Progressive multifocal leukoencephalopathy in common variable immunodeficiency: mitigated course under mirtazapine and mefloquine.

Demonstration of survival and outcome of progressive multifocal leukoencephalopathy (PML) in a 56-year-old patient with common variable immunodeficiency, consisting of severe hypogammaglobulinemia and CD4+ T lymphocytopenia, during continuous treatment with mirtazapine (30 mg/day) and mefloquine (250 mg/week) over 23 months. Regular clinical examinations including Rankin scale and Barthel index, nine-hole peg and box and block tests, Berg balance, 10-m walking tests, and Montreal Cognitive Assessment (MoCA) were done. Laboratory diagnostics included complete blood count and JC virus (JCV) concentration in cerebrospinal fluid (CSF). The noncoding control region (NCCR) of JCV, important for neurotropism and neurovirulence, was sequenced. Repetitive MRI investigated the course of brain lesions. JCV was detected in increasing concentrations (peak 2568 copies/ml CSF), and its NCCR was genetically rearranged. Under treatment, the rearrangement changed toward the archetype sequence, and later JCV DNA became undetectable. Total brain lesion volume decreased (8.54 to 3.97 cm(3)) and atrophy increased. Barthel (60 to 100 to 80 points) and Rankin (4 to 2 to 3) scores, gait stability, and box and block (7, 35, 25 pieces) and nine-hole peg (300, 50, 300 s) test performances first improved but subsequently worsened. Cognition and walking speed remained stable. Despite initial rapid deterioration, the patient survived under continuous treatment with mirtazapine and mefloquine even though he belongs to a PML subgroup that is usually fatal within a few months. This course was paralleled by JCV clones with presumably lower replication capability before JCV became undetectable. Neurological deficits were due to PML lesions and progressive brain atrophy.

Anàlisi de la gestió de fons d’inversió de renda variable en el període 2009-2013

La crisi financera que es va originar l’any 2007 va tenir uns efectes devastadors a tots els àmbits de l’economia. El mercat hipotecari es va desplomar i l’accés al crèdit es va restringir a la majoria de la població. Els efectes que va tenir la crisi sobre aquests mercats han estat analitzats i estudiats repetidament en diverses assignatures. Però el que es vol observar amb la realització d’aquest treball són els efectes que va provocar la crisi econòmica sobre un altre àmbit del mercat financer, el mercat de fons d’estalvi i més concretament, en el de fons d’inversió. Aquest treball vol analitzar si els mercats espanyol i europeu de fons d’inversió ha patit els efectes de la crisi econòmica i si ha estat així, en quin grau s’han vist afectats. Aquests mercats venen regits per experts professionals en la matèria i la rendibilitat d’aquests actius vindrà determinada per la gestió que aquests facin. Per poder mesurar si la seva gestió aconsegueix millorar els resultats que podríem obtenir invertint en el mercat, utilitzarem uns índexs financers anomenats mesures de performance. Dins el ventall disponible de fons d’inversió, ens centrarem en el mercat de renda variable ja que és el que presenta major variabilitat i està més sotmès a possibles canvis en el mercat. En concret s’analitzaran els resultats de la gestió del mercat de fons d’inversió de renda variable durant els anys posteriors a la crisi fins a l’actualitat tant al mercat espanyol com al mercat europeu per diferents categories de fons.

Combining conservative and variable markers to inferthe evolutionary history of Prunus subgen. Amygdalus s.l.under domestication

The genus Prunus L. is large and economically important. However, phylogenetic relationships within Prunus at low taxonomic level, particularly in the subgenus Amygdalus L. s.l., remain poorly investigated. This paper attempts to document the evolutionary history of Amygdalus s.l. and establishes a temporal framework, by assembling molecular data from conservative and variable molecular markers. The nuclear s6pdh gene in combination with the plastid trnSG spacer are analyzed with bayesian and maximum likelihood methods. Since previous phylogenetic analysis with these markers lacked resolution, we additionally analyzed 13 nuclear SSR loci with the δµ2 distance, followed by an unweighted pair group method using arithmetic averages algorithm. Our phylogenetic analysis with both sequence and SSR loci confirms the split between sections Amygdalus and Persica, comprising almonds and peaches, respectively. This result is in agreement with biogeographic data showing that each of the two sections is naturally distributed on each side of the Central Asian Massif chain. Using coalescent based estimations, divergence times between the two sections strongly varied when considering sequence data only or combined with SSR. The sequence-only based estimate (5 million years ago) was congruent with the Central Asian Massif orogeny and subsequent climate change. Given the low level of differentiation within the two sections using both marker types, the utility of combining microsatellites and data sequences to address phylogenetic relationships at low taxonomic level within Amygdalus is discussed. The recent evolutionary histories of almond and peach are discussed in view of the domestication processes that arose in these two phenotypically-diverging gene pools: almonds and peaches were domesticated from the Amygdalus s.s. and Persica sections, respectively. Such economically important crops may serve as good model to study divergent domestication process in close genetic pool.

Tissue-specific regulatory circuits reveal variable modular perturbations across complex diseases.

Mapping perturbed molecular circuits that underlie complex diseases remains a great challenge. We developed a comprehensive resource of 394 cell type- and tissue-specific gene regulatory networks for human, each specifying the genome-wide connectivity among transcription factors, enhancers, promoters and genes. Integration with 37 genome-wide association studies (GWASs) showed that disease-associated genetic variants-including variants that do not reach genome-wide significance-often perturb regulatory modules that are highly specific to disease-relevant cell types or tissues. Our resource opens the door to systematic analysis of regulatory programs across hundreds of human cell types and tissues (http://regulatorycircuits.org).

Effect of tow-drop gaps on the damage resistance and tolerance of Variable-Stiffness Panels

This paper presents an experimental study of the effects of tow-drop gaps in Variable Stiffness Panels under drop-weight impact events. Two different configurations, with and without ply-staggering, have been manufactured by Automated Fibre Placement and compared with their baseline counterpart without defects. For the study of damage resistance, three levels of low velocity impact energy are generated with a drop-weight tower. The damage area is analysed by means of ultrasonic inspection. Results of the analysed defect configurations indicate that the influence of gap defects is only relevant under small impact energy values. However, in the case of damage tolerance, the residual compressive strength after impact does not present significant differences to that of conventional straight fibre laminates. This indicates that the strength reduction is driven mainly by the damage caused by the impact event rather than by the influence of manufacturing-induced defects

Variable-stiffness composite panels: Defect tolerance under in-plane tensile loading

Automated Fiber Placement is being extensively used in the production of major composite components for the aircraft industry. This technology enables the production of tow-steered panels, which have been proven to greatly improve the structural efficiency of composites by means of in-plane stiffness variation and load redistribution. However, traditional straight-fiber architectures are still preferred. One of the reasons behind this is related to the uncertainties, as a result of process-induced defects, in the mechanical performance of the laminates. This experimental work investigates the effect of the fiber angle discontinuities between different tow courses in a ply on the un-notched and open-hole tensile strength of the laminate. The influence of several manufacturing parameters are studied in detail. The results reveal that 'ply staggering' and '0% gap coverage' is an effective combination in reducing the influence of defects in these laminates

Warranty Practices and Costs in the Industry of Welding Machines Manufacturing

The objective of the master’s thesis is to define the warranty practices and costs in the welding machines manufacturing company and do a proposal for a warranty policy based on the practices and costs. The study include a disquisition of the warranty practices in the subsidiaries and distributor sales. The disquisition of the warranty practices introduces the information relates to warranty period, warranty costs, including repair, spare part and other costs, the practices with the replaced parts, the utilization rate of the eWarranty system and information relates to special arrangements in the warranties. The warranty costs are defined besides the group level also separately per regions and product families. From some product families the disquisition is done per products. In this study is also done a proposal for a warranty policy for the company. The proposal speaks out the length of warranty period, the compensation of the warranty costs, the practices with replaced parts and usage of eWarranty system.

Effects of modern variable frequency drive on the reliability of an old crane induction motor

The work aims to analyze the possibilities of utilizing old crane driving AC induction motors in modern pulse-width-modulated variable frequency drives. Bearing currents and voltage stresses are the two main problems associated with modern IGBT inverters, and they may cause premature failure of an old induction motor. The origins of these two problems are studied. An analysis of the mechanism of bearing failure is proposed. Certain types of bearing currents are considered in detail. The most effective and economical means are chosen for bearing currents mitigation. Transient phenomena of cables and mechanism of over voltages occurring at motor terminals are studied in the work. The weakest places of the stator winding insulation system are shown and recommendations are given considering the mitigation of voltage stresses. Only the most appropriate and cost effective preventative methods are chosen for old motor drives. Rewinding of old motors is also considered.

Empirical analysis of solid management waste costs: Some evidence from Galicia, Spain

This paper analyses the factors that determine solid waste service costs. The empirical analysis is based on information derived from a survey conducted in a sample of Galician municipalities. The results reveal economies of scale in municipalities of fewer than 50,000 inhabitants, such that cooperation between these municipalities could lead to cost savings. It also appears that private delivery is not cheaper than public delivery. Finally, designating a larger proportion of the total waste volume to recycling does not imply greater costs.

Defining a framework model to determine total costs of managed desktops using ITIL best practices

In modern day organizations there are an increasing number of IT devices such as computers, mobile phones and printers. These devices can be located and maintained by using specialized IT management applications. Costs related to a single device accumulate from various sources and are normally categorized as direct costs like hardware costs and indirect costs such as labor costs. These costs can be saved in a configuration management database and presented to users using web based development tools such as ASP.NET. The overall costs of IT devices during their lifecycle can be ten times higher than the actual purchase price of the product and ability to define and reduce these costs can save organizations noticeable amount of money. This Master’s Thesis introduces the research field of IT management and defines a custom framework model based on Information Technology Infrastructure Library (ITIL) best practices which is designed to be implemented as part of an existing IT management application for defining and presenting IT costs.

Older consumers adopting information and communication technology: Evaluating opportunities for health care applications

The purpose of this dissertation is to analyse older consumers' adoption of information and communication technology innovations, assess the effect of aging related characteristic, and evaluate older consumers' willingness to apply these technologies in health care services. This topic is considered important, because the population in Finland (as in other welfare states) is aging and thus offers a possibility for marketers, but on the other hand threatens society with increasing costs for healthcare. Innovation adoption has been under research from several aspects in both organizational and consumer research. In the consumer behaviour, several theories have been developed to predict consumer responses to innovation. The present dissertation carefully reviews previous research and takes a closer look at the theory of planned behaviour, technology acceptance model and diffusion of innovations perspective. It is here suggested that there is a possibility that these theories can be combined and complemented to predict the adoption of ICT innovations among aging consumers, taking the aging related personal characteristics into account. In fact, there are very few studies that have concentrated on aging consumers in the innovation research, and thus there was a clear indent for the present research. ICT in the health care context has been studied mainly from the organizational point of view. If the technology is thus applied for the communication between the individual end-user and service provider, the end-user cannot be shrugged off. The present dissertation uses empirical evidence from a survey targeted to 55-79 year old people from one city in Southern-Carelia. The empirical analysis of the research model was mainly based on structural equation modelling that has been found very useful on estimating causal relationships. The tested models were targeted to predict the adoption stage of personal computers and mobile phones, and the adoption intention of future health services that apply these devices for communication. The present dissertation succeeded in modelling the adoption behaviour of mobile phones and PCs as well as adoption intentions of future services. Perceived health status and three components behind it (depression, functional ability, and cognitive ability) were found to influence perception of technology anxiety. Better health leads to less anxiety. The effect of age was assessed as a control variable, in order to evaluate its effect compared to health characteristics. Age influenced technology perceptions, but to lesser extent compared to health. The analyses suggest that the major determinant for current technology adoption is perceived behavioural control, and additionally technology anxiety that indirectly inhibit adoption through perceived control. When focusing on future service intentions, the key issue is perceived usefulness that needs to be highlighted when new services are launched. Besides usefulness, the perception of online service reliability is important and affects the intentions indirectly. To conclude older consumers' adoption behaviour is influenced by health status and age, but also by the perceptions of anxiety and behavioural control. On the other hand, launching new types of health services for aging consumers is possible after the service is perceived reliable and useful.

Power Consumption in Carbon Capture and Storage Systems (CCS) and Possibilities to Reduce Power Consumption with Variable Speed Drives

The aim of this master´s thesis is to study which processes increase the auxiliary power consumption in carbon capture and storage processes and if it is possible to reduce the auxiliary power consumption with variable speed drives. Also the cost of carbon capture and storage is studied. Data about auxiliary power consumption in carbon capture is gathered from various studies and estimates made by various research centres. Based on these studies a view is presented how the power auxiliary power consumption is divided between different processes in carbon capture processes. In a literary study, the operation of three basic carbon capture systems is described. Also different methods to transport carbon dioxide and carbon dioxide storage options are described in this section. At the end of the thesis processes that consume most of the auxiliary power are defined and possibilities to reduce the auxiliary power consumption are evaluated. Cost of carbon capture, transport and storage are also evaluated at this point and in the case that the carbon capture and storage systems are fully deployed. According to the results, it can be estimated what are the processes are where variable speed drives can be used and what kind of cost and power consumption reduction could be achieved. Results also show how large a project carbon capture and storage is if it is fully deployed.

Public and Private Production in a Mixed Delivery System: Regulation, Competition and Costs

Academics and policy makers are increasingly shifting the debate concerning the best form of public service provision beyond the traditional dilemma between pure public and pure private delivery modes, because, among other reasons, there is a growing body of evidence that casts doubt on the existence of systematic cost savings from privatization, while any competition seems to be eroded over time. In this paper we compare the relative merits of public and private delivery within a mixed delivery system. We study the role played by ownership, transaction costs, and competition on local public service delivery within the same jurisdiction. Using a stochastic cost frontier, we analyze the public-private urban bus system in the Barcelona Metropolitan Area. Our results suggest that private firms tendering the service have higher delivery costs than those incurred by the public firm, especially when transaction costs are taken into account. Tenders, therefore, do not help to reduce delivery costs. Our results suggest that under a mixed delivery scheme, which permits the co-existence of public and private production, the metropolitan government and the regulator can use private delivery to contain costs in the public firm and, at the same time, benefit from the greater flexibility of private firms for dealing with events not provided for under contract.

Driver costs in small firms: Empirical analysis for farms

The agricultural sector has always been characterized by a predominance of small firms. International competition and the consequent need for restraining costs are permanent challenges for farms. This paper performs an empirical investigation of cost behavior in agriculture using panel data analysis. Our results show that transactions caused by complexity influence farm costs with opposite effects for specific and indirect costs. While transactions allow economies of scale in specific costs, they significantly increase indirect costs. However, the main driver for farm costs is volume. In addition, important differences exist for small and big farms, since transactional variables significantly influence the former but not the latter. While sophisticated management tools, such ABC, could provide only limited complementary useful information but no essential allocation bases for farms, they seem inappropriate for small farms