted. This study demonstrates, that the MAG process used has a strong effect on the CO2-laser-MAG hybrid welding process. The laser beam welding component is relatively stable and easy to manage, with only two principal processing parameters (power and welding speed) needing to be adjusted. In contrast, the MAG process has a large number of processing parameters to optimise, all of which play an important role in the interaction between the laser beam and the arc. The parameters used for traditional MAG welding are often not optimal in achieving the most appropriate mode of metal transfer, and weld quality in laser hybrid welding, and must be optimised if the full range of benefits provided by hybrid welding are to be realised.

Selecting the most relevant variables for anaerobic digestion imbalances : Two case studies

In this study, a wrapper approach was applied to objectively select the most important variables related to two different anaerobic digestion imbalances, acidogenic states and foaming. This feature selection method, implemented in artificial neural networks (ANN), was performed using input and output data from a fully instrumented pilot plant (1 m 3 upflow fixed bed digester). Results for acidogenic states showed that pH, volatile fatty acids, and inflow rate were the most relevant variables. Results for foaming showed that inflow rate and total organic carbon were among the relevant variables, both of which were related to the feed loading of the digester. Because there is not a complete agreement on the causes of foaming, these results highlight the role of digester feeding patterns in the development of foaming

Identifying Pertinent Variables for Nonresponse Follow-Up Surveys : Lessons Learned from 4 Cases in Switzerland

All social surveys suffer from different types of errors, of which one of the most studied is non-response bias. Non-response bias is a systematic error that occurs because individuals differ in their accessibility and propensity to participate in a survey according to their own characteristics as well as those from the survey itself. The extent of the problem heavily depends on the correlation between response mechanisms and key survey variables. However, non-response bias is difficult to measure or to correct for due to the lack of relevant data about the whole target population or sample. In this paper, non-response follow-up surveys are considered as a possible source of information about non-respondents. Non-response follow-ups, however, suffer from two methodological issues: they themselves operate through a response mechanism that can cause potential non-response bias, and they pose a problem of comparability of measure, mostly because the survey design differs between main survey and non-response follow-up. In order to detect possible bias, the survey variables included in non-response surveys have to be related to the mechanism of participation, but not be sensitive to measurement effects due to the different designs. Based on accumulated experience of four similar non-response follow-ups, we studied the survey variables that fulfill these conditions. We differentiated socio-demographic variables that are measurement-invariant but have a lower correlation with non-response and variables that measure attitudes, such as trust, social participation, or integration in the public sphere, which are more sensitive to measurement effects but potentially more appropriate to account for the non-response mechanism. Our results show that education level, work status, and living alone, as well as political interest, satisfaction with democracy, and trust in institutions are pertinent variables to include in non-response follow-ups of general social surveys. - See more at: https://ojs.ub.uni-konstanz.de/srm/article/view/6138#sthash.u87EeaNG.dpuf

Search Interfaces on the Web: Querying and Characterizing

Current-day web search engines (e.g., Google) do not crawl and index a significant portion of theWeb and, hence, web users relying on search engines only are unable to discover and access a large amount of information from the non-indexable part of the Web. Specifically, dynamic pages generated based on parameters provided by a user via web search forms (or search interfaces) are not indexed by search engines and cannot be found in searchers’ results. Such search interfaces provide web users with an online access to myriads of databases on the Web. In order to obtain some information from a web database of interest, a user issues his/her query by specifying query terms in a search form and receives the query results, a set of dynamic pages that embed required information from a database. At the same time, issuing a query via an arbitrary search interface is an extremely complex task for any kind of automatic agents including web crawlers, which, at least up to the present day, do not even attempt to pass through web forms on a large scale. In this thesis, our primary and key object of study is a huge portion of the Web (hereafter referred as the deep Web) hidden behind web search interfaces. We concentrate on three classes of problems around the deep Web: characterization of deep Web, finding and classifying deep web resources, and querying web databases. Characterizing deep Web: Though the term deep Web was coined in 2000, which is sufficiently long ago for any web-related concept/technology, we still do not know many important characteristics of the deep Web. Another matter of concern is that surveys of the deep Web existing so far are predominantly based on study of deep web sites in English. One can then expect that findings from these surveys may be biased, especially owing to a steady increase in non-English web content. In this way, surveying of national segments of the deep Web is of interest not only to national communities but to the whole web community as well. In this thesis, we propose two new methods for estimating the main parameters of deep Web. We use the suggested methods to estimate the scale of one specific national segment of the Web and report our findings. We also build and make publicly available a dataset describing more than 200 web databases from the national segment of the Web. Finding deep web resources: The deep Web has been growing at a very fast pace. It has been estimated that there are hundred thousands of deep web sites. Due to the huge volume of information in the deep Web, there has been a significant interest to approaches that allow users and computer applications to leverage this information. Most approaches assumed that search interfaces to web databases of interest are already discovered and known to query systems. However, such assumptions do not hold true mostly because of the large scale of the deep Web – indeed, for any given domain of interest there are too many web databases with relevant content. Thus, the ability to locate search interfaces to web databases becomes a key requirement for any application accessing the deep Web. In this thesis, we describe the architecture of the I-Crawler, a system for finding and classifying search interfaces. Specifically, the I-Crawler is intentionally designed to be used in deepWeb characterization studies and for constructing directories of deep web resources. Unlike almost all other approaches to the deep Web existing so far, the I-Crawler is able to recognize and analyze JavaScript-rich and non-HTML searchable forms. Querying web databases: Retrieving information by filling out web search forms is a typical task for a web user. This is all the more so as interfaces of conventional search engines are also web forms. At present, a user needs to manually provide input values to search interfaces and then extract required data from the pages with results. The manual filling out forms is not feasible and cumbersome in cases of complex queries but such kind of queries are essential for many web searches especially in the area of e-commerce. In this way, the automation of querying and retrieving data behind search interfaces is desirable and essential for such tasks as building domain-independent deep web crawlers and automated web agents, searching for domain-specific information (vertical search engines), and for extraction and integration of information from various deep web resources. We present a data model for representing search interfaces and discuss techniques for extracting field labels, client-side scripts and structured data from HTML pages. We also describe a representation of result pages and discuss how to extract and store results of form queries. Besides, we present a user-friendly and expressive form query language that allows one to retrieve information behind search interfaces and extract useful data from the result pages based on specified conditions. We implement a prototype system for querying web databases and describe its architecture and components design.