School Bus Safety Study: Kadyn’s Law, December 2012

In 2012, the Iowa legislature passed a bill for an act relating to school bus safety, including providing penalties for failure to obey school bus warning lamps and stop signal arms, providing for a school bus safety study and administrative remedies, and making an appropriation. The bill, referred to as Iowa Senate File (SF) 2218 or “Kadyn’s Law,” became effective March 16, 2012. A multiagency committee addressed three specific safety study elements of Kadyn’s Law as follows: * Use of cameras mounted on school buses to enhance the safety of children riding the buses and aid in enforcement of motor vehicle laws pertaining to stop-arm violations * Feasibility of requiring school children to be picked up and dropped off on the side of the road on which their home is located * Inclusion of school bus safety as a priority in driver training curriculum This report summarizes the findings for each of these topics.

Prevalence of Acute Coronary Syndrome in Patients Suspected for Pulmonary Embolism or Acute Aortic Syndromes: Rational for "Double" and "Triple" Rule-Out Concepts

PURPOSE To evaluate the prevalence of acute coronary syndrome (ACS) in patients presenting initially with atypical chest pain and suspected to have pulmonary embolism (PE) or acute aortic syndromes (AAS). To evaluate the overlap between ACS, PE and AAS in routine practice and determine how many patients could have benefit from a single CT protocol to rule out ACS at the same time as PE and AAS. METHOD AND MATERIALS Our electronic hospital database revealed 1122 consecutive patients who underwent a thoracic CT angiography for PE or AAS from 2004 to 2006 (mean age, 63±13 years). Patients without chest pain were excluded from this study. Thus, 447 patients presented with isolated atypical chest were included in the analysis. All patients who underwent a thoracic CT scan previously received standard clinical care and were initially considered as non ACS. The final diagnosis was obtained by the hospital stay report. RESULTS Among the 447 patients with atypical chest pain, 25 (5.5%) were finally found to have ACS: 19 patients (4.2%) were suspected for PE and 6 (1. 3%) were suspected for AAS. There were 90 patients diagnosed to have PE, 89 (98.8%) of them were suspected for PE while only 1 (1%) was suspected for AAS. Eleven patients diagnosed to have AAS, 9 (82%) of them were suspected for AAS while 2 (18%) were suspected for PE. CONCLUSION In clinical practice, the overlap between PE, AAS and ACS is limited which make the triple rule-out studies less recommended to be done at the time being because of the high dose radiation. A double rule-out investigation is suggested to be done for patients being evaluated for atypical chest pain and suspected of having AAS or PE because of a significant overlap between the two entities as well it doesn't implicate any increment in radiation dose. CLINICAL RELEVANCE/APPLICATION With 64-slice CT, coronary circulation and total chest can be evaluated at the same time offering new opportunitie for the evaluation of three major life-threatening conditions :ACS,PE and AAS.

Nouveautés dans la physiopathologie, le diagnostic et le traitement de la douleur neuropathique [New concepts in the pathophysiology, diagnosis and treatment of neuropathic pain].

We here summarize five articles bringing new advances in our knowledge on neuropathic pain and put them into perspective with our current understanding. The first uses a mechanism-based approach with a capsaicin test to stratify patients suffering from painful diabetic neuropathy before starting a topical clonidine treatment. The second reviews disinhibition as a critical mechanism and a promising target for chronic pain. The third evokes neuroglial interactions and its implication regarding the interplay between injuries in childhood and hypersensitivity in adulthood. The last articles remind us that interventional therapies, not always very invasive, have a future potential in the therapy of frequent conditions such as head pain disorders.

Report on the Iowa Law Enforcement Academy for the year ended June 30, 2012

Report on the Iowa Law Enforcement Academy for the year ended June 30, 2012

Integration of Bridge Damage Detection Concepts and Components (3 volumes), TR-636, 2013

This work is divided into three volumes: Volume I: Strain-Based Damage Detection; Volume II: Acceleration-Based Damage Detection; Volume III: Wireless Bridge Monitoring Hardware. Volume I: In this work, a previously-developed structural health monitoring (SHM) system was advanced toward a ready-for-implementation system. Improvements were made with respect to automated data reduction/analysis, data acquisition hardware, sensor types, and communication network architecture. The statistical damage-detection tool, control-chart-based damage-detection methodologies, were further investigated and advanced. For the validation of the damage-detection approaches, strain data were obtained from a sacrificial specimen attached to the previously-utilized US 30 Bridge over the South Skunk River (in Ames, Iowa), which had simulated damage,. To provide for an enhanced ability to detect changes in the behavior of the structural system, various control chart rules were evaluated. False indications and true indications were studied to compare the damage detection ability in regard to each methodology and each control chart rule. An autonomous software program called Bridge Engineering Center Assessment Software (BECAS) was developed to control all aspects of the damage detection processes. BECAS requires no user intervention after initial configuration and training. Volume II: In this work, a previously developed structural health monitoring (SHM) system was advanced toward a ready-for-implementation system. Improvements were made with respect to automated data reduction/analysis, data acquisition hardware, sensor types, and communication network architecture. The objective of this part of the project was to validate/integrate a vibration-based damage-detection algorithm with the strain-based methodology formulated by the Iowa State University Bridge Engineering Center. This report volume (Volume II) presents the use of vibration-based damage-detection approaches as local methods to quantify damage at critical areas in structures. Acceleration data were collected and analyzed to evaluate the relationships between sensors and with changes in environmental conditions. A sacrificial specimen was investigated to verify the damage-detection capabilities and this volume presents a transmissibility concept and damage-detection algorithm that show potential to sense local changes in the dynamic stiffness between points across a joint of a real structure. The validation and integration of the vibration-based and strain-based damage-detection methodologies will add significant value to Iowa’s current and future bridge maintenance, planning, and management Volume III: In this work, a previously developed structural health monitoring (SHM) system was advanced toward a ready-for-implementation system. Improvements were made with respect to automated data reduction/analysis, data acquisition hardware, sensor types, and communication network architecture. This report volume (Volume III) summarizes the energy harvesting techniques and prototype development for a bridge monitoring system that uses wireless sensors. The wireless sensor nodes are used to collect strain measurements at critical locations on a bridge. The bridge monitoring hardware system consists of a base station and multiple self-powered wireless sensor nodes. The base station is responsible for the synchronization of data sampling on all nodes and data aggregation. Each wireless sensor node include a sensing element, a processing and wireless communication module, and an energy harvesting module. The hardware prototype for a wireless bridge monitoring system was developed and tested on the US 30 Bridge over the South Skunk River in Ames, Iowa. The functions and performance of the developed system, including strain data, energy harvesting capacity, and wireless transmission quality, were studied and are covered in this volume.

How a Bill Becomes a Law, September 18, 2008

A legislative bill is a written proposal for a law. Ideas for bills come from many sources: a legislator’s constituents, businesses, government agencies, professional associations, interest groups and other state legislatures. When a legislator recognizes or is made aware of a problem which could be pursued through legislation, that idea is put into the form of a bill. In Iowa, only legislators are able to sponsor and introduce bills. Bills may be sponsored by a Senator or Representative, or by a Senate or House committee. All bills must be approved by both the Senate and the House before being sent to the Governor for final approval. When a bill is introduced by members of a legislative chamber, it must follow a process and, if passed, be sent to members in the other legislative chamber where this process is repeated. The bill and its language must be in identical form from both chambers before being sent to the Governor.

How An Idea Becomes a Law, 2008

A flow chart of how an idea becomes a law.

Supporting interdisciplinary case studies: development and implementation of a joint learning environment for students in forensic science and criminal law

Scientific reporting and communication is a challenging topic for which traditional study programs do not offer structured learning activities on a regular basis. This paper reports on the development and implementation of a web application and associated learning activities that intend to raise the awareness of reporting and communication issues among students in forensic science and law. The project covers interdisciplinary case studies based on a library of written reports about forensic examinations. Special features of the web framework, in particular a report annotation tool, support the design of various individual and group learning activities that focus on the development of knowledge and competence in dealing with reporting and communication challenges in the students' future areas of professional activity.

Toxic substances in blood: an analysis of current recommendations under a Bayesian (decision) approach

This article extends existing discussion in literature on probabilistic inference and decision making with respect to continuous hypotheses that are prevalent in forensic toxicology. As a main aim, this research investigates the properties of a widely followed approach for quantifying the level of toxic substances in blood samples, and to compare this procedure with a Bayesian probabilistic approach. As an example, attention is confined to the presence of toxic substances, such as THC, in blood from car drivers. In this context, the interpretation of results from laboratory analyses needs to take into account legal requirements for establishing the 'presence' of target substances in blood. In a first part, the performance of the proposed Bayesian model for the estimation of an unknown parameter (here, the amount of a toxic substance) is illustrated and compared with the currently used method. The model is then used in a second part to approach-in a rational way-the decision component of the problem, that is judicial questions of the kind 'Is the quantity of THC measured in the blood over the legal threshold of 1.5 μg/l?'. This is pointed out through a practical example.

Iowa Law Enforcement Academy Performance Report, FY2004

Agency Performance Report

Iowa Law Enforcement Academy Performance Report, FY2005

Agency Performance Report