Analyse documentaire en milieu universitaire : deux approches générales comparées

Ce mémoire porte sur l’analyse documentaire en milieu universitaire. Deux approches générales sont d’abord étudiées : l’approche centrée sur le document (premier chapitre), prédominante dans la tradition bibliothéconomique, et l’approche centrée sur l’usager (deuxième chapitre), influencée par le développement d’outils le plus souvent associés au Web 2.0. L’opposition entre ces deux démarches reflète une dichotomie qui se trouve au cœur de la notion de sujet, c’est-à-dire les dimensions objective et subjective du sujet. Ce mémoire prend par conséquent la forme d’une dissertation dont l’avantage principal est de considérer à la fois d’importants acquis qui appartiennent à la tradition bibliothéconomique, à la fois des développements plus récents ayant un impact important sur l’évolution de l’analyse documentaire en milieu universitaire. Notre hypothèse est que ces deux tendances générales doivent être mises en relief afin d’approfondir la problématique de l’appariement, laquelle définit la difficulté d’accorder le vocabulaire qu’utilise l’usager dans ses recherches documentaires avec celui issu de l’analyse documentaire (métadonnées sujet). Dans le troisième chapitre, nous examinons certaines particularités liées à l’utilisation de la documentation en milieu universitaire dans le but de repérer certaines possibilités et certaines exigences de l’analyse documentaire dans un tel milieu. À partir d’éléments basés sur l’analyse des domaines d’études et sur la démarche analytico-synthétique, il s’agit d’accentuer l’interaction potentielle entre usagers et analystes documentaires sur le plan du vocabulaire utilisé de part et d’autre.

Bioethics’ Lack in Relation to Person-Centred User-Driven Health Systems Planning: A Call for Change

La tribune de l'éditeur / Editor's Soapbox

The autotelic experience : a design approach to user experience

Si les principes d’utilisabilité guident la conception de solutions de design interactif pour s’assurer que celles-ci soient « utilisables », quels principes guident la conception d’objets interactifs pour s’assurer que l’expérience subjective de l’usager (UX) soit adéquate et mémorable? Que manque-t-il au cadre de l‘UX pour expliquer, comprendre, et anticiper en tant que designer une expérience mémorable (‘an experience’; Dewey, 1934)? La question centrale est issue d’une double problématique : (1) le cadre théorique de l’UX est incomplet, et (2) les processus et capacités des designers ne sont pas considérés et utilisés à leur pleine capacité en conception UX. Pour répondre à cette question, nous proposons de compléter les modèles de l’UX avec la notion d’expérience autotélique qui appartient principalement à deux cadres théoriques ayant bien cerné l’expérience subjective, soit l’expérience optimale (ou Flow) de Csikszentmihalyi (1988) et l’expérience esthétique selon Schaeffer (2001). L’autotélie est une dimension interne du Flow alors qu’elle couvre toute l’expérience esthétique. L’autotélie est une expérience d’éveil au moment même de l’interaction. Cette prise de conscience est accompagnée d’une imperceptible tension de vouloir faire durer ce moment pour faire durer le plaisir qu’il génère. Trois études exploratoires ont été faites, s’appuyant sur une analyse faite à partir d’un cadre théorique en trois parties : le Flow, les signes d’activité non verbale (les gestes physiques) et verbale (le discours) ont été évalués pour voir comment ceux-ci s’associent. Nos résultats tendent à prouver que les processus spatiaux jouent un rôle de premier plan dans l’expérience autotélique et par conséquent dans une UX optimale. De plus, ils suggèrent que les expériences pragmatique et autotélique sont ancrées dans un seul et même contenu, et que leur différence tient au type d’attention que le participant porte sur l’interaction, l’attention ordinaire ou de type autotélique. Ces résultats nous ont menés à proposer un modèle pour la conception UX. L’élément nouveau, resté jusqu’alors inaperçu, consiste à s’assurer que l’interface (au sens large) appelle une attitude réceptive à l’inattendu, pour qu’une information puisse déclencher les processus spatiaux, offrant une opportunité de passer de l’attention ordinaire à l’attention autotélique. Le nouveau modèle ouvre la porte à une meilleure valorisation des habiletés et processus du designer au sein de l’équipe multidisciplinaire en conception UX.

Multi-user bidirectional communication using isochronal synchronisation of array of chaotic directly modulated semiconductor lasers

Isochronal synchronisation between the elements of an array of three mutually coupled directly modulated semiconductor lasers is utilized for the purpose of simultaneous bidirectional secure communication. Chaotic synchronisation is achieved by adding the coupling signal to the self feedback signal provided to each element of the array. A symmetric coupling is effective in inducing synchronisation between the elements of the array. This coupling scheme provides a direct link between every pair of elements thus making the method suitable for simultaneous bidirectional communication between them. Both analog and digital messages are successfully encrypted and decrypted simultaneously by each element of the array.

Analysis and Optimization of Machining Process Using Evolutionary Algorithms

To ensure quality of machined products at minimum machining costs and maximum machining effectiveness, it is very important to select optimum parameters when metal cutting machine tools are employed. Traditionally, the experience of the operator plays a major role in the selection of optimum metal cutting conditions. However, attaining optimum values each time by even a skilled operator is difficult. The non-linear nature of the machining process has compelled engineers to search for more effective methods to attain optimization. The design objective preceding most engineering design activities is simply to minimize the cost of production or to maximize the production efficiency. The main aim of research work reported here is to build robust optimization algorithms by exploiting ideas that nature has to offer from its backyard and using it to solve real world optimization problems in manufacturing processes.In this thesis, after conducting an exhaustive literature review, several optimization techniques used in various manufacturing processes have been identified. The selection of optimal cutting parameters, like depth of cut, feed and speed is a very important issue for every machining process. Experiments have been designed using Taguchi technique and dry turning of SS420 has been performed on Kirlosker turn master 35 lathe. Analysis using S/N and ANOVA were performed to find the optimum level and percentage of contribution of each parameter. By using S/N analysis the optimum machining parameters from the experimentation is obtained.Optimization algorithms begin with one or more design solutions supplied by the user and then iteratively check new design solutions, relative search spaces in order to achieve the true optimum solution. A mathematical model has been developed using response surface analysis for surface roughness and the model was validated using published results from literature.Methodologies in optimization such as Simulated annealing (SA), Particle Swarm Optimization (PSO), Conventional Genetic Algorithm (CGA) and Improved Genetic Algorithm (IGA) are applied to optimize machining parameters while dry turning of SS420 material. All the above algorithms were tested for their efficiency, robustness and accuracy and observe how they often outperform conventional optimization method applied to difficult real world problems. The SA, PSO, CGA and IGA codes were developed using MATLAB. For each evolutionary algorithmic method, optimum cutting conditions are provided to achieve better surface finish.The computational results using SA clearly demonstrated that the proposed solution procedure is quite capable in solving such complicated problems effectively and efficiently. Particle Swarm Optimization (PSO) is a relatively recent heuristic search method whose mechanics are inspired by the swarming or collaborative behavior of biological populations. From the results it has been observed that PSO provides better results and also more computationally efficient.Based on the results obtained using CGA and IGA for the optimization of machining process, the proposed IGA provides better results than the conventional GA. The improved genetic algorithm incorporating a stochastic crossover technique and an artificial initial population scheme is developed to provide a faster search mechanism. Finally, a comparison among these algorithms were made for the specific example of dry turning of SS 420 material and arriving at optimum machining parameters of feed, cutting speed, depth of cut and tool nose radius for minimum surface roughness as the criterion. To summarize, the research work fills in conspicuous gaps between research prototypes and industry requirements, by simulating evolutionary procedures seen in nature that optimize its own systems.

Nutritional studies in juvenile penaeus indicus with fererence to protein and vitamin requirements

Man in his quest to explore food has turned towards the oceans and during the last five decades there has been phenomenal increase in the exploitation of the marine fisheries resources. The present study is carried out to determine the requirement of protein and water-soluble vitamins in the diet of juveniles of the Indian white prawn p.indicus using purified diets and to evaluate the nutritive value of a few plant and animal protein sources for the same species. A total of ten statistically designed experiments are conducted in the laboratory undermost identical conditions and following similar methodologies. The study also tries to suggest the essential and optimal requirements for protein as well as water-soluble vitamins in the diet of juvenile p.indicus

Nutritional Requirements Of The Fry Of Gold-Spot Mullet Liza Parsa (Hamilton)

Most tropical aquatic environments are naturally fertile and their natural fertility is renewed very rapidly. Natural food for many cultivable organisms can be grown to the maximum by proper management. However, enrichment of the environment can be done through rational fertilization. Still further increase in stocking rates, can yield increased crop if adequate feeding is done. Thus fish and shellfish nutrition is an important aspect of the multidisciplinary subject of aquaculture. The oldest and most classical studies in physiology have investigated the nutritional needs of the species of interest to aquaculture. The alimentary requirements for proteins, lipids, mineral salts and vitamins have been established for some temperate species. But, the nutritional requirements of only few tropical species have been studied. Before formulating a diet, a thorough knowledge of the nutrient requirement of the species is essential. It is against this background that the present area of investigation has been identified. "Nutritional requirements of the fry of gold-spot mullet Liza parsia" is a comprehensive attempt to quantify the nutritional factors that are essential for producing healthy fingerlings for stocking the farms. Aspects such as the protein and lipid requirements of the fry, the vitamin essentiality, nutritive evaluation of protein and lipid sources suitable for compounding diets were covered in this research project. The ultimate aim has been to evolve practical diets which could be applied in the nursery phase for juvenile production.

Studies on the evaluation of different sources of proteins, carbohydrates and mineral requirements for juvenile penaeid prawn Penaeus Indicus H. Milne Edwards

In India, directed research on penaeid prawn nutrition was taken up only recently when the aquaculture of prawns gained momentum. One of the important penaeid prawns sought for culture and has great potential is Penagus indiggs, H.Milne Edwards. The Central Marine Fisheries Research Institute working on different aspects of culture of this species over the past one and half decades, has developed a hatchery technology for mass production of its seed and has suggested several improvements on its farming in the grow-out systems. One of the areas of active research in this direction has been on the nutrition of the species with a view to develop suitable feed not only for hatchery production of seed, but also in the field culture. As part of this investigation, the present study, on the evaluation of different protein and carbohydrate sources and mineral requirements for the juvenile E, indicus was taken up and the results obtained are embodied in the thesis

Optimum growth requirements of nitrifying consortia developed from treated sewage

The optimum growth requirements of two nitrifying consortia developed from treated sewage by enrichment technique were determined by a series of experiments. There was total inhibition of nitrification at above 2.75 g r' NH/- Nand 2.5g r' N02' - N and the ammonia oxidizing consortium preferred a pH at 8.5 and the nitrite oxidizing consortium a pH of 7.5 as the optima for nitrification. Optimum temperatures were between 20° and 30°C for both the groups. As the rate of airnow was increased from I to 7 Ilmin, the build-up of N02- -N increased 10-fold and the consumption of N02- -N increased by a factor of 28.8 implying that the ammonia oxidizing consortium in a bioreactor required three times more aeration than that for nitrite oxidizers for ex pressing their full nitrifying potential. These data directly contribute for developing a fermentati on process for the mass production of nitrifiers as well as for designing bio reactors for nitrifying sewage.

A study of information-seeking behavior and user perceptions of academic researchers

The purpose of this paper is to examine the information-seeking behavior of science and social science research scholars, including service effectiveness, satisfaction level on different type of sources and various methods adopted by the scholars for keeping up to dateData were gathered using a questionnaire survey of 200, randomly selected, PhD students of science and social science departments of four universities in Kerala, IndiaAlthough similarities exist between social science and science PhD students with regard to information-seeking behavior, there are significant differences as well. There is a significant difference between science and social science scholars on the perception of the adequacy of print journals and database collection which are very relevant to the research purposes. There is no significant difference between science and social science scholars on the perception of the adequacy of e-journals, the most used source for keeping up to date. The study proved that scholars of both the fields are dissatisfied with the effectiveness of the library in keeping them up to date with latest developments

Modelling and simulation of a photovoltaic fuel cell hybrid system

A stand-alone power system is an autonomous system that supplies electricity to the user load without being connected to the electric grid. This kind of decentralized system is frequently located in remote and inaccessible areas. It is essential for about one third of the world population which are living in developed or isolated regions and have no access to an electricity utility grid. The most people live in remote and rural areas, with low population density, lacking even the basic infrastructure. The utility grid extension to these locations is not a cost effective option and sometimes technically not feasible. The purpose of this thesis is the modelling and simulation of a stand-alone hybrid power system, referred to as “hydrogen Photovoltaic-Fuel Cell (PVFC) hybrid system”. It couples a photovoltaic generator (PV), an alkaline water electrolyser, a storage gas tank, a proton exchange membrane fuel cell (PEMFC), and power conditioning units (PCU) to give different system topologies. The system is intended to be an environmentally friendly solution since it tries maximising the use of a renewable energy source. Electricity is produced by a PV generator to meet the requirements of a user load. Whenever there is enough solar radiation, the user load can be powered totally by the PV electricity. During periods of low solar radiation, auxiliary electricity is required. An alkaline high pressure water electrolyser is powered by the excess energy from the PV generator to produce hydrogen and oxygen at a pressure of maximum 30bar. Gases are stored without compression for short- (hourly or daily) and long- (seasonal) term. A proton exchange membrane (PEM) fuel cell is used to keep the system’s reliability at the same level as for the conventional system while decreasing the environmental impact of the whole system. The PEM fuel cell consumes gases which are produced by an electrolyser to meet the user load demand when the PV generator energy is deficient, so that it works as an auxiliary generator. Power conditioning units are appropriate for the conversion and dispatch the energy between the components of the system. No batteries are used in this system since they represent the weakest when used in PV systems due to their need for sophisticated control and their short lifetime. The model library, ISET Alternative Power Library (ISET-APL), is designed by the Institute of Solar Energy supply Technology (ISET) and used for the simulation of the hybrid system. The physical, analytical and/or empirical equations of each component are programmed and implemented separately in this library for the simulation software program Simplorer by C++ language. The model parameters are derived from manufacturer’s performance data sheets or measurements obtained from literature. The identification and validation of the major hydrogen PVFC hybrid system component models are evaluated according to the measured data of the components, from the manufacturer’s data sheet or from actual system operation. Then, the overall system is simulated, at intervals of one hour each, by using solar radiation as the primary energy input and hydrogen as energy storage for one year operation. A comparison between different topologies, such as DC or AC coupled systems, is carried out on the basis of energy point of view at two locations with different geographical latitudes, in Kassel/Germany (Europe) and in Cairo/Egypt (North Africa). The main conclusion in this work is that the simulation method of the system study under different conditions could successfully be used to give good visualization and comparison between those topologies for the overall performance of the system. The operational performance of the system is not only depending on component efficiency but also on system design and consumption behaviour. The worst case of this system is the low efficiency of the storage subsystem made of the electrolyser, the gas storage tank, and the fuel cell as it is around 25-34% at Cairo and 29-37% at Kassel. Therefore, the research for this system should be concentrated in the subsystem components development especially the fuel cell.

Konzeption eines generischen Vorgehensmodells zur strategieorientierten und partizipativen Einführung komplexer Softwaresysteme unter Berücksichtigung organisatorischer Gestaltungsprozesse

Die Dissertation befasst sich mit der Einführung komplexer Softwaresysteme, die, bestehend aus einer Kombination aus parametrisierter Standardsoftware gepaart mit Wettbewerbsvorteil sichernden Individualsoftwarekomponenten, keine Software-Engineering-Projekte im klassischen Sinn mehr darstellen, sondern einer strategieorientierten Gestaltung von Geschäftsprozessen und deren Implementierung in Softwaresystemen bedürfen. Die Problemstellung einer adäquaten Abwägung zwischen TCO-optimierender Einführung und einer gleichzeitigen vollständigen Unterstützung der kritischen Erfolgsfaktoren des Unternehmens ist hierbei von besonderer Bedeutung. Der Einsatz integrierter betriebswirtschaftlicher Standardsoftware, mit den Möglichkeiten einer TCO-Senkung, jedoch ebenfalls der Gefahr eines Verlustes von Alleinstellungsmerkmalen am Markt durch Vereinheitlichungstendenzen, stellt ein in Einführungsprojekten wesentliches zu lösendes Problem dar, um Suboptima zu vermeiden. Die Verwendung von Vorgehensmodellen, die sich oftmals an klassischen Softwareentwicklungsprojekten orientieren oder vereinfachte Phasenmodelle für das Projektmanagement darstellen, bedingt eine fehlende Situationsadäquanz in den Detailsituationen der Teilprojekte eines komplexen Einführungsprojektes. Das in dieser Arbeit entwickelte generische Vorgehensmodell zur strategieorientierten und partizipativen Einführung komplexer Softwaresysteme im betriebswirtschaftlichen Anwendungsbereich macht - aufgrund der besonders herausgearbeiteten Ansätze zu einer strategieorientierten Einführung, respektive Entwicklung derartiger Systeme sowie aufgrund der situationsadäquaten Vorgehensstrategien im Rahmen der Teilprojektorganisation � ein Softwareeinführungsprojekt zu einem Wettbewerbsfaktor stärkenden, strategischen Element im Unternehmen. Die in der Dissertation diskutierten Überlegungen lassen eine Vorgehensweise präferieren, die eine enge Verschmelzung des Projektes zur Organisationsoptimierung mit dem Softwareimplementierungsprozess impliziert. Eine Priorisierung der Geschäftsprozesse mit dem Ziel, zum einen bei Prozessen mit hoher wettbewerbsseitiger Priorität ein organisatorisches Suboptimum zu vermeiden und zum anderen trotzdem den organisatorischen Gestaltungs- und den Systemimplementierungsprozess schnell und ressourcenschonend durchzuführen, ist ein wesentliches Ergebnis der Ausarbeitungen. Zusätzlich führt die Ausgrenzung weiterer Prozesse vom Einführungsvorgang zunächst zu einem Produktivsystem, welches das Unternehmen in den wesentlichen Punkten abdeckt, das aber ebenso in späteren Projektschritten zu einem System erweitert werden kann, welches eine umfassende Funktionalität besitzt. Hieraus ergeben sich Möglichkeiten, strategischen Anforderungen an ein modernes Informationssystem, das die kritischen Erfolgsfaktoren eines Unternehmens konsequent unterstützen muss, gerecht zu werden und gleichzeitig ein so weit als möglich ressourcenschonendes, weil die Kostenreduktionsaspekte einer Standardlösung nutzend, Projekt durchzuführen. Ein weiterer wesentlicher Aspekt ist die situationsadäquate Modellinstanziierung, also die projektspezifische Anpassung des Vorgehensmodells sowie die situationsadäquate Wahl der Vorgehensweisen in Teilprojekten und dadurch Nutzung der Vorteile der verschiedenen Vorgehensstrategien beim konkreten Projektmanagement. Der Notwendigkeit der Entwicklung einer Projektorganisation für prototypingorientiertes Vorgehen wird in diesem Zusammenhang ebenfalls Rechnung getragen. Die Notwendigkeit der Unternehmen, sich einerseits mit starken Differenzierungspotenzialen am Markt hervorzuheben und andererseits bei ständig sinkenden Margen einer Kostenoptimierung nachzukommen, lässt auch in Zukunft das entwickelte Modell als erfolgreich erscheinen. Hinzu kommt die Tendenz zu Best-Of-Breed-Ansätzen und komponentenbasierten Systemen im Rahmen der Softwareauswahl, die eine ausgesprochen differenzierte Vorgehensweise in Projekten verstärkt notwendig machen wird. Durch die in das entwickelte Modell integrierten Prototyping-Ansätze wird der auch in Zukunft an Bedeutung gewinnenden Notwendigkeit der Anwenderintegration Rechnung getragen.

A User-Centric Perspective on Parallel Programming with Focus on OpenMP

The process of developing software that takes advantage of multiple processors is commonly referred to as parallel programming. For various reasons, this process is much harder than the sequential case. For decades, parallel programming has been a problem for a small niche only: engineers working on parallelizing mostly numerical applications in High Performance Computing. This has changed with the advent of multi-core processors in mainstream computer architectures. Parallel programming in our days becomes a problem for a much larger group of developers. The main objective of this thesis was to find ways to make parallel programming easier for them. Different aims were identified in order to reach the objective: research the state of the art of parallel programming today, improve the education of software developers about the topic, and provide programmers with powerful abstractions to make their work easier. To reach these aims, several key steps were taken. To start with, a survey was conducted among parallel programmers to find out about the state of the art. More than 250 people participated, yielding results about the parallel programming systems and languages in use, as well as about common problems with these systems. Furthermore, a study was conducted in university classes on parallel programming. It resulted in a list of frequently made mistakes that were analyzed and used to create a programmers' checklist to avoid them in the future. For programmers' education, an online resource was setup to collect experiences and knowledge in the field of parallel programming - called the Parawiki. Another key step in this direction was the creation of the Thinking Parallel weblog, where more than 50.000 readers to date have read essays on the topic. For the third aim (powerful abstractions), it was decided to concentrate on one parallel programming system: OpenMP. Its ease of use and high level of abstraction were the most important reasons for this decision. Two different research directions were pursued. The first one resulted in a parallel library called AthenaMP. It contains so-called generic components, derived from design patterns for parallel programming. These include functionality to enhance the locks provided by OpenMP, to perform operations on large amounts of data (data-parallel programming), and to enable the implementation of irregular algorithms using task pools. AthenaMP itself serves a triple role: the components are well-documented and can be used directly in programs, it enables developers to study the source code and learn from it, and it is possible for compiler writers to use it as a testing ground for their OpenMP compilers. The second research direction was targeted at changing the OpenMP specification to make the system more powerful. The main contributions here were a proposal to enable thread-cancellation and a proposal to avoid busy waiting. Both were implemented in a research compiler, shown to be useful in example applications, and proposed to the OpenMP Language Committee.

Master Plan for Renewable Energy based Electricity Generation in The Gambia

The principal objective of this paper is to develop a methodology for the formulation of a master plan for renewable energy based electricity generation in The Gambia, Africa. Such a master plan aims to develop and promote renewable sources of energy as an alternative to conventional forms of energy for generating electricity in the country. A tailor-made methodology for the preparation of a 20-year renewable energy master plan focussed on electricity generation is proposed in order to be followed and verified throughout the present dissertation, as it is applied for The Gambia. The main input data for the proposed master plan are (i) energy demand analysis and forecast over 20 years and (ii) resource assessment for different renewable energy alternatives including their related power supply options. The energy demand forecast is based on a mix between Top-Down and Bottom-Up methodologies. The results are important data for future requirements of (primary) energy sources. The electricity forecast is separated in projections at sent-out level and at end-user level. On the supply side, Solar, Wind and Biomass, as sources of energy, are investigated in terms of technical potential and economic benefits for The Gambia. Other criteria i.e. environmental and social are not considered in the evaluation. Diverse supply options are proposed and technically designed based on the assessed renewable energy potential. This process includes the evaluation of the different available conversion technologies and finalizes with the dimensioning of power supply solutions, taking into consideration technologies which are applicable and appropriate under the special conditions of The Gambia. The balance of these two input data (demand and supply) gives a quantitative indication of the substitution potential of renewable energy generation alternatives in primarily fossil-fuel-based electricity generation systems, as well as fuel savings due to the deployment of renewable resources. Afterwards, the identified renewable energy supply options are ranked according to the outcomes of an economic analysis. Based on this ranking, and other considerations, a 20-year investment plan, broken down into five-year investment periods, is prepared and consists of individual renewable energy projects for electricity generation. These projects included basically on-grid renewable energy applications. Finally, a priority project from the master plan portfolio is selected for further deeper analysis. Since solar PV is the most relevant proposed technology, a PV power plant integrated to the fossil-fuel powered main electrical system in The Gambia is considered as priority project. This project is analysed by economic competitiveness under the current conditions in addition to sensitivity analysis with regard to oil and new-technology market conditions in the future.