Monitoring of down-hole parameters for early kick detection

The sudden hydrocarbon influx from the formation into the wellbore poses a serious risk to the safety of the well. This sudden influx is termed a kick, which, if not controlled, may lead to a blowout. Therefore, early detection of the kick is crucial to minimize the possibility of a blowout occurrence. There is a high probability of delay in kick detection, apart from other issues when using a kick detection system that is exclusively based on surface monitoring. Down-hole monitoring techniques have a potential to detect a kick at its early stage. Down-hole monitoring could be particularly beneficial when the influx occurs as a result of a lost circulation scenario. In a lost circulation scenario, when the down-hole pressure becomes lower than the formation pore pressure, the formation fluid may starts to enter the wellbore. The lost volume of the drilling fluid is compensated by the formation fluid flowing into the well bore, making it difficult to identify the kick based on pit (mud tank) volume observations at the surface. This experimental study investigates the occurrence of a kick based on relative changes in the mass flow rate, pressure, density, and the conductivity of the fluid in the down-hole. Moreover, the parameters that are most sensitive to formation fluid are identified and a methodology to detect a kick without false alarms is reported. Pressure transmitter, the Coriolis flow and density meter, and the conductivity sensor are employed to observe the deteriorating well conditions in the down-hole. These observations are used to assess the occurrence of a kick and associated blowout risk. Monitoring of multiple down-hole parameters has a potential to improve the accuracy of interpretation related to kick occurrence, reduces the number of false alarms, and provides a broad picture of down-hole conditions. The down-hole monitoring techniques have a potential to reduce the kick detection period. A down-hole assembly of the laboratory scale drilling rig model and kick injection setup were designed, measuring instruments were acquired, a frame was fabricated, and the experimental set-up was assembled and tested. This set-up has the necessary features to evaluate kick events while implementing down-hole monitoring techniques. Various kick events are simulated on the drilling rig model. During the first set of experiments compressed air (which represents the formation fluid) is injected with constant pressure margin. In the second set of experiments the compressed air is injected with another pressure margin. The experiments are repeated with another pump (flow) rate as well. This thesis consists of three main parts. The first part gives the general introduction, motivation, outline of the thesis, and a brief description of influx: its causes, various leading and lagging indicators, and description of the several kick detection systems that are in practice in the industry. The second part describes the design and construction of the laboratory scale down-hole assembly of the drilling rig and kick injection setup, which is used to implement the proposed methodology for early kick detection. The third part discusses the experimental work, describes the methodology for early kick detection, and presents experimental results that show how different influx events affect the mass flow rate, pressure, conductivity, and density of the fluid in the down-hole, and the discussion of the results. The last chapter contains summary of the study and future research.

At surface behaviour of juvenile and female southern elephant seals from King George Island from expeditions JUB1996 and JUB1997

Between December 1996 and February 1997, weaned pups and postmoult female southern elephant seals (Mirounga leonina) were fitted with satellite transmitters at King George Island (South Shetlands). Of the nine adult females tracked for more than two months, three stayed in a localized area between the South Shetlands and the South Orkneys. The other six females travelled southwest along the coast of the Antarctic Peninsula up to the Bellingshausen Sea. Two of them then moved far northeast and hauled out on South Georgia in October. One female was last located north of the South Shetlands in March 1998. In total, eight females were again sighted on King George Island and six of the transmitters removed. The tracks of the weaners contrasted with those of the adults. In January, five juveniles left King George Island for the Pacific sector ranging about four weeks in the open sea west of the De Gerlache Seamounts. Three of them returned to the tip of the Antarctic Peninsula in June, of which one was last located on the Patagonian Shelf in November 1997. A computer animation was developed to visualize the animal movements in relation to the extent and concentration of sea ice. The juveniles avoided sea ice while the adults did not. The latter displayed behavioural differences in using the pack ice habitat during winter. Some females adjusted their movement patterns to the pulsating sea ice fringe in far-distant foraging areas while others ranged in closed pack ice of up to 100 %. The feeding grounds of adult female elephant seals are more closely associated with the pack ice zone than previously assumed.

Dive depth profile and at surface behaviour data of emperor penguins from Pointe Géologie, Adélie Land, Antarctica, from expedition DDU 2005

Adult male and female emperor penguins (Aptenodytes forsteri) were fitted with satellite transmitters at Pointe-Géologie (Adélie Land), Dumont d'Urville Sea coast, in November 2005. Nine of 30 data sets were selected for analyses to investigate the penguins' diving behaviour at high resolution (doi:10.1594/PANGAEA.633708, doi:10.1594/PANGAEA.633709, doi:10.1594/PANGAEA.633710, doi:10.1594/PANGAEA.633711). The profiles are in synchrony with foraging trips of the birds during austral spring (doi:10.1594/PANGAEA.472171, doi:10.1594/PANGAEA.472173, doi:10.1594/PANGAEA.472164, doi:10.1594/PANGAEA.472160, doi:10.1594/PANGAEA.472161). Corresponding high resolution winter data (n = 5; archived elsewhere) were provided by A. Ancel, Centre d'Ecologie et Physiologie Energétiques, CNRS, Strasbourg, France. Air-breathing divers tend to increase their overall dive duration with increasing dive depth. In most penguin species, this occurs due to increasing transit (descent and ascent) durations but also because the duration of the bottom phase of the dive increases with increasing depth. We interpreted the efficiency with which emperor penguins can exploit different diving depths by analysing dive depth profile data of nine birds studied during the early and late chick-rearing period in Adélie Land, Antarctica. Another eight datasets of dive depth and duration frequency recordings (doi:10.1594/PANGAEA.472150, doi:10.1594/PANGAEA.472152, doi:10.1594/PANGAEA.472154, doi:10.1594/PANGAEA.472155, doi:10.1594/PANGAEA.472142, doi:10.1594/PANGAEA.472144, doi:10.1594/PANGAEA.472146, doi:10.1594/PANGAEA.472147), which backup the analysed high resolution depth profile data, and dive depth and duration frequency recordings of another bird (doi:10.1594/PANGAEA.472156, doi:10.1594/PANGAEA.472148) did not match the requirement of high resolution for analyses. Eleven additional data sets provide information on the overall foraging distribution of emperor penguins during the period analysed (doi:10.1594/PANGAEA.472157, doi:10.1594/PANGAEA.472158, doi:10.1594/PANGAEA.472162, doi:10.1594/PANGAEA.472163, doi:10.1594/PANGAEA.472166, doi:10.1594/PANGAEA.472167, doi:10.1594/PANGAEA.472168, doi:10.1594/PANGAEA.472170, doi:10.1594/PANGAEA.472172, doi:10.1594/PANGAEA.472174, doi:10.1594/PANGAEA.472175).

All-analogue real-time filter bank OFDM over 50 Km of SSMF using a novel synchronization technique

A 21.6 Gbit/s 1.78 bit/s/Hz OFDM signal is transmitted over 50 Km of fiber without using DSP in the transmitter or the receiver. The synchronization scheme only requires one PLL to synchronize all the subcarriers.

Impact of optical phase conjugation on the Shannon capacity limit

Compensation of the detrimental impacts of nonlinearity on long haul wavelength division multiplexed system performance is discussed, and the difference between transmitter, receiver and in-line compensation analyzed. The impact of system imperfections is also outlined.

Impact of optical phase conjugation on the nonlinear Shannon limit

Compensation of the detrimental impacts of nonlinearity on long-haul wavelength division multiplexed system performance is discussed, and the difference between transmitter, receiver and in-line compensation analyzed. We demonstrate that ideal compensation of nonlinear noise could result in an increase in the signal-to-noise ratio (measured in dB) of 50%, and that reaches may be more than doubled for higher order modulation formats. The influence of parametric noise amplification is discussed in detail, showing how increased numbers of optical phase conjugators may further increase the received signal-tonoise ratio. Finally the impact of practical real world system imperfections, such as polarization mode dispersion, are outlined.

Using Coding to Improve Localization and Backscatter Communication Performance in Low-Power Sensor Networks

Backscatter communication is an emerging wireless technology that recently has gained an increase in attention from both academic and industry circles. The key innovation of the technology is the ability of ultra-low power devices to utilize nearby existing radio signals to communicate. As there is no need to generate their own energetic radio signal, the devices can benefit from a simple design, are very inexpensive and are extremely energy efficient compared with traditional wireless communication. These benefits have made backscatter communication a desirable candidate for distributed wireless sensor network applications with energy constraints.

The backscatter channel presents a unique set of challenges. Unlike a conventional one-way communication (in which the information source is also the energy source), the backscatter channel experiences strong self-interference and spread Doppler clutter that mask the information-bearing (modulated) signal scattered from the device. Both of these sources of interference arise from the scattering of the transmitted signal off of objects, both stationary and moving, in the environment. Additionally, the measurement of the location of the backscatter device is negatively affected by both the clutter and the modulation of the signal return.

This work proposes a channel coding framework for the backscatter channel consisting of a bi-static transmitter/receiver pair and a quasi-cooperative transponder. It proposes to use run-length limited coding to mitigate the background self-interference and spread-Doppler clutter with only a small decrease in communication rate. The proposed method applies to both binary phase-shift keying (BPSK) and quadrature-amplitude modulation (QAM) scheme and provides an increase in rate by up to a factor of two compared with previous methods.

Additionally, this work analyzes the use of frequency modulation and bi-phase waveform coding for the transmitted (interrogating) waveform for high precision range estimation of the transponder location. Compared to previous methods, optimal lower range sidelobes are achieved. Moreover, since both the transmitted (interrogating) waveform coding and transponder communication coding result in instantaneous phase modulation of the signal, cross-interference between localization and communication tasks exists. Phase discriminating algorithm is proposed to make it possible to separate the waveform coding from the communication coding, upon reception, and achieve localization with increased signal energy by up to 3 dB compared with previous reported results.

The joint communication-localization framework also enables a low-complexity receiver design because the same radio is used both for localization and communication.

Simulations comparing the performance of different codes corroborate the theoretical results and offer possible trade-off between information rate and clutter mitigation as well as a trade-off between choice of waveform-channel coding pairs. Experimental results from a brass-board microwave system in an indoor environment are also presented and discussed.

Accumulation of organic carbon in the Laptev Sea

Composition and accumulation rates of organic carbon in Holocene sediments provided data to calculate an organic carbon budget for the Laptev Sea continental margin. Mean Holocene accumulation rates in the inner Laptev Sea vary between 0.14 and 2.7 g C cm**2/ky; maximum values occur close to the Lena River delta. Seawards, the mean accumulation rates decrease from 0.43 to 0.02 g C cm**2/ky. The organic matter is predominantly of terrigenous origin. About 0.9*10**6 t/year of organic carbon are buried in the Laptev Sea, and 0.25*10**6 t/year on the continental slope. Between about 8.5 and 9 ka, major changes in supply of terrigenous and marine organic carbon occur, related to changes in coastal erosion, Siberian river discharge, and/or Atlantic water inflow along the Eurasian continental margin.

Wireless Networks with Energy Harvesting and Power Transfer: Joint Power and Time Allocation

In this letter, we consider wireless powered communication networks which could operate perpetually, as the base station (BS) broadcasts energy to the multiple energy harvesting (EH) information transmitters. These employ “harvest then transmit” mechanism, as they spend all of their energy harvested during the previous BS energy broadcast to transmit the information towards the BS. Assuming time division multiple access (TDMA), we propose a novel transmission scheme for jointly optimal allocation of the BS broadcasting power and time sharing among the wireless nodes, which maximizes the overall network throughput, under the constraint of average transmit power and maximum transmit power at the BS. The proposed scheme significantly outperforms “state of the art” schemes that employ only the optimal time allocation. If a single EH transmitter is considered, we generalize the optimal solutions for the case of fixed circuit power consumption, which refers to a much more practical scenario.